Best Performing Memory Configuration
Is there a performance difference between eight 512 mb memory sticks (4 Gigabytes total) and two 2 Gig (4 Gigabytes total)? I heard that latency increases with the number of memory sticks, but is this significant?
I am looking at the most cost effective way to get to 3-4 total gigabytes of memory. It looks like I have to buy the system with at least two 512 sticks. If I want to get to 4 gigabytes I either have to throw out this memory or go with some other combination. Two 512 sticks and two 1 gigabyte sticks would work, but I don't know if 3 gigabytes of memory will be enough. I want to be able to use Aperture and Photoshop without any limitations.
G4 Powerbook Mac OS X (10.4.8) CD 23
Yes there is data, from both Apple and Intel (and probably on Crucial's site).
256-bit wide requires two DIMMs on each Riser.
There is a boost using 1GB or 2GB DIMMs as well, making 4 x 1GB your best performance configuration.
Crucial Mac Pro
RAM Expansion
AnandTech - Understanding FB-DIMMs
Ars Review
- benchmarking charts
Barefeats: Mac Pro Memory considerations
AMUG review looks at Mac Pro (includes memory bench tests)
What are FB-DIMMs?
How FB-DIMM Memories Work
Memory latency was perhaps the greatest weakness of the G5 / U3 northbridge combo. Memory latency was perhaps the greatest weakness of the G5 / U3 northbridge combo. XLR8 BBS
Inside the Mac Pro MacWorld: Memory
Mac Pro 2GHz 2GB WD 10K Raptor; MDD G4 Mac OS X (10.4.8) APC RS1500/XS1500; Vista
Similar Messages
-
Mac Pro Configuration : best performance config. using FCP with Doremi's Cine Export
What would be the best Mac Pro configuration option to bring up the most performance(speed) of FCP generating KDM(Key Delivery Message) and DCP(Digital Cinema Package) for cinema use?
Is new Mac Pro compatible with Doremi's Cine Export software? if not i would have to use the previous version of Mac Pro(tower) and would also need the best configuration for this one too!
here's the link for Doremi's Cine Export software - http://www.doremilabs.com/products/cinema-products/cineexport/
I'm not sure if the software above is compatible with FCP X version, because they used to support for FCP 7 only in the previous software...
Anyhow, I'm just starter and I don't have much knowledge about setting up post house, and so.. I'll be glad to take all the feed backs and recommandations from all of you(experts in post production)
Thank youJames,
CineExport has not yet been tested with the latest Mac Pro hardware but it has been tested with the latest Mac OSX Mavericks. There is no reason to believe it wouldn't work with the latest Mac Pro hardware. With that said, CineExport is mostly CPU dependent, so the fastest configuration with the most processing cores is recommended.
CineExport is a plug-in for Compressor, not Final Cut Pro. Therefore, it is compatible with FCP 7 and FCP X in the sense that you can use the FCP "Send to Compressor" option and export your DCP from Compressor (using the CineExport plug-in).
Doremi Labs -
Memory Configuration & Upgrade Recommendations - 2006 Mac Pro
Hello,
It's been a long time since I have been posting here. Nice to see that everyone is still here. I have a memory configuration and upgrade I am now looking at. I'm also interested in how to use Bootcamp and install 64-bit Windows 7 when I have the EFI32. It appears that many of you build a new Windows 7 install DVD?
Here is my current configuration:
A1: 2GB
A2: 2GB
B1: 1GB
B2: 1GB
A3: 512 MB
A4: 512 MB
B3: 512 MB
B4: 512 MB
I'm interested in comparing the 4GB vs. 2GB modules and what are the best options for maxing out this Mac Pro. I have forensic software that uses Oracle that I want to put on Windows 7 or a 64-bit Windows server. The system requirements say 16-32GB in a 64-bit environment for Oracle.
I also want to use CS4, Lightroom, Aperture, Capture One Pro, and FC HD on Snow Leopard.
I would appreciate input on configuration and memory quantities for what appears to now be an ancient Mac Pro and how to use a 64-bit OS on Bootcamp.
Thank you for your time and input!
Michael2006: 4 memory chips is ideal. obviously that only takes you to 16GB max.
2008: 8 memory chips (don't read about 2008 then!)
I've seen people report their 4GB DIMMs run cooler, too, and heat is always an issue when it comes to FBDIMMs. They use a lot of power (watts) and one of the large sources of heat.
What you have now, 2s and 1s and 512s don't get you to 16GB or above, and as I posted you can get to 20GB replacing 4 x 512s.
I'd try with 4 x 4GB, which seems like you have to buy anyway, and see how heat and performance is. And only then consider adding back 2s and 1s to get to 20GB.
in the end, I'd sell the RAM you have if it makes a difference. -
Optimizing system for best performance/stability and a custom kernel
I have ArchLinux running on a MacBook 4.1 (early 2008), and it's running very well so far. But I would like to optimize it for best performance and stability (but not at the cost of losing 'graphical interface' quality). I want to compile a custom kernel, and I actually did once, but didn't do it well (and removed it), so I need some help from experts to tell me what should I disable or enable when compiling a custom kernel.
I will post dmesg and lspci (and rc.conf) here, but if you need any other information, please tell me.
Thanks.
Dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.4-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd31000 (usable)
[ 0.000000] BIOS-e820: 000000007dd31000 - 000000007df32000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007df32000 - 000000007dfe5000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007dfe5000 - 000000007dfe7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007dfe7000 - 000000007eec3000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eec8000 - 000000007eecb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eecb000 - 000000007eecc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eecc000 - 000000007eedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved)
[ 0.000000] BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBook4,1/Mac-F22788A9, BIOS MB41.88Z.00C1.B00.0802091535 02/09/08
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7dd31 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 07F000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07EF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007dd31000
[ 0.000000] 0000000000 - 007dc00000 page 2M
[ 0.000000] 007dc00000 - 007dd31000 page 4k
[ 0.000000] kernel direct mapping tables up to 7dd31000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 37492000 - 37a41000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 000000007eeee1c0 00084 (v01 APPLE Apple00 000000C1 01000013)
[ 0.000000] ACPI: FACP 000000007eeec000 000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F)
[ 0.000000] ACPI: DSDT 000000007eee1000 045C6 (v01 APPLE MacBook 00040001 INTL 20061109)
[ 0.000000] ACPI: FACS 000000007eecc000 00040
[ 0.000000] ACPI: HPET 000000007eeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 000000007eeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 000000007eee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 000000007eee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 000000007eee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 000000007eee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 000000007eec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eec6000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eec5000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007dd31000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007dd31000
[ 0.000000] NODE_DATA [000000007dd2d000 - 000000007dd30fff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007b400000-ffff88007d3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007dd31
[ 0.000000] On node 0 totalpages: 515264
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7989 pages used for memmap
[ 0.000000] DMA32 zone: 503292 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007da00000 s82880 r8192 d23616 u1048576
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 507206
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2011044k/2061508k available (4538k kernel code, 452k absent, 50012k reserved, 4308k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 2 loops
[ 0.000000] Detected 2393.995 MHz processor.
[ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.48 BogoMIPS (lpj=7979983)
[ 0.010013] pid_max: default: 32768 minimum: 301
[ 0.010061] Security Framework initialized
[ 0.010069] AppArmor: AppArmor disabled by boot time parameter
[ 0.010381] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011643] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.012201] Mount-cache hash table entries: 256
[ 0.012567] Initializing cgroup subsys cpuacct
[ 0.012573] Initializing cgroup subsys memory
[ 0.012588] Initializing cgroup subsys devices
[ 0.012592] Initializing cgroup subsys freezer
[ 0.012595] Initializing cgroup subsys net_cls
[ 0.012599] Initializing cgroup subsys blkio
[ 0.012653] CPU: Physical Processor ID: 0
[ 0.012656] CPU: Processor Core ID: 0
[ 0.012660] mce: CPU supports 6 MCE banks
[ 0.012673] CPU0: Thermal monitoring enabled (TM2)
[ 0.012679] using mwait in idle threads.
[ 0.015816] ACPI: Core revision 20120320
[ 0.021231] ftrace: allocating 17820 entries in 70 pages
[ 0.030546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064790] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
[ 0.066663] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.066663] ... version: 2
[ 0.066663] ... bit width: 40
[ 0.066663] ... generic registers: 2
[ 0.066663] ... value mask: 000000ffffffffff
[ 0.066663] ... max period: 000000007fffffff
[ 0.066663] ... fixed-purpose events: 3
[ 0.066663] ... event mask: 0000000700000003
[ 0.083458] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.103350] Booting Node 0, Processors #1 Ok.
[ 0.116508] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.116575] Brought up 2 CPUs
[ 0.116579] Total of 2 processors activated (9579.97 BogoMIPS).
[ 0.120053] devtmpfs: initialized
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7dd31000-0x7df31fff] (2101248 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7dfe5000-0x7dfe6fff] (8192 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec3000-0x7eec4fff] (8192 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec8000-0x7eecafff] (12288 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7eecc000-0x7eedefff] (77824 bytes)
[ 0.123629] NET: Registered protocol family 16
[ 0.123872] ACPI: bus type pci registered
[ 0.123988] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.123995] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[ 0.124001] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.153700] PCI: Using configuration type 1 for base access
[ 0.153895] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.153899] mtrr: probably your BIOS does not setup all CPUs.
[ 0.153901] mtrr: corrected configuration.
[ 0.154568] bio: create slab <bio-0> at 0
[ 0.154568] ACPI: Added _OSI(Module Device)
[ 0.154568] ACPI: Added _OSI(Processor Device)
[ 0.154568] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.154568] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.154919] ACPI: EC: EC description table is found, configuring boot EC
[ 0.159179] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.160245] ACPI: SSDT 000000007eecaa98 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.160625] ACPI: Dynamic OEM Table Load:
[ 0.160630] ACPI: SSDT (null) 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.160795] ACPI: SSDT 000000007eec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.161153] ACPI: Dynamic OEM Table Load:
[ 0.161158] ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.161186] ACPI: SSDT 000000007eec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.161186] ACPI: Dynamic OEM Table Load:
[ 0.161186] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.161186] ACPI: SSDT 000000007eec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.161187] ACPI: Dynamic OEM Table Load:
[ 0.161192] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.161220] ACPI: Interpreter enabled
[ 0.161220] ACPI: (supports S0 S3 S4 S5)
[ 0.161220] ACPI: Using IOAPIC for interrupt routing
[ 0.173742] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.173981] ACPI: No dock devices found.
[ 0.173988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.174581] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.175426] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.175431] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.175436] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.175443] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.175505] PCI host bridge to bus 0000:00
[ 0.175510] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.175514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.175518] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.175523] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.175539] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.175610] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[ 0.175631] pci 0000:00:02.0: reg 10: [mem 0x90100000-0x901fffff 64bit]
[ 0.175645] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.175655] pci 0000:00:02.0: reg 20: [io 0x6110-0x6117]
[ 0.175712] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[ 0.175730] pci 0000:00:02.1: reg 10: [mem 0x90200000-0x902fffff 64bit]
[ 0.175849] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.175917] pci 0000:00:1a.0: reg 20: [io 0x60c0-0x60df]
[ 0.175971] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.176038] pci 0000:00:1a.1: reg 20: [io 0x60a0-0x60bf]
[ 0.176110] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.176140] pci 0000:00:1a.7: reg 10: [mem 0x90704c00-0x90704fff]
[ 0.176140] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.176140] pci 0000:00:1b.0: reg 10: [mem 0x90700000-0x90703fff 64bit]
[ 0.176140] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.176140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.176140] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[ 0.176140] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.176140] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
[ 0.176140] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.176140] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
[ 0.176140] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.176140] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
[ 0.176140] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.176140] pci 0000:00:1d.7: reg 10: [mem 0x90704800-0x90704bff]
[ 0.176140] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.176140] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[ 0.176140] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018f
[ 0.176140] pci 0000:00:1f.1: reg 10: [io 0x6108-0x610f]
[ 0.176140] pci 0000:00:1f.1: reg 14: [io 0x6124-0x6127]
[ 0.176140] pci 0000:00:1f.1: reg 18: [io 0x6100-0x6107]
[ 0.176140] pci 0000:00:1f.1: reg 1c: [io 0x6120-0x6123]
[ 0.176140] pci 0000:00:1f.1: reg 20: [io 0x60e0-0x60ef]
[ 0.176140] pci 0000:00:1f.2: [8086:2828] type 00 class 0x01018f
[ 0.176140] pci 0000:00:1f.2: reg 10: [io 0x60f8-0x60ff]
[ 0.176140] pci 0000:00:1f.2: reg 14: [io 0x611c-0x611f]
[ 0.176140] pci 0000:00:1f.2: reg 18: [io 0x60f0-0x60f7]
[ 0.176140] pci 0000:00:1f.2: reg 1c: [io 0x6118-0x611b]
[ 0.176140] pci 0000:00:1f.2: reg 20: [io 0x6020-0x602f]
[ 0.176140] pci 0000:00:1f.2: reg 24: [io 0x4000-0x400f]
[ 0.176140] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.176140] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.176140] pci 0000:00:1f.3: reg 10: [mem 0x90705000-0x907050ff]
[ 0.176140] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.176140] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.176140] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
[ 0.176140] pci 0000:02:00.0: [14e4:4328] type 00 class 0x028000
[ 0.176140] pci 0000:02:00.0: reg 10: [mem 0x90500000-0x90503fff 64bit]
[ 0.176140] pci 0000:02:00.0: reg 18: [mem 0x90000000-0x900fffff 64bit pref]
[ 0.176140] pci 0000:02:00.0: supports D1 D2
[ 0.176140] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.183347] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.183358] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
[ 0.183369] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
[ 0.183595] pci 0000:03:00.0: [11ab:436a] type 00 class 0x020000
[ 0.183741] pci 0000:03:00.0: reg 10: [mem 0x90400000-0x90403fff 64bit]
[ 0.183826] pci 0000:03:00.0: reg 18: [io 0x5000-0x50ff]
[ 0.184121] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.184581] pci 0000:03:00.0: supports D1 D2
[ 0.184585] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184821] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.184828] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.184836] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
[ 0.184905] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010
[ 0.184934] pci 0000:04:03.0: reg 10: [mem 0x90300000-0x90300fff]
[ 0.185056] pci 0000:04:03.0: supports D1 D2
[ 0.185060] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.185137] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.185148] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
[ 0.185160] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.185165] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.185169] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.185174] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.185211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.185419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.185489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.185588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.185829] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.186233] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.193405] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.193487] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.193565] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.193642] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.193720] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.193797] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
[ 0.193874] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.193957] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.196686] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.196707] vgaarb: loaded
[ 0.196709] vgaarb: bridge control possible 0000:00:02.0
[ 0.196788] PCI: Using ACPI for IRQ routing
[ 0.197237] PCI: pci_cache_line_size set to 64 bytes
[ 0.197407] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.197411] reserve RAM buffer: 000000007dd31000 - 000000007fffffff
[ 0.197573] NetLabel: Initializing
[ 0.197576] NetLabel: domain hash size = 128
[ 0.197579] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.197601] NetLabel: unlabeled traffic allowed by default
[ 0.197632] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.197640] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.197648] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.210013] Switching to clocksource hpet
[ 0.222129] pnp: PnP ACPI init
[ 0.222158] ACPI: bus type pnp registered
[ 0.222675] pnp 00:00: [bus 00-ff]
[ 0.222680] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.222684] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.222688] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.222692] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.222696] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.222700] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.222703] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.222707] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.222711] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.222715] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.222718] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.222723] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.222726] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.222735] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.222739] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.222743] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.222746] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.222750] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.222859] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.222989] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.222993] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.222996] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.223000] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.223003] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[ 0.223006] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.223010] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.223109] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.223115] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.223119] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.223124] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.223129] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.223134] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.223138] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.223145] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.223455] pnp 00:02: [io 0x0300-0x031f]
[ 0.223473] pnp 00:02: [irq 6]
[ 0.223541] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.223606] pnp 00:03: [io 0x0000-0x001f]
[ 0.223610] pnp 00:03: [io 0x0081-0x0091]
[ 0.223614] pnp 00:03: [io 0x0093-0x009f]
[ 0.223617] pnp 00:03: [io 0x00c0-0x00df]
[ 0.223621] pnp 00:03: [dma 4]
[ 0.223695] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.223710] pnp 00:04: [mem 0xff000000-0xffffffff]
[ 0.223778] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.223883] pnp 00:05: [irq 0 disabled]
[ 0.223893] pnp 00:05: [irq 8]
[ 0.223897] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.224002] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.224009] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.224028] pnp 00:06: [io 0x00f0]
[ 0.224038] pnp 00:06: [irq 13]
[ 0.224112] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.224132] pnp 00:07: [io 0x002e-0x002f]
[ 0.224136] pnp 00:07: [io 0x004e-0x004f]
[ 0.224139] pnp 00:07: [io 0x0061]
[ 0.224142] pnp 00:07: [io 0x0063]
[ 0.224145] pnp 00:07: [io 0x0065]
[ 0.224149] pnp 00:07: [io 0x0067]
[ 0.224151] pnp 00:07: [io 0x0070]
[ 0.224154] pnp 00:07: [io 0x0080]
[ 0.224157] pnp 00:07: [io 0x0092]
[ 0.224161] pnp 00:07: [io 0x00b2-0x00b3]
[ 0.224164] pnp 00:07: [io 0x0680-0x069f]
[ 0.224167] pnp 00:07: [io 0x0800-0x080f]
[ 0.224170] pnp 00:07: [io 0x0810-0x0817]
[ 0.224173] pnp 00:07: [io 0x0400-0x047f]
[ 0.224177] pnp 00:07: [io 0x0500-0x053f]
[ 0.224180] pnp 00:07: [io 0x1640-0x164f]
[ 0.224302] system 00:07: [io 0x0680-0x069f] has been reserved
[ 0.224307] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.224312] system 00:07: [io 0x0810-0x0817] has been reserved
[ 0.224316] system 00:07: [io 0x0400-0x047f] has been reserved
[ 0.224320] system 00:07: [io 0x0500-0x053f] has been reserved
[ 0.224325] system 00:07: [io 0x1640-0x164f] has been reserved
[ 0.224331] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.224346] pnp 00:08: [io 0x0070-0x0077]
[ 0.224417] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.228737] pnp: PnP ACPI: found 9 devices
[ 0.228741] ACPI: ACPI bus type pnp unregistered
[ 0.237540] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.237582] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-01] add_size 1000
[ 0.237590] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
[ 0.237607] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.237623] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03-03] add_size 200000
[ 0.237646] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.237652] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.237657] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.237662] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.237672] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90800000-0x909fffff 64bit pref]
[ 0.237678] pci 0000:00:1c.5: BAR 15: assigned [mem 0x90a00000-0x90cfffff pref]
[ 0.237684] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.237689] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.237694] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.237701] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.237710] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
[ 0.237718] pci 0000:00:1c.0: bridge window [mem 0x90800000-0x909fffff 64bit pref]
[ 0.237730] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.237736] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.237746] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
[ 0.237754] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
[ 0.237767] pci 0000:03:00.0: BAR 6: assigned [mem 0x90a00000-0x90a1ffff pref]
[ 0.237772] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.237777] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.237787] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
[ 0.237795] pci 0000:00:1c.5: bridge window [mem 0x90a00000-0x90cfffff pref]
[ 0.237807] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.237816] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
[ 0.237837] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.237918] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.237925] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.237934] pci 0000:00:1e.0: setting latency timer to 64
[ 0.237942] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.237946] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.237950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.237954] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.237959] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.237963] pci_bus 0000:01: resource 1 [mem 0x90600000-0x906fffff]
[ 0.237967] pci_bus 0000:01: resource 2 [mem 0x90800000-0x909fffff 64bit pref]
[ 0.237972] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.237976] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff]
[ 0.237980] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
[ 0.237984] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.237988] pci_bus 0000:03: resource 1 [mem 0x90400000-0x904fffff]
[ 0.237992] pci_bus 0000:03: resource 2 [mem 0x90a00000-0x90cfffff pref]
[ 0.237997] pci_bus 0000:04: resource 1 [mem 0x90300000-0x903fffff]
[ 0.238001] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.238005] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.238009] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.238013] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.238088] NET: Registered protocol family 2
[ 0.238250] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.239170] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.241419] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.241995] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.241999] TCP: reno registered
[ 0.242015] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.242042] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.242207] NET: Registered protocol family 1
[ 0.242239] pci 0000:00:02.0: Boot video device
[ 0.242578] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.242662] Unpacking initramfs...
[ 0.452648] Freeing initrd memory: 5820k freed
[ 0.456693] audit: initializing netlink socket (disabled)
[ 0.456719] type=2000 audit(1340724146.456:1): initialized
[ 0.457302] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.460514] VFS: Disk quotas dquot_6.5.2
[ 0.460597] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.460751] msgmni has been set to 3939
[ 0.461070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.461121] io scheduler noop registered
[ 0.461125] io scheduler deadline registered
[ 0.461224] io scheduler cfq registered (default)
[ 0.461477] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.461710] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 0.461950] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.462157] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.462166] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.462198] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.462203] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.462210] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.462242] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.462246] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.462253] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.462369] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.462374] vesafb: scrolling: redraw
[ 0.462379] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.464035] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90004980000, using 3072k, total 3072k
[ 0.508030] Console: switching to colour frame buffer device 128x48
[ 0.551844] fb0: VESA VGA frame buffer device
[ 0.551863] efifb: dmi detected MacBook4,1 - framebuffer at 0x80000000 (1024x768, stride 4096)
[ 0.551868] intel_idle: does not run on family 6 model 23
[ 0.551930] GHES: HEST is not enabled!
[ 0.552035] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.552762] Linux agpgart interface v0.103
[ 0.552879] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.553759] i8042: No controller found
[ 0.553878] mousedev: PS/2 mouse device common for all mice
[ 0.553966] rtc_cmos 00:08: RTC can wake from S4
[ 0.554165] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.554204] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.554221] cpuidle: using governor ladder
[ 0.554225] cpuidle: using governor menu
[ 0.554454] TCP: cubic registered
[ 0.554641] NET: Registered protocol family 10
[ 0.554976] NET: Registered protocol family 17
[ 0.554983] Registering the dns_resolver key type
[ 0.555206] PM: Hibernation image not present or could not be loaded.
[ 0.555216] registered taskstats version 1
[ 0.556175] rtc_cmos 00:08: setting system clock to 2012-06-26 15:22:26 UTC (1340724146)
[ 0.556299] Initializing network drop monitor service
[ 0.558944] Freeing unused kernel memory: 740k freed
[ 0.559290] Write protecting the kernel read-only data: 8192k
[ 0.568413] Freeing unused kernel memory: 1588k freed
[ 0.572710] Freeing unused kernel memory: 640k freed
[ 0.586045] udevd[40]: starting version 185
[ 0.590818] [drm] Initialized drm 1.1.0 20060810
[ 0.592306] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.592621] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.594306] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
[ 0.594543] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 0.595388] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.595444] ACPI: Lid Switch [LID0]
[ 0.595539] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.595547] ACPI: Power Button [PWRB]
[ 0.595632] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.595639] ACPI: Sleep Button [SLPB]
[ 0.595763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.595769] ACPI: Power Button [PWRF]
[ 0.596508] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 0.596517] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.602545] i915 0000:00:02.0: setting latency timer to 64
[ 0.749351] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 0.749367] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.749370] [drm] Driver supports precise vblank timestamp query.
[ 0.749462] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.117606] [drm] initialized overlay support
[ 1.299854] checking generic (80000000 300000) vs hw (80000000 10000000)
[ 1.299860] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.299886] Console: switching to colour dummy device 80x25
[ 1.301293] fbcon: inteldrmfb (fb0) is primary device
[ 1.430434] Console: switching to colour frame buffer device 160x50
[ 1.435865] fb0: inteldrmfb frame buffer device
[ 1.435868] drm: registered panic notifier
[ 1.435878] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.456696] Refined TSC clocksource calibration: 2393.999 MHz.
[ 1.456705] Switching to clocksource tsc
[ 1.821716] usbcore: registered new interface driver usbfs
[ 1.821753] usbcore: registered new interface driver hub
[ 1.826806] usbcore: registered new device driver usb
[ 1.827520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.827588] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.827594] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.827633] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.827675] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.831556] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.831587] ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00
[ 1.842320] SCSI subsystem initialized
[ 1.845102] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.845354] hub 1-0:1.0: USB hub found
[ 1.845362] hub 1-0:1.0: 4 ports detected
[ 1.845549] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.845555] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.845572] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.845613] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.847254] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.850589] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.850624] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800
[ 1.851193] libata version 3.00 loaded.
[ 1.860054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.860280] hub 2-0:1.0: USB hub found
[ 1.860289] hub 2-0:1.0: 6 ports detected
[ 1.860472] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.860478] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.860494] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.860539] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0
[ 1.860750] hub 3-0:1.0: USB hub found
[ 1.860757] hub 3-0:1.0: 2 ports detected
[ 1.860892] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.860898] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.860912] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.860965] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
[ 1.861172] hub 4-0:1.0: USB hub found
[ 1.861178] hub 4-0:1.0: 2 ports detected
[ 1.861312] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.861318] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.861332] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.861366] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[ 1.861578] hub 5-0:1.0: USB hub found
[ 1.861585] hub 5-0:1.0: 2 ports detected
[ 1.861717] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.861723] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.861744] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.861795] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060
[ 1.862003] hub 6-0:1.0: USB hub found
[ 1.862010] hub 6-0:1.0: 2 ports detected
[ 1.862142] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.862148] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.862165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.862200] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
[ 1.862411] hub 7-0:1.0: USB hub found
[ 1.862417] hub 7-0:1.0: 2 ports detected
[ 1.862917] ata_piix 0000:00:1f.1: version 2.13
[ 1.862932] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.862937] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.862993] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.869158] scsi0 : ata_piix
[ 1.874884] scsi1 : ata_piix
[ 1.875449] ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 21
[ 1.875454] ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 21
[ 1.875665] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
[ 1.875722] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.881780] scsi2 : ata_piix
[ 1.887944] scsi3 : ata_piix
[ 1.888739] ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18
[ 1.888745] ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18
[ 2.033862] ata1.00: ATAPI: MATSHITADVD-R UJ-867, HB01, max UDMA/66
[ 2.065117] ata1.00: configured for UDMA/66
[ 2.065887] ata3.00: ATA-8: Hitachi HTS542516K9SA00, BBCAC3GP, max UDMA/133
[ 2.065893] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.067318] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-867 HB01 PQ: 0 ANSI: 5
[ 2.077869] ata3.00: configured for UDMA/133
[ 2.078045] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCA PQ: 0 ANSI: 5
[ 2.087306] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 2.087313] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.088645] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.093226] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.093312] sd 2:0:0:0: [sda] Write Protect is off
[ 2.093318] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.093371] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.184704] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.184707] sda3: <bsd:bad subpartition - ignored
[ 2.184709] bad subpartition - ignored
[ 2.184710] bad subpartition - ignored
[ 2.184712] bad subpartition - ignored
[ 2.184713] >
[ 2.185557] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.260045] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 2.770036] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 2.948125] usbhid 3-1:1.0: couldn't find an input interrupt endpoint
[ 2.948381] usbcore: registered new interface driver usbhid
[ 2.948385] usbhid: USB HID core driver
[ 3.170028] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[ 3.179293] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.576705] usb 7-2: new full-speed USB device number 3 using uhci_hcd
[ 5.022890] udevd[198]: starting version 185
[ 5.426262] applesmc: SIS!ui16\xffffffc0\xffffffa6: read arg fail
[ 5.562551] applesmc: key=220 fan=1 temp=10 acc=1 lux=0 kbd=0
[ 5.562558] applesmc: init_smcreg() took 50 ms
[ 5.584285] input: applesmc as /devices/platform/applesmc.768/input/input5
[ 5.658889] lib80211: common routines for IEEE802.11 drivers
[ 5.658894] lib80211_crypt: registered algorithm 'NULL'
[ 5.711977] cfg80211: Calling CRDA to update world regulatory domain
[ 5.924357] wl: module license 'Mixed/Proprietary' taints kernel.
[ 5.924364] Disabling lock debugging due to kernel taint
[ 5.946193] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 6.001836] lib80211_crypt: registered algorithm 'TKIP'
[ 6.002152] eth0: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.100.82.112
[ 6.084085] Linux media interface: v0.10
[ 6.133183] iTCO_vendor_support: vendor-support=0
[ 6.134458] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.134601] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 6.134703] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.156626] ACPI: Battery Slot [BAT0] (battery absent)
[ 6.163544] ACPI: AC Adapter [ADP1] (on-line)
[ 6.164216] ACPI: Requesting acpi_cpufreq
[ 6.173706] Monitor-Mwait will be used to enter C-1 state
[ 6.178506] Monitor-Mwait will be used to enter C-2 state
[ 6.183424] Monitor-Mwait will be used to enter C-3 state
[ 6.183457] Marking TSC unstable due to TSC halts in idle
[ 6.183507] ACPI: acpi_idle registered with cpuidle
[ 6.183963] Switching to clocksource hpet
[ 6.210896] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 6.210909] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.242033] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.275396] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 6.338786] Linux video capture interface: v2.00
[ 6.426865] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 6.429319] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 6.429831] usbcore: registered new interface driver uvcvideo
[ 6.429835] USB Video Class driver (1.1.1)
[ 6.496844] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 6.587003] sky2: driver version 1.30
[ 6.587217] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.587761] sky2 0000:03:00.0: irq 44 for MSI/MSI-X
[ 6.588473] sky2 0000:03:00.0: eth1: addr 00:22:41:21:43:0c
[ 6.654740] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 6.655770] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.661489] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 6.700987] udevd[214]: renamed network interface eth0 to wlan0
[ 6.824841] hda_codec: ALC889A: SKU not ready 0x400000f0
[ 6.827442] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 6.848101] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.850714] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.942266] appletouch: Geyser mode initialized.
[ 6.942380] input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input10
[ 6.942768] usbcore: registered new interface driver appletouch
[ 6.996893] firewire_core 0000:04:03.0: created device fw0: GUID 002241fffe41d624, S400
[ 7.131526] apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
[ 7.135766] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input11
[ 7.136230] apple 0003:05AC:0229.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
[ 7.139354] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input12
[ 7.139526] apple 0003:05AC:0229.0003: input,hidraw2: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
[ 7.423516] usb 3-1: USB disconnect, device number 2
[ 7.650081] usb 3-1: new full-speed USB device number 3 using uhci_hcd
[ 8.322211] Bluetooth: Core ver 2.16
[ 8.322655] NET: Registered protocol family 31
[ 8.322660] Bluetooth: HCI device and connection manager initialized
[ 8.322665] Bluetooth: HCI socket layer initialized
[ 8.322669] Bluetooth: L2CAP socket layer initialized
[ 8.322680] Bluetooth: SCO socket layer initialized
[ 8.359817] usbcore: registered new interface driver btusb
[ 9.183365] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 9.336886] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 9.377553] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 9.380170] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 9.497613] Adding 4184928k swap on /dev/sda5. Priority:-1 extents:1 across:4184928k
[ 11.804445] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.845740] Bluetooth: RFCOMM TTY layer initialized
[ 11.845751] Bluetooth: RFCOMM socket layer initialized
[ 11.845755] Bluetooth: RFCOMM ver 1.11
[ 12.221084] fbsplashd.stati[78]: segfault at 2c ip 000000000040579b sp 00007f2267333d00 error 4 in fbsplashd.static (deleted)[400000+233000]
[ 24.154605] sky2 0000:03:00.0: eth1: enabling interface
[ 24.155329] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 28.831988] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 28.933444] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 29.363373] wlan0: no IPv6 routers present
[ 30.487575] sky2 0000:03:00.0: eth1: disabling interface
[ 30.500233] sky2 0000:03:00.0: eth1: enabling interface
[ 30.501015] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 40.563473] wlan0: no IPv6 routers present
[ 45.535875] fuse init (API version 7.18)
[ 70.827136] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 70.867639] ISO 9660 Extensions: RRIP_1991A
[ 398.754336] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 398.776167] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 422.037689] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16396 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 422.311888] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16397 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 422.859975] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16398 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 423.955325] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16399 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 426.147338] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16400 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 430.531638] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16401 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
02:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8058 PCI-E Gigabit Ethernet Controller (rev 13)
04:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 61)
/etc/rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Skopje"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
LOCALE="en_GB.UTF-8"
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MODULES=(applesmc wl uvcvideo)
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME=stefan.local
interface=
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
# DAEMONS
DAEMONS=(syslog-ng sensors dbus network @firestarter @bluetooth crond cmp-daemon gdm @wicd alsa)
ThanksArmy wrote:
This might not help you a lot, but if you want a stable system, try using packages from the repo wherever possible, look at the news before you update your system and don't mess things up (like bad configuration etc.).
When it comes to performance, you won't gain much by compiling linux by yourself! Just use the linux package from [core] or if you want a bit more performance, install the ck-kernel from
[repo-ck]
Server = http://repo-ck.com/$arch
(this has to go to the bottom of /etc/pacman.conf)
(use that one which is best for your cpu (in your case this might be the package linux-ck-corex).
Hmmm, Linux-ck-corex doesn't even load.. I am now trying to install the generic one. Hope it works.
Edit: I will first try linux-lqx...
Last edited by exapplegeek (2012-06-26 18:33:31) -
What's the best specifications for 27" iMac in order to run Windows for best performance?
Hey there. I'm based in the UK and in the process of saving up for my first ever iMac (the new 27" model starting from £1699) after years of owning PC's and laptops, but now I'm finally fed up with Windows-based machines, they just don't cut it when it comes to performance and workload...etc.
I wanted to pick iMac users on the community to get clear advice on what the ideal specifications I should consider configuring my iMac when I finally get round to placing my order in March/April. I aim to run Windows 7/ or 8 via Parallels as I hear it's very good and from what video tutorials of it I've seen on YouTube it appears impressive to think the iMac can handle this at the same time as running Mountain Lion.
The ram I plan on upgrading myself manually, yes - I've sussed that one that very quickly due to Apple's extensive £400 fee to simply upgrade the iMac to 32GB, Crucial here I come!
...I digress a little. I'm torn between the Quad-core i5 and i7 as I don't want to get something that won't deliver best performance when it comes to running Windows in parallel (or coherence mode as I hear it's called). Below are some specs I've configured on 2 saved iMacs in my saved baskets.
CONFIGURATION #1
3.2GHz Quad-core Intel Core i5, Turbo Boost up to 3.6GHz
8GB 1600MHz DDR3 SDRAM - 2x4GB
1TB Fusion Drive
NVIDIA GeForce GTX 680MX 2GB GDDR5
Order total: £2,019
CONFIGURATION #2
3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
8GB 1600MHz DDR3 SDRAM - 2x4GB
3TB Fusion Drive
NVIDIA GeForce GTX 680MX 2GB GDDR5
Order total: £2,299
I'd appreciate anybody's time and patience on this little matter. Thank you.You don't need to go overboard on your hardware to run windows effectively. I bootcamp win7 on a late 2008 MacBook Pro with no issues. However, for an intense windows game I boot straight into windows. If you do not plan on gaming other than an occasional instance by your brother than this should be an acceptable solution.
One caveat is ram which you have already stated your are upgrading.
A general rule of thumb I live by is get the best you can afford now and it will prolong the need to upgrade in the future. That being said... The choices you have provided are all good choices. Preference on screen size will dictate your overall decision, of course. The need for i5 vs i7 CPU is normally not a factor for the majority of users. If you need to save some money then by all means choose the lesser configuration as it will handle windows fine.
One place you should consider the upgrade is the video card. Since you cannot upgrade this after purchase it is advisable to do this now. Also, the differences between the 675mx and the 680mx are far greater than what the naming implies.
Also, as mentioned in a previous post, the 3TB fusion drive can't bootcamp windows. There is a hack for the non-fusion version, but I have not heard of anyone getting that hack to work on the fusion drive. There are other creative options you can implement to make this work, however, it will require an additional investment in some 3rd party hardware. For a novice Mac user I would recommend the smaller fusion drive and external thunderbolt/USB storage as dictated by your needs in the future.
HTH -
Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
ThanksHi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy -
The disk configuration is not insync with the in-memory configuration. Software RAID 1 reactivation
In trying to reactivate disk 3 of a raid mirror failed redundancy I get the error - The disk configurationis not insyncwith the in-memory configuration. The drive is accessible but I have no idea which of drive 2 and 3 are in use, drive 2 has unspecified
errors but there is the option to reactivate disk 3.
Does anyone have any idea what this means?
I am running on a HP Proliant ML350 G5 with Windows Server 2012
ThanksHi,
Since the Disk 2's status is Errors, we could not reactivate disk 3. Please try to reactivate disk 2 to check the results.
If the disk does not return to the Online status and the volume does not return to the Healthy status, there may be something wrong with the disk. You should replace the failed mirror disk region.
For more detailed information, please refer to the article below:
Volume status descriptions
http://technet.microsoft.com/en-us/library/cc739417(v=ws.10).aspx#BKMK_2
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How get the best performances with a McBook Pro 2,3GHz and 16 Go of Ram ?
Hi,
I've recently bought a MacBook Pro and I want to optimize my After Effects preferences to enjoy the best performances.
There's the specifications from Apple:
2.3GHz quad-core Intel Core i7
Turbo Boost up to 3.5GHz
16GB 1600MHz memory
512GB PCIe-based flash storage
Intel Iris Pro Graphics
NVIDIA GeForce GT 750M
with 2GB GDDR5 memory
Thanks in advance if one of you could help me to do this
MauriceOptimizing for performance: Adobe Premiere Pro and After Effects | After Effects region of interest
-
Best Practice for configuring ZS3 storage
Hi Team
Can someone help me with the best way to configure data profile for a ZS3-2 storage which is mainly going to be used for oracle database and EBU application.
If we are planning to install ldoms os on storage lun then what data profile should be the best one.
Regards
ABWithout knowing more I would do the following, being very conservative;
Create too pools, with pool0 on controller0 and pool1 on controller1. This is to take advantage of both controllers DRAM, for better performance. Regardless of RAIDZ or RAID 1+0, I would do this.
I am assuming both trays are the same HHDs ( 900G?)
Make the first pool RAID 1+0, with 2 write SSDs and one READ SSD. I would use this pool for redo logs, and database files. Mounting via OISP or dNFS.
Make the second pool RAIDZ, with 2 write SSDs and one READ SSD, I would place my RMAN mount here, and any binary mounts and archive logs. Maybe DB files, if using partitioning. HCC is a great technology to use if you application will benefit from it.
Now for the relaity check!
9 times out of 10 method...
Realistic... just use RAIDZ on both pools. In reality RAID 1+0 generates more IOPS in the array and leads to more DB I/O wait time! It's true!
If you are headed to ECO I'll sit down and explain. short version, RAIDZ does less writes, which means better database performance.
Erik -
Best practices for configure Rogue Detector AP and trunk port?
I'm using a 2504 controller. I dont have WCS.
My questions are about the best way to configure a Rogue Detector AP.
In my lab environment I setup the WLC with 2 APs. One AP was in local mode, and I put the other in Rogue Detector mode.
The Rogue Detector AP was connected to a trunk port on my switch. But the AP needed to get its IP address from the DHCP server running on the WLC. So I set the native vlan of the trunk port to be the vlan on which the WLC management interface resides. If the trunk port was not configured with a native vlan, the AP couldn't get an address through DHCP, nor could the AP communicate with the WLC. This makes sense because untagged traffic on the trunk port will be delivered to the native vlan. So I take it that the AP doesn't know how to tag frames.
Everything looked like it was working ok.
So I connected an autonomous AP (to be used as the rogue), and associated a wireless client to it. Sure enough it showed up on the WLC as a rogue AP, but it didn't say that it was connected on the wire. From the rogue client I was able to successfully ping the management interface of the WLC.
But the WLC never actually reported the rogue AP as being connected to the wired network.
So my questions are:
1. What is the correct configuration for the trunk port? Should it not be configured with a native vlan? If not, then I'm assuming the rogue detector AP will have to have a static IP address defined, and it would have to be told which vlan it's supposed to use to communicate with the WLC.
2. Assuming there is a rogue client associated with the rogue AP, how long should it reasonably take before it is determined that the rogue AP is connected to the wired network? I know this depends on if the rogue client is actually generating traffic, but in my lab environment I had the rogue client pinging the management interface of the WLC and still wasn't being picked up as an on-the-wire rogue.
Thanks for any input!!#what's the autonomous AP's(as Rogue AP) Wired and Wireless MAC address?
it has to be +1 or -1 difference. If Wired MAC is x.x.x.x.x.05 and the wireless mac should be x.x.x.x.x.04 or 06. It is not going to detect if the difference is more than + 1 or - 1.
#Does the switch sees the Rogue AP's wired MAC on its MAC table.
Rogue Detector listens to ARPs to get all the Wired MAC info and forwards to WLC, It compares with Wireless MAC, if there is a +1 or -1 difference then it will be flagged as Rogue on wire. And the client that connected to it is also marked as found on wire.
Regards to Trunking, Only Native vlan matters per trunk link, just configure the right vlan as native and we're done.
It is not mandatory to keep the Rogue detector on Management vlan of wlc. It can also be on L3 vlan also as long as it can join the WLC to forward the learnt wired MACs.
So if we don't have +1, -1 difference on Rogues then you've to use RLDP which will work with your existing setup to find Rogue on wire. there's a performance hit when we use this feature on local mode APs.
Note: For AP join - AP can't understand Trunk, meaning if AP connected to Trunk it'll only talk to its native vlan irrespective of AP mode, however rogue detector listens to the Trunk port to learn MACs via ARPs from different VLANs and forwards to WLC using native vlan. -
What is best performing approach to report building in my case?
Hi all,
I want to know what is the best performing approach in the case of an overload of the system,
understood as large number of concurrent operations.
Each operation is a query that, in most cases, returns a large amount of data.
I am interested in the approach that not create bottlenecks and slow down, blocks for a long time the system.
The alternatives that I would like more information about are:
1) reports built with the JDBC (JNDI) specifying "java:jdbc/xxxxdatasource"
(taken from the oracle-ds.xml's jndi-name tag) as "Connection name (optional)"
with the query written into the rpt file and runned by Crystal Reports that I think makes a direct connection to DB
and integrated into Java with Java Reporting Component.
This approach has also threads limits, depending on the version of the report engine.
2) reports built with "Field definition only" with the query written and runned into the my application that call the report only through the resultSet to be displayed
(reportClientDoc.getDatabaseController().setDataSource(resultSet, tableName , tableName);)
My concern with this approach is that it seems to require loading all results into memory
and generating the report in one big step.
Is there a way to avoid this? Some-how to page through report data?
I've also read that Crystal Reports can work with any data provider that implements ResultSet.
Is this true? If so, could I create my own custom ResultSet implementation that would let me
page through my results without loading everything into memory at-once?
If possible, please point me to the documentation for this approach.
I haven't been able to find any examples.
If there is a better approach that I haven't mentioned, please let me know.
Thanks in advanceThe first option is the best one for performance. The only time you should use result sets is when you need to do runtime manipulation of the data through your application and is not acheivable in a stored procedure.
-
Best Performance for apex over Linux+HW RAID
Dear Experts,
Given:
-- Server Specs:
---- HP ProLiant ML370 G6 E5540
---- Processor name: Intel® Xeon® E5540 (4 core, 2.53 GHz, 8MB L3, 80W)
---- Storage Controller: (1) Smart Array P410i/256MB
---- 8 SAS HardDisks with 320 GB for each
---- 12 GB RAM
Required:
1)) What are the best practice bring the best performance to Apex for the following solution stack
---- Oracle Linux 6.3 x86_64
---- Grid Infrastructure 11g R2
---- Database 11g R2
---- Oracle Apex 4.2.1
2)) What is the best hardware RAID configuration?
3)) What is the maximum concurrent users of applications on apex according to the above specs+software stack ?
Regards
MahmoudDear Alvaro
Thank you for your response.
The current status
When I entered HP ACU from bootable Smart Start CD, I found under the configuration of Smart Array P410i in Embedded Slot, the following:
-Smart Array P410i in Embedded Slot
---Internal Drive Cage at Port 1I : Box 1
------300 GB 2-Part SAS Drive at Part 1I : Box 1 : Bay 1
------300 GB 2-Part SAS Drive at Part 1I : Box 1 : Bay 2
------300 GB 2-Part SAS Drive at Part 1I : Box 1 : Bay 3
------300 GB 2-Part SAS Drive at Part 1I : Box 1 : Bay 4
---Internal Drive Cage at Port 2I : Box 1
------300 GB 2-Part SAS Drive at Part 2I : Box 1 : Bay 5
------300 GB 2-Part SAS Drive at Part 2I : Box 1 : Bay 6
------300 GB 2-Part SAS Drive at Part 2I : Box 1 : Bay 7
------300 GB 2-Part SAS Drive at Part 2I : Box 1 : Bay 8
The questions now:
1) Do you recommend the following configuration for RAID's logical arrays:
Using Logical View:
SAS Array A - 4 Logical Drive(s)
--- Logical Drive 1 (50.0 GB, RAID 1+0) ---> for OS
--- Logical Drive 2 (24.0 GB, RAID 0) ---> for SWAP
--- Logical Drive 3 (200.0 GB, RAID 1+0) ---> for ASM DATA
--- Logical Drive 4 (296.7 GB, RAID 1+0) ---> for ASM FRA
SAS Array B - 1 Logical Drive(s)
--- Logical Drive 5 (1.1 TB, RAID 0) ---> for non-critical applications and sources
2) What are your recommendations for the following steps to reach oracle apex 4.2 installed?
Best Regards
Mahmoud -
IDVD 5 project, 26 chapters, burns Best Performance not Best Quality
My iDVD project WILL burn with 26 chapter headings at "Best Performance", but the same project will NOT burn at "Best Quality". The same file will burn at "Best Quality" without the chapter headings. I have retried multiple times. Each time Best Performance will burn, Best Quality will not.
As a rule I use Best Quality. The last project finished a couple of months ago. (So, probably earlier than 10.4.7) Best Quality usually works for me, just not on this project.
Note, I have filed a bug report but thought I should also share this with discussions.
(All the usual remedies, with resetting cache plist repairing permissions performed between each attempt, and attempts to burn from a new user. The video file has no transitions)
iDVD 5.0.1 (626), Quicktime Pro 7.1.3, 10.4.7
Mac G5 Quicksilver 867 MHz, 2MB L3 cache, memory 1.5 gig.
Entire video length is 00:45:58.
My user set chapter markers are at [00:01:19.2637] [00:03:18.1194] [00:04:06.2638] [00:05:45.2235] [00:07:07.2781] [00:08:16.0988] [00:09:53.0879] [00:12:22.2126] [00:13:04.0552] [00:15:30.2190]
[00:16:15.2725] [00:17:13.0799] [00:18:26.2418] [00:20:02.1206] [00:22:48.1704]
[00:27:03.1369] [00:27:59.0637] [00:29:56.1588] [00:31:27.1161] [00:34:26.1298]
[00:34:59.0097] [00:38:54.1302] [00:41:12.1516] [00:42:02.2966] [00:43:34.1742]
[00:45:09.1127]
So the first chapter marker is over one minute into the video and the last is 49 seconds before the end of the video.
It took me a couple of weeks of futile attempts at Best Quality to figure this out. I am exhausted and don't have the energy to start deleting chapter markers one at a time to see if and when it will burn at Best Quality.
Any thoughts?Hello Robert,
I'm not really able to provide a solution - maybe some of the more knowledgeable users on this board will chime in - but can only offer a guess.
There hav been several reports of compatibility issues between Tiger/QT 7 and iMovie/iDVD 5, so maybe that's your "bug".
Recommended is:
• OS X 10.3.9/QT 6.5.2/iLife 5
• OS X 10.4.x/QT 7.1.x/iLife 6
I would also try to create a new iDVD project for your movie after deleting iDVD prefs and repairing permissions. Then try to create a disk image (if you didn't try that already)
hope this helps
mish -
VMware Fusion Ideal Settings for Best performance
Can someone please help with the ideal settings for VMware Fusion on mac for best performance.
My Machine Details
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
Processor : 2.8 GHz Intel Core
Memory : 16 GB 1333 MHz DDR3
Storage : 750 GB SATA Disk
Graphics : Intel HD Graphics 3000 512 MB
Am using VMware Fusion Version 4.1.2
At Present the resources I have allocated for VMFusion are
Processor : 1 Core
Memory : 4 GB
Thanks
BrijVMware Fusion doesn't slow down the Mac just because having it installed. You have 16 GB of memory in the computer and you assigned 4 GB for the virtual machine you have, so you shouldn't have any memory problem. Also, your Mac has got a great processor that run virtual machines without any problem.
If you feel your Mac slow while running the virtual machine, just reduce the amount of memory assigned to the virtual machine, depending on the operating system you have in the virtual machine. For example, I recommend 2 GB or more for Windows 7, and you can run Linux virtualized assigning only 512 MB of memory -
Are my After Effects preferences set up for best performance?
I'm just wondering if my current settings are going to give me the best performance with what I have. Would you please look over these and see if I should change anything? Thank you.
I have a Windows 7 laptop. It has an Intel Core 2 Duo T6500 Mobile Processor @ 2.1 GHz and 3GB of RAM.
Here are my important preferences:
Previews
Display
Media & Disk Cache
Memory & Multiprocessing
I have a couple of specific questions pertaining to that last link. I'm confused what Minimum allocation per CPU does. And for my setup, would it be better to have longer RAM previews or Faster Rendering? Also, should Prevent DLL Address Space Fragmentation?
Thank you so much for your help! I greatly appreciate it!!If it is of any importance, my Page File is set to 4500 MB and a max of 6000.
Maybe you are looking for
-
Hi I have a Macbook air & iPhone 4. what do I need to do if I want to buy a book (ebook) or an application that is not available in the iTunes store in my area i.e. Africa (Egypt)? Do I need to open a different account in the iTunes store in the othe
-
Tracking notifications sent from BPM process - User Messaging Service
Hi, I have a requirement to track the notifications sent from all the BPM processes in one place. My Requirement is to (1. Check the status, sender, receiver of the notification, 2. view the actual content of the notification, 3. Resend the notificat
-
I have recently begun working with a few AIC-encoded home movie files in FCPX. My goal is to compress them using h.264 for viewing on computer screens. I had a few questions about the best practices for exporting these files, as I haven't worked with
-
E-Recruitment -- Manager Involvement
I need add new fields / removew fields in the requisition form used in management involvement. How you do this? I search this forum no, I see no response.
-
Lost photos on my iPad they seem to be coming back slowly will they?
Lost my photo of my iPad still all on my phone will they come back on my iPad ?