Best Method to move CATSDB from 4.6 C to ECC 6.0

Hi....
Please share your experience or Knowledge base or Best Practice in the area of CATSDB Migration from 4.6C to ECC 6.0
Thanks & regards,
Rao

Edited by: Rao on Mar 31, 2009 12:47 PM

Similar Messages

Best method to move data from ArcSDE to Oracle Spatial/Mapviewer environment?

If ArcGIS Geodatabase is the standard data store for GIS data, but business IT wants to make use of an Oracle Spatial/Mapviewer environment, what is the best practices recommended approach for interfacing between the two data stores. (perhaps this is an Oracle Spatial question, but tools exist here as well.)

Yes, This question is more suited for the Oracle Spatial Forum.
And about the question, you must use Esri's owns products like ArcCatalog or Arcmap to connect to oracle and change the format of your geometries. Arcgis is capable of storing geometrical data in oracle in SDO_Geometry format.
If you have question about the procedure of this action, don't hesitate to ask.
Regards,
Farid

Preferred Method to Move iTunes from PC to Mac

I have read for a few hours and seen several threads about this particular topic, but have also seen several different suggestions. I realize that the best method to move songs from a PC to a new MAC will vary based on other factors (use of an external hard drive, iTunes/music backed-up to CDs, etc.), so I feel that I should present my situation and see what the experts recommend. Here's my current set-up:
1) I have a windows-based PC with 3 user accounts and 3 different iPods with 3 different libraries.
2) I keep the iTunes folder on one drive (C) and all of the music on a second hard drive (L).
3) I intend to buy a new Macbook Pro and want to migrate 1 or more of these PC-based iTunes libraries and corresponding music files to the new Mac.
4) I have iTunes 7 and have recently backed-up each of my iTunes libraries onto CDs (just being a little cautious).
5) I also have a USB external drive with all of my iTunes info and songs.
6) I have two 20gb 4G iPods models and one very new 8gb Nano. I intend to upgrade my two 4G iPods to new classics or new Nanos soon, too.
7) I don't have migrate all 3 libraries to the new Mac, but would likely want to move two.
From what I have read, I could use the CD back-up's, the iPod itself (after consolidating libraries), the external hard-drive, or a 3rd party software.
My confusion stems from the fact that I have multiple PC-based accounts, iTunes libraries and keep my iTunes folder in one drive and my music in another. So, I am hoping that some guru's here can take my scenario and suggest the most efficient, user-friendly approach for me to migrate my iTunes libraries and songs from the PC to the new Mac.
I'd also want to know if there's anything special I should do given that I want to get two new iPods, too. Thanks!

bump (seeking input, please)

What is the Best Method to move the Applcations to a New Server Setup

Hi All...
Happy Christmas...
Advanced Happy New YEAR 2009...
We are using oracle Apex 3.1 on Database base oracle 10g Rel2 across Server 2000 platform,
Made a New Installationof Oracle Apex 3.1 on HP-Unix PA-RISC and database is oracle 10g Rel2(New Server),
Sucessfully...
my Question is
what is the Best Method to move the Applcations to a New Server ?
1) Using Export/Import option .can I move the Applications/ Reports to New Server?
2) Is it possible By Taking Application level Export and Import to the new Server?
3)Do I need to create the Workspace as similar to old Server then Move the ApplicationS?
or taking the Application EXPORT/IMPORT also imports the Workspace?
(OR)
Do I need to import the Database tables taking table level Dumps as well?
THANKS ALOT in Advance
MKZ
Edited by: Z on Dec 31, 2008 12:10 PM
Edited by: Z on Dec 31, 2008 12:57 PM

Hello:
You pretty much have it right. Here's what I do to move applications between APEX installations.
1) Export/Import Workspaces
2) Export/Import Applications for each workspace. (I retain the source application id in the target)
3) Export/Import Workspace Images/Files etc
4) Use Oracle exp/imp , Oracle DataPump or plain old sqlplus scripts to move database objects from source to target.
Varad

Best LKM to move data from with in Oracle from one schema to another Schema

Hi Gurus,
What is the best KM to move data from one schema to another schema within same oracle database.
Thanks in advance

Dear,
If your source and target are on the same database server then you dont need LKM.
You have to 1. create one data server for the database server
2. Create one physical schema for your source and another physical schema for your target under the above created data server.
3. Then create models for each above created physical schema
In this case you just need IKM knowledge module
Please refer http://oditrainings.blogspot.in/2012/08/odi-interface-source-target-on-same.html
If your source and target are on different server then you must create two different data servers in topology. You have to use LKM.
The best LKM to use is LKM oracle to Oracle dblink. But you should have proper grants to use it
If your source has very few records you can go with LKM SQL to Oracle other wise use LKM oracle to Oracle dblink

Seeking for Best Solutions to move code from Dev to Test: 11.1.1.3

Seeking for Best Solutions to move code from Development to Test server: Studio Edition Version 11.1.1.3.0
Development: Hostname: dev; Web logic server: WLSDev; Database: DBDev
Testing: Hostname: test; Web logic server: WLSTest; Database: DBTest
Now how do we take code from Development environment to Test environment? Once code is taken from development, testing team can't touch it.

Lalitk,
The obvious answer is just deploying the same EAR in test that you deployed to production?
What other aspects do you need to deploy? If you have database code/data that needed to be migrated as well, I would copy the production DB to test and then apply all of your DB upgrade/patch scripts against that - in that way you can ensure your upgrade/patch scripts get tested as well.
Are there other things you need to migrate (MDS repositories, security setups, etc)?
John

What is the best Method to transport KMC from DEV to QA & PROD

We are trying to figure out what is the best method to transport KMC from DEV to QA & PROD. Your help and feedback is greatly appreciated.
David

hi,
Refer this thread.
How to transport KM content and configration?
Regards,
Ganesh N

Best way to move photos from iPad to Mac? I have a card reader foriPad and used it on a recent vacation to put pics on iPad. How can I now move them to Mac? Preferably without using iPhoto.

Best way to move photos from iPad to Mac? I have a card reader for iPad and used it on a recent vacation to put pics on iPad. How can I now move them to Mac? Preferably without using iPhoto.

With iPhoto or with the Image Capture application.

Best method to move "previous system-users" to the new user folder

I was doing an Archive and Install of a current 10.5.8 system because of problems with the "usr" folder showing in the root listing of the hd folders while booted from this same hd. I knew that wasn't a good sign.
Anyway, it failed saying that the previous Users could not be moved into the new OS's User folder and they would be placed in the "Previous System" folder.
I have updated the newly installed OS to the latest Apple updates.
Now I'm wondering what is the best method to get the User folders (with lots of data) from the Previous Users folder into the new Users folder so that all the data is recognized.
Thanks in advance!

Just drag contents of the previous Home folder to their respective locations in the new Home folder.
Do not simply drag the entire Home folder into the new /Users/ folder. Just the content of the old Home folder, i.e., Documents, Downloads, etc. The system may prevent you from replacing some folders, so you will need to move the contents of those folders.
Oh, and see this: How to get files from a previous home directory after Archive and Install.
Message was edited by: Kappy

What's the best way to move files from my old G3 to my new Intel DuoCore?

I just received my new Intel DuoCore 17" iMac. For years I have been using a much-loved G3 500 mHz iMac. The new Intel iMac is still in the box, but I believe it shipped with OS 10.4.4. The G3 runs 10.2.6. I have a dial-up connection to the Internet; currently DSL is not available in my neighborhood. What is the best way to move my files from the G3 to the Intel dc? Can I simply connect them with an Ethernet cable and transfer files directly? Or is my best bet to simply save the files I want to transfer to a disc and do it the old-fashioned way? Please forgive me in advance for my ignorance; although I have been a Mac user and supporter for many years, I am astonishingly ignorant when it comes to the best way to using both Mac hardward and software.
iMac Intel DuoCore Mac OS X (10.4.4)

There are two issues - 1. Getting the files moved over, and 2. Being able to open them on the Intel iMac.
1. This can be technically easy if you are willing to spend the time. I moved all my stuff from my old Mac to my new one by hooking the two together with an ethernet cable, directly. You would need both machines to have appropriate IP addresses. (go to the network preferences and pull down the built-in ethernet panel.) Some addresses such as 192.168.1.100 and 192.168.1.101 would work with a subnet mask of 255.255.255.0) Now go to the new iMac and make sure the finder is selected (click on the desktop) and under the "GO" menu select "Connect to Server". You will need to put in the IP address of the old machine, and later it's administrative password. Then select its hard drive from the list (possibly only one choice) and it should appear as an icon on your iMac desktop. You can open this like any other drive and just drag items to the new iMac.
2. Whether you can use all the files moved over from the old G3 is difficult to answer. You may be using Classic mode sometimes on the G3 and have some stuff created with a Classic application. You are probably aware that the new Intel iMac does not support Classic mode, so some of these files may not be useable without a bit of work (or at all, perhaps.) For instance I had to purchase Appleworks to handle some of my old Clarisworks documents because Pages couldn't understand them. Once I had them converted to Appleworks documents, I could then convert them again to Pages documents.
I had some old MacDraw Pro documents that were equally problematic.
I would advise you to get the new iMac out of the box and connected to your dialup internet connection first. Do all the software updates until running software updater says there is nothing new. Then you will be at 10.4.7 with all the latest security and fixes etc. Then disconnect from the internet and use an ethernet cable to get the stuff off the old computer.
There will be lots more to do such as moving your mail, address box entries etc. later, but this is a start.

What is best way to move pictures from laptop to EHD pse10

I have gotten differing views on the best way to move my pictures from my laptop (to free up space) to an EHD while keeping PSE10 on my computer. When I want to do something in PSE10 I would connect my EHD.
It has been suggested to follow the pse10 "back up" procedure but there are no directions on how to get the program to read the EHD after the back up is made (so pse10 can find my pictures on the EHD).
It has been suggested to do a "drag and drop" procedure but I have not been able to get step by step directions for this for pse10.
Can someone please assist me in this task with good directions. I am marginally literate in these things, probably enough to make a big mess if I tried this without consult.
If no one can answer this is there a next level that one can go to?
I have tried chat with Adobe help and they won't help me because I do not have the newest version of pse.

One more thing...
I have a MacBook pro that I'm using to connect to the thunderbolt drives. I believe I should be able to just connect my pc to the Mac via an Ethernet cable and network them, yes? Well, I tried that and could not get it to work. My pc never saw the new network.
You see, part of the problem actually has nothing to do with the transfer process at all. The movie comes with 12tb of footage files. That's ALL the footage shot during their 18 day schedule. However, only certain shots, about 4tb worth, made it into the final cut of the film, and the editor did not separate those shots out for me. So now, I am responsible for manually sifting through all the footage and copying over just the shots that made the final cut. I have a list of the shots needed, and I have an exfat formatted 500gb usb2 drive that so far is performing as well as out can, but it's an incredibly slow process that is compounded by the slow, usb2, copy speeds I'm currently getting.
Would a network connection handling such large amounts of transfers be faster than usb 2?
And also, I tried a free pc utility that allows my pc to read and write to Mac drives, but the transfer speed was so slow that I abandoned that strategy. Would Paragon have faster speeds?

What is the best way to move data from one array to another

I'm going to be moving data from one array to a larger array on the same RAID but different controller. (I have some extra extra drives I'm also going to be installing Retrospect so I can't just restore from a backup.)
The RAID has 450GB of production files, fonts etc.
What is the best way to move the data over?
I saw that someone had suggested using ditto. Would that be better than MacMV?
I also own Bru LE so I could use that.
Any advice would be appreciated.
Thanks,
Paul

Ditto is a great option -- probably the best.
ditto -rsrc src_folder /Volumes/targetvolume/targetfolder

Best way to move data from page to page inside app

Hi all I started writing this and it got way to complicated to explain in full without a novel.
Breif description. I am using query string that starts in the parent window (from href in json file) it then has to be moved into the iframe url when moving to other pages to avoid security as page and iframe are conflicting http and https. and cannot be accessed.. it seems there must be a better way.
So my question is what is the best way in open platform to move data from one page to another?

Hi Liam
Small data just a webapp ID and I am using the URL. But if you pass a ID say from Json ie "href":"/Admin/AppLoader.aspx?client_id=dev-name&ID=111111" it gets passed to the page url. This can be referenced using document.referrer initially. As the app is inside another frame and url that is https there is security issue using parent.location between https and http. Fine but then if you move to a new page referrer is no longer as there is no real referrer and you have to use location but you cannot. Now the work around is to pass the value from the page url to the app url at the start. and then you get around http https security issue when using parent.location but this seems convoluted and like a work around. Is this really the only way or the best way or a bad way. without using other ways that seem over kill for 6 odd characters.

Best wasy to move OC4J from Production to Test MidTier

I've read the documents but I am still lost on the best way to move a OC4J instance to another MidTier
I have 3 separate OC4J instances that are deployed for 3 separate divisions that contain different apps.
What is the easiest way to move them to a different MidTier in a different environment. (in my case same OS,portal 10.1.2 just slightly different layout)
I have worked though the create a test from production and have my test up and running. I just need to deploy the production apps to the test environment. Both have separate MidTiers, Infrastures and database.
I know I can manually recreate OC$J instance names and then manually recreate the apps from the .ear files but is there a easier faster way to do this?
Thanks

Hi,
It's not a simple move, it's an upgrade...
So perhaps transportable tablespace can help you (export from 10gR1 and import into 10gR2 should be work).
Read the following doc for more info and sample :
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10825/dp_export.htm#i1006840
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10739/tspaces.htm#sthref1231
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_import.htm#BEHFFDCD
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14231/tspaces.htm#sthref1267
Or export your db in dump file, on the new server, precreate your db as well, and import like for an upgrade :
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14238/preup.htm#sthref67
Nicolas.
Message was edited by:
N. Gasparotto

What's the best way to move files from my 2012 iMac to my 2014 MBP?

What’s a good way to move files from my 2012 iMac to my MBP?
I prefer to do graphic work on my 21-inch iMac (2012 version). But when I travel I need to copy files to my 2014 MBP. I learned that my 2012 iMac is too old for use of AirDrop, so I’m copying and moving files with a flash drive. That seems slow and clumsy. Is there a better way?

Target Disk Mode would provide a direct connection between the two Macs:
http://support.apple.com/en-us/HT1661
Nothing simpler than that is available.
Ciao.

Best Method to move CATSDB from 4.6 C to ECC 6.0

Similar Messages

Maybe you are looking for