?Best OS X version for Power Mac Cube G4-I want to reformat and start again in the hope it will work faster.

Hi. I want to reformat and start again in the hope my G4 PowerMac Cube will work faster. So I'd like to know what the best version of Mac OS X is for the G4. Can anyone advise?  Many thanks.

Hi, the best for speed is the lowest OSX it'll run & still do what you need.
10.1.5 would run in 96MB of RAM, 10.2.x took twice as much, 10.3.x twice again, 10.4.x twice again, 10.5.x thrice again & better Video caards.
And those are minimums, twice that being fairly useful, 4 times that being pretty good.
I suspect 10.4.11 is going to be your "Sweet Spot", I wouldn't run 10.4 on PPC Macs with less than 1.5 GB of RAM, not on IntelMacs with less than 3-4GB of RAM.
OSX is very dependent on it's spped & usability by the speed & amount of free space on the HD.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1

Similar Messages

  • HT1848 How do i get the playlists from my iphone onto the itunes on my mac without deleting everything on my phone and starting again?

    How do I get the playlists on my iphone onto the itunes on my mac without deleting everything on my phone and starting again?

    Hi,
    Read this user tip Recover your iTunes library from your iPod or iOS device
    Does it help?
    Jim

  • Best free antivirus online for Power Mac G5?

    I was just notified that there is a virus on my flash drive (DLACTRLW.EXE virus) and I was told to download AVG from cnet.com for free.  I don't think this works for macs, so I was hoping someone could tell me what might be the best for my Power Mac G5.
    Thanks for your help!

    my advice is simply be careful. Dont open suspicious emails, etc.
    Also , learn how viruses work. For example, all files have a 3-letter extension.  On windows machines, a program capable of running ( and thus of doing harm) has the extension ".exe" So you can spot a potential virus by its extension. note that some viruses some in with a different extension and then change their namesop they will run.
    Unless you are running windows on your mac, a ".exe" program cannto run. It is a windows program. So you are safe.
    I find most anti-virus programs to be nearly as bad as the virus themselves.  I hoep 'clean living" can keep me virus free.
    Grant

  • I tried to activate creative cloud and it wouldn't let me without uninstalling earlier version. It wouldn't allow me to uninstall. I want to uninstall and start again with a new serial number I received at workshop and no longer want to be paying the mont

    How can I cancel my payments?

    Cancel your membership or subscription | Creative Cloud
    https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  • What is the best soft wear update for a mac desktop with   System Version:     Mac OS X 10.5.8

    What is the best soft wear update for a mac desktop with   System Version:
    Mac OS X 10.5.8

    It will depend on the actual model you have.
    Upgrade Paths to Snow Leopard, Lion, Mountain Lion, or Mavericks
    You can upgrade to Mountain Lion or Mavericks from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99 while Mavericks is free. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion or Mavericks
    To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.

  • 168 Pin RAm for Power Mac

    Does anyone know if MT8LD864AG-6 168 pin DIMM is compatible with the RAM for Power Mac 8500 120MHz and Power MAc 7200 120 MHz?
    Thank you in advance for your advice.
    Robert

    Hi Robert,
    The ZIF processor upgrade I have in my Beige G3 MT (300 mHz originally) is a Sonnet G3/500--I wish it were a G4! I installed it when I still had OS9. It stayed in place when I installed Jaguar and, later, Panther.
    As Grant mentions, I used a third-party helper program called XPostFacto, "XPF" for short. Installing "unsupported" Panther with XPF was far easier than installing the "supported" Jaguar and the computer is now more stable.
    T'was Grant who talked me into trying Panther. Now I can't believe I waited so long! I used an older version of XPF, version 3.1, at Grant's suggestion. V3.1 seems to be the "sweet spot" for installing Panther. Some Beige G3 owners have successfully installed 10.4.x with later version of XPF but more users have reported stability issues than with 10.3.
    If you are interested in learning more about the upgrade paths available to the Beige G3, there is a very active forum area here:
    http://discussions.apple.com/category.jspa?categoryID=110
    Hope this helps!
    A

  • DVI to s-video adpater for Power Mac G4?

    I'm attempting to view digitial photos on my Power Mac G4 on an HDTV with an s-video connection. I've tried Apple's "DVI to video adapter" for the Power Mac G5, but it doesn't work, even after clicking "Detect Displays".
    Is there a DVI to s-video adapater from Apple or anybody else that will work with the Power Mac G4? If not, are there any other options?

    The Apple DVI to Video converter only works with certain graphics cards. The card has to be able to generate interlaced video at the correct scan rate, and modulate the color onto a carrier signal. For other card you would need a scan converter like:
    <http://www.audiovisualdevices.com.au/viewprod.php?catid=&productid=CPT380>
    This device has a VGA input, so you might need a DVI to VGA adapter. There may be other devices available with DVI input.

  • When i try to update software for my 3rd Gen iPod Touch to version 5 i get the message 'This version of iTunes (9.2.1) is the current version'. My Mac OS is 10.4.11. How can I update the iPod software?

    When i try to update the software for my 3rd Gen iPod Touch to version 5 i get the message 'This version of iTunes (9.2.1) is the current version'. My Mac OS is 10.4.11. How can I update the iPod software?

    The later iOSs requires at least OSX 10.5.8 for the Mac.  You need iTunes 10.5 but 10.4.11 only goes to 9.x.. 10.5.8 is a paid upgrade.
    Are you sure that you have a 3G iPod?  If it is 8 or 16 GB it is a 2G and those can only go to 4.2.1 (also requires 10.5.8 or later). A 32 GB can be either  2G or 3G. To identify yours:
    Apple - Support - Check Your Service and Support Coverage
    Identifying iPod models

  • Batteries for Power Mac G3 Beige Minitower

    Where can I get batteries for Power Mac G3 Beige Minitower? I think they're Lithium batteries 3.6V 200W 922-4542.

    m i g,
    Here is a source for $4.99:
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
    Jim
    Note to others: (direct quote from above link)
    This battery is an exact replacement for the below listed models.
    Macintosh II series computers
    Macintosh SE FDHD
    Macintosh Classic (4-chip and 2-chip)
    Macintosh SE/30, IIx, IIcx, IIci, IIfx, IIsi series computers
    Macintosh IIvi, IIvx, Performa 600 series computers
    Macintosh LC, LC II, LC III, Performa 400 series computers
    Macintosh Quadra 605, LC 475, Performa 475, 477 series computers
    Macintosh LC 520, LC 550, Performa 550 series computers
    Macintosh Classic II, Color Classic, Performa 200 series computers
    Macintosh Centris 610, 650, 660AV series computers
    Macintosh Quadra 610, 660AV, 650, 700, 800, 840AV, 900, 950 series computers
    Power Macintosh 6100, 7100, 8100 series computers, and Performa 6100 series computers
    Power Macintosh 7200, 7300, 7500, 7600, 8500, 8600, 9500, and 9600 series computers.
    Power Macintosh G3 - all models, entire series
    iMac - all models, entire series
    Power Mac G4 - all models, entire series
    Power Mac G5 - all models, entire series

  • Can I use my new iMac 20" as a monitor for for Power Mac G5?

    Actually I want to buy the new iMac 20" computer with the intel and then randomly use the iMac as a monitor display for my Power Mac G5 when I am editing video and then unhook it and use the Imac as a stand alone when I'm not editing video with my Power Mac. Will this work please. Thank You

    Hello, 
    It's not possible to use either the iMac (Flat Panel) (G4) or the new Intel iMacs as displays. The only options would be:
    VNC set-up. It's fairly low speed of refresh would probably make this undesirable for your situation: Screen Recycler (link)
    A video-in device. A device like Elgato's EyeTV Hybrid (link) would not be of sufficiently high resolution to be any use for video editing.
    regards
    mrtotes

  • Latest DVD Burner Firmware for Power Mac G5?

    I'm trying to find the latest firmware for the DVD burner that shipped with my Power Mac G5, where I can find it and how to install it.
    My machine ID:
    Model Name:          Power Mac G5
      Model Identifier:          PowerMac11,2
      Processor Name:          PowerPC G5 (1.1)
      Processor Speed:          2.3 GHz
      Number Of CPUs:          2
    The Burner ID:
    PIONEER DVD-RW  DVR-110D:
    Firmware Revision:          AA06
      Interconnect:          ATAPI
      Burn Support:          Yes (Apple Shipping Drive)

    Hi Thomas, check out...
    http://lasvegas.rpc1.org/

  • Need new low-end graphics card for Power Mac G5 (PowerPC 970)

    My Power Mac G5 (PowerPC 970) has recently died I believe due to a bad
    ATI RADEON X800 XT MAC EDITION video card.
    Reason for thinking its the card, is that the machine was performing its intended tasks for several days even though the monitor was snow.
    Having trouble determining a low-end replacement. (I no longer need the enhanced features of the RADEON X800 for this machine.
    Much appreciated if someone could suggest a product appropriate for PowerPC 970.
    Thanks!

    I also ran into this issue with my dual G5. When I bought it, I didn't get wireless because it was a dedicated desktop on the network, but I'm upgrading and giving it to the kids to use in a room without wired network. Now that wireless would be really nice and it looks like the official solution is:
    "Apple Wireless Upgrade Kit for Power Mac G5 Dual or Power Mac G5 Quad MA252G/A"
    which is really expensive and difficult to install. But the weird thing is that I do have bluetooth. I wonder if there's just some little doodad I need to connect to get wireless going too, but I can't find any info on the card, and it looks like it's buried on the motherboard behind all the cooling stuff. I'll probably just spring for one of the USB solutions.

  • What is the best external BluRay reader for a Mac?

    What is the best external BluRay reader for a Mac which is around $100?
    --  MacBook Pro Late 2011
    Thank you!

    There are many that will work just fine. I've been very happy with the units from Other World Computing:
    http://eshop.macsales.com/shop/firewire/
    but there are other brands and vendors that are also quite good. If your MacBook has a Firewire port, a Firewire-equipped drive will give you the best performance.

  • What is the best portable hard drive for my mac

    What is the best portable hard drive for my mac?

    A lot depends on the size you want...physical size, I mean...see what they have at OWC, http://www.macsales.com I have thee of there drives and they are great...compatible and already formatted out-of-the-box.  But it is still better to format and partition yourself to set them up your way.

  • HT4088 I paid $20 for keynote for my MAC mini. I made a presentation and now I want to send it to my iPad. Do I have to buy an iPad version of Keynote to be able to play the presentation on the iPad.

    I paid $20 for Keynote for my MAC mini. I made a presentation and now I want to send it to my iPad. Do I have to buy an iPad version of Keynote to be able to play the presentation on the iPad.

    evelyn fromfrankland river wrote:
    ... have to buy an iPad version of Keynote to be able to play the presentation on the iPad.
    Yes...

Maybe you are looking for

  • Database table 'e' is not accessible

    Hi all, like many others in the web I'm having problems deploying CMP Beans on BEA. I'm using Weblogic 8.1 and get the following error message: "[EJB:011076]Unable to deploy the EJB 'B' because the database table 'b' is not accessible. Please ensure

  • Powerbook and external S-Video problem

    Hello, After installing Leopard recently and after upgrading to 10.5.2 my S-Video has started acting strange. The problem is when i hook up my tv to it and press detect display my primary screen goes black on the powerbook. When pressing F7 and switc

  • Zen Micro Music Download Conundrum - Really Frustrated Help Nee

    <SPAN class=posttext>Man am I frustrated - really frustrated. Here is my conundrum: I have a Zen Micro. I want to purchase music online. It is a frikin' maze of problem solving. I download from iTunes, they have some sort of proprietary format that m

  • BI Publisher not closing connection pool connections?

    Hi: I'm using Oracle WLS 10.3.3, BIP 10.1.3.4.1. I have reports that were using JDBC data sources defined in BIP and I can run them all day with no problems. I created a JDBC connection pool in the WLS, created a JNDI name for it and then got BIP to

  • Design Patterns: 'Program to an interface, not an impl.' and Factory Method

    Design Patterns: 'Program to an interface, not an implementation' and Factory Method. Hi All, I've 4 questions. And 1M thanks for your precious input. 1. OOAD steps: Requirement-->Use Cases-->Analysis Classes-->Sequence Diagrams-->CRC-->other UML dia