Best method for duplicating a page layout

As you may have seen form my other detailed queries I am struggling to relpicate layouts to new pages.
What is the best method for this?

Unfortunately, these alternatives have proved less that problem free.
For more information see:
http://forums.adobe.com/message/5196194#5196194

Similar Messages

ArchWiki: suggestion for a new page layout

Finally, I have some time to spare for ArchWiki improvement.
I have modified my article on CMYK support in The GIMP as an example.
Please take a look at it here:
http://wiki.archlinux.org/index.php/CMY … n_The_GIMP
The code to produce the box on the right is here:
{{sn|'''Article summary:'''
This article will show how to enable rudimentary CMYK support in The GIMP using the Separate plug-in, and explain how to use color proof filter to soft-proof your images.
It will also cover more general topics on CMYK colors and DTP.
'''Required software:'''
*[http://www.gimp.org/ The GIMP The GIMP]
*[http://www.littlecms.com/ lcms]
*[http://download.adobe.com/pub/adobe/iccprofiles/win/AdobeICCProfiles_end-user.zip Adobe ICC profiles]
*[http://www.blackfiveservices.co.uk/separate.shtml Separate plugin source]
'''Related article:'''
*[[Using lprof to profile monitors]]
This is the best we can do with current ArchWiki setup. It would be even better if we could list categories in the box, as well as i18n links.

A: ArchWiki: suggestion for a new page layout

dtw wrote:Doesn't display correctly in IE
I've been tinkering with the templates. It's fixed now, I think.
Anyway, the templates used for the job can be seen from the code:
{{Article summary start}}
{{Article summary text|This article will show how to enable rudimentary CMYK support in The GIMP using the Separate plug-in, and explain how to use color proof filter to soft-proof your images. It will also cover more general topics on CMYK colors and DTP.}}
{{Article summary heading|Translations}}
{{i18n_entry|Deutsch|CMYK support in The GIMP(Deutsch)}}
{{i18n_entry|English|CMYK support in The GIMP}}
{{i18n_entry|Español|CMYK support in The GIMP(Español)}}
{{i18n_entry|Finnish|CMYK support in The GIMP(Suomi)}}
{{i18n_entry|Français|CMYK support in The GIMP(Français)}}
{{i18n_entry|Nederlands|CMYK support in The GIMP(Nederlands)}}
{{Article summary heading|Required software}}
{{Article summary link|The GIMP (v2.0 and above)|http://www.gimp.org/}}
{{Article summary link|lcms (v1.15 ?)|http://www.littlecms.com/}}
{{Article summary link|Separate plugin (v0.10 and above ?)|http://www.blackfiveservices.co.uk/separate.shtml}}
{{Article summary heading|Related articles}}
{{Article summary wiki|Using lprof to profile monitors}}
{{Article summary end}}
As you can see, it's a bit more typing than before, but it sure looks better. I might shorten the names for the templates. I wanted to make them memorable so they are a bit long.
As you can see, the problem of i18n links integration was fixed, so you can use existing i18n template and combine with the new "Article summary" set.
I will modify the article about writing summaries to include those templates and examples.
EDIT: :oops: the i18n links in the article are just examples. Don't use them, since they lead to non-existing pages.
EDIT2: Okay, I've played around with the appearance of the summary box, but I'm at work now, so it's going nowhere. I'll play with it some more when I get home.

JDeveloper, external tools, same parameters for 2 VO, page layout..

Hi,
JDeveloper Studio Edition Version 11.1.2.3.0. I have a few questions:
1.) External tools can be added to JDeveloper. But how can I add the libraries or components of that tool to the IDE?
2.) In our application there are 2 VO based on a union select that have the same parameters. These VOs are linked.
However, the results must be shown in 2 separate adf tables. I tried to execute, but received, missing IN- OUT-Parameters...
All parameters are set to required and partial triggers are also configured.
3.) I set the document size to a fixed size in pixel. However, the components on the page should not stretch. Which technique
is best for this? Embedding html in adf, i.e. an html table for the base page layout and insert adf inside?
4.) I must also create, i.e. a custom accordion panel (color and icon), menus and submenus. Not skinning. Is this possible in JDev.?
Thanks for your help/feedback!

1) external tools should be self containing. This means they should be applications which can run on their own, like Notepad. What you want to to is to add a library.
2) we need more info. A VO can be based on a union but it doesn't have a connection to an other VO which might be based on the same union. So for me there is some information missing
3) Web applications don't (shouldn't) use fix size. Instead of setting the size on the document you should use a layout container like panelGroupLayout which doesn't stretch its children.
4) Sure, but why?
Timo

Best method for networking with ubuntu linux

Hi,
I'm setting up an ubuntu linux fileserver, and I was wondering what the best method for filesharing with my mac is. I'm currently running osx 10.4.11, though I may be upgrading to 10.5 soon. I'll be running SMB networking for a couple of other computers, but I'd prefer something a bit more robust that can handle file permissions etc.

Mac OS X supports NSF out of the box. Configuration isn't documented.
I recall Apple got rid of net info manager in Leopard, so the configuration will be different. Perhaps more unix like.
Mac OS X support the Unix Network File System (NFS). However, it leaves out
the GUI.
This page show you how to use NetInfo Manager:
http://mactechnotes.blogspot.com/2005/09/mac-os-x-as-nfs-server.html#c1168221713 40271068
NFS Manager can both setup NFS shares and connect to NFS shares.
http://www.bresink.com/osx/NFSManager.html
Once you figure out how NFS Manager configures the NFS shares, you can
use Applications > Utilities > NetInfo Manager to create more shares.
You will either have to coordinate Unix Userid number and Unix Group Id number or use the mapall option on the share.
To find out your Mac OS X userid and group id do:
applications > utilities > terminal
ls -ln
ls -l
# lists the NFS share on your mac
showmount -e localhost
#list NFS shares on a remote host
showmount -e remote-ip-address
Once you see what NFS Manager does, you will be able to use NetInfo Manager to manage a connection. In Mac OS 10.4 you can configure the /etc/exports control file. See man exports for the details. Before that you had to have the data in NetInfo manager. When Mac OS X came out, many common Unix control files were not present. Instead the data had to be in NetInfo manager. Over time Apple has added more and more standard Unix control files.
======
You do know about the need to match userids & groupids.
# display uid and gid
ls -ln
sudo find / -user short-user-name -exec ls '-l' {} \;
# on Mac OS X
you will need to go into NetInfo Manager and select user and find your short-user-name. Change uid and guid.
#on Linux look in
/etc/passwd
/etc/group
# with care...
# change 1000:20 to your values for uid:gid
sudo find / -user short-user-name -exec chown 1000:20 {} \;
The manual for Tenon MachTen UNIX (which Apple checked when doing Mac OS
X) says that one should crate the file /etc/exports, which will cause
portmap, mountd and nsfd to launch at startup via the /etc/rc file. The
file must not contain any blank lines or comments, and each line has the
syntax
directory -option[, option] hostlist
where 'directory is the pathname of the directory that can be exported,
and 'hostlist' is a space separated list of hostnames that can access the
directory. For example
/usr -ro foo bar
/etc
/Applications
/User/gladys gladys
The client the uses a command like
/sbin/mount -t type [-rw] -o [options] server:directory mount_point
where 'type' is 'nfs', 'server' the name of the server, 'directory' the
server directory mounted, and 'mount_point' the client mount point. See
'man mount' for details.
I haven't tried the above, but it would be nice to know if it works on Mac OS X.
Hans Aberg
This will give you some hints on NFS. Post back your questions.
Robert

Best method for videos

I need some advice. What would be the best method for putting a video on a page? How would I go about this method?
Also, the person who wants me to put in this video likely has it only in dvd format (A professor who records his lectures). Any suggestions as to a program that converts dvds to something simpler like a .mov or .mv4? Preferably a format compatible with the method I'm searching for.
Thanks in advance!

Hello Danielle,
there are so many possibilities (here too Google and the search function here in this forum could be your friends too ). That might be the reason that you didn't get an answer till now.
My "library" shows for example these interesting informations:
http://www.pickleplayer.com/index.html
http://videojs.com/
http://camendesign.com/code/video_for_everybody#video-what
http://www.mediacollege.com/video/format/quicktime/streaming/
http://www.mediacollege.com/video/streaming/embed/
and:
http://www.pickleplayer.com/index.html
http://videojs.com/
Good luck and a little bit of a "staying power"
Hans-Günter

Best method for plotting data array?

I am reading data from a Delta Motion controller and writing that data to an array in my vb.NET program. The data is not time stamped but I know what the sampling interval is (0.001s). I want to take that data and plot it on my Waveform Graph. What is the best method for doing this? I'm sure this is simple, but I'm new to MS and LV.
Private Sub btnRampUpA_Click(sender As Object, e As EventArgs) Handles btnRampUpA.Click
Dim Axis0ActualPrsData() As Single = New Single(4096) {} 'Create array for data from the RMC controller to be read into
Dim Axis0Actual() As AnalogWaveform(Of Single)
If RMC.IsConnected(PingType.Ping) = True Then 'Check to make sure comms to RMC is good before trying to read data from it
Try
RMC.ReadFFile(FileNumber150.fn150Plot0StaticUA0, 112, Axis0ActualPrsData, 0, 4095) 'read the plot data where sample period = 0.001
Catch ex As ReadWriteFailedException
MessageBox.Show("Unable to read plot data from the RMC. " & ex.Message)
End Try
End If
End Sub
Thank you

PlotYAppend appears to be the answer according to the white page, although I don't have it working as of yet. Can someone confirm?

What is the best method for backing up photos in IPhoto?

I have over 10,000 photos in IPhoto and am looking for the best method for doing a backup (or an archive?). I'm now using ICloud and it appears it's just photo streaming and does not have storage capability. External hard drive, copying to a DVD, other suggestions?

Most Simple Back Up
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex:
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
My Routine
My Library lives on my iMac. It’s Backed up to two external hard disks every day. These disks are permanently attached to the iMac. These back ups run automatically. One is done by Time Machine, one is a bootable back up done by SuperDuper
It’s also backed up to a portable hard disk when ever new photos are added. This hard disk lives in my car. For security, this disk is password protected.
I have a second off-site back up at a relative’s house across town. That’s updated every 3 or 4 months.
My Photos are backed up online. There are many options: Flickr, Picasa, SmugMug etc. However, check the terms of your account carefully. While most sites have free uploading, you will often find that these uploads are limited in terms of the file size or the bandwidth you can use per month. For access that allows you to upload full size pics with no restrictions you may need to pay.
Every couple of months I test the back ups to make sure they are working correctly. It’s very easy to mis-configure a back up application, and the only way to protect against that is to do a trial restore.

When bouncing- what's best method for smallest file size/highest quality?

I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality? And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's. I basically need them to be about 3 mb each. Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
If anyone can help I would really appreciate it. Please be detailed in your response, because I am new to logic and I really need the step by step.
Thank you...

MUYconfundido wrote:
I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality?
The highest bitrate that falls within your limits. You'll have to calculate how big your MP3's can be, then choose the bitrate that keeps the size within your limit. The formula is simple: bitrate is the number of kilobits per second, so a 46 second stereo file at 96 kbps would be 96 x 46 = 4416 kbits / 8* = 552 kBytes or 0.552 MB. (*8 bits = 1 Byte)
So if you know the length of your tracks you can calculate what bitrate you need to keep it within 10 MB total.
I consider 128 kbps the lowest bearable bitrate for popsongs and other modern drumkit based music. Deterioration of sound quality is often directly related to the quality of the initial mix and the type of instruments used in it. Piano(-like) tones tend to sound watery pretty quickly at lower bitrates, as do crash and ride cymbals. But don't take my word for it, try it out.
And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
You can only ZIP the whole thing after that, but that is just for transport. You'll have to unzip it again to use it. And no, you cannot compress an MP3 any further and still play it.
I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's.
That is silly, you could have done that in Logic, which has one of the best MP3 encoders built in. And how good encoders are will especially come out at bitrates around or below 128, which you might be looking at.
I basically need them to be about 3 mb each.
So, one more scrap of info we need here: how long are those three pieces, exactly? I'll calculate the bitrate for you - but please bounce 'm directly out of Logic as MP3's. They will very probably sound better than your WAV-conversions made with Switch.
!http://farm5.static.flickr.com/4084/4996323899_071398b89a.jpg!
Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
Length of the piece? And does the .Wav bounce you have sound OK?

In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?

Adobe Acrobat 9 Pro V9.4.0
Win7 Pro x64
Problem: In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?
Every time Acrobat scans a document, I have to go to Initial View to set Navigation tab, Page layout, and Magnification. It does not remember the settings I last used.
Thanks in advance.

See my response to this post

Question: Best method for mounting drives at log-in time?

I would like to know what others consider the best method for mounting drives at log-in time is? I can see a few methods such as start-up items on the client, start-up items on the server to managed users and possibly a start-up script. One wrinkle in the scenario is that users can log-in directly to the server so the method should allow that to happen gracefully. Thanks in advance for your help.

Hi Bigsky,
You are asking some really fundamental questions that require quite a lot of explanation. Luckily Apple has some great documentation on their server software.
You will be able to find your answers here by diggin in a bit:
http://www.apple.com/server/documentation/
Good Luck!
Dual 2.0Ghz G5 Mac OS X (10.4.3)

Best method for flv playback in flash 8

group,
i am currently trying to get to grips with flv playback with
flash 8. i have come across a number of methods for flv playback
within flash 8 and am curious to know the difference between
methods and ultimately if there is such a difference discover which
is best. I have had a few issues with some methods and was
wondering if it was because that method sucks.
In particular i am looking for the best method for allowing
custom skinning of the player with the ability to have a player
somewhere on stage without it being stapled to the darn flv file.
METHOD1:
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
theVideo.attachVideo(ns);
ns.play("testmovie.flv");
METHOD2:
import mx.video.*;
this.attachMovie("FLVPlayback", "my_FLVPlybk", 10,
{_width:360,_height:240,x:0, y:0});
my_FLVPlybk.skin = "SteelExternalAll.swf"
my_FLVPlybk.contentPath = "testmovie.flv";
my_FLVPlybk.autoSize=true;
my_FLVPlybk.autoPlay=false;
what are the differences??
any help would be much appreciated. Thanks for your time and
expertises,
Flash fan.

Adobe has announced that it has ceased development of Flash for mobile phones (in favour of HTML5, and due to the opposition of both Apple and Microsoft to allow support of Flash for their mobile operating systems), so from that direction neither Microsoft nor Nokia is going to get any help.
If the Adobe Flash Video format specification is publicly available to use or to license (I don't know if it is), then at least Microsoft could implement support for it, if they wanted to (Nokia might not have sufficient rights from Microsoft to add new codecs to Windows Phone).
So, you might direct your question primarily to Microsoft, rather than Nokia (of course, a Microsoft representative will probably read this, too, but whether they'll response or not is another matter).

Best method for incremental replication to backup xserve?

I was just trying to figure out what would be the best method for routinely incrementally replicating a primary xserve. I have a secondary that has the same hardware. I thought about using scheduled tasks with Carbon Copy Cloner over say a Crossover cable to the secondary xserve. However, doing this backup would continually wipe out the network settings for the secondary mac? I could do the replication to a secondary drive and then just make that drive the boot drive in the event of data corruption on the master server?
Where I'm at now is that the primary server runs Raid1, so in the event of a single drive failure or a hardware failure, I could swap the drives into the backup server. However, I'd like some sort of protection against data corruption on the primary xserve.
Any general thoughts on a better way to do this? Or is there software that does this well?
Thanks

Our primary is an XServe RAID. In addition it has an external 2TB drive that I CCC all the user accounts to every night. I then setup a Mac Mini Server as a replica.
If the primary XServe has a catastrophic failure, I simply connect the 2TB drive to the Mac Mini and point the replicated user accounts to the cloned data on the 2TB drive.
I haven't tested it. But this scenario seemed like the best solution.
Message was edited by: MacTech_09

Best method for refreshing a component's data?

What's better when you want to refresh the content of an object? Should you just replace your JComponent with an entirely new one, or should you try to get access to the data and then remove the items and then re-add them.
In my example, I have a JTree and am not sure which would be the best method to use. Should I try to remove all the nodes, or sometimes I think it would be easier to just remove the tree component from my panel, create a new tree and re-populate it?
Thanks for any advice.

pjbarbour wrote:
I'm not quite sure what would be the best method for this. My client is using a 4x3 screen and SD projector at a large meeting, and they want me to just create a DVD that is letterboxed. I have one Premiere CS5 project that's 1920x1080, and another project that's 720x480 widescreen (1.2). I created a new sequence in both projects that is 720x480, 4x3 (0.9), and what I do is just scale the timeline down so that it's letterboxed. Is this the best method for achieving this? Or would you do something else? I don't like the idea of scaling my timeline down in Premiere.
Hello.
As Jim so rightly points out above, you do not need to do anything.
Just use your normal 16:9 widescreen footage, and author as normal.
Your player will letterbox automatically when it is connected to a 4:3 screen in setup (just make sure "Pan & Scan" is not also there)

Best method for keyframing with 3d camera 1 shot....

Hi I have a project I am working on and basically I am finding the key framing a little frustrating because I cant get the camera to do what I want. Ususally I have no problem in FCP but with Motion it doesnt seem as easy. Bascially what I have done is put up 7 of the same clip all in 3d spread down. What I want the camera to do is zoom close to one. Pause while you read what is on the clip then pan and zoom to the next one. The method I am doing is I hit the record button. Start the zoom to the first object then move timeline to where I want the camera to stop the zoom. I hit the record button again..wait a few frames and then hit it again so I can zoom to the next object. What seems to hahppen is the camera just starts moving to the other object and wont pause for those frames. I would like to know the best method for making this possible.Thanks

hi,
edit them all! Just select them all and choose linear from the control pop up.
if that doesnt work, maybe you could try setting keyframes manually, like you would in FCP. You dont turn on the red button at all, but add keframes for the parameters you want to animate in the Inspector window.
Sometimes I find I have to add two keyframes a frame apart to give that definite stop. This also allows me to play with the timing of the pauses. So set a keyframe where the camera starts to move and one where it stops. Then a frame on set another keyframe without changing the values, then go to the next point you want the camera to move and set another keyframe.... and so on.
hth
adam

Best method for dynamically populating PDF on the web?

Hi there,
I'm trying to find a web-based solution to populate text within an existing PDF with a person's name (using a name variable within the PDF body copy in several spots). I know that LiveCycle Designer is the best method for creating dynamic PDF's but since I'm on a Mac, LiveCycle Designer wasn't packaged with my CS5 Suite / Acrobat 9 and I'm not eager to run windows in parallel and pay for acrobat pro a second time just to have it on windows for the LiveCycle functionality...CS5 wasn't cheap ha.
So I'm trying to find out if there are alternative ways to achieve this without going down that road. I don't mind writing PHP or using some other programming language to set it up online, but I just seem to be finding many different methods coming up and cannot find the most straightforward solution.
Any help is greatly appreciated!

LiveCycle Designer won't do what you want. It requires server software: LiveCycle Forms will do the trick.
You can find information on it here: http://www.adobe.com/products/livecycle/forms/

Best method for duplicating a page layout

Similar Messages

Maybe you are looking for