Best monitor for video editing?

Hi,
I have been saving up for a Mac for sometime now and have decided to buy the new Mac Pro when it comes out this December.
I understand that it doesn't come with a monitor so I have been looking into which one would be best to get. I have never had to buy a separate monitor before as I have always had an iMac so maybe there is one that is very popular that most people use that I don't know about. It would mostly be used for video editing on Final Cut and a little bit of Motion and then other general things like music, photos, documents etc.
Ideally 24" or 27" and under £400.

I don't want 2 monitors, so a single 27inch model just what I need... plenty of room for PPro, or I can have a Word document and a Text file open and side by side
John,
That is personal taste and there is no discussing taste. However, from my perspective, and that is personal, I prefer 3840 x 1080 resolution with dual monitors over 1920 x 1080 with a single monitor, but that is because I very often have Firefox, Filezilla, Dreamweaver and some other applications open at the same time, switching between the Adobe forums, Gmail accounts, Notebook results from the PPBM5 data submissions, PPBM5 form submissions, MySQL access, phpadmin pages to update the database, the PPBM5 results pages and various DW .php pages for the maintenance of our database and switching back and forth between various versions of PR. I occasionally really run out of real estate with all these applications and could not consider a single monitor with only 1920 x 1080 resolution, even if it were a 105" screen. In the future I would even like to have a four monitor setup (with MPE hardware support) in a two by two configuration, so that I can freely move my application screens around.
If that happens, notice I say if and not when, my preference for a monitor would be something like 4 Samsung F2380 monitors. Small bezel, great display and panel, affordable.

Similar Messages

What is the best Monitor for Video editing & Graphic Design?

Hi every one,
I would like to find out what is the best monitor for video editing and graphic design that you recomend, I am trying to buy one but not sure which one is good and not expansive.
Thanks very much

I don't want 2 monitors, so a single 27inch model just what I need... plenty of room for PPro, or I can have a Word document and a Text file open and side by side
John,
That is personal taste and there is no discussing taste. However, from my perspective, and that is personal, I prefer 3840 x 1080 resolution with dual monitors over 1920 x 1080 with a single monitor, but that is because I very often have Firefox, Filezilla, Dreamweaver and some other applications open at the same time, switching between the Adobe forums, Gmail accounts, Notebook results from the PPBM5 data submissions, PPBM5 form submissions, MySQL access, phpadmin pages to update the database, the PPBM5 results pages and various DW .php pages for the maintenance of our database and switching back and forth between various versions of PR. I occasionally really run out of real estate with all these applications and could not consider a single monitor with only 1920 x 1080 resolution, even if it were a 105" screen. In the future I would even like to have a four monitor setup (with MPE hardware support) in a two by two configuration, so that I can freely move my application screens around.
If that happens, notice I say if and not when, my preference for a monitor would be something like 4 Samsung F2380 monitors. Small bezel, great display and panel, affordable.

Best Monitors for video editing??? NEC LCD2690WUXi² Vs 24"Apple GLOSSY LED

I am so stuck finding the right monitor for video editing in my price range i just cant afford the 30" apple cinema display, what is next best solution out there...?
Is Anyone using the NEC LCD2690WUXi² Monitors? from what i can tell they are better than the 24" apple LED displays for video editing as...
a) anti glare screen & can be properly colour calibrated
b) 26" screen Vs 24" screen size
c) got DVI-I & DVI-D Connectors so compatible with NVIDIA GT 120 outputs (1 Mini DisplayPort and 1 dual-link DVI-D)
i would love the 30" apple but the NEC comes in at 1/2 the price so i can eventually buy two & i would have definitely taken the 24" but its just not suitable for professional video editing from everything I've read - mainly due to glossy screen, colours & calibration
pls can anyone help with any display solutions/setups
warmest regards
graeme
Oh PS do the NEC LCD2690WUXi² work flawlessly with the latest "Nehalem" Mac Pros?

Not sure if that model number is here or not, but these are supposed to be very good for color work, though I do know that my old shops are still using their CRT's.
http://www.necdisplay.com/Products/Series/?series=171d9fbb-281e-44d8-be67-14d146 e8ada0
Third party monitors are having some trouble with the new Macs. Mostly because of the mini-display ports on the newest Apple supplied cards, but there seem to be other issues as well. You can definitely expect to use the DVI port and leave the mini display for whatever Apple will force on us next.
Apples 24"? Well, it works fine for most but in Apples own description of the display it was made to connect laptops to.
Edit: I'm sorry, for video work? Most anything in the upper end is fine.
Message was edited by: Samsara

Best Monitors for Video editing?

Hey guys. I'm looking at an NEC monitor for editing my stills, and am wondering if this will be suitable for video editing?
Models I'm considering are:
http://www.necdisplay.com/p/desktop-monitors/pa241w-bk
http://www.necdisplay.com/p/desktop-monitors/pa242w-bk
http://www.necdisplay.com/p/desktop-monitors/pa271w-bk
These monitors are great for stills, as they cam emulate paper types well, but do I need a more "vibrant" monitor for video? Just worried that my video will look a bit off on these monitors, as it's such a different medium?
If they aren't suitable, what brand/models are considered good? (Professional level).
Cheers,
Ben

Hey Fuzzy, sorry about the format of this reply. Not sure to quote on here the way you did. Your points are addressed numerically.
1. I haven't seen the user manuals, but using http://www.necdisplay.com/p/desktop-monitors/pa271w-bk for example, under color gamut, there's no mention of Rec709. Compare that to: http://www.eizo.com.au/products/coloredge/cg276/index.html#tab02, under preset modes. Not to mention this entire page: http://www.eizo.com/global/solutions/graphics/video_editing_and_post_production.html.
Just seems like NEC isn't playing up their video editng credentials, and I wonder why?
If you can link me to a user manual for any of the above models, which shows that it ships with Rec709 I'd appreciate it.
2. I couldn't find that artcle, unless you mean: http://www.videomaker.com/article/15133-nec-multisync-pa271w-color-correct-lcd-display-rev iew. In any case, I meant NEC's marketing.
This page has nothing: http://www.necdisplay.com/p/desktop-monitors/pa271w-bk
The incedibly detailed marketing PDF here: http://www.nec-display-solutions.com/p/download/pr/File/cp/Products/LCD/Shared/Brochures/P DF-PASeries.pdf?fn=PASeries.pdf actually contains the phrase "A range of Professional Desktop Displays that are ideal for users in the Photography and Media, Architecture, Engineering, Industrial Design and Precision CAD fields. " (No mention of Video, although it is the first NEC document mentioning "Built in Rec-BT709")
You have to understand that for a comsumer such as myself, not spelling these things out is going to make me look for answers. Or go to a company that does spell it out.
3. Got it, thanks.
4. I think I get that. I'll read the article. But... do these NEC monitors comply?

Dual 17'' Displays and an NTSC Monitor for Video Editing

I am trying to hook up two 17'' apple monitors and an NTSC television monitor for video editing, but all I have on the back of my G5 tower is one ADC plug and one DVI plug. Any advice on how to make this work would be greatly appreciated.

If you run in anything other than the LCD's native resolution your graphics card will be resampling the image. This inevitably distorts the image as pixels must be discarded to create the display. Typically this softens the image.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Is a ATI Radeon X1900XT (512 MB) card enough to drive a single monitor for video editing

My son just given an older mac pro.
2 x 3 GHZ Quad Intel Xeon.
OSX Lion
The video card installed is an ATI Radeon X1900XT (512 MB)
Is this video card sufficient to drive a single monitor for video editing and basic graphics work in PhotoShop, etc?
Many thanks.

nothing I guess
Just noticed that you can add emoticons to these posts.

Which of these would be the best iMac for video editing?

Hello, pretty simple question, which of these 2 iMac configurations would be best suited for video editing? I want to use Final Cut Pro X and Adobe After Effects (not cutting edge effects just simple stuff).
Option 1 - 21.5 inch
3.1GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
16GB 1600MHz DDR3 SDRAM - 2X8GB
1TB Fusion Drive
NVIDIA GeForce GT 750M 1GB GDDR5
Option 2 - 27 inch
3.4GHz Quad-core Intel Core i5, Turbo Boost up to 3.8GHz
8GB 1600MHz DDR3 SDRAM - 2X4GB
1TB Serial ATA Drive @ 7200 rpm
NVIDIA GeForce GTX 775M 2GB GDDR5
For some reason Apple don't offer more than 1GB of dedicated video ram in anything but the maxed out 27inch. Personally, I’m not fussed about the bigger screen and I would say that having the faster processor, double the ram and a fusion drive would be more beneficial than the extra gig in the video card but I’m not 100% sure, what do you guys think?
Thanks.

If you do a significant amount of video editing the larger display is nice but not absolutely necessary. I’d also recommend an SSD or Fusion drive rather than the stock mechanical drive which really is dog slow. If you choose an SSD 8GB will be plenty though 16GB is better if you go with the smaller model.

LCD Monitor for Video Editing: Resolution Concern

I am trying to select an LCD monitor for my newly built computer. I have zeroed in on the DELL SP2309W, 23" Full HD Widescreen Flat Panel Monitor with Webcam. The optical resolution is Higher than Full HD at 2048 x 1152.
It is my understanding that Higher than HD Resolution is good for multi-tasking (but DVD movies get stretched and therefore the quality of your videos goes down.), but is it good for video editing with Premiere Elements 7 or 8? Should I be looking at monitors with 1920 x 1080 resolution?

If you run in anything other than the LCD's native resolution your graphics card will be resampling the image. This inevitably distorts the image as pixels must be discarded to create the display. Typically this softens the image.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Using external monitor for video editing.

Hello all,
I own a IMAC that I use for video editing on FC7. I was wondering via Thunderbolt to VGA (or any other way) if there was a way to use an external moniter as my canvus and the internal comands to do so. Also the opinons of doing this. Good? Bad? any good ideas?
Thanks.

Eeewww! Oh, the horror of what you are trying to suggest!
No. A video signal for a computer display and a video signal intended for TV are very very different things. If you want to PROPERLY see what the video you shot looks like, a computer monitor is the LAST place to look. You want to use an HDTV at least. I'd even say avoid computer displays with HDMI inputs...but even those are better than VGA. VGA is a very low quality connection. DVI, HDMI...those are better.
But if your intention is to view your video at full quality...an HDTV is your better option.

Best configuration for video editing ?

my boss wants to buy a best computer for our future projects. we are a small studio so we don't have really big budget. so I am thinking 2.66 cpu, 4gb memory, x1900 graphic card...
we are going to do, some 3D and video editing, and all other graphics stuff.
any suggestions?
do I need 8core or 4 core 3.0 cpu?

I don't know if you have seen it
but in [this thread:http://discussions.apple.com/message.jspa?messageID=5800151#5800151 we (so far two forum members and I) discussed about machine configuration options and other technical aspects!
I wish to insist on a point, do test (if you can) and read a lot before you buy!
Best,
G.

Best Monitor for Image Editing?

Hi people!
Since Apple is making super-bright-extra-saturated monitors since the LED technology, I'm wondering which monitor would be good for image editing. I noticed that the LED one has too much contrast and the images looks like "already edited" in these monitors, but they're not. Is there a way to change that instead of buying a new monitor, for example? Like using a monitor calibrator, but certainly, I have found that Spyder Software to do so (or the one which comes with the Macintosh) has complicated user interface.
Any suggestion?
Thanks,
Ø3

Gemmac:
Welcome to the Apple Discussions. My preference has to be Adobe Photoshop Elements 4.0 (Mac). It's the little brother of the standard of the industry in image editing, Photoshop. Here's an example of some of it's advanced editing capabilities.
Do you Twango?
G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD, Mac OS X (10.4.7) 22 LCD Display, 200G & 160G FW HDs, Canon S400, i850 & LIDE 50, Epson R200

Best display profile for video editing

Among the choices you see under Display Profile on a Mac, what is considered "best" choice for video editing, so that you can assess color, exposure, etc. in your footage as you edit? I have always used Adobe RGB (1998), but realize that I have no knowledge about whether that's a good choice.
What do the 'good' editors use (to differentiate them from guys like me)? Do top editors calibrate their monitors for video editing? Any insights into this would be greatly appreciated!
-- Mark Strand

what is considered "best" choice for video editing
there is only one setting for Final Cut; Generic RGB
This is an apple stipulation, its how Final Cut must be set up, choosing any other profile will cause problems with any out put files you create.
Do top editors calibrate their monitors for video
ICC colour management is designed and can only be used for still image files eg. so while you can calibrate a computer monitor it can only be used with still image files; TIFF CRW JPEG PSD. ICC profiles are not recognised by Final Cut Pro or QuickTime.
The colour management system used in video involves using video scopes, an accurate PAL or NTSC colour monitor and tools like the 3 way colour corrector.

Which configurations are really important for video editing?

Hi everyone,
I'm a newbie looking for the best compromise budget Mac for AVCHD 1080p video editing with Final Cut Pro X, Adobe Premiere CS6 and Adobe Aftereffects. The storage space is not important as I'm planning to keep all the files on a Thunderbolt-connected EHD (any comments on this?).
Currently, I'm working on a iMac 27'' 3.4GHz i7 16GB 1600 MHz DDR3 NVIDIA GeForce GTX 675 MX 1024 MB and would like to get a personal machine that also works (as) smooth, but for a smaller budget. These are the options I currently have:
1. Mac mini (late 2012) MD387xx/A
2.5GHz dual-core Intel Core i5
16GB DDR3 SDRAM
Intel HD 4000
500 GB HD
Thunderbolt USB 3
802.11n WiFi + Bluetooth 4.0
2. iMac 27'' (mid 2011)
2.7GHZ Intel Core i5
16GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
1TB HDD
3. MacBook Pro 17'' (early 2011)
2.3GHz Intel Core i7
8 GB 1333 MHz DDR3 RAM
AMD Radeon HD 6750M 1024 MB
Intel HD Graphics 3000 512 MB
500 GB SATA Storage
How important is the duo- or quad-core?
Which graphic card would be the best suited for video editing and graphics on FCPX/AfterEffects?
Which one would you go for if looking for a stable, strong performance for up to 5 years?
Thanks in advance for any tips!

I would also post here:
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

Which of these macs would you choose for video editing?

The main difference is the MBP has an Serial ATA drive, and the Air has a Flash drive. Also the MPB has 2.9Ghz, and the Air has only 2.0Ghz. Which one would you pick for editing with Final Cut Pro X? (Also curious which one you would pick even if video editing wasn't a concern for you, thanks!)
MacBook Pro 13.3” - Dual-Core i7 2.9Ghz ($1269 refurb, or $1399 new at BestBuy)
Eligible for OS X Mountain Lion Up-to-Date Program
Originally released June 2012
13.3-inch (diagonal) LED-backlit glossy widescreen display, 1280-by-800 resolution
8GB (2 x 4GB) of 1600MHz DDR3 SDRAM
750GB Serial ATA @ 5400 rpm
8x double-layer SuperDrive (DVD±R DL/DVD±RW/CD-RW)
Intel HD Graphics 4000
Or
MacBook Air 13.3” - Dual-Core i7 2Ghz ($1449 refurb)
Eligible for OS X Mountain Lion Up-to-Date Program
Originally released June 2012
13.3-inch (diagonal) LED-backlit glossy widescreen display, 1440-by-900 resolution
8GB memory
512GB flash storage
720p FaceTime HD camera
Intel HD Graphics 4000

Zenman1969 wrote:
Thanks for the answer. Didn't realize the 13" MBPs differed from the 15" MBPs. I thought the screen was the only major difference.
Apple fools a lot of people with that. The 13" is really a MacBook and not a "Pro" machine.
The best machine for video editing depends upon what your going to do, full on production or casual home stuff.
A 15" MacBook Pro and a iMac for the casual lightweight stuff and iMove can do the job.
The new MacPro coming out for the heavy duty stuff.
The industry seems to be moving away from Final Cut Pro X as it's been consumerized or something, lacking needed features and moving towards Avid on powerful Mac's or Windows 7 towers.
http://arstechnica.com/apple/2011/07/does-apple-still-care-about-creative-pros/
http://www.avid.com/US/
So perhaps a mix of Avid and Final Cut Pro X if your serious about furthering your career.

Which do you think; Windows 7: 32-bit / 64-bit, (plus unused RAM issues) is best for video editing?

Hi there!
Just received delivery of a Lenovo G550 with the following spec:
2.2Ghz Core 2 Duo,
4GB (DDR3 - 1066Hz) RAM,
500GB HDD
NVIDIA GeForce G210M (512MB)
Windows 7
The entire purpose for buying this laptop, was for video editing and it is the best spec I could find for my needs and budget.
So what's the problem?
1) Windows 7 is installed as 32-bit, not 64 bit. Why is this? I was given no choice in this decision.
2) Only 2.96GB of that juicey RAM is being used by Windows 7. I need as much RAM as possible for video editing.
3) Lenovo sent NO install disc. - When I eventually get a virus or my HDD fails, I have NO WAY to clean install the very product I have just purchased! (A laptop with Windows 7 OS).
Considerations:
As I understand it (please comment if there are alternative views on this); The 64-bit architecture is only useful for compatible software which has been designed to run 64-bit.
The video editing software I use is "Sony Vegas Movie Studio HD 9.0"
The suggested problems with Windows 7 run as 64-bit include:
* Possible lack of driver compatibility support.
* Possibility of 32-bit programs running SLOWER in 64-bit environment, than their native 32-bit environment.
* Higher running temperatures & processor cooling issues.
* No performance gains for all other programs running as 32-bit (email, internet browser, etc).
The suggested advantages with Windows 7 run as 64-bit could be:
* Full utilisation of the 4GB RAM. (Presently limited to 2.96GB)
* Faster rendering and video editing tasks in 64-bit environment.
Questions:
4) How can I get an install disc for Windows 7? Shouldn't this come with the computer?
5) Do you think the potential hassle and architecture conflicts are worth suffering, to get the reported performance gains of 64-bit architecture and the remaining unused RAM?
Thank you for any help and advice!

contact lenovo support line for windows 7 dvds, but make sure if they send recovery dvds instead of windows 7 dvd.
most of people are having trouble with installing windows and drivers, so companies has found as this as solution to send recovery dvd -if asked- or using hidden partition to recovery system - like one key recover - instead of.
but if you ask me, they need to send dvds.
i'll contact the mods and admins about this issue, please stay connected to this post.
anyp wrote:
the member should contact lenovo, as of recently users are entitled to request media for 32 / 64 bit if they purchased one and want the other.

Best monitor for video editing?

Similar Messages

Maybe you are looking for