Best Nokia for Voice Dialing?

I have the 6300 and find the voice dialling all but useless. Neither do I need a voice tag for every contact. Assuming that Nokia do not intend, by means of a F/W update, to allow users to either disable the VD or record their own tags then can anybody suggest a suitable replacement for the 6300?...preferably one where I can record my own tags for about ten contacts or less. Or perhaps if I could erase the tags on all but the contacts I want...that might help.

The older phones such as the 6230i uses tags. Nokia for their own reasons switched the newer phones from using tags to SIND. Hence, I don't think they will be switching back to using tags. It is more likely that they will continue improving SIND.
It was a little messy at the start but within a couple of days I was getting reasonable results. 

Similar Messages

  • HT1349 What is the best app for voice caller ID for Iphone 4s

    Waht is the best app for voice caller ID for I Phone 4s

    Please post to the iPhone forum, not the Enterprise forum.

  • Best practices for Voice over MetroRing

    Hi, We have installed a MetroRing Gigabit Ethernet using 3550 and 6500 Catalyst switches. Today, only data is running, but looking at tomorrow, when voice/video be requested, I am trying to find some best practices for QoS or traffic classification. If you can point me to some of them will be great.

    Hi,
    You might also find those useful: " LAN QoS"
    http://www.cisco.com/web/about/ac123/ac147/ac174/ac176/about_cisco_ipj_archive_article09186a00800c83cd.html
    and "Cisco AutoQoS White Paper"
    http://www.cisco.com/en/US/tech/tk543/tk759/technologies_white_paper09186a00801348bc.shtml
    as well as "Configuring QoS" for Catalyst 6500 switches
    http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a008007fb2b.html
    The most comprehensive starting point will be: "Quality of Service (QoS)"
    http://www.cisco.com/en/US/tech/tk543/tsd_technology_support_category_home.html
    Did this help?
    Martin

  • Best position for voice recording ?

    What is the best position for iPhone to voice record (with official apple app) ? On its back side ? Front side ? Others ?

    It uses the same microphone you use for making phone calls. Amny position that doesn't obstruct it should work.

  • Nokia 6280 Voice Dialing

    Hi Wong here,
    Can any one help me on Nokia 6280.
    How to make a voice dialing call.
    I try it by pressing the right button, it show me Voice system Error.

    Sometimes it helps to change the phone language to non-english and then back to english.

  • Limit number of names for voice dialing

    I have a Blackberry 8100 and over 3,000 names in the contacts.  I want to use voice dialing, but want to limit the number of names the programs searches through to say maybe 50 names.  Is there a way to do that?  Is there some program where I can enter the names that I want it to search?  Thanks so much for helping!
    Nancy

    I'm afraid that is not possible...
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Siri is prompting to unlock Iphone 6 when pressing home button for voice dial of existing contact

    Just upgraded me to an IPhone 6. I restored my new phone from recent back up so all contacts, etc. are there. Also updated to latest OS.
    If I depress the home button Siri is now prompting me to unlock my IPhone.
    Scenario:
    Depress Home button to activate Siri
    Say "Call Home:"
    Siri responds "You'll need unlock your IPhone first"
    Unlock IPhone
    Siri responds "Just to confirm - you'd like to call home".
    I used to be able to just say "Call home" and it would just dial.....no unlock...no confirmation.
    What's changed? Is there a setting I need to tweak?
    Running iOS 8.1.1
    Thanks

    Hi teturner,
    I'm sorry to hear you are having issues with your new iPhone 6. If you are unable to voice dial from your lock screen, you may want to see if the setting to disable Siri when the phone is locked is enabled, as is noted here:
    Prevent access to Siri when iPhone is locked. Go to Settings > Touch ID & Passcode (iPhone models with Touch ID) or Settings > Passcode (other models). You can also disable Siri by turning on restrictions. See Restrictions.
    Siri settings - iPhone
    Regards,
    - Brenden

  • Best Tool for Voice Editing?

    Hi everyone,
    I produce a few podcasts done in Second Life using thier somewhat dodgy voice client, and skype and talkshoe and things like this. The quality of the recorded audio can be less than stellar, as you can imagine..
    So, I don't write songs, but I DO need to clean up and edit and work with somtimes LARGE (2hrs or more on occasion) group voice chats.
    Is Logic express my best bet? Or something else?
    Garageband can't handle the file lengths and does not seem to have enough power...
    thx

    It really depends of how indepth you want to get. Logic Express is a good choice. It is extremely flexible in the sense that you can do some really good recording and then you load pluggins that help with editing you recordings. You can find some free pluggins on the net or you can purchase some from places like guitar center or sweetwater. Plus if you know how to use garageband then moving into logic shouldn't be too difficult. I personally use Pro Tools to do my editing but I think it may be a bit much but check out their website. Digidesign.com

  • Nokia 6280 Voice Dialing Problem...Help

    Can anyone tell me how to make a voice call?
    I try to press the right button and show me Voice System Error.

    Hi,
    My 6280 is a V 03.81 firmware, used in French language.
    I did not experience your own problem, but I have another one.
    When the phone voice repeats my command, the volume of this voice is very low and almost unaudible.
    I did not find the solution to fix this prolem.
    Has someone an idea ?
    Thank you for help.

  • Best program for voice on LAN network?

    I want to be able to talk to my students quickly when they have a question but iChat takes too long to establish the Voice connections. Is there a better/faster program I can use?
    Thanks,
    todd

    Hi,
    I am not sure there is anything else full stop.
    iChat can be somewhat speeded up by setting it to Auto accept.
    In iChat Menu > Preferences > Alerts set the top item to Receive Audio Invite
    Use the AppleScript Item to Select the Auto Accept (it is a Universal AppleScript that will only use the bit you need)
    Obviously this needs to be done on the Student machines but will reduce the number of Clicks and dealing with windows/Invite pop ups for the student.
    MSN for Mac does not do Video (unless it is connected to an Windows Server whose name I forget).
    Yahoo does not do Audio
    2:30 PM Saturday; January 10, 2009

  • Best program for voice over in slideshow?

    I want to make a 30 minute slide show with voiceover.  Should I make it in iDVD, iPhoto, iMovie, or something else?

    A Garageband Podcast would work pretty good, too.
    http://www.apple.com/education/reachall/learn/docs/GarageBand_Podcast_Step_Card. pdf

  • Disable voice dial on Nokia 6263.

    I have an Australian accent, so the voice dial feature is about as useful to me as a cardboard umbrella. Unfortunately it seems that even after turning off every voice-related option I can, if I nudge, knock, brush, or even press the button on my headset to turn it off for to short a time it will decide "oh, that's a tap, he wants to voice dial".
    It's worse than having a 5 year old who's just discovered how to speed dial.
    I want to gut, eviscerate, eliminate, disintegrate, annihilate, and disable with extreme prejudice every jot, tittle, pinch, hint, or skerrick of support for "voice dial" in my Nokia 6263.
    Am I SOL?

    atti wrote:
    Well, i have a nokia 5310, i had the same problem, call some of my contacts couple of time a day.
    But my voice dialing activation key is not the volume but the clip button on the wired headphone, or the one on the top right.
    I did lots of research on this, I don't how to diable this, and find it work(stop random calling my contacts) by myself if I lock the phone with a security key activated. Once the keyboard is locked, you can not dial unless you insert the security key.
    <how to activate the security key>---main menu---->setting---->phones setting ----->security keyguard on------->setup your security keyguard. If you don't want to activate your security keyguard, you can turn it off any time. Also, change your security code by going to  main menu---->settting---->security---->access code---->change security code.
    Cheers!
    I also have a Nokia 5310 and was having the same problem.  I found that after I reset the phone settings (menu>settings>Rest.factory sett.>Restore settings only), when voice dialing is activated, the phone activates the "train voice recognition" feature instead of actually doing any voice recognition/voice dialing.  The phone just sits there and waits for user input.  I'm not sure if the 6263 has a "train voice recognition" feature, but if it does, this may work for you.

  • N73 Firmware upgrade--- bad working Voice dialing

    I updated the firmware of my Nokia N73 from 268.0.0.3 to 368.0.0.1. With the older version delivered by the phone voice dialing worked. In the 268.0.0.3 I only could given voice command for the profiles not for the contacts. It didn't recognise any contact. Because of thos I decided to do the next firmware upgrade to 368.0.0.1 and now the voice dialing doesn't work at all. Each time I put the button to activate it tells me "fualty voicesystem"in dutch "fout spraaksysteem. Now it became even worser. Is there anyone who helps me out?
    regards

    16-Dec-2006
    03:34 PM
    conradus wrote:
    Thank you for your reaction. I put the firmware for the second time to my phone. Now it seems working again. When I touch the button for voice dialing it works untill then. But I may ask for every contact in my contactlist but nothing happens. When I touch the button again it is not reacting then but only the second time. When i asked for an other profile it sometimes works. In my contactlist it is possible to hear the contactname. But via voice dialing none of the contacts to choose.
    best regards
    Voice Dialling seems to be a bit choppy on most of the N-series models, because they use speech synthesis. Whereas this works for profile names, it's a different tackle for contact names. This is because contact names are assigned by assigned by you, the user. If you select Play Voice Tag for any given contact in your phone, it will output this name using speech synthesis. You will have to EXACTLY copy this output. And, if the name of a certain user is "John Doe Geralds", it wouldn't suffice to simply say "John Doe". You'd HAVE to put Geralds behind that, and in the EXACT same way as the device says it.
    The only way to change a voice label for any given name is to change the name itself. The same goes for profile names and commands, but I wouldn't change these as the defaults work fine.
    A reason because of which voice dialling may not work can also be found in the user's voice details having become useless for the phone. To correct this, go to Tools> Voice commands > Options > Settings and choose: Reset Voice Adaptations. Note that carrying this out means that ALL data collected about your voice shall be lost; you might have a bit of difficulty using voice features the first couple of times after performing this instruction. Beware to EXACTLY copy whatever the phone says, even though you know real-world pronunciation to be different. Until now, I haven't had to actually adjust the pitch of my voice to the synthesizer's pitch, but I know this would improve recognition accuracy.
    Oh yeah... Sorry for my late reaction!
    Best regards,
    V3.0704.1.0.1
    19-01-2007
    RM-133 Nokia N73(57.01) Product Code:0539338

  • Xperia Z3 voice dialing

    Good evening,
    Sorry if I open a post that already exist, I look and don t find. I update my Sony Z3 at 5.0 Lollipop and I don't know if have or can get from market google play the voice dialing? I connect my Phone via Bluetooth at car navigation but don t find Voice Dialing like have before at Samsung S4. I try many application but don t find.
    Wait your answer if can help me.
    Best regards,
    Solved!
    Go to Solution.

    The app responsible for voice dialing is Google Now, it comes pre-installed on your mobile. You can activate it by hitting the call button in your car, or saying "OK Google". To make sure that this option is activated do the following:
    Go to you App drawer and open "Google Settings -> Search & Now -> Voice -> Hands-free -> Allow requests with device locked for bluetooth devices
    Go back, open "OK Google detection" and activate "From any screen"
    A proud Sony User since 2002
    If I was helpful to you, thank me by Kudos

  • 8310 voice dialing

    hello group,
    when using the call command for voice dialing do you use contact's first name or full name?

    Hi and welcome to the forums!
    I think the best you can do is to go to options, voice dialing, and disable the audio prompts and playback options.
    The options will still flash on the screen, but you won't hear anything. Pressing the end key ends the program
    which stops loading the contacts.
    Oh, and make sure you don't have it on a convenience key.
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Maybe you are looking for

  • Need help in creating Buttons in ADF10g

    Hi, My questions are: 1. Is it possible to modify the width of row in ADF10g. Because the width of rows in my output are high. So I want to reduce it. 2. I need help in creating a new 'createbutton' to create a newlist for the table . for this I have

  • Using Sqlldr to load VARRAYs!!!!!!!

    HI, I've created a collection type within the database the description of which reads as follows..... SQL> desc LISTVARCHAR LISTVARCHAR VARRAY(200) OF VARCHAR2(4000) But when I try to insert a value of more than 255 characters using sqlldr, it seems

  • REPORT PAINTER - Add a field to a selection screen - custom report

    Hi, I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so? Thanks a lot, Julien

  • Errors found in the burning process

    I use to never have problems burning iDvd's. Now every time I try, it comes up with this message about an hour after working on the dvd: "The recording device reported the media error: Power calibration area error. (0x73, 0x03.)" What does that mean

  • Library of Clips

    Im fairly new with iMovie so please forgive. I want to import from the camcorder to iMovie and then save the individual clips as separate files into a directory structure that allows me to organize them in what ever way I want. However I do not want