Best maintenance routine for OS X ?

hi,
what would the “guru’s” on the forum recommend for the best maintenance routine ?
tia

Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X, and
Myths of required versus not required maintenance for Mac OS X for information.

Similar Messages

What is the best Maintenance Software for Mac?

I am looking for the best maintenance software out there for mac, anything similar to clean my mac..etc, etc,
What do any of you recommend. Price is not an issue.

1. Disk Warrior - fixes many problems Disk Utility can't even find. The most common potentially
serious problem Disk Warrior fixes that Disk Utility won't fix are Directory Structure problems.
2. iDefrag - a disk optimizer.
Why Defragment?
It has often been asserted that defragmentation (or disk optimization) is not a good idea on
systems using Apple’s HFS+ filesystem. The main reasons given for this historically have been:
HFS+ is very much better at keeping files defragmented than many other commodity filesystems.
Advanced features in recent versions of HFS+ can easily be disrupted by a defragmentation tool
that does not support them, resulting in decreased performance.
There is a risk associated with defragmentation.
Whilst these arguments are certainly valid, they are not the whole story. For one thing, iDefrag,
unlike most other disk defragmentation tools, fully supports the most recent features of HFS+,
namely the metadata zone (or “hot band”) and the adaptive hot file clustering support added in
Mac OS X 10.3. Not only does it avoid disrupting them, but it is capable of fixing disruption caused
by other software by moving files into or out of the metadata zone as appropriate.
Sensible arguments for occasional optimization of your disk include:
HFS+ is not very good at keeping free space contiguous, which can, in turn, lead to large files
becoming very fragmented, and can also cause problems for the virtual memory subsystem on Mac
OS X.
Older versions of the Mac OS are not themselves aware of the metadata zone policy, and may
disrupt its performance.
HFS+ uses B-Tree index files to hold information about the filesystem. If a large number of files
are placed on a disk, the filesystem may have to enlarge these B-Tree structures; however, there is
no built-in mechanism to shrink them again once the files are deleted, so the space taken up by
these files has been lost.
Whilst HFS+ is good at keeping individual files defragmented, mechanisms like Software Update
may result in files that are components of the same piece of software being scattered across the
disk, leading to increased start-up times, both for Mac OS X itself and for applications software.
This is a form of fragmentation that is typically overlooked.
Defragmenting disk images can be helpful, particularly if they are to be placed onto a CD/DVD, as
seeks on CD/DVD discs are particularly expensive.
Some specific usage patterns may cause fragmentation despite the features of HFS+ that are
designed to avoid it.
We do not recommend very frequent optimization of your disk; optimizing a disk can take a
substantial amount of time, particularly with larger disks, far outweighing the benefits that are
likely to be obtained by (say) a weekly optimization regime.
Optimization may make more sense, however, following large software updates, or on an
occasional basis if you notice decreased performance and lots of hard disk seeking on system
start-up or when starting an application.
3. Snow Leopard Cache Cleaner.
- Lots of goodies in that one.
4. Clix - literally, hundreds of utility scripts.
Kj

The best maintenance software for tiger

What is the best freeware maintenance app?

Like ~Bee I use YASU also. I also rely on Apple's Disk Utility which is included with your Mac or part of a OS retail disk.
It is always a good idea to have a heavy duty utility around also as it can really save your bacon when a freeware utility or and Apple supplied utility cannot fix an issue. Disk Warrior is my tool of choice, however Tech Tool Pro also gets good reviews from people in the forums.
Remember that the best maintenance tool to have is a good backup!!
There is some additional advice and information about maintenance available here: http://www.thexlab.com/faqs/maintainingmacosx.html

What is the best app for Maintenance/Cleanup for my mac? Do I need Virus Protection?

What is the best app for Maintenance/Cleanup for my Mac? Do I need Virus protection?

How to maintain a Mac
Make two or more backups of all your files
One backup is not enough to be safe. A copy of a backup doesn't count as another backup; all backups must be made directly from the original data.
Keep at least one backup off site at all times in case of disaster. Backing up to a cloud-data service is one way to accomplish this, but don't rely exclusively on such backups.
In fact, don’t rely exclusively on any single backup method, such as Time Machine.
If you get an indication that a backup has failed, don't ignore it.
Keep your software up to date
In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Don't install such modifications unless they're absolutely necessary. Remove them when they are no longer needed. Before installing any Apple update, you must check that all system modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of difficulties with system updates.
Don't install crapware
...such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
It's not much of an exaggeration to say that the whole "utility" software industry for the Mac is a fraud on consumers. The most extreme examples are the "CleanMyMac," "TuneUpMyMac," and “MacKeeper” scams, but there are many others.
As a rule, you should avoid software that changes the way other software works. Plugins for Photoshop and similar programs are an obvious exception to this rule. Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Only install software that is useful to you, not (as you imagine) to the computer. For example, a word processor is useful for writing. A video editor is useful for making movies. A game is useful for fun. But a "cache cleaner" isn't useful for anything. You didn't buy a computer so you could clean caches.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve. Do not rely on "utilities" such as "AppCleaner" and the like that purport to remove software.
Don't install bad, conflicting, or unnecessary fonts
Whenever you install new fonts, use the validation feature of the built-in Font Book application to make sure the fonts aren't defective and don't conflict with each other or with others that you already have. See the built-in help and this support article for instructions.
Deactivate or remove fonts that you don't really need to speed up application launching.
Avoid malware
"Malware" is malicious software that circulates on the Internet. This kind of attack on OS X was once so rare that it was hardly a concern, but it's now increasingly common and dangerous.
There is some built-in protection against malware, but you can’t rely on it—the attackers are always at least one day ahead of the defense. You can’t rely on third-party "anti-virus" products for protection either. What you can rely on is common-sense awareness—not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
Don't fill up your disk or SSD
A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a startup failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
Relax, don’t do it
Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
To use a Mac effectively, you have to free yourself from the Windows mindset that every computer needs regular downtime for maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform.
A well-designed computing device is not something you should have to think about much. It should be an almost transparent medium through which you communicate, work, and play. If you want a machine that needs a lot of attention just to keep going, use a PC, or collect antique cars.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

How to use the table maintenance events for validating the input entries..?

Hi,
I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
Or Is there any other way to solve my problem.
Please share your inputs. Thanks in advance.
Best regards,
paddu.

In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
Here is documentation for Event 01(Before Saving the Data in the Database )
Event 01: Before Saving the Data in the Database
Use
This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
hidden entry processing
fill hidden fields
flag data to be written to hidden tables after the database change.
To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
Realization
This event has no standard routine. The following global data is available for the realization of the user routine:
internal table TOTAL
field symbols
field symbols <ACTION> and <ACTION_TEXT>
<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
Regards,
Joy.

What is the best 'cleaning system' for the Mac?

What do you recommend as the best 'cleaning system' for the Mac!

How to maintain a Mac
Make two or more backups of all your files
One backup is not enough to be safe. A copy of a backup doesn't count as another backup; all backups must be made directly from the original data.
Keep at least one backup off site at all times in case of disaster. Backing up to a cloud-data service is one way to accomplish this, but don't rely exclusively on such backups.
In fact, don’t rely exclusively on any single backup method, such as Time Machine.
If you get an indication that a backup has failed, don't ignore it.
Keep your software up to date
In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Don't install such modifications unless they're absolutely necessary. Remove them when they are no longer needed. Before installing any Apple update, you must check that all system modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of difficulties with system updates.
Don't install crapware
...such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
It's not much of an exaggeration to say that the whole "utility" software industry for the Mac is a fraud on consumers. The most extreme examples are the "CleanMyMac," "TuneUpMyMac," and “MacKeeper” scams, but there are many others.
As a rule, you should avoid software that changes the way other software works. Plugins for Photoshop and similar programs are an obvious exception to this rule. Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Only install software that is useful to you, not (as you imagine) to the computer. For example, a word processor is useful for writing. A video editor is useful for making movies. A game is useful for fun. But a "cache cleaner" isn't useful for anything. You didn't buy a computer so you could clean caches.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve. Do not rely on "utilities" such as "AppCleaner" and the like that purport to remove software.
Don't install bad, conflicting, or unnecessary fonts
Whenever you install new fonts, use the validation feature of the built-in Font Book application to make sure the fonts aren't defective and don't conflict with each other or with others that you already have. See the built-in help and this support article for instructions.
Deactivate or remove fonts that you don't really need to speed up application launching.
Avoid malware
"Malware" is malicious software that circulates on the Internet. This kind of attack on OS X was once so rare that it was hardly a concern, but it's now increasingly common and dangerous.
There is some built-in protection against malware, but you can’t rely on it—the attackers are always at least one day ahead of the defense. You can’t rely on third-party "anti-virus" products for protection either. What you can rely on is common-sense awareness—not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
Don't fill up your disk or SSD
A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a startup failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
Relax, don’t do it
Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
To use a Mac effectively, you have to free yourself from the Windows mindset that every computer needs regular downtime for maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform.
A well-designed computing device is not something you should have to think about much. It should be an almost transparent medium through which you communicate, work, and play. If you want a machine that needs a lot of attention just to keep going, use a PC, or collect antique cars.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Best maintenence program for Mac Pro

I was accustomed to using MacJanitor for my G4. I like it simple. I dont leave my computer on all the time. What is recommended for system maintenance for this computer. I dont want anything that can cause accidental problems if I don't know what I am doing.

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.2 is Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.

Can anyone help with a good system maintenance tool for ML

Does any one have any suggestions for a good dependable all-in-one system maintenance tool for ML and is it straight forward and easy to use?
Thanks in advance .....

You really have no need for one. That said:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.)
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (There is no confirmation that this version also works with Lion or later.)
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner.
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Additional suggestions will be found in
1. Mac Maintenance Quick Assist,
2. Mac OS X speed FAQ,
3. Speeding up Macs,
4. Macintosh OS X Routine Maintenance,
5. Essential Mac Maintenance: Get set up,
6. Essential Mac Maintenance: Rev up your routines,
7. Maintaining OS X,
8. Five Mac maintenance myths,
9. How to Speed up Macs, and
10. Myths of required versus not required maintenance for Mac OS X.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space.

The best backup software for mac os 10.4.8?

Hi,
I'm new on mac, I just got tired of PC and windows so I decided to make a change, a really good change.
First of all to say that I've been looking for an answer of this question around the forums, but havn't got what I'm looking for. What I've found is that people prefere freeware, I just want good stuff.
I'm not sure if this is the right forum to place my topic, but is not a bad one either.
Anyway, here is my question.
I need to clone and do incremental backups, but I have to be extremely sure that the software I use is completly trustfull and secure, so I do not care if I have to pay 100€ (not much more thouh), just want to be sure I get everything works right.
I also prefere software that only does clone and backups than a multitask soft.
Well, if u have any question just ask, u're the ones who really know about this things.
Thanks, everything is wellcome here.

You will find information on backup in this:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.2 is Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at VersionTracker or MacUpdate.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Best care practices for macbook pro

Hi I would like to be more active in preventing issues on my macbook. I use it constantly for school and work, and I rely on it heavily, and so I want to keep it running as best as possible for as long as possible, understanding that while some degradation is inevitable, there is a lot that is preventable. I apologize if there is another thread like this, i did search, but didnt find anything. thanks in advance for any feedback from those much more knowledgeable than myself. I'm runnin:
MacBookPro8,1
Os 10.7.2
2.7 ghz Intel Core i7
4 GB 1333 MHz DDR3
Boot ROM Version: MBP81.0047.B24
SMC Version (system): 1.68f98
I'm basically looking for tips on the best diagnostics software for my system, and the best implementation of the software (run it off an external? etc) and best practices for the keeping the computer running smoothly. Thanks again. -dL

Make redundant backups, keeping at least one off-site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine.
Keep your software up to date. Software Update can be set to notify you automatically of updates to the Mac OS. Some third-party applications have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
Don't install crapware, such as "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cache cleaners,” “defragmenters,” “firewalls,” “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” or "utilities." With very few exceptions, this kind of software is useless, or worse than useless. The more actively promoted the product, the more likely it is to be junk. The only software you should install is that which (a) directly enables you to do the things you use a computer for: creating and editing documents, communicating, playing, and so on; and (b) does not modify the way other software works. Never install third-party software of any kind unless you know how to uninstall it.
The free anti-malware application ClamXav is not crap, and although not needed by everyone, may be useful under some circumstances, such as being on a mixed Mac-Windows enterprise network.
Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until recently, but are now increasingly common, and increasingly dangerous. There is some built-in protection against downloading malware, but you can’t rely on it -- the attackers are always one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness -- not paranoia, which only makes you more vulnerable. Never install software from an untrustworthy or unknown source. If in doubt, do some research. If a web page seems deceptive, it is deceptive. Any page that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a known corporate brand, such as Adobe Flash, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. Any website that tells you that you have a “virus” or that something is wrong with your computer is rogue.
Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users, specifically not “cleaning caches,” “zapping the PRAM,” “rebuilding the directory,” or “repairing permissions.” Such measures are for solving problems as they arise, not for preventive maintenance. The very height of futility is running an expensive third-party utility called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Don’t waste money on Disk Warrior or anything like it.

Free maintenance prog for MacBook Pro OSX Lion

Can anyone advise the good ones?

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.

What's your regular maintenance routine?

When I was on Windows, I had a list of things I did every week: backup, DiskCheck, empty caches, and many more too boring to mention. I kept things running really well, but it was something of a drag. Now, one of the reasons I switched to Apple was to avoid all that, but I can't help but think that there are some things experienced users do every week or so to keep things running well.
So I'm curious: what "maintenance" do you do every so often?

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.2 is Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. arRsync (Freeware)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.

Problem in creating table maintenance generator for 61 fields in table

Hi Experts,
I am facing problem in creating a table maintenance genarator for a ZTABLE which has 61 fields
i am using below details whicle creating the TMG
in Maintenance screen
i am giving maintenance type as two step
Maint screen no overview screen 2
                          single screen        3
Dialog Data Transport details
Recording routine    standard recording routine
but it is giving following error
screen SAPL<ZTABLE NAME>    0003 could not be generated
In DYNPFIELD_ATTR mandatory field LINE has no value
please let me know how to sort out these errors.
Is there any limit on the number of fields for which we can create table maintenance generetor.
Thanks a lot in advance
Sudipto

Hi Sudipto,
There is not limit to the number of fields of the Table which can be used in TMG for generation. But, from the usability point of view this will horrible.
I created a Z table and added 64 fields and was able to generate the TMG with the screens perfectly. So, I guess there should not be any problem.
Well, have a look at the Function Group. I guess the screen numbers are already used by some other screens. You can set the system to propose freely available screen numbers from the pool.
Also, check whether proper authorization is assigned or not.
And if nothing is working, you can degenerate all the generated screens and then can have a new regeneration of it.
Hope these tips will work.
Thanks,
Samantak

ABAP Routine for 0FISCPER slect options in InfoPackage

Hi,
I am trying to write an ABAP Routine for 0FISCPER as select options (range) dynamically.
Ex:
0FISCPER selection for this year as 001.2008 to 012.2008
0FISCPER selection for next year as 001.2009 to 012.2009.
Now we are changing InfoPackage every year manually, so I need to write a routine for 0FISCPER in InfoPackage to handle dynamically every year
Thanks,
SK.

Hi
write an ABAP routine to get that value..But are you getting any planned data(why you want till end of the year...till infopackage runs is o.k i think, if you don't have planned data)...Any way you can check the below code, which can be useful...
You can see the below code at->your infopackage selections>Ty-->choose variable type as 6 and enter any ABAP routine name( to create) and then there is a button on the application tool bar called 'routine info'..this give you the following information...
Definition
You can define complex selections for InfoPackages and control the automatic deletion of requests from InfoCubes in the scheduler, by using routines.
Routines are processing blocks in ABAP programs that consist of a pre-defined data declaration section and an ABAP subroutine (form routine). In the subroutine you can use all of the ABAP programming functions.
You can use the following routines for making selections in InfoPackages:
1. Selection routines for fields, on the Data Selection tab page
2. Selection routines for file names, on the External Data tab page
3. Selection Routines for selecting the from and to dates for time-dependent data, on tab page Update
4. Selection routines for determining old requests to be deleted after successfully loading a new request, on the Data Target tab page
Program frame:
After you have called up the Editor for routine maintenance, you get the following program frame:
1. Selection routines for fields, on tab page Data Selection:
program conversion_routine.
'$*$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line    -
FORM COMPUTE_<Fieldname>
tables l_t_range structure rssdlrange
changing p_subrc like sy-subrc.
$$ begin of routine - insert your code only below this line       -
data: l_idx like sy-tabix.
        read table l_t_range with key
             fieldname = <Fieldname>.
        l_idx = sy-tabix.
        modify l_t_range index l_idx.
        p_subrc = 0.
$$ end of routine - insert your code only before this line       -
ENDFORM.
2. Selection routines for file names, on tabstrip External Data:
FORM compute_flat_file_filename
     changing p_filename like rsldpsel-filename
          p_subrc like sy-subrc.
$$ begin of routine - insert your code only below this line-
          p_filename =
          p_subrc = 0.
$$ end of routine - insert your code only before this line-
ENDFORM.
3. Selection routines for selecting the from and to date for time-dependent data, on tabstrip Update:
form compute_time_dependent_dates
     changing p_datefrom type d
              p_dateto   type d
           p_subrc like sy-subrc.
$$ begin of routine - insert your code only below this line-
          p_datefrom =
          p_dateto   =
          p_subrc = 0.
$$ end of routine - insert your code only before this line-
ENDFORM.
4. Routines for determining the old requests to be deleted after successfully loading a new request, on tab page Data Targets:
form compute_<InfoCube-Name>
tables l_t_request_to_delete structure rsreqdelstruc
using l_request like rsreqdone-rnr
changing p_subrc like sy-subrc.
*Insert Source Code to decide if requests should be deleted.
*All Requests in table l_t_request_to_delete will be deleted
*from Infocube <InfoCube-Name>.
*Add new requests if you want to delete more (from this cube).
*Remove requests you did not want to be deleted.
$$ begin of routine - insert your code only below this line-
     loop at l_t_request_to_delete.
     endloop.
     clear p_subrc.
$$ end of routine - insert your code only before this line-
ENDFORM.
Note:
Those fields flagged with <...> are dependent on the selection fields and are filled automatically by the system when you call up the Editor.
Procedure
Make the following entries:
1. Between $$ begin of global ... and $$ end of global ... you can define data declarations. These are the declaration sections for the local data in the routine. This data is only visible in the routines.
2. The subroutines begin with FORM and end with ENDFORM.
The subroutines for the particular routines are:
Selection routines for fields on tab page Data Selection: FORM COMPUTE_<Field name>
Selection routines for file names on tab page External Data : FORM compute_flat_file_filename
Selection routines for selecting the from and to dates for time-dependent data on tab page Update: FORM compute_time_dependent_dates
Routines for determining old requests to be deleted after successfully loading a new request on tab page Data Target: FORM COMPUTE_<InfoCube-Name>
The subprograms have the following parameters:
Subprogram FORM COMPUTE_<Field name>:
l_t_range
In the table l_t_range the routines for all selection fields that are filled, or have a routine, are made available.
The routines are executed in the scheduler last of all and therefore, you can change all the selections that you have carried out previously.
p_subrc
Using the variable p_subrc you can report errors to the scheduler. p_subrc <> 0 signals an error and means the data request is terminated.
Subprogram FORM compute_flat_file_filename:
p_filename:
You give the name of the file that is to be loaded in parameter p_filename.
This is useful if your file name contains date dependencies that should be determined by sy-datum and calculated during runtime.
p_subrc
You can inform the scheduler of an error with variable p_subrc. p_subrc <> 0 signals an error and means that the data request is terminated.
Subprogram FORM compute_time_dependent_dates:
p_datefrom and p_dateto
Fill these parameters with the from and to dates for time-dependent master data and texts.
p_subrc
You can inform the scheduler about an error using variable >LS>p_subrc. p_subrc <> 0 signals an error and means the data request is terminated.
Subprogram FORM COMPUTE_<InfoCube-Name>:
l_t_request_to_delete
You give the request number of the request that is to be deleted in parameter l_t_request_to_delete. You can also delete requests from the table. These are then not deleted.
p_subrc
You can inform the scheduler about an error with the variable p_subrc. p_subrc signals an error and means the data request is terminated.
3. Insert your program code for the routines between $$ begin of routine ... and $$ end of routine ... so that the respective subprogram variables are supplied with the corresponding values.
4. Check the syntax of your routine with the Check function.
5. You can then transfer the routine with the Save function.
You end routine maintenance when you exit the Editor.
Hope it helps
Thanks,
Teja

Output Control Routine for Order Confirmation

Hi,
I have a problem in sending out order confirmation when the customer have a credit block, no order confirmation is being sent.
Checked on transaction NACE, the routine for Order Confirmation (Routine 2), returns a sy-subrc =4
when the credit block is set. What is the best way to correct this?
Thanks,
Catherine

Create the new routine in VOFM->Requirement->Output Control. Make the required changes in routine source text and assign it to output procedure (NACE).
Thank You,
Ganesh

Best maintenance routine for OS X ?

Similar Messages

Maybe you are looking for