Best method for keying

What is the easiest method for keying greenscreen clips in Final Cut?

That depends I think... If you have Motion 2, the keyer in it is better than FCP's...
There are two keyers in FCP, and each works OK as long as the source footage isn't DV, and it was lit properly without any spill on the subject.
Jerry

Similar Messages

  • Best method for keyframing with 3d camera 1 shot....

    Hi I have a project I am working on and basically I am finding the key framing a little frustrating because I cant get the camera to do what I want. Ususally I have no problem in FCP but with Motion it doesnt seem as easy. Bascially what I have done is put up 7 of the same clip all in 3d spread down. What I want the camera to do is zoom close to one. Pause while you read what is on the clip then pan and zoom to the next one. The method I am doing is I hit the record button. Start the zoom to the first object then move timeline to where I want the camera to stop the zoom. I hit the record button again..wait a few frames and then hit it again so I can zoom to the next object. What seems to hahppen is the camera just starts moving to the other object and wont pause for those frames. I would like to know the best method for making this possible.Thanks

    hi,
    edit them all! Just select them all and choose linear from the control pop up.
    if that doesnt work, maybe you could try setting keyframes manually, like you would in FCP. You dont turn on the red button at all, but add keframes for the parameters you want to animate in the Inspector window.
    Sometimes I find I have to add two keyframes a frame apart to give that definite stop. This also allows me to play with the timing of the pauses. So set a keyframe where the camera starts to move and one where it stops. Then a frame on set another keyframe without changing the values, then go to the next point you want the camera to move and set another keyframe.... and so on.
    hth
    adam

  • What is best method for transferring iTunes library from PC to iMac?

    I have a new iMac.  I have authorized it with my iTunes account.  My current iTunes library is on a Windows Vista PC, not on the same network.  What is the best method for me to use to transfer the iTunes library from the PC to the iMac?

    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
    Macworld - How to transfer iTunes libraries between PC and Mac - http://www.macworld.com/article/46248/2005/08/shiftitunes.html
    Move an iTunes library from a Windows PC to a Mac - http://www.macworld.com/article/1146958/move_itunes_windows_mac.html

  • What is the best method for transferring iTunes library from PC to iMac?

    I have a new iMac.  I have authorized it with my iTunes account.  My current iTunes library is on a Windows Vista PC, not on the same network.  What is the best method for me to use to transfer the iTunes library from the PC to the iMac?
    iMac, Mac OS X (10.7.4)

    Did I just answer this in another post for you?
    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
    Macworld - How to transfer iTunes libraries between PC and Mac - http://www.macworld.com/article/46248/2005/08/shiftitunes.html
    Move an iTunes library from a Windows PC to a Mac - http://www.macworld.com/article/1146958/move_itunes_windows_mac.html
    iTunes for Windows: Moving your iTunes Media folder - http://support.apple.com/kb/HT1364

  • HT1229 what is the best method for using a iphoto with an external hard drive for greater capacity?

    what is the best method for using a iphoto with an external hard drive for greater capacity?

    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • What is the best method for backing up photos in IPhoto?

    I have over 10,000 photos in IPhoto and am looking for the best method for doing a backup (or an archive?).  I'm now using ICloud and it appears it's just photo streaming and does not have storage capability. External hard drive, copying to a DVD, other suggestions?

    Most Simple Back Up
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex:
    Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
    My Routine
    My Library lives on my iMac. It’s Backed up to  two external hard disks every day. These disks are permanently attached to the iMac. These back ups run automatically. One is done by Time Machine, one is a bootable back up done by SuperDuper
    It’s also backed up to a portable hard disk when ever new photos are added. This hard disk lives in my car. For security, this disk is password protected.
    I have a second off-site back up at a relative’s house across town. That’s updated every 3 or 4 months.
    My Photos are backed up online. There are many options: Flickr, Picasa, SmugMug etc. However, check the terms of your account carefully. While most sites have free uploading, you will often find that these uploads are limited in terms of the file size or the bandwidth you can use per month. For access that allows you to upload full size pics with no restrictions you may need to pay.
    Every couple of months I test the back ups to make sure they are working correctly. It’s very easy to mis-configure a back up application, and the only way to protect against that is to do a trial restore.

  • When bouncing- what's best method for smallest file size/highest quality?

    I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
    So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality? And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
    I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's. I basically need them to be about 3 mb each. Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
    If anyone can help I would really appreciate it. Please be detailed in your response, because I am new to logic and I really need the step by step.
    Thank you...

    MUYconfundido wrote:
    I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
    So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality?
    The highest bitrate that falls within your limits. You'll have to calculate how big your MP3's can be, then choose the bitrate that keeps the size within your limit. The formula is simple: bitrate is the number of kilobits per second, so a 46 second stereo file at 96 kbps would be 96 x 46 = 4416 kbits / 8* = 552 kBytes or 0.552 MB. (*8 bits = 1 Byte)
    So if you know the length of your tracks you can calculate what bitrate you need to keep it within 10 MB total.
    I consider 128 kbps the lowest bearable bitrate for popsongs and other modern drumkit based music. Deterioration of sound quality is often directly related to the quality of the initial mix and the type of instruments used in it. Piano(-like) tones tend to sound watery pretty quickly at lower bitrates, as do crash and ride cymbals. But don't take my word for it, try it out.
    And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
    You can only ZIP the whole thing after that, but that is just for transport. You'll have to unzip it again to use it. And no, you cannot compress an MP3 any further and still play it.
    I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's.
    That is silly, you could have done that in Logic, which has one of the best MP3 encoders built in. And how good encoders are will especially come out at bitrates around or below 128, which you might be looking at.
    I basically need them to be about 3 mb each.
    So, one more scrap of info we need here: how long are those three pieces, exactly? I'll calculate the bitrate for you - but please bounce 'm directly out of Logic as MP3's. They will very probably sound better than your WAV-conversions made with Switch.
    !http://farm5.static.flickr.com/4084/4996323899_071398b89a.jpg!
    Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
    Length of the piece? And does the .Wav bounce you have sound OK?

  • Question: Best method for mounting drives at log-in time?

    I would like to know what others consider the best method for mounting drives at log-in time is? I can see a few methods such as start-up items on the client, start-up items on the server to managed users and possibly a start-up script. One wrinkle in the scenario is that users can log-in directly to the server so the method should allow that to happen gracefully. Thanks in advance for your help.

    Hi Bigsky,
    You are asking some really fundamental questions that require quite a lot of explanation. Luckily Apple has some great documentation on their server software.
    You will be able to find your answers here by diggin in a bit:
    http://www.apple.com/server/documentation/
    Good Luck!
    Dual 2.0Ghz G5   Mac OS X (10.4.3)  

  • Best method for flv playback in flash 8

    group,
    i am currently trying to get to grips with flv playback with
    flash 8. i have come across a number of methods for flv playback
    within flash 8 and am curious to know the difference between
    methods and ultimately if there is such a difference discover which
    is best. I have had a few issues with some methods and was
    wondering if it was because that method sucks.
    In particular i am looking for the best method for allowing
    custom skinning of the player with the ability to have a player
    somewhere on stage without it being stapled to the darn flv file.
    METHOD1:
    var nc:NetConnection = new NetConnection();
    nc.connect(null);
    var ns:NetStream = new NetStream(nc);
    theVideo.attachVideo(ns);
    ns.play("testmovie.flv");
    METHOD2:
    import mx.video.*;
    this.attachMovie("FLVPlayback", "my_FLVPlybk", 10,
    {_width:360,_height:240,x:0, y:0});
    my_FLVPlybk.skin = "SteelExternalAll.swf"
    my_FLVPlybk.contentPath = "testmovie.flv";
    my_FLVPlybk.autoSize=true;
    my_FLVPlybk.autoPlay=false;
    what are the differences??
    any help would be much appreciated. Thanks for your time and
    expertises,
    Flash fan.

    Adobe has announced that it has ceased development of Flash for mobile phones (in favour of HTML5, and due to the opposition of both Apple and Microsoft to allow support of Flash for their mobile operating systems), so from that direction neither Microsoft nor Nokia is going to get any help.
    If the Adobe Flash Video format specification is publicly available to use or to license (I don't know if it is), then at least Microsoft could implement support for it, if they wanted to (Nokia might not have sufficient rights from Microsoft to add new codecs to Windows Phone).
    So, you might direct your question primarily to Microsoft, rather than Nokia (of course, a Microsoft representative will probably read this, too, but whether they'll response or not is another matter).

  • Best method for incremental replication to backup xserve?

    I was just trying to figure out what would be the best method for routinely incrementally replicating a primary xserve. I have a secondary that has the same hardware. I thought about using scheduled tasks with Carbon Copy Cloner over say a Crossover cable to the secondary xserve. However, doing this backup would continually wipe out the network settings for the secondary mac? I could do the replication to a secondary drive and then just make that drive the boot drive in the event of data corruption on the master server?
    Where I'm at now is that the primary server runs Raid1, so in the event of a single drive failure or a hardware failure, I could swap the drives into the backup server. However, I'd like some sort of protection against data corruption on the primary xserve.
    Any general thoughts on a better way to do this? Or is there software that does this well?
    Thanks

    Our primary is an XServe RAID. In addition it has an external 2TB drive that I CCC all the user accounts to every night. I then setup a Mac Mini Server as a replica.
    If the primary XServe has a catastrophic failure, I simply connect the 2TB drive to the Mac Mini and point the replicated user accounts to the cloned data on the 2TB drive.
    I haven't tested it. But this scenario seemed like the best solution.
    Message was edited by: MacTech_09

  • Best method for refreshing a component's data?

    What's better when you want to refresh the content of an object? Should you just replace your JComponent with an entirely new one, or should you try to get access to the data and then remove the items and then re-add them.
    In my example, I have a JTree and am not sure which would be the best method to use. Should I try to remove all the nodes, or sometimes I think it would be easier to just remove the tree component from my panel, create a new tree and re-populate it?
    Thanks for any advice.

    pjbarbour wrote:
    I'm not quite sure what would be the best method for this.  My client is using a 4x3 screen and SD projector at a large meeting, and they want me to just create a DVD that is letterboxed.  I have one Premiere CS5 project that's 1920x1080, and another project that's 720x480 widescreen (1.2).  I created a new sequence in both projects that is 720x480, 4x3 (0.9), and what I do is just scale the timeline down so that it's letterboxed.  Is this the best method for achieving this?  Or would you do something else?  I don't like the idea of scaling my timeline down in Premiere.
    Hello.
    As Jim so rightly points out above, you do not need to do anything.
    Just use your normal 16:9 widescreen footage, and author as normal.
    Your player will letterbox automatically when it is connected to a 4:3 screen in setup (just make sure "Pan & Scan" is not also there)

  • Best method for dynamically populating PDF on the web?

    Hi there,
    I'm trying to find a web-based solution to populate text within an existing PDF with a person's name (using a name variable within the PDF body copy in several spots).  I know that LiveCycle Designer is the best method for creating dynamic PDF's but since I'm on a Mac, LiveCycle Designer wasn't packaged with my CS5 Suite / Acrobat 9 and I'm not eager to run windows in parallel and pay for acrobat pro a second time just to have it on windows for the LiveCycle functionality...CS5 wasn't cheap ha. 
    So I'm trying to find out if there are alternative ways to achieve this without going down that road.  I don't mind writing PHP or using some other programming language to set it up online, but I just seem to be finding many different methods coming up and cannot find the most straightforward solution.
    Any help is greatly appreciated!

    LiveCycle Designer won't do what you want. It requires server software: LiveCycle Forms will do the trick.
    You can find information on it here: http://www.adobe.com/products/livecycle/forms/

  • Best Method for transferring projects back and fourth

    Hello. I will soon be purchasing an iMac for home use and would like to get some advice on project transfer. I will be doing a lot of video editing back and fourth between the office and home. What is the best method for doing this? Where can i locate the files to make sure that I have everything and wont be missing anything when I bring it home, etc. Thanks for any advice!
    Brandon

    Use a (Firewire 800 or faster) external HD to keep your media, events and projects on.
    You can then take the drive to work with you and back home. Use FCP X to transfer (or create) the event and projects on this drive and both macs will recognise it.
    The drive must be formatted Mac OS Extended (journaled is not important for video drives).
    Andy

  • Best method for duplicating a page layout

    As you may have seen form my other detailed queries I am struggling to relpicate layouts to new pages.
    What is the best method for this?

    Unfortunately, these alternatives have proved less that problem free.
    For more information see:
    http://forums.adobe.com/message/5196194#5196194

  • Best method for UIComponent Initialization?

    I have a custom class that extends Panel and I would like to
    get input on the best method for initializing custom properties
    upon object creation. I currently create an event handler for the
    FlexEvent.CREATION_COMPLETE event and assign my properties then.
    However, I'd like to slim my code down. Is there a place I
    can initialize properties without having to import events? I tried
    overriding some protected methods such as commitProperties, but
    discovered this method gets called again by Flex when effects are
    done playing on the UIComponent. I don't want to initialize my
    custom parameters again because this is essentially reseting any
    interaction the user did with it.
    Is there another super method I can use to initialize my
    method rather than use CREATION_COMPLETE events?
    Thanks.

    The simplest and cheapest option is LifeFlix.  They have more info at www.lifeflix.com or on the Mac app store at https://itunes.apple.com/us/app/lifeflix/id630212114?ls=1&mt=12

Maybe you are looking for