BEST PERFORMANCE SIS AGP DRIVER

Which one do you guys think performs the best??
I'm guessing 1.09F cause i tried 1.09M and 1.09F gave me a higher score in 3dmark.
How about 1.08d?

I downloaded the 110's and went from 89xx to 93xx (can't remember exact numbers). I was using 109f.
MSI 645 ULTRA w/BIOS 1.6 from old forum
P4 1.8A
2x 256mb Corsair XMS pc2700
Tekram ultra160 dc390-u3w
IBM 36Z15 18.1 GB 15,000 RPM
SB LIVE!
MSI GeForce4 Ti4400

Similar Messages

Can't update my AGP driver MSI 648 Max-L

Hello, I have the MSI 648 Max-L (SiS 648 motherboard).
When I try to update the SiS AGP driver from 1.13 to anything newer (the latest is 1.16a), nothing happens. The installer fails to run.
What seems to be wrong?
Specs:
WinXP SP1
MSI 648
512MB PC2700
Radeon 9700Pro
Thanks in advance!

Quote
Originally posted by zardoz66
Hello, I have the MSI 648 Max-L (SiS 648 motherboard).
When I try to update the SiS AGP driver from 1.13 to anything newer (the latest is 1.16a), nothing happens. The installer fails to run.
What seems to be wrong?
Specs:
WinXP SP1
MSI 648
512MB PC2700
Radeon 9700Pro
Thanks in advance!
I'm having the same problem while trying to istall SiS AGP driver 1.15 but i have no previous versions installed though.

MSI 648F NEO SiS AGP trouble/wont detect nvidia FX5200

Hi!
I recently did an emergency build using the 648F Neo (my old syntax board died). Everything went well, but when I went online I noticed my graphics were very choppy. I checked my Display settings and noticed that my nvidia fx5200 wasn't even being recognized!
I went to the Device Manager, and saw that the 5200 wasnt listed their, either. However, I did notice that under "System Devices" there was a listing for "SiS Accelerated Graphics Port", and this listing had the yellow-dot-with-an-exclamation-point warning attached to it. However, when I right clicked on it, and checked the driver, it listed the driver as "5.1.2600.2180" , with a driver date of "12/9/2004". I used the driver off the Cd, and off the MSI website, but with no different result.
The device manager also provides me with this info: "This device cannot start. (Code 10)".
When I try to download the nvidia driver, it informs that it could not detect any drivers that are compatible with my current hardware.
Any suggestions?

Here's where we stand:
I got rid of of the drivers i had installed, both AGP and Nvidia.
I started in safe mode, and reinstalled SiS AGP driver ver. 1.21
I then tried to install the nivida drivers.
Same result: "could not find drivers compatible with hardware" etc.,
My device driver screen shows that the Sis Accelerated Graphics Port fails to start ANYTIME I have 1.21 loaded up. Should I try an older version? Even if i dont try to install the nvidia drivers, I still get the exclamation point warning that the SiS AGP failed to start.

Optimizing system for best performance/stability and a custom kernel

I have ArchLinux running on a MacBook 4.1 (early 2008), and it's running very well so far. But I would like to optimize it for best performance and stability (but not at the cost of losing 'graphical interface' quality). I want to compile a custom kernel, and I actually did once, but didn't do it well (and removed it), so I need some help from experts to tell me what should I disable or enable when compiling a custom kernel.
I will post dmesg and lspci (and rc.conf) here, but if you need any other information, please tell me.
Thanks.
Dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.4-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd31000 (usable)
[ 0.000000] BIOS-e820: 000000007dd31000 - 000000007df32000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007df32000 - 000000007dfe5000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007dfe5000 - 000000007dfe7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007dfe7000 - 000000007eec3000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eec8000 - 000000007eecb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eecb000 - 000000007eecc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eecc000 - 000000007eedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved)
[ 0.000000] BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBook4,1/Mac-F22788A9, BIOS MB41.88Z.00C1.B00.0802091535 02/09/08
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7dd31 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 07F000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07EF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007dd31000
[ 0.000000] 0000000000 - 007dc00000 page 2M
[ 0.000000] 007dc00000 - 007dd31000 page 4k
[ 0.000000] kernel direct mapping tables up to 7dd31000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 37492000 - 37a41000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 000000007eeee1c0 00084 (v01 APPLE Apple00 000000C1 01000013)
[ 0.000000] ACPI: FACP 000000007eeec000 000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F)
[ 0.000000] ACPI: DSDT 000000007eee1000 045C6 (v01 APPLE MacBook 00040001 INTL 20061109)
[ 0.000000] ACPI: FACS 000000007eecc000 00040
[ 0.000000] ACPI: HPET 000000007eeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 000000007eeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 000000007eee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 000000007eee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 000000007eee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 000000007eee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 000000007eec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eec6000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eec5000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007dd31000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007dd31000
[ 0.000000] NODE_DATA [000000007dd2d000 - 000000007dd30fff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007b400000-ffff88007d3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007dd31
[ 0.000000] On node 0 totalpages: 515264
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7989 pages used for memmap
[ 0.000000] DMA32 zone: 503292 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007da00000 s82880 r8192 d23616 u1048576
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 507206
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2011044k/2061508k available (4538k kernel code, 452k absent, 50012k reserved, 4308k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 2 loops
[ 0.000000] Detected 2393.995 MHz processor.
[ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.48 BogoMIPS (lpj=7979983)
[ 0.010013] pid_max: default: 32768 minimum: 301
[ 0.010061] Security Framework initialized
[ 0.010069] AppArmor: AppArmor disabled by boot time parameter
[ 0.010381] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011643] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.012201] Mount-cache hash table entries: 256
[ 0.012567] Initializing cgroup subsys cpuacct
[ 0.012573] Initializing cgroup subsys memory
[ 0.012588] Initializing cgroup subsys devices
[ 0.012592] Initializing cgroup subsys freezer
[ 0.012595] Initializing cgroup subsys net_cls
[ 0.012599] Initializing cgroup subsys blkio
[ 0.012653] CPU: Physical Processor ID: 0
[ 0.012656] CPU: Processor Core ID: 0
[ 0.012660] mce: CPU supports 6 MCE banks
[ 0.012673] CPU0: Thermal monitoring enabled (TM2)
[ 0.012679] using mwait in idle threads.
[ 0.015816] ACPI: Core revision 20120320
[ 0.021231] ftrace: allocating 17820 entries in 70 pages
[ 0.030546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064790] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
[ 0.066663] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.066663] ... version: 2
[ 0.066663] ... bit width: 40
[ 0.066663] ... generic registers: 2
[ 0.066663] ... value mask: 000000ffffffffff
[ 0.066663] ... max period: 000000007fffffff
[ 0.066663] ... fixed-purpose events: 3
[ 0.066663] ... event mask: 0000000700000003
[ 0.083458] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.103350] Booting Node 0, Processors #1 Ok.
[ 0.116508] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.116575] Brought up 2 CPUs
[ 0.116579] Total of 2 processors activated (9579.97 BogoMIPS).
[ 0.120053] devtmpfs: initialized
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7dd31000-0x7df31fff] (2101248 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7dfe5000-0x7dfe6fff] (8192 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec3000-0x7eec4fff] (8192 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec8000-0x7eecafff] (12288 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7eecc000-0x7eedefff] (77824 bytes)
[ 0.123629] NET: Registered protocol family 16
[ 0.123872] ACPI: bus type pci registered
[ 0.123988] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.123995] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[ 0.124001] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.153700] PCI: Using configuration type 1 for base access
[ 0.153895] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.153899] mtrr: probably your BIOS does not setup all CPUs.
[ 0.153901] mtrr: corrected configuration.
[ 0.154568] bio: create slab <bio-0> at 0
[ 0.154568] ACPI: Added _OSI(Module Device)
[ 0.154568] ACPI: Added _OSI(Processor Device)
[ 0.154568] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.154568] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.154919] ACPI: EC: EC description table is found, configuring boot EC
[ 0.159179] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.160245] ACPI: SSDT 000000007eecaa98 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.160625] ACPI: Dynamic OEM Table Load:
[ 0.160630] ACPI: SSDT (null) 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.160795] ACPI: SSDT 000000007eec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.161153] ACPI: Dynamic OEM Table Load:
[ 0.161158] ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.161186] ACPI: SSDT 000000007eec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.161186] ACPI: Dynamic OEM Table Load:
[ 0.161186] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.161186] ACPI: SSDT 000000007eec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.161187] ACPI: Dynamic OEM Table Load:
[ 0.161192] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.161220] ACPI: Interpreter enabled
[ 0.161220] ACPI: (supports S0 S3 S4 S5)
[ 0.161220] ACPI: Using IOAPIC for interrupt routing
[ 0.173742] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.173981] ACPI: No dock devices found.
[ 0.173988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.174581] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.175426] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.175431] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.175436] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.175443] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.175505] PCI host bridge to bus 0000:00
[ 0.175510] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.175514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.175518] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.175523] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.175539] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.175610] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[ 0.175631] pci 0000:00:02.0: reg 10: [mem 0x90100000-0x901fffff 64bit]
[ 0.175645] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.175655] pci 0000:00:02.0: reg 20: [io 0x6110-0x6117]
[ 0.175712] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[ 0.175730] pci 0000:00:02.1: reg 10: [mem 0x90200000-0x902fffff 64bit]
[ 0.175849] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.175917] pci 0000:00:1a.0: reg 20: [io 0x60c0-0x60df]
[ 0.175971] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.176038] pci 0000:00:1a.1: reg 20: [io 0x60a0-0x60bf]
[ 0.176110] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.176140] pci 0000:00:1a.7: reg 10: [mem 0x90704c00-0x90704fff]
[ 0.176140] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.176140] pci 0000:00:1b.0: reg 10: [mem 0x90700000-0x90703fff 64bit]
[ 0.176140] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.176140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.176140] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[ 0.176140] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.176140] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
[ 0.176140] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.176140] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
[ 0.176140] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.176140] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
[ 0.176140] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.176140] pci 0000:00:1d.7: reg 10: [mem 0x90704800-0x90704bff]
[ 0.176140] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.176140] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[ 0.176140] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018f
[ 0.176140] pci 0000:00:1f.1: reg 10: [io 0x6108-0x610f]
[ 0.176140] pci 0000:00:1f.1: reg 14: [io 0x6124-0x6127]
[ 0.176140] pci 0000:00:1f.1: reg 18: [io 0x6100-0x6107]
[ 0.176140] pci 0000:00:1f.1: reg 1c: [io 0x6120-0x6123]
[ 0.176140] pci 0000:00:1f.1: reg 20: [io 0x60e0-0x60ef]
[ 0.176140] pci 0000:00:1f.2: [8086:2828] type 00 class 0x01018f
[ 0.176140] pci 0000:00:1f.2: reg 10: [io 0x60f8-0x60ff]
[ 0.176140] pci 0000:00:1f.2: reg 14: [io 0x611c-0x611f]
[ 0.176140] pci 0000:00:1f.2: reg 18: [io 0x60f0-0x60f7]
[ 0.176140] pci 0000:00:1f.2: reg 1c: [io 0x6118-0x611b]
[ 0.176140] pci 0000:00:1f.2: reg 20: [io 0x6020-0x602f]
[ 0.176140] pci 0000:00:1f.2: reg 24: [io 0x4000-0x400f]
[ 0.176140] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.176140] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.176140] pci 0000:00:1f.3: reg 10: [mem 0x90705000-0x907050ff]
[ 0.176140] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.176140] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.176140] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
[ 0.176140] pci 0000:02:00.0: [14e4:4328] type 00 class 0x028000
[ 0.176140] pci 0000:02:00.0: reg 10: [mem 0x90500000-0x90503fff 64bit]
[ 0.176140] pci 0000:02:00.0: reg 18: [mem 0x90000000-0x900fffff 64bit pref]
[ 0.176140] pci 0000:02:00.0: supports D1 D2
[ 0.176140] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.183347] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.183358] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
[ 0.183369] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
[ 0.183595] pci 0000:03:00.0: [11ab:436a] type 00 class 0x020000
[ 0.183741] pci 0000:03:00.0: reg 10: [mem 0x90400000-0x90403fff 64bit]
[ 0.183826] pci 0000:03:00.0: reg 18: [io 0x5000-0x50ff]
[ 0.184121] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.184581] pci 0000:03:00.0: supports D1 D2
[ 0.184585] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184821] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.184828] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.184836] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
[ 0.184905] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010
[ 0.184934] pci 0000:04:03.0: reg 10: [mem 0x90300000-0x90300fff]
[ 0.185056] pci 0000:04:03.0: supports D1 D2
[ 0.185060] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.185137] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.185148] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
[ 0.185160] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.185165] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.185169] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.185174] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.185211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.185419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.185489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.185588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.185829] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.186233] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.193405] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.193487] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.193565] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.193642] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.193720] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.193797] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
[ 0.193874] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.193957] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.196686] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.196707] vgaarb: loaded
[ 0.196709] vgaarb: bridge control possible 0000:00:02.0
[ 0.196788] PCI: Using ACPI for IRQ routing
[ 0.197237] PCI: pci_cache_line_size set to 64 bytes
[ 0.197407] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.197411] reserve RAM buffer: 000000007dd31000 - 000000007fffffff
[ 0.197573] NetLabel: Initializing
[ 0.197576] NetLabel: domain hash size = 128
[ 0.197579] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.197601] NetLabel: unlabeled traffic allowed by default
[ 0.197632] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.197640] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.197648] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.210013] Switching to clocksource hpet
[ 0.222129] pnp: PnP ACPI init
[ 0.222158] ACPI: bus type pnp registered
[ 0.222675] pnp 00:00: [bus 00-ff]
[ 0.222680] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.222684] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.222688] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.222692] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.222696] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.222700] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.222703] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.222707] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.222711] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.222715] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.222718] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.222723] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.222726] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.222735] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.222739] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.222743] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.222746] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.222750] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.222859] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.222989] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.222993] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.222996] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.223000] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.223003] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[ 0.223006] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.223010] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.223109] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.223115] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.223119] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.223124] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.223129] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.223134] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.223138] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.223145] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.223455] pnp 00:02: [io 0x0300-0x031f]
[ 0.223473] pnp 00:02: [irq 6]
[ 0.223541] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.223606] pnp 00:03: [io 0x0000-0x001f]
[ 0.223610] pnp 00:03: [io 0x0081-0x0091]
[ 0.223614] pnp 00:03: [io 0x0093-0x009f]
[ 0.223617] pnp 00:03: [io 0x00c0-0x00df]
[ 0.223621] pnp 00:03: [dma 4]
[ 0.223695] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.223710] pnp 00:04: [mem 0xff000000-0xffffffff]
[ 0.223778] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.223883] pnp 00:05: [irq 0 disabled]
[ 0.223893] pnp 00:05: [irq 8]
[ 0.223897] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.224002] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.224009] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.224028] pnp 00:06: [io 0x00f0]
[ 0.224038] pnp 00:06: [irq 13]
[ 0.224112] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.224132] pnp 00:07: [io 0x002e-0x002f]
[ 0.224136] pnp 00:07: [io 0x004e-0x004f]
[ 0.224139] pnp 00:07: [io 0x0061]
[ 0.224142] pnp 00:07: [io 0x0063]
[ 0.224145] pnp 00:07: [io 0x0065]
[ 0.224149] pnp 00:07: [io 0x0067]
[ 0.224151] pnp 00:07: [io 0x0070]
[ 0.224154] pnp 00:07: [io 0x0080]
[ 0.224157] pnp 00:07: [io 0x0092]
[ 0.224161] pnp 00:07: [io 0x00b2-0x00b3]
[ 0.224164] pnp 00:07: [io 0x0680-0x069f]
[ 0.224167] pnp 00:07: [io 0x0800-0x080f]
[ 0.224170] pnp 00:07: [io 0x0810-0x0817]
[ 0.224173] pnp 00:07: [io 0x0400-0x047f]
[ 0.224177] pnp 00:07: [io 0x0500-0x053f]
[ 0.224180] pnp 00:07: [io 0x1640-0x164f]
[ 0.224302] system 00:07: [io 0x0680-0x069f] has been reserved
[ 0.224307] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.224312] system 00:07: [io 0x0810-0x0817] has been reserved
[ 0.224316] system 00:07: [io 0x0400-0x047f] has been reserved
[ 0.224320] system 00:07: [io 0x0500-0x053f] has been reserved
[ 0.224325] system 00:07: [io 0x1640-0x164f] has been reserved
[ 0.224331] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.224346] pnp 00:08: [io 0x0070-0x0077]
[ 0.224417] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.228737] pnp: PnP ACPI: found 9 devices
[ 0.228741] ACPI: ACPI bus type pnp unregistered
[ 0.237540] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.237582] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-01] add_size 1000
[ 0.237590] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
[ 0.237607] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.237623] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03-03] add_size 200000
[ 0.237646] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.237652] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.237657] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.237662] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.237672] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90800000-0x909fffff 64bit pref]
[ 0.237678] pci 0000:00:1c.5: BAR 15: assigned [mem 0x90a00000-0x90cfffff pref]
[ 0.237684] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.237689] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.237694] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.237701] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.237710] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
[ 0.237718] pci 0000:00:1c.0: bridge window [mem 0x90800000-0x909fffff 64bit pref]
[ 0.237730] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.237736] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.237746] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
[ 0.237754] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
[ 0.237767] pci 0000:03:00.0: BAR 6: assigned [mem 0x90a00000-0x90a1ffff pref]
[ 0.237772] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.237777] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.237787] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
[ 0.237795] pci 0000:00:1c.5: bridge window [mem 0x90a00000-0x90cfffff pref]
[ 0.237807] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.237816] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
[ 0.237837] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.237918] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.237925] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.237934] pci 0000:00:1e.0: setting latency timer to 64
[ 0.237942] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.237946] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.237950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.237954] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.237959] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.237963] pci_bus 0000:01: resource 1 [mem 0x90600000-0x906fffff]
[ 0.237967] pci_bus 0000:01: resource 2 [mem 0x90800000-0x909fffff 64bit pref]
[ 0.237972] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.237976] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff]
[ 0.237980] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
[ 0.237984] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.237988] pci_bus 0000:03: resource 1 [mem 0x90400000-0x904fffff]
[ 0.237992] pci_bus 0000:03: resource 2 [mem 0x90a00000-0x90cfffff pref]
[ 0.237997] pci_bus 0000:04: resource 1 [mem 0x90300000-0x903fffff]
[ 0.238001] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.238005] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.238009] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.238013] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.238088] NET: Registered protocol family 2
[ 0.238250] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.239170] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.241419] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.241995] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.241999] TCP: reno registered
[ 0.242015] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.242042] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.242207] NET: Registered protocol family 1
[ 0.242239] pci 0000:00:02.0: Boot video device
[ 0.242578] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.242662] Unpacking initramfs...
[ 0.452648] Freeing initrd memory: 5820k freed
[ 0.456693] audit: initializing netlink socket (disabled)
[ 0.456719] type=2000 audit(1340724146.456:1): initialized
[ 0.457302] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.460514] VFS: Disk quotas dquot_6.5.2
[ 0.460597] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.460751] msgmni has been set to 3939
[ 0.461070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.461121] io scheduler noop registered
[ 0.461125] io scheduler deadline registered
[ 0.461224] io scheduler cfq registered (default)
[ 0.461477] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.461710] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 0.461950] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.462157] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.462166] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.462198] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.462203] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.462210] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.462242] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.462246] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.462253] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.462369] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.462374] vesafb: scrolling: redraw
[ 0.462379] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.464035] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90004980000, using 3072k, total 3072k
[ 0.508030] Console: switching to colour frame buffer device 128x48
[ 0.551844] fb0: VESA VGA frame buffer device
[ 0.551863] efifb: dmi detected MacBook4,1 - framebuffer at 0x80000000 (1024x768, stride 4096)
[ 0.551868] intel_idle: does not run on family 6 model 23
[ 0.551930] GHES: HEST is not enabled!
[ 0.552035] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.552762] Linux agpgart interface v0.103
[ 0.552879] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.553759] i8042: No controller found
[ 0.553878] mousedev: PS/2 mouse device common for all mice
[ 0.553966] rtc_cmos 00:08: RTC can wake from S4
[ 0.554165] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.554204] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.554221] cpuidle: using governor ladder
[ 0.554225] cpuidle: using governor menu
[ 0.554454] TCP: cubic registered
[ 0.554641] NET: Registered protocol family 10
[ 0.554976] NET: Registered protocol family 17
[ 0.554983] Registering the dns_resolver key type
[ 0.555206] PM: Hibernation image not present or could not be loaded.
[ 0.555216] registered taskstats version 1
[ 0.556175] rtc_cmos 00:08: setting system clock to 2012-06-26 15:22:26 UTC (1340724146)
[ 0.556299] Initializing network drop monitor service
[ 0.558944] Freeing unused kernel memory: 740k freed
[ 0.559290] Write protecting the kernel read-only data: 8192k
[ 0.568413] Freeing unused kernel memory: 1588k freed
[ 0.572710] Freeing unused kernel memory: 640k freed
[ 0.586045] udevd[40]: starting version 185
[ 0.590818] [drm] Initialized drm 1.1.0 20060810
[ 0.592306] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.592621] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.594306] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
[ 0.594543] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 0.595388] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.595444] ACPI: Lid Switch [LID0]
[ 0.595539] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.595547] ACPI: Power Button [PWRB]
[ 0.595632] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.595639] ACPI: Sleep Button [SLPB]
[ 0.595763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.595769] ACPI: Power Button [PWRF]
[ 0.596508] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 0.596517] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.602545] i915 0000:00:02.0: setting latency timer to 64
[ 0.749351] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 0.749367] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.749370] [drm] Driver supports precise vblank timestamp query.
[ 0.749462] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.117606] [drm] initialized overlay support
[ 1.299854] checking generic (80000000 300000) vs hw (80000000 10000000)
[ 1.299860] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.299886] Console: switching to colour dummy device 80x25
[ 1.301293] fbcon: inteldrmfb (fb0) is primary device
[ 1.430434] Console: switching to colour frame buffer device 160x50
[ 1.435865] fb0: inteldrmfb frame buffer device
[ 1.435868] drm: registered panic notifier
[ 1.435878] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.456696] Refined TSC clocksource calibration: 2393.999 MHz.
[ 1.456705] Switching to clocksource tsc
[ 1.821716] usbcore: registered new interface driver usbfs
[ 1.821753] usbcore: registered new interface driver hub
[ 1.826806] usbcore: registered new device driver usb
[ 1.827520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.827588] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.827594] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.827633] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.827675] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.831556] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.831587] ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00
[ 1.842320] SCSI subsystem initialized
[ 1.845102] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.845354] hub 1-0:1.0: USB hub found
[ 1.845362] hub 1-0:1.0: 4 ports detected
[ 1.845549] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.845555] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.845572] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.845613] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.847254] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.850589] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.850624] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800
[ 1.851193] libata version 3.00 loaded.
[ 1.860054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.860280] hub 2-0:1.0: USB hub found
[ 1.860289] hub 2-0:1.0: 6 ports detected
[ 1.860472] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.860478] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.860494] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.860539] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0
[ 1.860750] hub 3-0:1.0: USB hub found
[ 1.860757] hub 3-0:1.0: 2 ports detected
[ 1.860892] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.860898] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.860912] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.860965] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
[ 1.861172] hub 4-0:1.0: USB hub found
[ 1.861178] hub 4-0:1.0: 2 ports detected
[ 1.861312] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.861318] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.861332] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.861366] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[ 1.861578] hub 5-0:1.0: USB hub found
[ 1.861585] hub 5-0:1.0: 2 ports detected
[ 1.861717] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.861723] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.861744] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.861795] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060
[ 1.862003] hub 6-0:1.0: USB hub found
[ 1.862010] hub 6-0:1.0: 2 ports detected
[ 1.862142] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.862148] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.862165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.862200] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
[ 1.862411] hub 7-0:1.0: USB hub found
[ 1.862417] hub 7-0:1.0: 2 ports detected
[ 1.862917] ata_piix 0000:00:1f.1: version 2.13
[ 1.862932] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.862937] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.862993] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.869158] scsi0 : ata_piix
[ 1.874884] scsi1 : ata_piix
[ 1.875449] ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 21
[ 1.875454] ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 21
[ 1.875665] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
[ 1.875722] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.881780] scsi2 : ata_piix
[ 1.887944] scsi3 : ata_piix
[ 1.888739] ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18
[ 1.888745] ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18
[ 2.033862] ata1.00: ATAPI: MATSHITADVD-R UJ-867, HB01, max UDMA/66
[ 2.065117] ata1.00: configured for UDMA/66
[ 2.065887] ata3.00: ATA-8: Hitachi HTS542516K9SA00, BBCAC3GP, max UDMA/133
[ 2.065893] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.067318] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-867 HB01 PQ: 0 ANSI: 5
[ 2.077869] ata3.00: configured for UDMA/133
[ 2.078045] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCA PQ: 0 ANSI: 5
[ 2.087306] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 2.087313] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.088645] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.093226] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.093312] sd 2:0:0:0: [sda] Write Protect is off
[ 2.093318] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.093371] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.184704] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.184707] sda3: <bsd:bad subpartition - ignored
[ 2.184709] bad subpartition - ignored
[ 2.184710] bad subpartition - ignored
[ 2.184712] bad subpartition - ignored
[ 2.184713] >
[ 2.185557] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.260045] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 2.770036] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 2.948125] usbhid 3-1:1.0: couldn't find an input interrupt endpoint
[ 2.948381] usbcore: registered new interface driver usbhid
[ 2.948385] usbhid: USB HID core driver
[ 3.170028] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[ 3.179293] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.576705] usb 7-2: new full-speed USB device number 3 using uhci_hcd
[ 5.022890] udevd[198]: starting version 185
[ 5.426262] applesmc: SIS!ui16\xffffffc0\xffffffa6: read arg fail
[ 5.562551] applesmc: key=220 fan=1 temp=10 acc=1 lux=0 kbd=0
[ 5.562558] applesmc: init_smcreg() took 50 ms
[ 5.584285] input: applesmc as /devices/platform/applesmc.768/input/input5
[ 5.658889] lib80211: common routines for IEEE802.11 drivers
[ 5.658894] lib80211_crypt: registered algorithm 'NULL'
[ 5.711977] cfg80211: Calling CRDA to update world regulatory domain
[ 5.924357] wl: module license 'Mixed/Proprietary' taints kernel.
[ 5.924364] Disabling lock debugging due to kernel taint
[ 5.946193] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 6.001836] lib80211_crypt: registered algorithm 'TKIP'
[ 6.002152] eth0: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.100.82.112
[ 6.084085] Linux media interface: v0.10
[ 6.133183] iTCO_vendor_support: vendor-support=0
[ 6.134458] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.134601] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 6.134703] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.156626] ACPI: Battery Slot [BAT0] (battery absent)
[ 6.163544] ACPI: AC Adapter [ADP1] (on-line)
[ 6.164216] ACPI: Requesting acpi_cpufreq
[ 6.173706] Monitor-Mwait will be used to enter C-1 state
[ 6.178506] Monitor-Mwait will be used to enter C-2 state
[ 6.183424] Monitor-Mwait will be used to enter C-3 state
[ 6.183457] Marking TSC unstable due to TSC halts in idle
[ 6.183507] ACPI: acpi_idle registered with cpuidle
[ 6.183963] Switching to clocksource hpet
[ 6.210896] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 6.210909] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.242033] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.275396] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 6.338786] Linux video capture interface: v2.00
[ 6.426865] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 6.429319] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 6.429831] usbcore: registered new interface driver uvcvideo
[ 6.429835] USB Video Class driver (1.1.1)
[ 6.496844] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 6.587003] sky2: driver version 1.30
[ 6.587217] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.587761] sky2 0000:03:00.0: irq 44 for MSI/MSI-X
[ 6.588473] sky2 0000:03:00.0: eth1: addr 00:22:41:21:43:0c
[ 6.654740] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 6.655770] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.661489] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 6.700987] udevd[214]: renamed network interface eth0 to wlan0
[ 6.824841] hda_codec: ALC889A: SKU not ready 0x400000f0
[ 6.827442] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 6.848101] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.850714] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.942266] appletouch: Geyser mode initialized.
[ 6.942380] input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input10
[ 6.942768] usbcore: registered new interface driver appletouch
[ 6.996893] firewire_core 0000:04:03.0: created device fw0: GUID 002241fffe41d624, S400
[ 7.131526] apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
[ 7.135766] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input11
[ 7.136230] apple 0003:05AC:0229.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
[ 7.139354] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input12
[ 7.139526] apple 0003:05AC:0229.0003: input,hidraw2: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
[ 7.423516] usb 3-1: USB disconnect, device number 2
[ 7.650081] usb 3-1: new full-speed USB device number 3 using uhci_hcd
[ 8.322211] Bluetooth: Core ver 2.16
[ 8.322655] NET: Registered protocol family 31
[ 8.322660] Bluetooth: HCI device and connection manager initialized
[ 8.322665] Bluetooth: HCI socket layer initialized
[ 8.322669] Bluetooth: L2CAP socket layer initialized
[ 8.322680] Bluetooth: SCO socket layer initialized
[ 8.359817] usbcore: registered new interface driver btusb
[ 9.183365] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 9.336886] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 9.377553] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 9.380170] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 9.497613] Adding 4184928k swap on /dev/sda5. Priority:-1 extents:1 across:4184928k
[ 11.804445] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.845740] Bluetooth: RFCOMM TTY layer initialized
[ 11.845751] Bluetooth: RFCOMM socket layer initialized
[ 11.845755] Bluetooth: RFCOMM ver 1.11
[ 12.221084] fbsplashd.stati[78]: segfault at 2c ip 000000000040579b sp 00007f2267333d00 error 4 in fbsplashd.static (deleted)[400000+233000]
[ 24.154605] sky2 0000:03:00.0: eth1: enabling interface
[ 24.155329] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 28.831988] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 28.933444] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 29.363373] wlan0: no IPv6 routers present
[ 30.487575] sky2 0000:03:00.0: eth1: disabling interface
[ 30.500233] sky2 0000:03:00.0: eth1: enabling interface
[ 30.501015] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 40.563473] wlan0: no IPv6 routers present
[ 45.535875] fuse init (API version 7.18)
[ 70.827136] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 70.867639] ISO 9660 Extensions: RRIP_1991A
[ 398.754336] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 398.776167] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 422.037689] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16396 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 422.311888] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16397 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 422.859975] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16398 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 423.955325] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16399 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 426.147338] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16400 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 430.531638] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16401 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
02:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8058 PCI-E Gigabit Ethernet Controller (rev 13)
04:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 61)
/etc/rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Skopje"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
LOCALE="en_GB.UTF-8"
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MODULES=(applesmc wl uvcvideo)
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME=stefan.local
interface=
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
# DAEMONS
DAEMONS=(syslog-ng sensors dbus network @firestarter @bluetooth crond cmp-daemon gdm @wicd alsa)
Thanks

Army wrote:
This might not help you a lot, but if you want a stable system, try using packages from the repo wherever possible, look at the news before you update your system and don't mess things up (like bad configuration etc.).
When it comes to performance, you won't gain much by compiling linux by yourself! Just use the linux package from [core] or if you want a bit more performance, install the ck-kernel from
[repo-ck]
Server = http://repo-ck.com/$arch
(this has to go to the bottom of /etc/pacman.conf)
(use that one which is best for your cpu (in your case this might be the package linux-ck-corex).
Hmmm, Linux-ck-corex doesn't even load.. I am now trying to install the generic one. Hope it works.
Edit: I will first try linux-lqx...
Last edited by exapplegeek (2012-06-26 18:33:31)

AGPGART, SiS-AGP, Nvidia = Computer Lock

Whenever i have agpgart loaded as a module with sis-agp and nvidia driver set and i startx the computer freezes.. When i use nv it doesnt.. How to solve?

There are several things you can try. The "easiest" would be to change the AGP rate you are currently using, from 8x to 4x or even 2x. The README file NVIDIA supplies gives instructions on how to do that, while using the kernel agpgart, not NVIDIA(s) since the 760 is not supported at this time like you say.
If that doesn't work, try changing the AGP rate in your BIOS.
If that fails, can you change the "AGP drive strength" in your BIOS? Apparently, settings of "0xEA and 0xEE" on VIA based motherboards seem to work best (str8 from the README).
If you're still intent on using the 6629 driver, try recompiling the kernel without the framebuffer entirely. Turn it off.
Outside of that, I've ran across many an SiS related problem on the NVIDIA forums. Some have had good luck by using a driver version before 6106. Try grabbing an older NVIDIA driver and see if that helps. All the newer NVIDIA versions rarely provide any performance gain at all, but are mainly targeted at the newer NVIDIA GPUs. If you're using an older FX or even MX chipset, you won't gain anything from the newer NVIDIA drivers anyway. On my Ti-4600, I've yet to see any performance gain from 4191.

What's the best specifications for 27" iMac in order to run Windows for best performance?

Hey there. I'm based in the UK and in the process of saving up for my first ever iMac (the new 27" model starting from £1699) after years of owning PC's and laptops, but now I'm finally fed up with Windows-based machines, they just don't cut it when it comes to performance and workload...etc.
I wanted to pick iMac users on the community to get clear advice on what the ideal specifications I should consider configuring my iMac when I finally get round to placing my order in March/April. I aim to run Windows 7/ or 8 via Parallels as I hear it's very good and from what video tutorials of it I've seen on YouTube it appears impressive to think the iMac can handle this at the same time as running Mountain Lion.
The ram I plan on upgrading myself manually, yes - I've sussed that one that very quickly due to Apple's extensive £400 fee to simply upgrade the iMac to 32GB, Crucial here I come!
...I digress a little. I'm torn between the Quad-core i5 and i7 as I don't want to get something that won't deliver best performance when it comes to running Windows in parallel (or coherence mode as I hear it's called). Below are some specs I've configured on 2 saved iMacs in my saved baskets.
CONFIGURATION #1
3.2GHz Quad-core Intel Core i5, Turbo Boost up to 3.6GHz
8GB 1600MHz DDR3 SDRAM - 2x4GB
1TB Fusion Drive
NVIDIA GeForce GTX 680MX 2GB GDDR5
Order total: £2,019
CONFIGURATION #2
3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
8GB 1600MHz DDR3 SDRAM - 2x4GB
3TB Fusion Drive
NVIDIA GeForce GTX 680MX 2GB GDDR5
Order total: £2,299
I'd appreciate anybody's time and patience on this little matter. Thank you.

You don't need to go overboard on your hardware to run windows effectively. I bootcamp win7 on a late 2008 MacBook Pro with no issues. However, for an intense windows game I boot straight into windows. If you do not plan on gaming other than an occasional instance by your brother than this should be an acceptable solution.
One caveat is ram which you have already stated your are upgrading.
A general rule of thumb I live by is get the best you can afford now and it will prolong the need to upgrade in the future. That being said... The choices you have provided are all good choices. Preference on screen size will dictate your overall decision, of course. The need for i5 vs i7 CPU is normally not a factor for the majority of users. If you need to save some money then by all means choose the lesser configuration as it will handle windows fine.
One place you should consider the upgrade is the video card. Since you cannot upgrade this after purchase it is advisable to do this now. Also, the differences between the 675mx and the 680mx are far greater than what the naming implies.
Also, as mentioned in a previous post, the 3TB fusion drive can't bootcamp windows. There is a hack for the non-fusion version, but I have not heard of anyone getting that hack to work on the fusion drive. There are other creative options you can implement to make this work, however, it will require an additional investment in some 3rd party hardware. For a novice Mac user I would recommend the smaller fusion drive and external thunderbolt/USB storage as dictated by your needs in the future.
HTH

Best practice for # of drives for Oracle on a Windows 2003 server

I need to know what the best practice is concerning the # of drives that should be built on a Windows 2003 server to ensure best performance and most effective back up and recovery, for both the application itself and the data base.
I'm not certain, but it may be only a 32 bit machine. I'll update this once I know for sure.

We are in the process of migrating our Oracle 10 database (20G) to a new maschine.
How should we configure our disks (8 in total)?
1. SAME: "Stripe and mirror everything"?
2. Doc 30286.1 "I/O tuning with different RAID configurations" and 148342.1 "Avoiding I/O disk contention" say:
database files on RAID01
redo and archive logs on RAID1
temp on RAID1
So, what is the best practice?

How to connect multiple Xserve Raid for Best Performance

I like to get an idea how to connect multiple Xserve Raid to get the best performance for FCP to do multiple stream HD.

Again, for storage (and retrieval), FireWire 400 should be fast enough. If you are encoding video directly to the external drive, then FireWire 800 would probably be beneficial. But as long as the processing of the video is taking place on the fast internal SATA drive, and then you are storing files on the external drive, FireWire 400 should be fine.
Instead of speculating about whether it will work well or not, you need to set it up and try your typical work flow. That is the only way you will know for sure if performance is acceptable or not.
For Time Machine, you should use a single 1.5TB drive. It is likely that by the time your backup needs comes close to exceeding that space, you will be able to buy a 3TB (or larger) single drive for the same cost. Also, I would not trust a RAID where the interaction between the two drives is through two USB cables and a hub. If your primary storage drive fails, you need your backup to be something that is simple and reliable.
Oh, and there should be no problem with the adapter, if you already have it and it works.
Edit: If those two external drives came formatted for Windows, make sure you have use Disk Utility Partition tab to repartition and reformat the drive. When you select the drive in the Disk Utility sidebar, at the bottom of the screen +Partition Map Scheme+ should say *GUID Partition Table*. When you select the volume under the drive in the sidebar, Format should say *Mac OS Extended (Journaled)*.

CS4: Best use of SSD drives?

I'm considering adding an SSD or two to the mix and am wondering where I'll get the best performance bang for the buck in a NLE situation. The current box is Vista, but I may be moving to faster ponies on a 64 bit 7 box soon. Doubt there's a difference in recommendations between the two but thought I'd mention it just in case.
First, a tangent. On my Premiere Pro CS4 discs I don't see any indication of 32 / 64 bit versions, but my understanding is that both are available from the DVDs. Can anyone confirm this?
As to the SSDs, the general wisdom for overal performance is to use them as the boot / system drive to boost app load and boot time. For NLE, there are other drive considerations that come into play - the drive(s) where the source footage to be edited resides and the drive(s) that are used for temporary I/O in rendering, playback, etc. There may be other considerations as well, these are just the ones that immediately come to mind.
I'm less concerned about how long the computer takes to boot (it stays up 24/7) or how long an application takes to load, and more focused on the performance of Premiere and After Effects during eding, playback and rendering.
With that in mind, if I bought only one SSD, where would be the best place for it to serve? And if I threw caution and credit cards to the winds and bought two, where would the second one do me the most good?
As always, thanks for any insights you might offer.
Chris

Hi, Harm.
Reading the disk article as we speak, thanks.
Regarding CS4 being 32 bit, I recall you saying the other day that a minimum realistic system would be 12 gigs fo memory. Given the 4 gig limit in the 32 bit architecture, were you referring to CS5? Not sure how CS4 would benefit from > 4 gigs.

Best Performance for apex over Linux+HW RAID

Dear Experts,
Given:
-- Server Specs:
---- HP ProLiant ML370 G6 E5540
---- Processor name: Intel® Xeon® E5540 (4 core, 2.53 GHz, 8MB L3, 80W)
---- Storage Controller: (1) Smart Array P410i/256MB
---- 8 SAS HardDisks with 320 GB for each
---- 12 GB RAM
Required:
1)) What are the best practice bring the best performance to Apex for the following solution stack
---- Oracle Linux 6.3 x86_64
---- Grid Infrastructure 11g R2
---- Database 11g R2
---- Oracle Apex 4.2.1
2)) What is the best hardware RAID configuration?
3)) What is the maximum concurrent users of applications on apex according to the above specs+software stack ?
Regards
Mahmoud

Dear Alvaro
Thank you for your response.
The current status
When I entered HP ACU from bootable Smart Start CD, I found under the configuration of Smart Array P410i in Embedded Slot, the following:
-Smart Array P410i in Embedded Slot
---Internal Drive Cage at Port 1I : Box 1
------300 GB 2-Part SAS Drive at Part 1I : Box 1 : Bay 1
------300 GB 2-Part SAS Drive at Part 1I : Box 1 : Bay 2
------300 GB 2-Part SAS Drive at Part 1I : Box 1 : Bay 3
------300 GB 2-Part SAS Drive at Part 1I : Box 1 : Bay 4
---Internal Drive Cage at Port 2I : Box 1
------300 GB 2-Part SAS Drive at Part 2I : Box 1 : Bay 5
------300 GB 2-Part SAS Drive at Part 2I : Box 1 : Bay 6
------300 GB 2-Part SAS Drive at Part 2I : Box 1 : Bay 7
------300 GB 2-Part SAS Drive at Part 2I : Box 1 : Bay 8
The questions now:
1) Do you recommend the following configuration for RAID's logical arrays:
Using Logical View:
SAS Array A - 4 Logical Drive(s)
--- Logical Drive 1 (50.0 GB, RAID 1+0) ---> for OS
--- Logical Drive 2 (24.0 GB, RAID 0) ---> for SWAP
--- Logical Drive 3 (200.0 GB, RAID 1+0) ---> for ASM DATA
--- Logical Drive 4 (296.7 GB, RAID 1+0) ---> for ASM FRA
SAS Array B - 1 Logical Drive(s)
--- Logical Drive 5 (1.1 TB, RAID 0) ---> for non-critical applications and sources
2) What are your recommendations for the following steps to reach oracle apex 4.2 installed?
Best Regards
Mahmoud

15" Titanium PB best performance: tiger leopard?

I recently inherited a 15" Titanium PB (Tiger, 1GHz, 512MB, 60GB HD). The computer shipped with Panther, and was upgraded to Tiger several years ago. I have the option of upgrading it to Leopard (I already have the family license for Leopard for several other computers). Obviously, the computer barely meets the specs for Leopard (memory in particular.) If I installed Leopard, I would at least give it an additional 256MB of memory.
Even considering the extra memory, would it be pointless to move to Leopard, in the big picture? My priority is to have the best performance possible either way -- the features in Leopard would be great, but I don't desperately need them. I want to start fresh completely fresh with this computer, so no backups are necessary, eliminating any upgrade-related hassles in that area. In fact, erasing the hard drive would be a great thing to do in the upgrade, if I could. Is that possible?
Which way should I go?
Thanks
Message was edited by: Eric Rosenwald
Message was edited by: Eric Rosenwald

Before you start erasing the drive to do anything consider that the computer barely meets the needs for running either Tiger or Leopard. I would look to increase RAM to the computer's maximum. There are a couple of PB models that were available with 1 GHz processors. Open System Profiler and check the machine ID. If it's 3,5 then you can expand RAM to 1 GB. If the ID is 5,2 then the maximum is 2 GBs. 1 GB would be usable with Tiger. Leopard should have at least 2 GBs.
You will also need to put in a larger and faster hard drive.
If you want to erase the hard drive then boot the computer from the OS X Installer Disc One that came with the computer or a retail version of Tiger compatible with the model you have or a Leopard DVD installer. When you get to the section for selecting a target click on your hard drive then click on the Options button. Select Erase and Install then click on the OK button. Complete the installation.

What is the best choice of hard drives?

My G4 AGP.350MHz with 1.3 GHz upgrade needs an additional internal hard drive for backup. It currently has an 80 GB and 160 GB. I am moving out the 80 GB HDD to my G3 Beige. I am thinking about getting a 80-120 GB for replacement. What is the best choice of hard drives?
Will the 80 GB hard drive, with Mac OS 10.4.4 installed, run in my G3 Beige 233MHz with G4 500MHz upgrade?
Thanks.
Robert

"What is the best choice of hard drives?"
I'm thinking of adding a drive to my G4. I will probably put a 150 MB SATA PCI card in and get a SATA drive. Going from the ATA66 interface to the 150 SATA should be a noticeable improvement.
"Will the 80 GB hard drive, with Mac OS 10.4.4 installed, run in my G3 Beige 233MHz with G4 500MHz upgrade?"
As long as it's an IDE drive, it should work fine. Be sure you have only one of the drives set as the master, if you have more than one drive.
Powermac G4-AGP Mac OS X (10.4.4) Fastmac 1.4Ghz

New sis agp drivers suspeted faulty

http://www.warp2search.net/article.php?sid=10333&mode=thread&order=0
no idea if its right but check yours see what go installed
"SiS screwed up their new AGP 1.14 drivers : i've downloaded new sis AGP GART 1.14 drivers but setup program installs old 1.12 drivers (by 29.09.02 date) and not new 1.14 (by 24.12.02 date) drivers. Also driver WILL NOT ENABLE 8X MODE but only 4x!!!

Hi, i'm using the below setup.
P4 1.6A
MSI 645 Ultra (bios 1.9)
256Mb PC2100
Hercules R8500LE 64mb (Omega 2.3.55)
WinXP pro + SP1
SiS IDE 2.02 drivers
Is it really necessary to install the SiS AGP drivers & the IDE drivers?? & why is it so?

New sis agp drivers

http://www.warp2search.net/article.php?sid=10242&mode=thread&order=0
http://driver.sis.com/agp/agp114.exe
http://download.sis.com/sisdlc/download_faq.jsp
SiS have released a new AGP driver. This time its version 1.14 WHQL for the following chipsets:
SiS540, SiS630, SiS630ET, SiS630E, SiS630S, SiS630ST, SiS635, SiS645, SiS645DX, SiS648, SiS650, SiS651, SiS730S, SiS730SE, SiS735, SiS740, SiS745,

Hi, i'm using the below setup.
P4 1.6A
MSI 645 Ultra (bios 1.9)
256Mb PC2100
Hercules R8500LE 64mb (Omega 2.3.55)
WinXP pro + SP1
SiS IDE 2.02 drivers
Is it really necessary to install the SiS AGP drivers & the IDE drivers?? & why is it so?

DON'T USE SiS ide driver, it sucks

Using this driver causes my system to hang (the mouse pauses and would not move) for about 1 sec every time there's heavy disk activity, very annoying. This applies to the latest Sis IDE driver on their website and the same is true for their earlier driver
Also using Sandra benchmark the WinXP IDE driver outperforms the one by SiS
645E-Max (645 Ultra version 2.0)
P4B 2.4Ghz
Maxtor ATA100 40Gb
Win XP Pro

My "mouse hesitation" went away after I updated to the latest BIOS ver 3.2 which supports AGP fast write and replace my AGP with a better AGP video card which supports FW.
Now I don;t know if the BIOS fixes it or putting in a new AGP card does but I haven't seen the 1-second mouse hesitation anymore
Also the new BIOS fixes a screen corruption problem which I previously had with the better AGP card

BEST PERFORMANCE SIS AGP DRIVER

Similar Messages

Maybe you are looking for