Best practice for audit management

Hi,
Is there any best practice for audit management in SAP ?

Hi,
You can check these links and white papers which explains the business scenarios and best practices
http://www50.sap.com/businessmaps/9AD1FC0540D0479CA76C4CA1EE9AF668.htm
http://www.sap.com/solutions/business-suite/erp/brochures/index.epx - "Audit management with SAP software".
Regards,
Keerthi

Similar Messages

What are the best practices for audit report for SharePoint 2013 farm ?

Hello,
I am looking for the best practices for audit reporting in SharePoint 2013 farm.Can anyone please provide me checklist/tools/guidelines on same ?
your help will be much appreciated.
Thanks and Regards,
Dipti Chhatrapati

This is quite open ended question. A sharepoint farm should be well maintained as per :
1. Microsoft's recommendations on : Topology, Hardware and Software requirements, Operational procedures and most important Capacity guidelines:
http://technet.microsoft.com/en-us/library/ff758645(v=office.15).aspx
http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx
2. Organisation's IT policies and procedures : Farm Configuration, Workload and monitoring
http://technet.microsoft.com/en-us/library/ff758658(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ee748651(v=office.15).aspx
3. Industry best practices
I would suggest to start thinking over these lines and create a plan for your Sharepoint farm.
You can then create powershell scripts to run these reports at certain frequency to find the changes, any deviation from the standard and health of the entire farm.
Hope this helps!!
I LOVE MS..... Thanks and Regards, Kshitiz (Posting is provided "AS IS" with no warranties, and confers no rights.)

Best Practices for Content Management

Hi All,
Could anybody suggest me what are the best practices for Content Management.
Regards,
Tom

Hi Rajan,
Even I want the same. I shall be very thankfull to you if you can send me also.
My mail ID is [email protected]
Best Regards,
Chamkaur
Message was edited by:
Chamkaur Brar

Best Practices for Configuration Manager

What all links/ documents are available that summarize the best practices for Configuration Manager?
Applications and Packages
Software Updates
Operating System Deployment
Hardware/Software Inventory

Hi,
I think this may help you
system center 2012 configuration manager best practices
SCCM 2012 task-sequence best practices
SCCM 2012 best practices for deploying application
Configuration Manager 2012 Implementation and Administration
Regards, Ibrahim Hamdy

JSF - Best Practice For Using Managed Bean

I want to discuss what is the best practice for managed bean usage, especially using session scope or request scope to build database driven pages
---- Session Bean ----
- In the book Core Java Server Faces, the author mentioned that most of the cases session bean should be used, unless the processing is passed on to other handler. Since JSF can store the state on client side, i think storing everything in session is not a big memory concern. (can some expert confirm this is true?) Session objects are easy to manage and states can be shared across the pages. It can make programming easy.
In the case of a page binded to a resultset, the bean usually helds a java.util.List object for the result, which is intialized in the constructor by query the database first. However, this approach has a problem: when user navigates to other page and comes back, the data is not refreshed. You can of course solve the problem by issuing query everytime in your getXXX method. But you need to be very careful that you don't bind this XXX property too many times. In the case of querying in getXXX, setXXX is also tricky as you don't have a member to set. You usually don't want to persist the resultset changes in the setXXX as the changes may not be final, in stead, you want to handle in the actionlistener (like a save(actionevent)).
I would glad to see your thought on this.
--- Request Bean ---
request bean is initialized everytime a reuqest is made. It sometimes drove me nuts because JSF seems not to be every consistent in updating model values. Suppose you have a page showing parent-children a list of records from database, and you also allow user to change directly on the children. if I hbind the parent to a bean called #{Parent} and you bind the children to ADF table (value="#{Parent.children}" var="rowValue". If I set Parent as a request scope, the setChildren method is never called when I submit the form. Not sure if this is just for ADF or it is JSF problem. But if you change the bean to session scope, everything works fine.
I believe JSF doesn't update the bindings for all component attributes. It only update the input component value binding. Some one please verify this is true.
In many cases, i found request bean is very hard to work with if there are lots of updates. (I have lots of trouble with update the binding value for rendered attributes).
However, request bean is working fine for read only pages and simple binded forms. It definitely frees up memory quicker than session bean.
----- any comments or opinions are welcome!!! ------

I think it should be either Option 2 or Option 3.
Option 2 would be necessary if the bean data depends on some request parameters.
(Example: Getting customer bean for a particular customer id)
Otherwise Option 3 seems the reasonable approach.
But, I am also pondering on this issue. The above are just my initial thoughts.

Any best practice for Key Management with Oracle Obfuscation?

Hi,
I was wondering if anyone is aware if there are any best practices regarding key management when using Oracle's DBMS_OBFUSCATION_TOOLKIT? I'm particularly interested in how we can protect the encryption/decryption key that we would use.
Thanks,
Jim

Oracle offers this document, which includes a strategy for what you're after:
http://download-west.oracle.com/docs/cd/B13789_01/network.101/b10773/apdvncrp.htm#1006234
-Chuck

What are the best practices for Database management and performance tuning?

Hello,
I want to ensure that I am using the best practices for managing and maintaining our Database.
Is there any documentation out there that outlines how to maintain and ensure top performance out of our database?
Thank you!
John Sefton

I appreciate the responses, however this is not the information I am looking for.
I am specificaly looking for best practices invloving the managment and performance tuning.
Example: are their tools that I can install that will monitor the size and response time of the database and alert me if there is degradation in performance?
Are there specific periodic activities I should be doing to garuntee that my database will continue to function that way it is supposed to?
Or is this a fire and forget solution that does not need this attention?

What is best practice for remotely managing bank of switches over POTS

I need to be able to have a back door into several catalyst switches and ASA.
What is the best practice for accessing them remotely. ?

Just place a modem into any console port. Ideally you use a terminal server, but is not always really needed.

Best practice for window management

Hi all,
I'm pretty new at flex and I have to develop an application.
I don't know yet what the best practices are to have a consistent layout and code
- The program must have different views (scheduling, settings, adminwindow, ....)
What is the best way to switch between these views? Should I use a tabbar or a buttonbar?
- What should a view be made off? Should I use different states, or should I switch between windows, or use something else?
That's it for now, thanks all.
Greets me
btw, I try to use spark as much as possible..

Hi,
You can check these links and white papers which explains the business scenarios and best practices
http://www50.sap.com/businessmaps/9AD1FC0540D0479CA76C4CA1EE9AF668.htm
http://www.sap.com/solutions/business-suite/erp/brochures/index.epx - "Audit management with SAP software".
Regards,
Keerthi

Best Practice for certificate management for security

We have been working on moving toward future implementation of document encryption and electronic signatures using Adobe Acrobat 9 Standard. I have read 21 CFR 11, and accompanying guidances. Are there any best practice recommendations for how to meet these standards using this technology?
There are some requirements that I am unsure of how to best implement.
How should we document that we have verified the identity of the individual?
How should we periodically force revision of passwords, or document that this is done since no one knows each other’s passwords?
How should we manage certifications so that we can show we deactivate obsolete ones?
How do we monitor to detect attempts at unauthorized access/use of electronic signatures?
If our organization wants to become our own certification authority, what documentation do we need or process should we use to validate our certificates?

Hi Shadya10,
Those are some pretty big questions! I'm not saying that your company can't become a CA because obviously there are companies that have, but this is almost something that happens at the state level if your not already intimate with PKI. Just from the tenor of your questions I'd suggest you contract with a reputable, existing CA to provide your PKI infrastructure. I could explain key management and how revocation checking works, but really if you're asking in an Adobe forum this is way more than you want to be dealing with.
If you're really interested you need to start with reading RFC 5280.
Steve

GRC best practice for solution manager

Hi
We wanted to know if there is a content of GRC road map and processes for the solution manager project management solution? we can't find the source from which we can download it strait to the solution manager same as downloading the roadmap and processes of best practices in modules like CO, FI etc.
Does anyone know from where to download the solman GRC best practice?
Best Regards,
Shira

Hi Shira,
what is only currently available for the GRC topic is an implementation roadmap for grc. You can find that on service marketplace under http://service.sap.com/asap
Best regards,
Frank

Best Practice for installing/managing 9i/10g RAC

Looking for this notes/articles...

There is one best practice document available from Oracle RACSIG site and "Oracle Real Applicaiton Cluster Administration and Deployment Guide" available on OTN is also good source of informaiton about 10g RAC.
Oracle has made sincere efforts in 10g documentations expecially in server technology.
Thanks & Regards

Best practice for auditing a SP 2010 BCS scenario with a SQL Server pooled connection.

I'm using SP 2010 BCS to connect to a SQL Server db. For this, I've used SSS and am passing SQL credentials to take advantage of pooled connections. I'd like to pass the user context (user ID/User name) to the database so that I can do auditing, such as
created by and last modified by. What is the best approach to make this work while still using a pooled connection?
I've thought about modifying the external list forms so that I capture and pass down user context info, however, I'd like not to rely on this in case the external content type is consumed by another consumer such as an Office product, etc.

Hi,
There is no good way to do it.
You can set the created by and modified by columns as input parameters for the create and update operations and using ajax to set values for both of columns.
http://troyscott.ca/2010/07/17/creating-an-update-operation-for-an-external-content-type/
Regards,
Seven

Best practice for Auditing

Hello,
I use APEX 4.2.2.... Oracle 11.2.0.3.
I need to log all changes on many tables. e.g :
for a given column : old_value , new_value, updated_on , updated_by.
I noticed in Check list Manager Packaged application there is a trigger EBA_CM_CHECKLIST_ROWS_BIU to accomplish that goal.
Is there any tool to generate this kind of triggers ???
I have just started readying about FGA. Is it better to accomplish that task with FGA in APEX environment ??
Regards,

Using Oracle Flashback Technology
You need to be on Enterprise Edition and patch it to 11.2.0.4
"Total Recall" is a free feature as of 11.2.0.4 and 12c+.
Prior to that, it is a paid add-on.
An "Audit Report" will use the 'VERSIONS BETWEEN' SQL clause similar to:
SELECT
VERSIONS_STARTTIME, VERSIONS_ENDTIME, VERSIONS_OPERATION -- part of VERSIONS BETWEEN
,{other columns}
FROM T
VERSIONS BETWEEN TIMESTAMP to_timestamp( <date/time that you turned it on> )
AND SYSTIMESTAMP
WHERE T_PK = :P26_T_PK
I put mine in a VIEW (without the WHERE clause...).
In addition to 'auditing', it will also allow the "Flashback" feature of Interactive Reports to go back as far as {the date/time you turned it on}.
MK

Best Practices for File Management

I just wrote post about how I use Lightroom, Dropbox, and Crashplan to manage my photos. I'm curious if anyone here has a critique for my approach. I'm not a "pro" by any measure, so I'm not sure if this is a good approach, or if there are better ways to accomplish the same thing. In general, I just want a highly reliable, low pain workflow for keep track of my files. Thanks for any feedback you have!

Looks good - I run an almost identical system for my personal photos, using the same programs.

Best practice for audit management

Similar Messages

Maybe you are looking for