Best Order To Install Desktop Software V4.7 With Roxio Media Creator 10

Hi,
What is the best order in which to install the Desktop software V4.7, I already have Roxio Media Creator 10 on my desktop so am unsure if its okay to install the Desktop software now or remove Media Creator 10 then install the desktop software and finally reinstall the Media Creator 10 software.
I know that the Desktop Software does contain components of version 9 so I dont want to install it over 10 if this will cause an issue.
Any ideas ?
Thanks

Hi!
There are several versions of the DTM software, including versions that leave out Media Manager and Roxio. You can obtain the version of your choice here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I have a desktop Mac OS X Leopard. I want to upgrade to Quicken 2007, Install Snow Leopard and download iLife '11. I heard that Quicken and Snow Leopard can clash and have problems. What would be the best order for installing these products. Thank You.

I have a desktop MAC OSX Leopard. I want to upgrade to Quicken 2007, install Snow Leopard, download iLife'11. I heard that Quicken and Snow Leopard can clash..........that is why I am upgrading Quicken. What would be the best order of installing these products. I have gotten defferent opinions and I want to be sure I install them correctly.
Thank You.

First, install OS X, then install your third-party software.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the
      update unless you will boot from this drive and install the update on it.
      Reconnect it and turn it back on after installation is complete and you've
      restarted.
2. You may experience unexpected results if you have installed third-party system
       software modifications, or if you have modified the operating system through
       other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
      interruption occurs during installation, use the standalone installer (see below)
      from Apple Downloads to update. While the installation is in progress do not use
      the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.
      6. Follow instructions.
After installing Snow Leopard you should update it by downloading and installing Mac OS X 10.6.8 Update Combo v1.1.

Cannot install Desktop Software

Hello,
I just bought a blackberry 9700. I cannot install desktop software on my computer!!!
I receive a “DEP – (Data Execution Prevention) error.” And then, automatically close.
I use Windows Xp.
Anyone can help me??
Thanks

Hi,
Try running the software CD first then take the CD out and reboot your computer
after reinsert the CD and restart installing again
It should work then.....

How to Install Desktop Software 6 Silently

In previous versions of Blackberry Desktop Manger, there was a file in the installation directory called 'install.txt.' In this file were parameters for the [INSTALL_OPTIONS] tag, which you could copy/paste into the setup.ini file in the install directory to customize your installation.
Desktop Software 6 does not have the 'install.ext' file, but it does have the setup.ini file. I tried adding my old [INSTALL_OPTIONS] tags to the new setup.ini file but they don't work. I ran the setup.exe file with the /? tag to see if I could get any insight on how to install silently. All this gives me is the following:
Command line parameters:
/L language ID
/S Hide initialization dialog. For silent mode use: /S /v /qn.
/V parameters to MsiExec.exe
/UA<url to InstMsiA.exe>
/UW<url to InstMsiW.exe>
/UM<url to msi package>
/US<url to lsScript.msi>
Do any of these command line parameters actually work? Nope.
I am trying to perform silent installations of Desktop Manager, which is something I had no problem doing with previous versions, but now I can no longer perform silent installations. Any help would be much appreciated. Thank you.

Ended up solving my own problem.
For those of you that want a completely silent unattended installation of desktop manager, just run the Blackberry Desktop Software.msi file with a /qn tag. Simple enough.

Can't install desktop software

Hi
I have the Palm IIIc and am trying to install the contents of the CD (desktop software) that came with my orginizer unfortunately there seems to be two problems when I start installing the contents of the CD:
1: It says in a dialog box(titleetup:Macro installation error)
"An error occured while installing one or more of the macros used by the Palm Desktop software.
Microsoft Word macro error.
Unable to write to directory; application my be running. Macro will be to the Palm Desktop directory.
Microsoft Excel macro error.
Unable to write to directory; application my be running. Macro will be to the Palm Desktop directory.
Press next to continue with installation. Or press cancel to exit Setup; then close Microsoft Word and Excel and run setup again.
Refer to readme.txt for more information."
Well, the thing is that i am positve that i am not running any of those programs.
2: When I click next after the first problem appears another dialog box(title:Component Transfer error) appears and says:
"Component: Disk<1>
File group: < Disk1>Disk1 files(1)
File: C:\Program Files\InstallSheild Installation Information\{BA0F-44C2-A883-11D1-AD0A-006097D15E2C}\
Error: Acess is denied
So what i would like to know is what to do in this situation to complete the installation.
Post relates to: Palm IIIc
Message Edited by alite on 07-15-2008 06:49 PM

What operating system are you using on your computer? Is it even a Windows machine??
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Synchronizing 8830 using previously installed Desktop Software

I have 8830 and a Curve. I have installed the Desktop Software that came with the Curve. When I tried to install the software that came with 8830, I received an error message and I can't install it. Neither am I able to sync 8830 with the current Desktop Software.
Since I need to use both the Curve and 8830, how do I go about synchronizing both devices using the same Desktop Software?
Thank you

The error message is "no applications configured for synchronization".

Installing desktop software fails

When installing desktop software version 4.7 from disc or net, the install starts - asks you which language you would like, the comes up with the wizard was interrupted before software could be installed.....
have tried various versions same result...
can someone please help as i need to remove ticketmaster app which only works in america... not much good in uk
Cheers

I'm having the exact same problem going from treo 600 verizon to centro att and windows vista. the first install failed just like the above user, redid it and received no option to import data. Tried the suggested reinstall from the downloaded version and got the import option this time, but nothing shows up on the desktop, no old data, nothing.
I notice in the data folders on my computer that the old file type are there, as well as the new types, with considerably smaller sizes, no doubt because there's no data in them. Looks like the new desktop is simply saving the old files, but did not actually convert them.
I can't believe more people don't have this problem. I found one other similar post from a 650 user. someone suggested synching the old treo with the new desktop. i tried that too, but still no data appears (no error message either).
Any help would be appreciated.
Post relates to: Centro (AT&T)

Desktop Software and syncing with Outlook 2010

When will we see the upgrade to Desktop Software that syncs with Outlook 2010?

RIM has stated in August.
http://www.blackberry.com/btsc/KB20654
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

"The BlackBerry Desktop Software cannot connect with this device." after repair

I download the Desktop Software for BlackBerry onto my Mac Book Pro for the first time.
After installing I connected my PlayBook. I get the message "The BlackBerry® Desktop Software cannot connect with this device."
The program suggested I repair the device software, so I did. After that I set it up and ran the updates.
When I plug it back in I get the exact same message.
What should I do next?
co-founder of Diaree | BB Dev for PictureThis

I also cannot connect to my two playbooks using desktop manager on mac.
One of the two playbooks is now shipped back to rim for repair (see here http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/5MP-Playbook-Camera-Blackscreen-Errors-Ha... The issue of desktop manager not being able to connect to the playbook started with this playbook when the repair I was prompted to to stopped 1/4 way into it. Multiple retries did not make any difference.
Since then, I have tried connecting my other (functioning) playbook to the same mac but when I plug in usb cable I get the same "cannot connect" errmsg and prompted to "repair". I am definitely NOT going to "repair" this one. So I uninstalled the desktop manager and reinstalled it to see if it makes a difference. Unfortunately it did not and I get the same "cannot connect" errmsg.
If anyone has any suggestion how this issue can be resolved that would be great. I think something is stuck on the mac and is not getting wiped out when desktop manager is uninstalled. Thanks.

Blackberry Desktop Software only synchronizes with folder Outlook in Microsoft Outlook

Blackberry Desktop Software only synchronizes with folder Outlook in Microsoft Outlook. But, folders (.PST files) may be renamed and there may be multiple such folders open in Outlook at any time. I have six, none of which is named Outlook. Two of those are archival and four are associated and named for email addresses.The Desktop software should list the pst files checkboxes to indicate whether synchronization should be performed with them.

Well I believe I have figured out the answer to my own question, I ended up having to do a repair installation for Office 2010 and I was able to sync from outlook to the Blackberry.

Can't install Desktop Software properly with out Error 1406

Hello All,
I am running Win 7. Just can't seem to get the desktop software installed witout the Error 1406 coming up. I have tried doing a clean uninstall a few times but still can't get done.
I have no trouble with getting it done in XP on my other compters!
Here's the full Error messege;
Could not write value discription to key \Software\MozillaPlugins\@Rim.com/webSLLauncher,
version =1.0. Verify that you have sufficient access to that key or contact your support personnel.
Solved!
Go to Solution.

Hi there!
I agree...a full start over is in order. And, for your easier reference, here is the procedure that I give out.
I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
Some have reported that there are more registry keys to remove than are discussed in that KB
Others have reported the use of a registry cleansing tool to also be helpful
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchronizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cannot restart iMac after installing desktop software

Hello.
I installed Mac Desktop software into my iMac (intel), and restarted it.
As you know, you see gray Apple logo with white background, however, the usual desktop never comes up.
How should I do?
If someone has any solution, please let me know!!
Thank you in advance.

Hello cmaisano,
Welcome to the BlackBerry Support Community Forums.
It sounds like the BlackBerry Desktop Manager updated the software on the BlackBerry smartphone.
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Error installing Desktop software on Windows XP Profesional

Hi,
I got an error when trying to install Blackberry Desktop Software 6.0 on my Laptop. The message said that the application was not a valid Win32 application.
Is there any solution to the problem?
Please help.
Regards
Sarel

Hi and welcome to the forums!
Without knowing the following information It is impossible to give you any meaningful advice.
We need:
1) What model PC and what OS (specify 32 or 64 bit and service pack rev. )
2) What version of Blackberry desktop manager is installed.
I have attached some links to help you find and provide this information.
Let us know how it goes!
Thanks,
Bifocals
How to perform a clean uninstall of the BlackBerry Desktop Software
Downloading the most recent versions of BlackBerry Device Software and BlackBerry Desktop Manager
How to install desktop manager 6.0 (video attached)
How to find the installation log files for BlackBerry Desktop Software
How to troubleshoot problems that may occur when you install, uninstall, or upgrade a program on a W...
How to turn on BlackBerry Desktop Manager connection logging
User Guide - BlackBerry Desktop Software
6.0.0
HTML PDF
Release Notes - BlackBerry Desktop Software
6.0.0
PDF
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Trouble Installing Desktop Software

When I run the installation software I get a Windows Installer Window with just an OK button. The content of the window is below. When I hit the OK Button, the installation stops and exits. Any help will be greatly appreciated.
Thanks!
Window content:
Windows ® Installer. V 3.01.4000.1823
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.
Solved!
Go to Solution.

Windows ® Installer. V 5.0.7601.17514
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.
I cant install the BlackBerry Desktop Software.
This error come out.
I've rename it to .zip and use BlackBerrry Desktop Software.msi
But still failed. Please help meeeee

Installing desktop software for tour 9630

Hello everybody.I am a new BB client.I got the Tour yesterday and while trying to install the software to my computer the proccess stoped quickly after starting displaying "unale to download microsoft NET framework 2.0 SP 1-the .exe file".The other file needed to download, MSXML 6,0,was downloaded successfully.Any ideas?I appreciate it.

Hi and Welcome to the Community!
From what you describe, your internet connection is the culprit. Until the download completes (all parts, not just some of the parts as you have now), you cannot run the exe file and install the software. I find it a little odd that the CD forces a download, but the carriers actually are responsible for that distribution when they sell to their end users. In any event, internet connectivity is important so that updates and such can be accomplished as they are released.
Just to be sure, are you downloading from here?
http://us.blackberry.com/apps-software/desktop/?lid=us:bboftwareesktopSoftware&lpos=us:bboftware
From there, you can get either the PC or MAC version of the Desktop Software.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Best Order To Install Desktop Software V4.7 With Roxio Media Creator 10

Similar Messages

Maybe you are looking for