Best Practice for a Print Server

What is the best practice for having a print server serving over 25 printers 10 of which are colour lasers and the rest black and white lasers.
Hardware
At the moment we have one server 2Ghz Dual G5 with 4GB Ram and xserve RAID. The server is also our main Open directory server, with about 400+ clients.
I want to order a new server and want to know the best type of setup for the optimal print server.
Thanks

Since print servers need RAM and spool space, but not a lot of processing power, I'd go with a Mac Mini packed with ram and the biggest HD you can get into it. Then load a copy of Xserver Tiger on it and configure your print server there.
Another option, if you don't mind used equipment, is to pick up an old G4 or G5 Xserve, load it up with RAM and disk space, and put tiger on that.
Good luck!
-Gregg

Similar Messages

Is there a list of best practices for Azure Sql Server?

I was talking with a Sql Server expert today and learned that Azure Sql Server can take up to a minute to respond to a query that normally takes a fraction of a second. This is one of those things where it's really valuable to learn it when architecting as
opposed to when we go live.
Is there a list of best practices for Azure Sql Server? If so, what are they?
We will be calling the database from multiple instances, both Azure websites and Azure cloud services. The calls will be about 90% selects, 9% updates, and 1% inserts.
thanks - dave
What we did for the last 6 months -
Made the world's coolest reporting & docgen system even more amazing

Hi,
Here are some documentation on Azure SQL Database to get you started.
http://msdn.microsoft.com/en-us/library/azure/ee336279.aspx
http://msdn.microsoft.com/en-us/library/azure/ff394102.aspx
http://msdn.microsoft.com/en-us/library/azure/jj156164.aspx
http://msdn.microsoft.com/en-us/library/azure/ee336282.aspx
http://msdn.microsoft.com/en-us/library/azure/ee336256.aspx
Regards,
Mekh.

Best Practice for PDF print forms based on SAP standard

Hi,
I have copied the SAP standard PDF form F_D_INT_SCALE_00 to a Z form, and am using it in conjunction with the standard print program RFDZIS01_PDF. However I need to output some additional fields that are not supplied by the print program / interface (for example Customer VAT number).
What is the best practice for achieving this? As far as I can see the only way is to take a copy of the standard print program and modify it to select the extra data, and modify the interface. I never like taking copies of standard programs though for obvious reasons.
If I had this requirement with a smartform it would be a simple case of embedding ABAP code into the Z smartform and leaving the print program alone, but unfortunately there is no provision for the non-PDF version of the Interest Letter to be sent by email.
Thanks in advance,
Vindaloo

Thanks for your reply Robert.
However I think you are referring to Smartforms when you mention Code Initialization and Global Data declarations. I need to know the best way to modify copies of standard Adobe Print Forms.
Regards,
Vindaloo

Best Practices for NCS/PI Server and Application Monitoring question

Hello,
I am deploying a virtual instance of Cisco Prime Infrastructure 1.2 (1.2.1.012) on an ESX infrastructure. This is being deployed in an enterprise enviroment. I have questions around the best practices for moniotring this appliance. I am looking to monitor application failures (services down, db issues) and "hardware" (I understand this is a virtual machine, but statistics on the filesystem and CPU/Memory is good).
Firstly, I have enabled via the CLI the snmp-server and set the SNMP trap host destination. I have created a notification receiver for the SNMP traps inside the NCS GUI and enabled the "System" type alarm. This type includes alarms like NCS_DOWN and PI database is down. I am trying to understand what the difference between enabling SNMP-SERVER HOST via the CLI and setting the Notification destination inthe GUI is? Also how can I generate a NCS_DOWN alarm in my lab. Doing NCS stop does not generate any alarms. I have not been able to find much information on how to generate this as a test.
Secondly, how and which processes should I be monitoring from the Management Station? I cannot easily identify the main NCS procsses from the output of ps -ef when logged in the shell as root.
Thanks guys!

Amihan_Zerrudo wrote:
1.) What is the cost of having the scope in a <jsp:useBean> tag set to 'session'? I am aware that there are a list of scopes like page, application, etc. and that if i use 'session' my variable will live for as long as that session is alive. (did i get this right?). You should rather look to the functional requirements instead of costs. If the bean need to be session scoped (e.g. maintain the logged in user), then do it so. If it just need to be request scoped (e.g. single page form data), then keep it request scoped.
2.)If the JSP Page where i use that <useBean> is to be accessed hundred of times a day, will it compensate my server resources? Right now i am using the Sun Glassfish Server.It will certainly eat resources. Just supply enough CPU speed and memory to a server. You cannot expect that a webserver running at a Pentium 500MHz with 256MB of memory can flawlessly serve 100 simultaneous users at the same second. But you may expect that it can serve 100 users per 24 hour.
3.) Can you suggest best practice in memory management given the architecture i described above?Just write code so that it doesn't unnecessarily eat memory. Only allocate memory if your application need to do so. You should rather let the hardware depend on the application requirements, not to let the application depend on the hardware specs.
4.)Also, I have implemented connection pooling in my architecture, but my application is to be used by thousands of clients everyday.. Can the Sun Glassfish Server take care of that or will I have to purchase a powerful sever?Glassfish is just an application server software, it is not server hardware. Your concerns are rather hardware related.

Best practice for schedule printing of spool requests

Hi there,
I am searching for a method / best practice how to schedule the printing of different spool requests.
The following situation:
A lot of different spool requests are generated in the night, but they should be printed at a specific time in the morning. So I am searching for a method to get the spool requests and print them to a specific printer at a specific time by job.
Thanks ahead,
Bernd

I found a (very old) SAP program RSPO0065 that seems to do just that. However it does not allow overriding the print paramters, so the actual jobs need be scheduled with the correct parameters, most notably the desired printer.
Thomas

Is there a best practice for multi location server setups including mac mail server?

Afternoon all,
Last year I setup a client with Snow Leopard Server including hosting his mail on the server with Mac Mail Server and calendaring. He now has plans to open other sites with the same setup, how can this be done using Mac Server? The implementation of a new server on the new site would be straight forward my concerns / question are:
1. How would the two servers communicate?
    a.)Do they need to communicate?
3. How will mail across the two sites work?
    a.) How will DNS work for email internally?
    b.) How will DNS work for emai externally?
4. How will calendaring work across the two sites?
Is Mac Server the best platform for moving ahead with this type of business need?
Any help or direction would be greatly appreciated.
Anthony

Camelot,
many thanks for the speedy reply. Your comments are very helpful thank you, if I may I will give you some for information and some other questions.
The offices will be from 5 miles to 25 miles apart, the new office and ones that follow will be considered as branches of the main office for example the company name is Sunflower and it serves area 1, then new will office will serve area 2 and so on. So in theory I could leave the main server domain and mail mx record as sunflower and then add further servers as 2.sunflower.com, 3.sunflower.com as domains and mx records? This would then provide unique mail records and users within the organisation such as [email protected] and [email protected], which doesnt look to good I would prefer all users to be name@sunflower how can this be acheived?
With regard to user activity in the whole users will be fixed but their will be floaters such as managers and the owners that may at times float from one office to the other and would beneift from logging into any machine and getting their profile.
I have thought about VPN's as I have acheieved this type of setup with Microsoft server products, I have found speed issues in some cases, how can this be acheived using OS X, are there any how to docs around? In the Microsoft setup I acheived this using netgear VPN Firewalls which ofcourse adds an overhead, can this be acheived using OS X propietary VPN software?
So ultimatley I would prefer to have the one domain without subs "sunflower.com" and users to be able to login to their profiles from either location. The main location now will remain as headoffice and the primary location and the new will be satelites.
I hope that covers all of your other question, again many thanks for your comments and time.
Kind Regards
Anthony

Best Practices for Configuring Windows Server 2012 R2 for VM Performance

Good afternoon,
I've been told that VMWare has written a document or article on how to get the most performance out of an instance of Server 2012 R2 as a virtual machine. I was told this magical article has things like a checklist of features or services that can be turned off (such as tablet features) that will increase the performance/low overhead on the VM.
Can anyone help me find such an article?
Thanks,
Johnathan

Hello there,
There is no upgrade path from Server 2012 Essentials to R2. R2 is not an upgrade, it is a new build. Essentials does not upgrade easily, you will want to perform a migration of the server. This will require additional hardware. You
can possibly backup the 2012 Essentials, build a temp server on workstation hardware just to do the migration from, restore the backup to the new server and then perform the migration to R2.

Best practices for upgrading Windows Server Essentials 2012 to R2?

Hi,
I need to upgrade my Windows Server Essentials 2012 on an HP microserver to Essentials R2 (specifically the R2 role on Standard rather than as a VM). After a reasonable amount of searching, I haven't found anything online that specifically addresses this in-place
upgrade scenario. Since this is already an Essentials server, it's the PDC in its own domain, etc. Has anyone that's done this upgrade have any experiences or warnings to share?
Thanks,
Sean

Hello there,
There is no upgrade path from Server 2012 Essentials to R2. R2 is not an upgrade, it is a new build. Essentials does not upgrade easily, you will want to perform a migration of the server. This will require additional hardware. You
can possibly backup the 2012 Essentials, build a temp server on workstation hardware just to do the migration from, restore the backup to the new server and then perform the migration to R2.

(Request for:) Best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC

Could you please share your best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC, that will be running on a new WinSrv 2012 r2 host server. (This
will be for a brand new network setup, new forest, domain, etc.)
Specifically, your best practices regarding:
the sizing of non virtual and virtual volumes/partitions/drives,
the use of sysvol, logs, & data volumes/drives on hosts & guests,
RAID levels for the host and the guest(s),
IDE vs SCSI and drivers both non virtual and virtual and the booting there of,
disk caching settings on both host and guests.
Thanks so much for any information you can share.

A bit of non essential additional info:
We are small to midrange school district who, after close to 20 years on Novell networks, have decided to design and create a new Microsoft network and migrate all of our data and services
over to the new infrastructure . We are planning on rolling out 2012 r2 servers with as much Hyper-v virtualization as possible.
During the last few weeks we have been able to find most of the information we need to undergo this project, and most of the information was pretty solid with little ambiguity, except for
information regarding virtualizing the DCs, which as been a bit inconsistent.
Yes, we have read all the documents that most of these posts tend point to, but found some, if not most are still are referring to performing this under Srvr 2008 r2, and haven’t really
seen all that much on Srvr2012 r2.
We have read these and others:
Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100),
Virtualized Domain Controller Technical Reference (Level 300),
Virtualized Domain Controller Cloning Test Guidance for Application Vendors,
Support for using Hyper-V Replica for virtualized domain controllers.
Again, thanks for any information, best practices, cookie cutter or otherwise that you can share.
Chas.

Best practice for install oracle 11g r2 on Windows Server 2008 r2

Dear all,
May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
Just grant Full for Administrators and System and remove permissions for all others accounts?
Also how should I configure windows firewall to allow client connect to the database.
Thanks for your help.

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Best practice for server configuration for iTunes U

Hello all, I'm completely new to iTunes U, never heard of this until now and we have zero documentation on how to set it up. I was given the task to look at best practice for setting up the server for iTunes U, and I need your help.
*My first question*: Can anyone explains to me how iTunes U works in general? My brief understanding is that you design/setup a welcome page for your school with sub categories like programs/courses, and within that you have things like lecture audio/video files and students can download/view them on iTunes. So where are these files hosted? Is it on your own server or is it on Apple's server? Where & how do you manage the content?
*2nd question:* We have two Xserve(s) sitting in our server room ready to roll, my question is what is the best method to configure them so it meets our need of "high availability in active/active mode, load balancing, and server scaling". Originally I was thinking about using a 3rd party load balancing device to meet these needs, but I was told there is no budget for it so this is not going to happen. I know there is IP Failover but one server has to sit in standby mode which is a waste. So the most likely scenario is to setup DNS round robin and put both xserves in active/active. My question now is (this maybe related to question 1), say that all the content data like audio/video files are stored by us, (We are going to link a portion of our SAN space to Xserve for storage), if we are going with DNS round robin and put the 2 servers in Active/Active mode, can both servers access a common shared network space? or is this not possible and each server must have its own storage space? And therefore I must use something like RSYNC to make sure contents on both servers are identical? Should I use XSAN or is RSYNC good enough?
Since I have no experience with iTunes U whatsoever, I hope you understand my questions, any advice and suggestion are most welcome, thanks!

Raja Kondar wrote:
wht is the Best Practice for having server pool i.e
1) having a single large serverpool consisting of "n" number of guest vm
2) having a multiple small serverpool consisting of less of number of guest vm I prefer option 1, as this gives me the greatest amount of resources available. I don't have to worry about resources in smaller pools. It also means there are more resources across the pool for HA purposes. Not sure if this is Official Best Practice, but it is a simpler configuration.
Keep in mind that a server pool should probably have up to 20 servers in it: OCFS2 starts to strain after that.

Best Practice for SUP and WSUS Installation on Same Server

Hi Folks,
I have a question, I am in process of deploying SCCM 2012 R2... I was in process of deploying Software Update Point on SCCM with one of the existing WSUS server installed on a separate server from SCCM.
A debate has started with of the colleague who says that the using remote WSUS server is recommended by Microsoft because of the scalability security that WSUS will be downloading the updates from Microsoft and SCCM should be working as downstream
server to fetch updates from WSUS server.
but according to my consideration it is recommended to install WSUS server on the same server where SCCM is installed... actually it is recommended to install WSUS on a site system and you can used the same SCCM server to deploy WSUS.
please advice me the best practices for deploying SCCM and WSUS ... what Microsoft says about WSUS to be installed on same SCCM server OR WSUS should be on a separate server then the SCCM server ???
awaiting your advices ASAP :)
Regards, Owais

Hi Don,
thanks for the information, another quick one...
the above mentioned configuration I did is correct in terms of planning and best practices?
I agree with Jorgen, it's ok to have WSUS/SUP on the same server as your site server, or you can have WSUS/SUP on a dedicated server if you wish.
The "best practice" is whatever suits your environment, and is a supported-by-MS way of doing it.
One thing to note, is that if WSUS ever becomes "corrupt" it can be difficult to repair and sometimes it's simplest to rebuild the WSUS Windows OS. If this is on your site server, that's a big deal.
Sometimes, WSUS goes wrong (not because of ConfigMgr)..
Note that if you have a very large estate, or multiple primary site servers, you might have a CAS, and you would need a SUP on the CAS. (this is not a recommendation for a CAS, just to be aware)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Best practice for saving data in SQL server

Hi all
Hoping for a little help on this question.
If i have a list of fields ex. (name,address,postal,phone etc.). Then i create a webform/task
to gather some of theese fields (name, postal), then i make another webform/task to gather some other fields (address, phone).
What is best practice in the SQL server for storing returning values.
Is it:
1. to make a table with all the fields in the list + taskid. Theese fields could be in
correct format (number, date etc.). And all answers to all tasks is inserted into this table.
2. Make a value table for each field with the correct type + task id. So all name values
are stored in the "name value table" with the task id.
How would i select values from a certain task from this kind of setup?
3. ??
Best regards
Bo

Hi Atul
Thanks for your reply, can you elaborate a bit further on this, since i am still a little confused.
Let me try to explain my scenario at bit more:
Say instead that it is 50 fields in a table with their own unique ID, maybe an answer table
would look like this:
taskid | field_1 | field_2 | field_3 | field 4 | field_n
So no matter which fields the user fillsout it will can be stored in one table.
QUestion is, is this a good way to do it? and how do i select from this table using a join
As far as i know you cant name columns in a table with just numbers, which would have been
great, giving the columnnames the field_id.
OR
Would you have 50 tables each with a field_id and a value (of correct type) ?
And could you give me an example of how to bind and select from this kind of structure ?
Also inserting into 50 tables on a save.... is that the right way to go? :)
Best regards
Bo

Best practice for licence server for RDS Farm & Certificate errors

Hello,
I am in the process of creating an RDS farm using Server 2008 R2. I have three Session Hosts and a Connection Broker.
I have a set of 10 user CALs available and also another 20 on our current RDS server which will need migrating once we go live with the farm.
I understand the User CALs need to be installed on another Server 2008 R2 and I am wondering what is best practice. We are running on an entirely virtual environment and it would be simple enough to create another server and install the CALs on there.
The only issue with that is that I would need to create a replica of this new machine for DR purposes, but this would take up valuable space which may not be necessary.
We are planning on creating replicas of one of the Session hosts and the broker for DR, so I am guessing I would need to install some CALs on the Session Host which is going to be replicated.
There are a few options and I am just wondering what is the best way to go about things.
Also, as an aside, I am getting an annoying certificate error each time I log a test user onto the RDS farm - I think this is because I am using the DNS alias of the RDS Farm to log on. Is there an easy way to get around this, other than the 'Do not show
this message again'. I have been doing some research and the world of Certificates is very confusing!!
Thanks,
Caroline
C.Rafferty

Hi Caroline,
Firstly for your License related issue, you can perform the step on any VM or can create the new VM as replica for RDSH server also. But please be sure that you have installed RD License server on it, activate it and then install RDS CAL on it. But be safe
if possible don’t install RD License server with RDCB, please make that out of it as little away. As you can also install RD License server with AD or make replica of that and install RDL on that.
Best practices for setting up Remote Desktop Licensing (Terminal Server Licensing) across Active Directory Domains/Forests or Workgroup
http://support.microsoft.com/kb/2473823
What’s the specified certificate error which you are receiving?
If you're going to allow users to connect externally and they will not be part of your domain, you would need to deploy certificates from a public CA. In meantime you can refer blog for getting insight for certificate case.
Certificate Requirements for Windows 2008 R2 and Windows 2012 Remote Desktop Services
http://blogs.technet.com/b/askperf/archive/2014/01/24/certificate-requirements-for-windows-2008-r2-and-windows-2012-remote-desktop-services.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Best Practice for a Print Server

Similar Messages

Maybe you are looking for