Best note taking software?

Best with Mt Lion?
Note Taker HD?
Notebook (Circus Ponies)?
Notes Tab?
Other(s)?
Thanks.

I used it a lot in the past. The UI for me is a little over the top, and it doesn't sync with other Macs, which is important for me. Also, sync with iPad is kinda goofy, which also would be an issue for me.

Similar Messages

Best Note Taking Software for Mac?

I'm a current college student and will soon be going to grad school as well. I Use my laptop all the time to take notes in class. On my pc, I was nuts over Microsoft OneNote 2003.
What programs for Mac do all of you students use to take notes with? Anything like OneNote? Anything better that I'm unaware of? Calling all students!!
Thanks
Emachines M6811 AMD 2.2Ghz. 512 MB RAM Windows XP

The best I have found is actually Microsoft Word. You may not know this, but in the Project Gallery select Notebook, and you will be greeted with a page and abilities very similar to OneNote. The best part is, it's free with MS Office, which I assume you have since you are a student. I haven't looked around a whole lot for otehr programs, but as far as I'm concerned there isn't really any reason to.

Looking for note taking software to use with a graphics tablet

Hello folks,
I am trying to find a software that would allow me to interchangably use typing and writing/drawing on a graphics tablet smoothly.
I'm looking for something that would essentially provide a 'blank sheet of lined-paper' where i can quickly type what my professors are saying, as well as easily draw whatever they are drawing. Also, since I am studying engineering, I would need something that I can easily write math symbols and equations so I can use it as scratch paper.
At the same time, I am looking to save trees and money, as well as keep organized and simplicity when it comes to archiving.
I have tried Microsoft Word 2008's notebook view, and this is currently the closest thing to what I want, but it favors mostly the text side of what I want (of course), and isn't very good in the drawing part. It also isn't very smooth when I try to do practice math/physics/engineering problems on it, nor is it very good at drawing molecular structures (O-Chem)... but for the most part, it gets the job done. It is also a headache because when you zoom in a lot to make it easier to write (mind you, I am using a tiny macbook screen..), the title bar also zooms in, and ends up taking half of the screen, making zooming in practically useless. (the title bar is also locked, so even as you scroll down, it stays in the top half.)
I have also tried Adobe Acrobat Professional 7, where I simply made a blank notebook from some image online, and I use it as scratch paper. When it comes to drawing, it is very smooth, but it's a headache sometimes, because after writing something and pausing for a second or two, the pen tool automatically becomes a 'selector' tool, and so if i want to draw over what I previously wrote, it changes to selector and instead of writing over, it drags and drops the object around a bit. The tolerance for that is really high too, and i'd have to bring the pointer about half an inch or so before I can start writing something again. I also haven't given the text a try yet, but it lets me make collapseable text boxes, so that is good for further annotating my equations and drawings, but isn't very useful for a full-lecture class (i.e. biology)
I also don't even want to consider photoshop, because it's basically too powerful, and I don't want my laptop fans going off in-class (its SUPER loud when it happens...) and I need it to last the day.
So just a sum up:
I'm looking for a good note-taking software (for mac) that will allow me to smoothly use my graphics tablet AND be able to type.
MS Word '08 and Adobe Acrobat are close... but aren't quite to what I want exactly...
I have a Wacom Bamboo tablet and an '09 Intel-based MacBook.
Thank you in advance!

I have had this same issue and found this program called NoteBook that allows you to type, and draw (write) notes on a variety of paper types, (lined, graphing, engineering,etc.) and it uses the .nb file type that allows you to save multiple "pages" inside one file in a sort-of "notebook" if you will. It works great, but has several minor disadvantages. I can't change the ink color, I can't change the tip thickness (other than the pressure sensitive option with my wacom graphics tablet), and it doesn't allow you to open pdfs or other documents to inscribe upon. All around though it has been wonderful. There are really no good note taking apps out there...

I have erased my iphone 3 and want to reinstall the software but my phone is not taking software.

In reset setting i have used erase iphone option and after erasing the whole setting and contents i want to reinstall the software but my phone is not starting up only the apple image is there on the main screen. how can i reinstall software in my phone.

Was your iPhone jailbroken ?
Put it in DFU mode so that iTunes recognizes it in Recovery mode. Restore.

I lost app when upgrading to 5.0here did it go...important app I use for note taking at work!

I upgraded my iPad 1 to the new iOS, 5.0, and it removed an application I downloaded from the Apple Store called Noteworthy. It was a note taking software, and it's been upgraded a few times since I bought it, so I know it's legitimate. I lost all my notes, etc. Anyone have advice? This is pretty critical for me!

Apple stepped me through the backup restore, only to find out it was all gone. VERY UNHAPPY with APPLE, and am planning to tell everyone I know. Step one of any upgrade should be to conduct a back-up, and confirm it with the user. I guess Apple thinks they are above process? Oh well...eight months of notes flushed away. I guess I should not have had a choice in keeping those, right??? APPLE BITES!

I'm going to be a senior this year and my school is switching over to the iPad for classroom activities. Which iPad is the best for taking notes, researching, studying, reading, etc?

I'm going to be a senior this year and my school is switching over to the iPad for classroom activities. Which iPad is the best for taking notes, researching, studying, reading, etc?

I Recommend the iPad Mini Retina, it's not to big, and not to small. It has the speed of the iPad Air due to it having the same 64 Bit chips. ( And it's a lot cheaper!!) I have one myself and it's perfect for my school work!
iPad Mini
http://www.apple.com/ipad-mini/
or don't 'to take my word for it, compare the iPads!
http://www.apple.com/ipad/compare/

What is the best system maintenance software to use for a MBP??

Hello everyone, I was formerly using Mac Tune-up for my Macbook Pro and it did an okay job but I am not sure what Mac software I should be using to keep my system clean while keeping it running at optimal performance. Turns-out I can no longer use Mac Tune-Up since I upgraded to Mavericks from Snow Leopard. Can anyone recommend to me the best system maintenance software to use for my MBP with Mavericks OS and where I can get it (a link or site URL)? Thanks in advance!

How to maintain a Mac
1. Make two or more backups of all your files, keeping at least one off site at all times in case of disaster. One backup is not enough to be safe. Don’t back up your backups; all should be made directly from the original data. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of trouble with system updates.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
It's not much of an exaggeration to say that the whole "utility" software industry for the Mac is a fraud on consumers. The most extreme examples are the "CleanMyMac" and “MacKeeper” scams, but there are many others.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for, and doesn't change the way other software works.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve. Do not rely on "utilities" such as "AppCleaner" and the like that purport to remove software.
4. Don't install bad, conflicting, or unnecessary fonts. Whenever you install new fonts, use the validation feature of the built-in Font Book application to make sure the fonts aren't defective and don't conflict with each other or with others that you already have. See the built-in help and this support article for instructions. Deactivate or remove fonts that you don't really need to speed up application launching.
5. Avoid malware. Malware is malicious software that circulates on the Internet. This kind of attack on OS X was once so rare that it was hardly a concern, but malware is now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it—the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness—not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
6. Don't fill up your disk/SSD. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a startup failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
7. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
To use a Mac effectively, you have to free yourself from the Windows mindset that every computer needs regular downtime maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform. A well-made computing device is not something you should have to think about much. It should be an almost transparent medium through which you communicate, work, and play. If you want a machine that needs a lot of attention, use a PC.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Looking for a good note taking app: Are there new features for the Notes app in iOS6?

Hi,
I've read that the Notes app with Mountain Lion will be available for OS X as well, and I was wondering if there will be any significant updates to the Notes app coming in iOS 6?
The Notes app in Mountain Lion supports, as far as I know, text formatting, images and attachments. The Notes app in iOS 5 does not have any of these features, yet still it is claimed that the OS X client will sync with the iPhone, iPad and iPod touch. This means that there must be some rather significant updates coming for the Notes app in iOS 6 to match up with the features of its Mac counterpart. Still, no updates to the Notes app are listed in any of the iOS 6 feature lists I've seen so far.
I'm looking for a good note taking app for OS X and iOS. I don't like how Springpad works, neither did Evernote work out for me, it's just too complex - I like Simplenote a lot though, it's just that its approach is too radical in my opinion. I was thinking that the Mountain Lion Notes app might be a good alternative because it combines simplicity with rich text formatting and attachments. I kind of hate the skeuomorphic user interface though.
best, Ian

You are only addressing other iPad users here & no Apple employees. We have no way of knowing, so you'll have to wait until iOS 6 is released.
Here's some general info.
Working with Notes and Documents on the iPad – Alternatives & Suggestions
http://ipadacademy.com/2012/04/working-with-notes-and-documents-on-the-ipad-alte rnatives-suggestions
 Cheers, Tom

Group Policy - User Rights Assignments not taking effect on workstation`

Novell 5.1 SP7. ZenWorks 3.2 sp3. Windows XP Pro workstations.
In Group Policy, (Computer Configuration/Windows Settings/Security
Settings/Local Policies/User Rights Assignment), I have added Power Users to
the "Load and Unload device drivers" policy. However this setting is not
taking effect on my Windows XP workstations. My DLU policy for users is
configured to have the users members of the "Users" and "Power Users" groups
on the local PC.
Other parts of Group Policy (Computer Policy/Administrative Templates) are
taking effect on the workstation, so I'm wondering if the problem I am
having is related to Security Settings only.
I enabled Group Policy logging on the Windows XP workstation and include it
below:
WMHelperInitialization (Mar 4 2004) called! Flags: 0x8001002. Event:
0x1000. Impersonation: 0x2
Created Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x204
WMHelperSystemEntryEx called!
Entered GPCleanupEntry
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Reading Persist Workstation settings from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Persist
Workstation settings not found. Assuming 0
Error 2 reading Persist Workstation settings
Entered RestoreOriginalGP.
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring backup GP from C:\WINDOWS\System32\GroupPolicy.WMOriginal
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.WMOriginal,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Warning: C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini does not exist
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy Machine Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy Machine Status in key
Software\Novell\Workstation Manager\Group Policies
Exiting RestoreOriginalGP 0x0
Entered AppendSecuritySettings
Inf path: C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Restoring GP settings
Loading Account Policies...
Loading Audit Policies...
Loading user rights...
Restoring security options...
No data
No data
No data
No data
No data
No data
No data
No data
Renamed Administrator account: Administrator
Local Administrator's user name = Administrator
Administrator account names match, skipping.
Renamed Guest account: Guest
Local Guest's user name = Guest
Guest account names match, skipping.
LoadXPSecuritySettings returning 0
LoadHive entered
LoadHive exit : 0
Exiting AppendSecuritySettings 0x0
GPCleanupEntry releasing mutex.
Exiting GPCleanupEntry: 0
Exiting WMHelperSystemEntryEx ccode: 0x0
Closing log file.
WMHelperInitialization (Mar 4 2004) called! Flags: 0x0. Event: 0x0.
Impersonation: 0x0
Created Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x11
Entering WMHelperInteractiveUserEntry!
szFullDN = CN=wintest3.OU=Users.OU=Newcastle.O=OSG
DN is Typed convert it to TYPELESS
g_szUserDN = wintest3.Users.Newcastle.OSG
GinaGetUsersSIDInTextualForm ENTERED
Textual SID : S-1-5-21-1214440339-507921405-1708537768-1019
GinaGetUsersSIDInTextualForm EXIT : 0
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Entered CheckForObsoleteWksCache .
No workstation. Exiting CheckForObsoleteWksCache
Applying user policies
Reading Don't reparse from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value Don't reparse: 0x0 in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Entering ApplyPolicies
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Flags: 0x80000070
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Impersonating logged on user.
Context : OU=Users.OU=Newcastle.O=OSG
Full Object DN CN=wintest3.OU=Users.OU=Newcastle.O=OSG
Calling WMGetAllAssociatedObjects(FALSE, MARITIME, 1,
CN=wintest3.OU=Users.OU=Newcastle.O=OSG, WINNT Workstation Package,
zenwmGroupPolicy, 512, pBuffer)
Reverting to system impersonation.
Found DN CN=XP User Package:WinNT-2000-XP:Windows Group Policy.OU=Policy
Packages.OU=Newcastle.O=OSG
WMCheckIfGroupPolicyObjectsChanged entered
Impersonating logged on user.
Reverting to system impersonation.
Group Policy object has NOT changed!
Exiting WMCheckIfGroupPolicyObjectsChanged 0x0
Entered ScheduleCleanup.
Loaded wmschapi.dll
Calling WMScheduleAction
Finished Calling WMScheduleAction. Returned 0x0
Exiting ScheduleCleanup 0x0
Entered BackupOriginalGP.
No backup exists. Creating one: C:\WINDOWS\System32\GroupPolicy.WMOriginal
Backing up original GP to C:\WINDOWS\System32\GroupPolicy.WMOriginal
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\admfiles.ini to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\adm files.ini
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\conf.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\con f.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\inetres.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\ine tres.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\system.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\sys tem.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\wmplayer.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\wmp layer.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\wuau.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\wua u.adm
Copied file C:\WINDOWS\System32\GroupPolicy\GPT.ini to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini
Copied file C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat
Copied file C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat
Entered SaveSecuritySettings
Inf path:
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\
Saving XP security settings
Saving Account Policies...
Saving Audit Policies...
Saving user rights...
Name: Administrator
Comment: Built-in account for administering the computer/domain
Full Name:
No rights.
Name: Guest
Comment: Built-in account for guest access to the computer/domain
Full Name:
Right: SeInteractiveLogonRight
Right: SeDenyInteractiveLogonRight
Right: SeDenyNetworkLogonRight
Name: HelpAssistant
Comment: Account for Providing Remote Assistance
Full Name: Remote Desktop Help Assistant Account
No rights.
Name: SUPPORT_388945a0
Comment: This is a vendor's account for the Help and Support Service
Full Name: CN=Microsoft Corporation,L=Redmond,S=Washington,C=US
Right: SeBatchLogonRight
Right: SeDenyInteractiveLogonRight
Right: SeDenyNetworkLogonRight
Name: vector
Comment: Account created by Novell's Workstation Manager
Full Name:
No rights.
Name: wintest3
Comment: Account created by Novell's Workstation Manager
Full Name:
No rights.
Name: None
Comment: Ordinary users
No rights.
Name: Administrators
Right: SeSecurityPrivilege
Right: SeBackupPrivilege
Right: SeRestorePrivilege
Right: SeSystemtimePrivilege
Right: SeShutdownPrivilege
Right: SeRemoteShutdownPrivilege
Right: SeTakeOwnershipPrivilege
Right: SeDebugPrivilege
Right: SeSystemEnvironmentPrivilege
Right: SeSystemProfilePrivilege
Right: SeProfileSingleProcessPrivilege
Right: SeIncreaseBasePriorityPrivilege
Right: SeLoadDriverPrivilege
Right: SeCreatePagefilePrivilege
Right: SeIncreaseQuotaPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeManageVolumePrivilege
Right: SeImpersonatePrivilege
Right: SeCreateGlobalPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Right: SeRemoteInteractiveLogonRight
Name: Users
Right: SeShutdownPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Guests
No rights.
Name: Power Users
Right: SeSystemtimePrivilege
Right: SeShutdownPrivilege
Right: SeProfileSingleProcessPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Account operators
No rights.
Name: System operators
No rights.
Name: Printer operators
No rights.
Name: Backup operators
Right: SeBackupPrivilege
Right: SeRestorePrivilege
Right: SeShutdownPrivilege
Right: SeChangeNotifyPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Replicators
No rights.
Name: RAS servers
No rights.
Name: Pre2000 compatible access
No rights.
Exiting SaveUserRights (0)
Saving Security Options
Found: MACHINE/Software/Microsoft/Driver Signing/Policy
Data type is 3
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Setup/RecoveryConsole/SecurityLevel
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Setup/RecoveryConsole/SetCommand
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateCDRoms
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateDASD
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateFloppies
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/CachedLogonsCount
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/ForceUnlockLogon
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/PasswordExpiryWarning
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/ScRemoveOption
Data type is 1
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/DisableCAD
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/DontDisplayLastUserName
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/LegalNoticeCaption
Data type is 1
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/LegalNoticeText
Data type is 7
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/ScForceOption
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/ShutdownWithoutLogon
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/UndockWithoutLogon
Data type is 4
Found: MACHINE/SOFTWARE/policies/Microsoft/windows
NT/DCOM/MachineAccessRestriction
Data type is 1
Found: MACHINE/SOFTWARE/policies/Microsoft/windows
NT/DCOM/MachineLaunchRestriction
Data type is 1
Found: MACHINE/System/CurrentControlSet/Control/Lsa/AuditBaseObjects
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/CrashOnAuditFail
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/DisableDomainCreds
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Control/Lsa/EveryoneIncludesAnonymous
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/FIPSAlgorithmPolicy
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/ForceGuest
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/FullPrivilegeAuditing
Data type is 3
Found: MACHINE/System/CurrentControlSet/Control/Lsa/LimitBlankPasswordUse
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/LmCompatibilityLevel
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/MSV1_0/NTLMMinClientSec
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/MSV1_0/NTLMMinServerSec
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/NoDefaultAdminOwner
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/NoLMHash
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/RestrictAnonymous
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/RestrictAnonymousSAM
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/SubmitControl
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Print/Providers/LanMan Print
Services/Servers/AddPrinterDrivers
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Control/SecurePipeServers/Winreg/AllowedPaths/Machine
Data type is 7
Found: MACHINE/System/CurrentControlSet/Control/Session
Manager/Kernel/ObCaseInsensitive
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Session Manager/Memory
Management/ClearPageFileAtShutdown
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Session
Manager/ProtectionMode
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/AutoDisconnect
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/EnableForcedLogOff
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/EnableSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/NullSessionPipes
Data type is 7
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/NullSessionShares
Data type is 7
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/RequireSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/EnablePlainTextPassword
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/EnableSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/RequireSecuritySignature
Data type is 4
Found: MACHINE/System/CurrentControlSet/Services/LDAP/LDAPClientIntegrity
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/DisablePasswordChange
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/MaximumPasswordAge
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RefusePasswordChange
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RequireSignOrSeal
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RequireStrongKey
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/SealSecureChannel
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/SignSecureChannel
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/NTDS/Parameters/LDAPServerIntegrity
Data type is 4
Administrator's user name = Administrator
Guest's user name = Guest
SaveHive entered
SaveHive exit : 0
Exiting SaveSecuritySettings 0x0
Backup path: C:\WINDOWS\System32\GroupPolicy.WMOriginal
Exiting BackupOriginalGP 0x0
Entered RestoreCachedGP.
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
No gpt.ini detected, aborting RestoreCachedGP.
Checking whether OriginalGP exists
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring original GP.
Entered RestoreOriginalGP.
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring backup GP from C:\WINDOWS\System32\GroupPolicy.WMOriginal
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.WMOriginal,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Copied C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini to
C:\WINDOWS\System32\GroupPolicy\GPT.ini
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Exiting RestoreOriginalGP 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.UserCache,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Copied C:\WINDOWS\System32\GroupPolicy.UserCache\GPT.ini to
C:\WINDOWS\System32\GroupPolicy\GPT.ini
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\User\MIC ROSOFT\IEAK\install.ins to
C:\WINDOWS\System32\GroupPolicy\User\MICROSOFT\IEA K\install.ins
Copied file C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol to
C:\WINDOWS\System32\GroupPolicy\User\Registry.pol
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS2.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS2.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS3.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS3.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Copied file C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol
to C:\WINDOWS\System32\GroupPolicy\Machine\Registry.p ol
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x3000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Entered MergeGptFile(C:\WINDOWS\System32\GroupPolicy.UserC ache, 0x80000070)
g_dwVersion: 0x0.
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x70007 in key Software\Novell\Workstation
Manager\Group Policies
Found machine extensions...
Found user extensions...
Exiting MergeGptFile 0x0
Reading user's user settings.
Entered AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol
Entered parseRegFile
Val: 'BlockExeAttachments'
Added: Software\Microsoft\Outlook Express\BlockExeAttachments
Val: 'NoHTMLWallPaper'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop\NoHTMLWallPaper
Val: '**del.NoChangingWallPaper'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop, val:
NoChangingWallPaper
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop\**del.NoChangingWallPaper
Val: 'ForceClassicControlPanel'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\ForceClassicControlPanel
Val: 'NoSMMyPictures'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMMyPictures
Val: 'NoStartMenuMyMusic'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoStartMenuMyMusic
Val: 'NoDesktopCleanupWizard'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoDesktopCleanupWizard
Val: 'NoWelcomeScreen'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoWelcomeScreen
Val: 'NoActiveDesktop'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoActiveDesktop
Val: '**del.NoInternetIcon'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoInternetIcon
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoInternetIcon
Val: '**del.NoNetHood'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val: NoNetHood
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoNetHood
Val: 'NoAutoUpdate'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoAutoUpdate
Val: 'NoSMBalloonTip'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMBalloonTip
Val: 'NoSMConfigurePrograms'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMConfigurePrograms
Val: 'NoComputersNearMe'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoComputersNearMe
Val: 'MaxRecentDocs'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\MaxRecentDocs
Val: 'NoSharedDocuments'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSharedDocuments
Val: '**del.NoStartMenuEjectPC'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoStartMenuEjectPC
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoStartMenuEjectPC
Val: 'NoActiveDesktopChanges'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoActiveDesktopChanges
Val: '**del.NoAddPrinter'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoAddPrinter
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoAddPrinter
Val: '**del.NoDeletePrinter'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoDeletePrinter
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoDeletePrinter
Val: '**del.NoToolbarsOnTaskbar'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoToolbarsOnTaskbar
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoToolbarsOnTaskbar
Val: '**del.NoSetTaskbar'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoSetTaskbar
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoSetTaskbar
Val: 'ForceStartMenuLogOff'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\ForceStartMenuLogOff
Val: '{20D04FE0-3AEA-1069-A2D8-08002B30309D}'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\{20D04FE0-3AEA-1069-A2D8-08002B30309D}
Val: '**del.{450D8FBA-AD25-11D0-98A8-0800361B1103}'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum, val:
{450D8FBA-AD25-11D0-98A8-0800361B1103}
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\**del.{450D8FBA-AD25-11D0-98A8-0800361B1103}
Val: '**del.{645FF040-5081-101B-9F08-00AA002F954E}'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum, val:
{645FF040-5081-101B-9F08-00AA002F954E}
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\**del.{645FF040-5081-101B-9F08-00AA002F954E}
Val: '**del.Wallpaper'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \System, val: Wallpaper
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\**del.Wallpaper
Val: '**del.WallpaperStyle'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \System, val:
WallpaperStyle
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\**del.WallpaperStyle
Val: 'NoDispScrSavPage'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\NoDispScrSavPage
Val: 'NoAddFromNetwork'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall\NoAddFromNetwork
Val: '**del.NoAddRemovePrograms'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall, val:
NoAddRemovePrograms
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall\**del.NoAddRemovePrograms
Val: 'ListBox_Support_Allow'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\ListBox_Support_Allow
Val: '*.fleetviewonline.com'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\Allow\*.fleetviewonline.com
Val: '*.osg.com'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\Allow\*.osg.com
Val: 'NoHelpItemTutorial'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemTutorial
Val: 'NoHelpItemNetscapeHelp'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemNetscapeHelp
Val: 'NoHelpItemSendFeedback'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemSendFeedback
Val: 'PreventAutoRun'
Added: Software\Policies\Microsoft\Messenger\Client\Preve ntAutoRun
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\Certificates\
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\CRLs\
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\CTLs\
Val: 'ScreenSaverIsSecure'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaverIsSecure
Val: 'ScreenSaveActive'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaveActive
Val: 'ScreenSaveTimeOut'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaveTimeOut
Val: 'SCRNSAVE.EXE'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\SCRNSAVE.EXE
Val: 'ListBox_Support_ZoneMapKey'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ListBox_Support_ZoneMapKey
Val: '*.osg.com'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ZoneMapKey\*.osg.com
Val: 'osgintranet'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ZoneMapKey\osgintranet
Val: '1A00'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1A00
Val: '1809'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1809
Val: '1803'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1803
Val: 'DontPromptForWindowsUpdate'
Added:
Software\Policies\Microsoft\Windows\DriverSearchin g\DontPromptForWindowsUpdate
Val: 'NC_RenameLanConnection'
Added: Software\Policies\Microsoft\Windows\Network
Connections\NC_RenameLanConnection
Val: 'PromptPasswordOnResume'
Added:
Software\Policies\Microsoft\Windows\System\Power\P romptPasswordOnResume
Val: 'NoAUAsDefaultShutdownOption'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAUAsDefaultShutdownOption
Val: 'NoAUShutdownOption'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAUShutdownOption
Val: 'BehaviorOnFailedVerify'
Added: Software\Policies\Microsoft\Windows NT\Driver
Signing\BehaviorOnFailedVerify
Val: 'MovieMaker'
Added: Software\Policies\Microsoft\WindowsMovieMaker\Movi eMaker
Exiting parseRegFile
Exiting AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol 0x0
Reading user's computer settings.
Entered AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol
Entered parseRegFile
Val: 'NoUpdateCheck'
Added: Software\Policies\Microsoft\Internet
Explorer\Infodelivery\Restrictions\NoUpdateCheck
Val: 'NoSplash'
Added: Software\Policies\Microsoft\Internet
Explorer\Infodelivery\Restrictions\NoSplash
Val: 'PreventAutoRun'
Added: Software\Policies\Microsoft\Messenger\Client\Preve ntAutoRun
Val: 'NV PrimaryDnsSuffix'
Added: Software\Policies\Microsoft\System\DNSClient\NV PrimaryDnsSuffix
Val: ''
Added: Software\Policies\Microsoft\Windows\Safer\
Val: 'WUServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ WUServer
Val: 'WUStatusServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ WUStatusServer
Val: 'NoAutoRebootWithLoggedOnUsers'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAutoRebootWithLoggedOnUsers
Val: 'AutoInstallMinorUpdates'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\AutoInstallMinorUpdates
Val: 'DetectionFrequencyEnabled'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\DetectionFrequencyEnabled
Val: 'DetectionFrequency'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\DetectionFrequency
Val: 'UseWUServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\UseWUServer
Val: 'RescheduleWaitTimeEnabled'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\RescheduleWaitTimeEnabled
Val: 'RescheduleWaitTime'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\RescheduleWaitTime
Val: 'NoAutoUpdate'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAutoUpdate
Val: 'AUOptions'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\AUOptions
Val: 'ScheduledInstallDay'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\ScheduledInstallDay
Val: 'ScheduledInstallTime'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\ScheduledInstallTime
Val: 'RegistrationOverwritesInConflict'
Added: Software\Policies\Microsoft\Windows
NT\DNSClient\RegistrationOverwritesInConflict
Val: 'SearchList'
Added: Software\Policies\Microsoft\Windows NT\DNSClient\SearchList
Val: 'PreventIISInstall'
Added: Software\Policies\Microsoft\Windows NT\IIS\PreventIISInstall
Val: 'SecurityCenterInDomain'
Added: Software\Policies\Microsoft\Windows NT\Security
Center\SecurityCenterInDomain
Exiting parseRegFile
Exiting AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol 0x0
Entered GenerateGptFile(C:\WINDOWS\System32\GroupPolicy)
g_dwVersion: 0x70007.
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x70007 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting GenerateGptFile 0x0
Exiting RestoreCachedGP 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x3000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Bumping GPT version...
Entered SetGptVersion(0x0, TRUE).
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x70007 in key Software\Novell\Workstation
Manager\Group Policies
Read file C:\WINDOWS\System32\GroupPolicy\GPT.ini
Found version 0x70007 in gpt.ini
Using version: 0x70007
Saving GPT version: 0x80008
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x80008 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting SetGptVersion 0x0.
Entered AppendSecuritySettings
Inf path: C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Restoring GP settings
Loading Account Policies...
Loading Audit Policies...
Loading user rights...
Restoring security options...
No data
No data
No data
No data
No data
No data
No data
No data
No data for Administrator account name.
LoadXPSecuritySettings returning 0
LoadHive entered
LoadHive exit : 0
Exiting AppendSecuritySettings 0x0
Signalling OS to refresh policies
RegQueryValueEx returned 2
Policies are set to apply asynchronously
Policies will be processed asynchronously
Entered SetGptVersion(0x0, TRUE).
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x80008 in key Software\Novell\Workstation
Manager\Group Policies
Read file C:\WINDOWS\System32\GroupPolicy\GPT.ini
Found version 0x80008 in gpt.ini
Using version: 0x80008
Saving GPT version: 0x90009
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x90009 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting SetGptVersion 0x0.
Entering RunGPUpdate
Exiting RunGPUpdate 0
Exiting ApplyPolicies 0x0
Writing Last Run Time High to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1c58076 to Last Run Time High in key
Software\Novell\Workstation Manager\Group Policies
Writing Last Run Time Low to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x34349ce0 to Last Run Time Low in key
Software\Novell\Workstation Manager\Group Policies
Apply user policies releasing mutex.
Exiting WMHelperInteractiveUserEntry ccode: 0x0
Closing log file.
WMHelperInitialization (Mar 4 2004) called! Flags: 0x2001. Event: 0x2000.
Impersonation: 0x1
Opened Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x11
Entering WMHelperInteractiveUserEntry!
szFullDN = CN=wintest3.OU=Users.OU=Newcastle.O=OSG
DN is Typed convert it to TYPELESS
g_szUserDN = wintest3.Users.Newcastle.OSG
GinaGetUsersSIDInTextualForm ENTERED
Textual SID : S-1-5-21-1214440339-507921405-1708537768-1019
GinaGetUsersSIDInTextualForm EXIT : 0
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Current time high: 0x1c58076
Reading Last Run Time High from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Last Run Time High: 0x1c58076 in key
Software\Novell\Workstation Manager\Group Policies
Previous time high: 0x1c58076
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Entered CheckForObsoleteWksCache
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.
Full Object DN
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.OU =Users.OU=Newcastle.O=OSG
Calling WMGetAllAssociatedObjects(FALSE, MARITIME, 1,
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.OU =Users.OU=Newcastle.O=OSG,
WINNT Workstation Package, zenwmGroupPolicy, 512, pBuffer)
WMGetAllAssociatedObject returned 2
No associated workstation policies. Deleting
C:\WINDOWS\System32\GroupPolicy.WksCache.
DeleteGPRegVal: Error 0x2 deleting Group Policy Machine Flags
Exiting CheckForObsoleteWksCache 2
Applying user policies
Reading Don't reparse from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value Don't reparse: 0x1 in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Policy applied at predesktop. Skipping reapplication at user login.
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing Last Run Time High to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1c58076 to Last Run Time High in key
Software\Novell\Workstation Manager\Group Policies
Writing Last Run Time Low to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x38844da0 to Last Run Time Low in key
Software\Novell\Workstation Manager\Group Policies
Apply user policies releasing mutex.
Exiting WMHelperInteractiveUserEntry ccode: 0x0
Closing log file.
Thanks in advance
Ali

DUPLICATE
Answered in
novell.support.zenworks.desktops.3x.workstation-manager
Regards
Rolf Lidvall
Swedish Radio (Ltd)
NSC SysOp

I currently have iPhoto on my new 27" 17, iMac. What is the best photo editing software. I have photo shop elements on my previous mac which I liked many features.

I currently have an imac 27", i7. I have iphoto on this computer. What is the best photo editing software to purchase or download?
On my previouw mac I had Photo Shop Elenemts and Photoshop CS3. Both of the later had features that I liked.
I am an amatuer family photographer; What is the best photo editing software. I do not think I need the power and confusion of full version photoshop.

I take it you are looking for replacements for the apps you used on a previous Mac?
I do not have Photoshop Elements, so I do not know about compatibility. But this site will tell you:
http://roaringapps.com
Photoshop CS3 does run in OS 10.9.1. (I use it just about everyday.) You do not have to give it up.
And there is Gimp, which is free and powerful.
http://www.gimp.org

In one website, it takes to much time to load the page, in other site its not taking time, so do i need to enable or change any settings

in one website, its taking time to load the page, on other PC its not taking any time( with internet explorer) in my PC other websites are opening quickly but this website takes too much time with firefox

Zepo wrote:
My iMac has been overwhelmed almost since I bought it new. After some digging the guiness bar suggested its my Aperture library being on the same
internal Tera byte drive as my operating system.
Having a single internal hard drive overfilled (drives slow as they fill) is very likely contributing to your problems, but IMO "my Aperture library being on the same internal Tera byte drive as my operating system" is very unlikely to be contributing to your problems. In fact the Library should stay on an underfilled (roughly, for speed, I would call ~half full "underfilled") internal drive, not on the Drobo.
Instead build a Referenced-Masters workflow with the Library and OS on an internal drive, Masters on the Drobo, OS 10.6.8 (there have been issues reported with OS 10.7 Lion). Keep Vault backup of the Library on the Drobo, and of course back up all Drobo data off site.
No matter what you do with i/o your C2D Mac is not a strong box for Aperture performance. If you want to really rock Aperture move to one of the better 2011 Sandy Bridge Macs, install 8 GB or more of RAM and build a Referenced-Masters workflow with the Library and OS on an internal solid state drive (SSD).
Personally I would prefer investing in a Thunderbolt RAID rather than in a Drobo but each individual makes his/her own network speed/cost decisions. The Drobo should work OK for referenced Masters even though i/o is limited by the Firewire connection.
Do not forget the need for off site backup. And I suggest that in the process of moving to your new setup it is most important to get the data safely and redundantly copied and generally best to disregard how long it may take.
HTH
-Allen Wicks

Links in my email are not opening in web browser. They are bringing the browser up, but not taking me to sites.

Links in my email are not opening in web browser. They are bringing the browser up, but not taking me to sites. What do I need to do?

Me too but it's happening on my iMac after I did a software update this morning which included fixes in Mail it said. My Mail was fine before the update!

Application notes, related software On Measurement of sound and its analysis

Please send me Application notes, related software On Measurement of sound and its analysis.
Also send me list of the hardware and software required for sound measurement and analysis.

The software you are looking for would be LabVIEW with the Sound and Vibration Toolkit. With that you will not only get the tools you need, but a good deal of example programs to help you along the way.
From a hardware point of view, our Dynamic Signal Analysers are perfectly suited for sound and vibrational measurements. We also have a large line of Data Acquisition devices that are also well suited for these types of measurements.
Here are some links that may help:
Products:
http://sine.ni.com/apps/we/nioc.vp?cid=1382〈=US
http://sine.ni.com/apps/we/nioc.vp?lang=US&pc=mn&cid=3122
http://sine.ni.com/apps/we/nioc.vp?cid=3472〈=US
App. Notes:
http://zone.ni.com/devzone/conceptd.nsf/webmain/CE46CCEDEBE745FA86256CC3007F9C06?opend
ocument&node=10521_US
http://zone.ni.com/devzone/conceptd.nsf/webmain/7023E833D245AD3386256D0A004D44C3?opendocument&node=10521_US
Sound and Vibration Toolkit User Manual:
http://digital.ni.com/manuals.nsf/websearch/B785E3CEABEB742486256E6D006845B8?OpenDocument&node=3122_US
I hope this helps you out.
Best Regards,
Jeremy R.
NI - Applications Engineer

Changes to php.ini not taking effect

I'm running Leopard 10.5.8 with the Apple-supplied versions of PHP (5.2.10) and Apache (2.2.11). Changes made to the /etc/php.ini file are not taking effect after stop/start of Apache. phpinfo() and shell command php -i confirm the 'status quo'. The php.ini file permissions are 444 with root/wheel ownership. It was copied from the php.ini.default file that came with the php distribution. Here's what I'm trying to change - seems pretty like this should be pretty basic stuff:
include_path = ".:/usr/local/some_directory"
// Original entry in the php.ini.default file was commented out
// The directory '/usr/local/some_directory' exists
// phpinfo() only shows include_path = .:
magicquotesgpc = Off
// Original entry in the php.ini.default value was 'On'
// phpinfo() shows magicquotesgpc = Off
I've been all over the php.net website and cannot identify my error. Shouldn't the changes to the php.ini file should be interpreted immediately after restarting Apache?
Has anyone experienced a similar problem? Suggestions for fixing this malfunction would be greatly appreciated. I know I can hard code workarounds into my PHP code but that really defeats the whole purpose of even having a php.ini file....

Was able to successfully implement these changes on a different Mac OSX 10.5.8 system. Different architecture (1st system is MBP, 2nd system is MB) although each system has all software updates installed and is up-to-date. Copied php.ini file from MB to MBP and problematic settings were corrected. Ran /developer/applications/utilities/filemerge.app to check for differences between the two php.ini files. Found one (line 305):
Failing entry: error_reporting = E_ALL
Working entry: error_reporting = E_ALL & ~E_NOTICE
I took out E_NOTICE to help with debugging as per instructions from php.net/manual/en/errorfunc.configuration.php
Go figure....

Best Organizational Chart Software for the Mac

Any suggestions for the best org chart software for the Mac?

I dunno, there aren't really any screen shots or concrete descriptions on the Evernote site, and I've never used it, but from looking at a video on their site, I'm not sure it would qualify for creating organizational charts. If Fred is looking for something that creates stuff like flow charts and the like, he may have better luck with OmniGraffle. Whether this is available on the Mac App Store, I don't know... but if not, don't bother with the Mac App Store and just download from the web site:
http://www.omnigroup.com/products/omnigraffle/

Best note taking software?

Similar Messages

Maybe you are looking for