Best KVM for using 2 computers with one monitor?

Hi. I am using a Dell U2711 monitor with a main, big, wonderful machine that has an nvidea display card and am considering to get an additional, small machine, to install Linux/GNU, and wondering, to use the one monitor for both computers.
So, can anyone recommend the best KVM switch for these specifications, or what am i to look for in a kvm switch, assuming i'm using CS5.5 Master COllection on the big machine and dont want to lose quality by adding the switch.
thanks

I've been using the Rosewill RKV-2DVI for about a year with an XP 32 bit machine and a W7 64 bit machine.
http://www.rosewill.com/products/1687/ProductDetail_Overview.htm
http://www.rosewill.com/Mgnt/Uploads2/AttachmentForProduct/usermanual-rkv-2dvi.pdf

Similar Messages

HT1229 what is the best method for using a iphoto with an external hard drive for greater capacity?

what is the best method for using a iphoto with an external hard drive for greater capacity?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

What is best practice for using a SAN with ASM in an 11gR2 RAC installation

I'm setting up a RAC environment. Planning on using Oracle 11g release 2 for RAC & ASM, although the db will initially be 10g r2. OS: RedHat. I have a SAN available to me and want to know the best way to utilise that via ASM.
I've chosen ASM as it allows me to store everything, including the voting and cluster registry files.
So I think I'll need three disk groups: Data (+spfile, control#1, redo#1, cluster files#1), Flashback (+control#2, redo#2, archived redo, backups, cluster files#2) and Cluster - Cluster files#3. So that last one in tiny.
The SAN and ASM are both capable of doing lots of the same work, and it's a waste to get them both to stripe & mirror.
If I let the SAN do the redundancy work, then I can minimize the data transfer to the SAN. The administrative load of managing the discs is up to the Sys Admin, rather than the DBA, so that's attractive as well.
If I let ASM do the work, it can be intelligent about the data redundacy it uses.
It looks like I should have LUN (Logical Unit Numbers) with RAID 0+1. And then mark the disk groups as extrenal redundancy.
Does this seem the best option ?
Can I avoid this third disk group just for the voting and cluster registry files ?
Am I OK to have this lower version of Oracle 10gr2 DB on a RAC 11gr2 and ASM 11gr2 ?
TIA, Duncan

Hi Duncan,
if your storage uses SAN RAID 0+1 and you use "External" redundancy, then ASM will not mirror (only stripe).
Hence theoretically 1 LUN per diskgroup would be enough. (External redundancy will also only create 1 voting disk, hence only one LUN is needed).
However there are 2 things to note:
-> Tests have shown that for the OS it is better to have multiple LUNs, since the I/O can be better handled. Therefore it is recommended to have 4 disks in a diskgroup.
-> LUNs in a diskgroup should be the same size and should have same I/O characteristica. If you now have in mind, that maybe your database one time will need more space (more disks) than you should use a disk size, which can easily be added, without waisting too much space.
E.g:
If you have a 900GB database then does it make sense to only use 1 lun with 1TB?
What happens if the database grows, but only grows slightly above 1TB? Then you should add another disk with 1TB.... You loose a lot of space.
Hence it does make more sence to use 4 disks á 250GB, since the "disks" needed to grow the disk groups can be extended more easily. (just add another 250G disk).
O.k. there is also the possibility to resize a disk in ASM, but it is a lot easier to simple add an additional lun.
PS: If you use a "NORMAL" redundancy diskgroup, then you need at least 3 disks in your diskgroup (in 3 failgroups) to be able to handle the 3 voting disks.
Hope that helps a little.
Sebastian

What is the best way to set up Facetime if using multiple computers with one apple ID?

I currently have FaceTime setup on my iPad 2 using my normal appleID, but have just recently upgraded our iMac from Leopard to Snow leopard, and have added FaceTime to that computer as well. So my question is this. If I want to avoid confusion with which device is called when someone calls us using FaceTime, what is the best way to distinguish the devices? Should I try to use a different email address to reach the iMac? Is there a best-known-method for this?

That's a nice system Kevin, and it will work very nicely with Photoshop. I do take it that you have 16Gb RAM in Total?
250Gb SSD is a good size, but you can still run short, and that will affect Windows performance. When you get your system, instal WinDirStat which gives you a graphic display of everything on your drive, like below. Clicking on any of the large areas will tell you what and where they are, so you can think about moving cache folders etc. to one of the HDDs.
Leave the Pagefile.sys on the boot drive. Think about disabling Hyphenate as it takes a ton of space, and too often crashes on wake up.
My Documents
Desktop
Downloads
Look at Bridge cache
iTunes backup
Other stuff like that.
Think about another 500Gb drive just for Photoshop Scratch. Drives are cheap as chips nowadays
Do yourself a favour, and invest $100 in Shadow Protect (or similar if there is such a thing) SP saves incremental backups every 15 minutes (you can set the interval, but it has no impact on performance with a system like yours). If you have a problem you can mount the back up at any of those 15 minute points, and open files from it. You can also make a bootable DVD image of your C drive, and be back up and running five minutes after disaster strikes.
Optimize Performance in Photoshop
Photoshop CC and CC 2014 GPU FAQ
For more ideas, swing by the Premiere Pro Hardware forum. Those guys are serious good at this stuff, and you'll find links tips and ideas.
Happy computing, and have fun with your Creative Cloud® apps.

Using two computers with one IPhone

I have two offices, and two office computers. I'd like to sync all the Outlook data on each computer with my IPhone. Also, is there any way to have the music list in ITunes in one computer sync through the IPhone to the second computer?

On the Outlook data, your best bet is to use something like Google Sync. I have three computers (one work, one home desktop, one home netbook) all synced up with my iPhone using Google. And it's free.

Best Practice for VPC Domain failover with One M2 per N7K switch and 2 sups

I Have been testing some failover scenarios with 4 nexus 7000 switches with an M2 and an F2 card in each. Each Nexus has two supervisor modules.
I have 3 VDC's Admin, F2 and M2
all ports in the M2 are in the M2 VDC and all ports on the F2 are in the F2 VDC.
All vPC's are connected on the M2 cards, configured in the M2 VDC
We have 2 Nexus representing each "site"
In one site we have a vPC domain "100"
The vPC Peer link is connected on ports E1/3 and E1/4 in Port channel 100
The peer-keepalive is configured to use the management ports. This is patched in both Sups into our 3750s. (this is will eventually be on a management out of band switch)
Please see the diagram.
There are 2 vPC's 1&2 connected at each site which represent the virtual port channels that connect back to a pair of 3750X's (the layer 2 switch icons in the diagram.)
There is also the third vPC that connects the 4 Nexus's together. (po172)
We are stretching vlan 900 across the "sites" and would like to keep spanning tree out of this as much as we can, and minimise outages based on link failures, module failures, switch failures, sup failures etc..
ONLY the management vlan (100,101) is allowed on the port-channel between the 3750's, so vlan 900 spanning tree shouldnt have to make this decision.
We are only concerned about layer two for this part of the testing.
As we are connecting the vPC peer link to only one module in each switch (a sinlge) M2 we have configured object tracking as follows:
n7k-1(config)#track 1 interface ethernet 1/1 line-protocol
n7k-1(config)#track 2 interface ethernet 1/2 line-protocol
n7k-1(config)#track 5 interface ethernet 1/5 line-protocol
track 101 list boolean OR
n7k-1(config-track)# object 1
n7k-1(config-track)# object 2
n7k-1(config-track)# object 5
n7k-1(config-track)# end
n7k-1(config)# vpc domain 101
n7k-1(config-vpc-domain)# track 101
The other site is the same, just 100 instead of 101.
We are not tracking port channel 101, not the member interfaces of this port channel as this is the peer link and apparently tracking upstream interfaces and the peer link is only necessary when you have ONE link and one module per switch.
As the interfaces we are tracking are member ports of a vPC, is this a chicken and egg scenario when seeing if these 3 interfaces are up? or is line-protocol purely layer 1 - so that the vPC isnt downing these member ports at layer 2 when it sees a local vPC domain failure, so that the track fails?
I see most people are monitoring upstream layer3 ports that connect back to a core? what about what we are doing monitoring upstream(the 3750's) & downstream layer2 (the other site) - that are part of the very vPC we are trying to protect?
We wanted all 3 of these to be down, for example if the local M2 card failed, the keepalive would send the message to the remote peer to take over.
What are the best practices here? Which objects should we be tracking? Should we also track the perr-link Port channel101?
We saw minimal outages using this design. when reloading the M2 modules, usually 1 -3 pings lost between the laptops in the diff sites across the stretched vlan. Obviously no outages when breaking any link in a vPC
Any wisdom would be greatly appreciated.
Nick

Nick,
I was not talking about the mgmt0 interface. The vlan that you are testing will have a link blocked between the two 3750 port-channel if the root is on the nexus vPC pair.
Logically your topology is like this:
| |
| Nexus Pair |
3750-1-----------------------3750-2
Since you have this triangle setup one of the links will be in blocking state for any vlan configured on these devices.
When you are talking about vPC and L3 are you talking about L3 routing protocols or just intervaln routing.
Intervlan routing is fine. Running L3 routing protocols over the peer-link and forming an adjaceny with an router upstream using L2 links is not recommended. Teh following link should give you an idea about what I am talking here:
http://bradhedlund.com/2010/12/16/routing-over-nexus-7000-vpc-peer-link-yes-and-no/
HSRP is fine.
As mentioned tracking feature purpose is to avoid block hole of traffic. It completely depends on your network setup. Don't think you would be needing to track all the interfaces.
JayaKrishna

Best way for using Property Loader with Excel

I am trying to architect a test system to run a variety of tests (DIO, AIO, PWM...etc) and I noticed that Property Loader can be quite handy. I am trying to find the best method to utilize NI TestStand Property Loader to load test properties from Excel into some sort of parameter database. The properties shall be loaded only once when the test sequence is opened. The parameters of the excel table will have a format like this:
TestType TestCondition ECUPin# Limits.High    Limits.Low Units PWM_Frequency CAN_TX   CAN_RX
DI        ON 1    0x0102   0x0304
AI    OFF    2    0             0.1                V                                0x1324   0x0405
The table will look much more complex than this one, but once I know how to do this I should be fine. Does anyone have suggestions for what I am trying to do ?
Thanks,
Ayman

There are a couple methods of thought here:
Property Loader- You can use the tool to export and import properties. The best way to do it is to export the properties that you want in the Excel file using the tool. Then make copies of the file and change the values in there. This will ensure that once the values come back into TestStand they will all go to the correct place.
FileGlobals Method- You can create a large container which has all the correct variables in it in your file globals or locals. There is an object in the TS API called a PropertyObjectFile. This file is a simple text file that contains the properties, sub properties and values of any property object in TS. You can easily just pass the container into it. The problem with this is that you then have to create a VI or some tool to edit the values in it. You can go in there and manually change them but it's not as intuitive.
Property Loader to FileGlobal Container- This would basically be a hybrid of the two. Pretty much what you described in your post. Where the property loader only has to load the container in your FileGlobals.
Which method is best? It all depends on your application. If you ever need to dynamically export the properties then you can't use the Property Loader.
One thing to remember is that you should only Import/Export properties that need to be changed in the Excel file. This will help reduce the number of properties.
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Can I use two computers with one ipod?

I would like to take my playlist with me to work on my ipod and put it onto my work computer. Can one ipod be used with two computers? I took my apple CD to work and tried it and it didn't work. Actually, I had to bring my shuffle home and restore it. any thoughts?
thanks,...

Using iPod with Multiple Computers

Using two computers with one Extigy sound c

Hello:
This is my first post; am wondering if there is a way to plug the Extigy USB input into two computers at the same time, perhaps with a USB sharing device? Has anyone ever tried this? Thanks. Glad to be part of the new community group.
PineoceanblueII

Is it possible to stream audio from two computers (one Mac and one Windows) to a single Airport Express?
Yes, but only one at a time.
Does one take precedence over the other?
No, you would need to determine which computer was streaming music at any given time.

Can I use Logic Pro 9.1.6 on two computers with one licens

I have download and install Logic Pro 9.1.6 on my MacBookPro 13". I record on location with my MacBook an wil edit and arrange the music on my iMac at home. Can I use Logic Pro 9.1.6 on two computers with one licens. I'm the owner of both computers. If it can where can I find the program on my MacBook? and how to install and register?

Hi, is the iMac also 10.6.8? I had an iMac die when 10.6.8 was installed, it worked at first but after some You Tube flash videos the screen just locked and no mouse clicking anywhere did anything. It turned out that most older iMacs [ mine was from august 2007] have a graghics chipset that can't handle Snow Leopard, there were [are?] 77 pages on this "locked screen"topic in the Snow Leopard forum. I checked out a web site that tells you how much your mac is worth by filling in the sereal number-mine was worth only $168, I may give it to a friend for his children to play with, although that seems unholy. I doubt anyone woud buy it,the problem is now so well known that even Apple certified resellars here in the Netherlands refuse to repair them,they claim Apple will revoke their certification if they replace the faulty Graphics unit,it is also VERY hard to get to that unit in an iMac, everything is so tightly packed inside.
If your iMac is running Mountain Lion[10.8.0] you may have to change the app store preference to accept apps from all sites,normally ML will only allow app store apps to be downloaded.

Use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... An

Hi...
My name is Turgay and have been using computer since 1982... 2 years ago, because of my friend's advice, i bought an iMac... It was the first Mac that i use... Till that, i was using normal PC's...
I bought an 24" iMac on July 2009 and started to use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... And it increased. Because of this i took my iMac to your authorised distributor http://www.bilkom.com.tr...
They changed my screen but in 2 months it happened 3 times and i wanted them to change my iMac with new one, under customer laws... In our country, the device must be changed with new one if the same problem occurs in 3 months. Because i know the customer satisfaction of Apple, i didn' worry about it but Bilkom refused my will... I spoke with them for 2 months but nothing happened, they just told me, it' not our problem.
Because of this speech, i sued them on June 2011... Last week, i won the case but just for the return of invoince... It costs 3.200 Turkish Liras (1.800$) and there's no 24" iMac unused... Bilkom again refused to give me an iMac... I thought that Apple's customer satisfaction can't be like this... I didn't write anything to Apple till now but if i can't get an iMac, i must return to normal PC after 2 years... And i don't want that... I offered an iMac 27" with core i7... No matter Bilkom accepts or not, they don't care of me... I'm a customer, they should do... I've never seen such a like company. I hope the real Apple will help my problem and save me from Bilkom...
Waiting for your reply... Thanks and regards...
Turgay Kala
General Manager

Unfortunately, you are not communicating with Apple here - we are all other users volunteering our time to help with technical problems.
Here is a list of Apple contacts; there is no email address - you will need to write a letter to their corporate headquarters or call them:
http://www.apple.com/contact/
Although, it appears that your problem is with a third party store and that you have won in court - did you get your money back? 24" iMacs have not been made since 2009 or 2010. Now there are 21" and 27" iMacs.

What is the best practice for using the Calendar control with the Dispatcher?

It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security. However, the Calendar relies on this endpoint to build the events for the calendar. On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works. We've noticed the same behavior on the Geometrixx site.
What is the best practice for using the Calendar control with Dispatcher?
Thanks in advance.
Scott

Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
Example: http://www.cariboowoodshop.com/wood-shop.html

What is the best way for sharing an iPad with 2 iPhones using different Apple acount ?

What is the best way for sharing an iPad with 2 iPhones using different Apple acount ?

You can't share with other devices if you are using different Apple ID's and iTunes account on them. You can only share if you use the same ID.

Using 2 iPods with one iTunes account.

I share a computer with someone who also has a iPod and we have one version of iTunes downloaded. Although we have seperate user names iTunes seems to autosync what she's put in the library to my iPod and vise-versa. We would love to share some of the files that we pay for, but we certainly don't want to share everything. Is the best option for us to just sync our files manuelly instead of auto-syncing?
Thanks

There are actually a few methods for using more than one iPod on a single computer: How To Use Multiple iPods with One Computer
Just to summarise what's in the link above which is a little out of date:
Method one is to have individual Mac or Windows user accounts which by definition would give you completely separate iTunes Music folders and libraries.
Method two is to set your preferences so that any or all of iPods get updated with only certain playlists within one library:
Loading songs onto iPod automatically - Windows
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPod. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Another option when using a single library is to set any or all of the iPods to manual update: Managing content manually on iPod

What is the best way to use EJB modules with JAX-WS?

Hi.
I am doing a project that returns EAN13 encoded data to external java clients.
I think I need to use a webservice that send response, a webservice client that send the request, and other project that transforms a data to an EAN encoded data, returns it and store it in MySql database.
It is possible that I need to authenticate users for every request made.
-I have created a EJB module contained into Glassfish for the webservice
-I have created a Common Java project with 3 layers: Entities, bussines and data access layer for mysql database
-I have a project for the webservice client with JAX-WS ( is the best choice? or Would be better JAX-RPC? )
**How would you suggest me create the structure of the project with all the java power?*
**Could you help me with goods tutorial of design patterns about webservices using EJB and the best way for use databases for this kind of projects ( I have heard about JNDI, Hibernate, Session EJB, ... )?*
**Would be better use other EJB module instead of a Common java project that has classes?*
h3. {color:#333399}I shall be pleased with your help{color}

Kappy is dead on correct about Bridge Mode as a requirement for the Time Capsule.
Do you know how to check to see if the Time Capsule is configured this way?
Next question.....you really should not try to have two wireless networks....one Arris and another Time Capsule.....unless it is absolutely necessary. Two wireless routers in close proximity can create wireless interference effects that can cause problems with either...or both...networks.
Best to turn off the wireless on one router to keep the chances of wireless interference between routers minimized.
Are both the Arris and Time Capsule providing wireless signals?

Best KVM for using 2 computers with one monitor?

Similar Messages

Maybe you are looking for