Best practice for handling custom apps tracks with regards to EP upgrade?

Hi,
We've are currently in the progress of upgrading from EP 6 to EP 7.0, and in that context we need to "move" our tracks containg development of custom J2EE components.
What we've done so far is :
1.Create a new version 7.00 of each software component we have developed with correct EP 7 dependencies
2. Create a new version 7.00 of our product in the SLD: Bouvet_EP
3. Attached the new versions of the SCs to the new product version
4. Create a new track with the SC of version 7.00 along with relevant dependencies
My question now is how do we get the EP 6 component source code into the new track, so that we can change dependecies of the DCs and build it again for EP 7.0?
Should we somehow export the code from the old track, check in and transport ? (how do we then export the code from the track)
Regards
Dagfinn

Hi Dagfinn,
This is a really interesting thread. I have not encountered this scenario till now. However i can only guess.
1. Copy the latest sca files generated for all the SC's in your track from one of the subdirectories of JTrans and place those sca files in the inbox directory of target CMS. Check if these sca are available in the Check-in tab. I think this will not work because the SC verion you have defined in SLD for WAS 7.0 is different than the one in SLD for WAS 6.40.
2. Second and crude method may be you create a SC in the source SLD similar to ones created in target SLD. Create a track for these SC's in the source system. Then create a track connection between the newly created track and existing tracks. Forward all the sources to the target track. Then assemble this SC and copy the sca file and repeat the process above.
I dont know. Possibly this may click. Notes 877029 & 790922 also give some hints on migration of JDI server.
Please do keep this thread updated with your progress.
Regards
Sidharth

Similar Messages

Best practices for setting up RDS pool, with regards to profiles /appdata

All,
I'm working on a network with four physical sites and currently using a single pool of 15 RDS servers with one broker. We're having a lot of issues with the current deployment, and are rethinking our strategy. I've read a lot of conflicting information on how
to best deploy such a service, so I'd love some input.
Features and concerns:
Users connect to the pool from intranet only.
There are four sites, each with a somewhat different local infrastructure. Many users are connecting to the RDS pool via thin clients, although some locations have workstations in place.
Total user count that needs to be supported is ~400, but it is not evenly distributed - some sites have more than others.
Some of the users travel from one site to another, so that would need to be accounted for with any plans that involve carving up the existing pool into smaller groups.
We are looking for a load-balanced solution - using a different pool for each site would be acceptable as long as it takes #4 and #7,8 into account.
User profile data needs to be consistent throughout: My Docs, Outlook, IE favorites, etc.
Things such as cached IE passwords (for sharepoint), Outlook settings and other user customization needs to be carried over as well.
As such, something needs to account for the information in AppData/localroaming, /locallow and /local between these RDS servers.
Ideally the less you have to cache during each logon the better, in order to reduce login times.
I've almost never heard anything positive about using roaming profiles, but is this one of those rare exceptions? Even if we do that, I don't believe that covers the information in <User>/AppData/* (or does it?), so what would be the best
way to make sure that gets carried over between sessions inside the pool or pools?
The current solution involves using 3rd party apps, registry hacks, GPOs and a mashup of other things and is generally considered to be a poor fit for the environment. A significant rework is expected and acceptable. Thinking outside the box is fine!
I would relish any advice on the best solutions for deployment! Thank you!

Hi Ben,
Thank you for posting in Windows Server Forum.
Please check below blogs and document which helps to understand some basic requirement and to setup the new environment with proper guided manner.
1. Remote Desktop Services Deployment Guide
(Doc)
2. Step by Step Windows 2012 R2 Remote Desktop Services –
Part 1, 2,3 & 4
3.Deploying a 2012 / 2012R2 Remote Desktop Services (RDS) farm
Hope it helps!
Thanks.
Dharmesh Solanki

Best Practice for Handling Timeout

Hi all,
What is the best practice for handling timeout in a web container?
By the way, we have been using weblogic 10.3
thanks

Are you asking about this specific to web services, or just the JEE container in general for a web application?
If a web application, Frank Nimphius recently blogged a JEE filter example that you could use too:
http://thepeninsulasedge.com/frank_nimphius/2007/08/22/adf-faces-detecting-and-handling-user-session-expiry/
Ignore the tailor fitted ADF options, this should work for any app.
CM.

What is the best practice for using the Calendar control with the Dispatcher?

It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security. However, the Calendar relies on this endpoint to build the events for the calendar. On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works. We've noticed the same behavior on the Geometrixx site.
What is the best practice for using the Calendar control with Dispatcher?
Thanks in advance.
Scott

Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
Example: http://www.cariboowoodshop.com/wood-shop.html

Best practices for handling elements and symbols (including preloading)

I am trying to learn Edge Animate and I have not seen enough animations to know how this is typically handled and I searched the forum and have not found an answer either.
If you have many different elements and symbols for a project, what is the best practice for having them appear, disappear, etc. on the timeline? I ask this question not only from a performance based perspective, but also keeping in mind the idea of preloading. This is a 2 part question:
Part 1: Using elements and symbols later in the timeline:
Since artwork is always imported directly to the stage in an "always on" status, should we place a visibility OFF on every item until we need it?
or should they be opacity 0 until I need them?
or should they be set to visibility hidden until I need them?
Which of these is the best option if you don't want the element / symbol visible until later in the timeline? Does it matter?
Part 2: Impact on page loading
Does the above question have any impact upon page loading speed
or is this something handled in preloading?
or do you need to make a special preloader?
Thanks for the help.

Hi, escargo-
Good questions!
Part 1: Using elements and symbols later in the timeline:
Since artwork is always imported directly to the stage in an "always on" status, should we place a visibility OFF on every item until we need it?
or should they be opacity 0 until I need them?
or should they be set to visibility hidden until I need them?
Which of these is the best option if you don't want the element / symbol visible until later in the timeline? Does it matter?
I would recommend that you set your visibility to "off" instead of simply changing the opacity. The reason I suggest this is that when your visibility is set to off, your object's hit points also disappear. If you have any type of interactivity, having the object still visible but with 0 opacity will interfere with anything you have underneath it in the display order.
Part 2: Impact on page loading
Does the above question have any impact upon page loading speed
or is this something handled in preloading?
or do you need to make a special preloader?
Thanks for the help.
No, none of this has any impact on page load. As you already noticed, all of the assets of your project will load before it displays. If you want only part of your composition to load, you may want to do what we call a multi-composition project. There's a sample of that in the Edge Animate API in the Advanced section, and plenty of posts in the forums (and one in the team's blog) explaining how to do that.
http://www.adobe.com/devnet-docs/edgeanimate/api/current/index.html
https://blogs.adobe.com/edge/
Hope that helps!
-Elaine

Best practices for 2 x DNS servers with 2 x sites

I am curious if someone can help me with best practices for my DNS servers. Let me give my network layout first.
I have 1 site with 2 x Windows 2012 Servers (1 GUI - 10.0.0.7, the other CORE - 10.0.0.8) the 2nd site connected via VPN has 2 x Windows 2012R2 Servers (1 GUI - 10.2.0.7, the other CORE - 10.2.0.8) All 4 servers are promoted to DC's and have DNS services
running.
Here goes my questions:
Site #1
DC-01 - NIC IP address for DNS server #1 set to 10.0.0.8, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.2.0.7 & 10.2.0.8)
DC-02 - NIC IP address for DNS server #1 set to 10.0.0.7, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.2.0.7 & 10.2.0.8)
Site #2
DC-01 - NIC IP address for DNS server #1 set to 10.2.0.8, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.0.0.7 & 10.0.0.8)
DC-02 - NIC IP address for DNS server #1 set to 10.2.0.7, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.0.0.7 & 10.0.0.8)
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local
> properties > Name Servers should I have all of my other DNS servers, or should I have my WAN DNS servers? In a single server scenario I always put my WAN DNS server but a bit unsure in this scenario.
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local > properties > General > Type should all servers be set to
Active Directory - Integrated > Primary Zone? Should any of these be set to
Secondary Zone?
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local > properties > Zone Transfers should I allow zone transfers?
Would the following questions be identical to the Forward Lookup Zone mydomain.local as well?

I am curious if someone can help me with best practices for my DNS servers. Let me give my network layout first.
I have 1 site with 2 x Windows 2012 Servers (1 GUI - 10.0.0.7, the other CORE - 10.0.0.8) the 2nd site connected via VPN has 2 x Windows 2012R2 Servers (1 GUI - 10.2.0.7, the other CORE - 10.2.0.8) All 4 servers are promoted to DC's and have DNS services
running.
Here goes my questions:
Site #1
DC-01 - NIC IP address for DNS server #1 set to 10.0.0.8, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.2.0.7 & 10.2.0.8)
DC-02 - NIC IP address for DNS server #1 set to 10.0.0.7, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.2.0.7 & 10.2.0.8)
Site #2
DC-01 - NIC IP address for DNS server #1 set to 10.2.0.8, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.0.0.7 & 10.0.0.8)
DC-02 - NIC IP address for DNS server #1 set to 10.2.0.7, DNS server #2 set to 127.0.0.1 (should I add my 2nd sites DNS servers under Advanced as well? 10.0.0.7 & 10.0.0.8)
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local
> properties > Name Servers should I have all of my other DNS servers, or should I have my WAN DNS servers? In a single server scenario I always put my WAN DNS server but a bit unsure in this scenario.
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local > properties > General > Type should all servers be set to
Active Directory - Integrated > Primary Zone? Should any of these be set to
Secondary Zone?
Under the DNS management > Forward Lookup Zones > _msdcs.mydomain.local > properties > Zone Transfers should I allow zone transfers?
Would the following questions be identical to the Forward Lookup Zone mydomain.local as well?
Site1
DC1: Primary 10.0.0.7. Secondary 10.0.0.8. Tertiary 127.0.0.1
DC2: Primary 10.0.0.8. Secondary 10.0.0.7. Tertiary 127.0.0.1
Site2
DC1: Primary 10.2.0.7. Secondary 10.2.0.8. Tertiary 127.0.0.1
DC2: Primary 10.2.0.8. Secondary 10.2.0.7. Tertiary 127.0.0.1
The DC's should automatically register in msdcs. Do not register external DNS servers in msdcs or it will lead to issues. Yes, I recommend all zones to be set to AD-integrated. No need to allow zone transfers as AD replication will take care
of this for you. Same for mydomain.local.
Hope this helps.

Best Practices for Integrating UC-5x0's with SBS 2003/8?

Almost all of Cisco's SBCS market is the small and medium business space. Most, if not all of these SMB's have a Microsoft Small Business Server 2003 or 2008. It will be critical, In order for Cisco to be considered as a purchase option, that the UC-5x0 integrates well into these networks.
To that end, I see a lot of talk here about how to implement parts and pieces of this, but no guidance from Cisco, no labs and no best practices or other documentation. If I am wrong, please correct me.
I am currently stumbling through and validating these configurations myself, Once complete, I will post detailed recommendations. However, it would have been nice to have a lab to follow instead of having to learn from each mistake.
Some of the challanges include;
1. Where should the UC-540 be placed: As the gateway for QOS or behind a validated UC-5x0 router/security appliance combination
2. Should the Microsoft Windows Small Business Server handle DCHP (as Microsoft's documentation says it must), or must the UC-540 handle DHCP to prevent loss of features? What about a DHCP relay scheme?
3. Which device should handle DNS?
My documentation (and I recommend that any Cisco Lab/Best Practice guidence include it as well) will assume the following real-world scenario, the same which applies to a majority of my SMB clients;
1. A UC-540 device utilizing SIP for the cost savings
2. High Speed Internet with 5 static routable IP addresses
3. An existing Microsoft Small Business Server 2003/8
4. An additional Line of Business Application or Terminal Server that utilizes the same ports (i.e. TCP 80/443/3389) as the UC-540 and the SBS, but on seperate routable IP's (Making up crazy non-standard port redirections is not an option).
5. A employee who teleworks from various places that provide a seat and a network jack, which is not under our control (i.e. a employees home, a clients' office, or a telework center). This teleworker should use the built in VPN feature within the SPA or 7925G phones because we will not have administrative access to any third party's VPN/firewall.
Your thoughs appreciated.

Progress Report;
The following changes have been made to the router in support of the previously detailed scenario. Everything appears to be working as intended.
DHCP is still on the UC540 for now. DNS is being performed by the SBS 2008.
Interestingly, the CCA still works. The NAT module even shows all the private mapped IP's, but no the corresponding public IP's. I wouldnt recommend trying to make any changes via the CCA in the NAT module.
To review, this configuration assumes the following;
1. The UC540 has a public IP address of 4.2.2.2
2. A Microsoft Small Business Server 2008 using an internal IP of 192.168.10.10 has an external IP of 4.2.2.3.
3. A third line of business application server with www, https and RDP that has an internal IP of 192.168.10.11 and an external IP of 4.2.2.4
First, backup your current configuration via the CCA,
Next, telent into the UC540, login, edit, cut and paste the following to 1:1 NAT the 2 additional public IP addresses;
ip nat inside source static tcp 192.168.10.10 25 4.2.2.3 25 extendable
ip nat inside source static tcp 192.168.10.10 80 4.2.2.3 80 extendable
ip nat inside source static tcp 192.168.10.10 443 4.2.2.3 443 extendable
ip nat inside source static tcp 192.168.10.10 987 4.2.2.3 987 extendable
ip nat inside source static tcp 192.168.10.10 1723 4.2.2.3 1723 extendable
ip nat inside source static tcp 192.168.10.10 3389 4.2.2.3 3389 extendable
ip nat inside source static tcp 192.168.10.11 80 4.2.2.4 80 extendable
ip nat inside source static tcp 192.168.10.11 443 4.2.2.4 443 extendable
ip nat inside source static tcp 192.168.10.11 3389 4.2.2.4 3389 extendable
Next, you will need to amend your UC540's default ACL.
First, copy what you have existing as I have done below (in bold), and paste them into a notepad.
Then, im told the best practice is to delete the entire existing list first, finally adding the new rules back, along with the addition of rules for your SBS an LOB server (mine in bold) as follows;
int fas 0/0
no ip access-group 104 in
no access-list 104
access-list 104 remark auto generated by SDM firewall configuration##NO_ACES_24##
access-list 104 remark SDM_ACL Category=1
access-list 104 permit tcp any host 4.2.2.3 eq 25 log
access-list 104 permit tcp any host 4.2.2.3 eq 80 log
access-list 104 permit tcp any host 4.2.2.3 eq 443 log
access-list 104 permit tcp any host 4.2.2.3 eq 987 log
access-list 104 permit tcp any host 4.2.2.3 eq 1723 log
access-list 104 permit tcp any host 4.2.2.3.35 eq 3389 log
access-list 104 permit tcp any host 4.2.2.4 eq 80 log
access-list 104 permit tcp any host 4.2.2.4 eq 443 log
access-list 104 permit tcp any host 4.2.2.4 eq 3389 log
access-list 104 permit udp host 116.170.98.142 eq 5060 any
access-list 104 permit udp host 116.170.98.143 any eq 5060
access-list 104 deny   ip 10.1.10.0 0.0.0.3 any
access-list 104 deny   ip 10.1.1.0 0.0.0.255 any
access-list 104 deny   ip 192.168.10.0 0.0.0.255 any
access-list 104 permit udp host 116.170.98.142 eq domain any
access-list 104 permit udp host 116.170.98.143 eq domain any
access-list 104 permit icmp any host 4.2.2.2 echo-reply
access-list 104 permit icmp any host 4.2.2.2 time-exceeded
access-list 104 permit icmp any host 4.2.2.2 unreachable
access-list 104 permit udp host 192.168.10.1 eq 5060 any
access-list 104 permit udp host 192.168.10.1 any eq 5060
access-list 104 permit udp any any range 16384 32767
access-list 104 deny   ip 10.0.0.0 0.255.255.255 any
access-list 104 deny   ip 172.16.0.0 0.15.255.255 any
access-list 104 deny   ip 192.168.0.0 0.0.255.255 any
access-list 104 deny   ip 127.0.0.0 0.255.255.255 any
access-list 104 deny   ip host 255.255.255.255 any
access-list 104 deny   ip host 0.0.0.0 any
access-list 104 deny   ip any any log
int fas 0/0
ip access-group 104 in
Lastly, save to memory
wr mem
One final note - if you need to use the Microsoft Windows VPN client from a workstation behind the UC540 to connect to a VPN server outside your network, and you were getting Error 721 and/or Error 800...you will need to use the following commands to add to ACL 104;
(config)#ip access-list extended 104
(config-ext-nacl)#7 permit gre any any
Im hoping there may be a better way to allowing VPN clients on the LAN with a much more specific and limited rule. I will update this post with that info when and if I discover one.
Thanks to Vijay in Cisco Tac for the guidence.

Best practice for oracle 10.2 RAC with ASM

Did any one tried/installed Oracle 10.2 RAC with ASM and CRS ?
What is the best practice?
1. separate home for CRS, ASM and Oracle Database?
2. separate home for CRS and same home for ASM and Oracle Darabase?
we set up the test environment with separate CRS, ASM and Oracle database homes, but we have tons of issues with the listener, spfile and tnsnames.ora files. So, seeking advise from the gurus who implimeted/tested the same ?

I am getting ready to install the 10gR2 database software (10gR2 Clusterware was just installed ) and I want to have a home for ASM and another for database as you suggest. I have been told that 10gR2 was to have a smaller set of binaries that can be used for the ASM home ... but I am not sure how I go about installing it. The first look at the installer does not seem to make it obvious...Is it a custom build option?

Best practice for handling errors in EOIO processing on AEX?

Hi,
I'm looing for resources and information describing the best practice on how to handle processing errors of asynchronous integrations with Exactly-Once-In-Order QoS on an AEX (7.31) Java only installation. Most information I've found so far are describing a the monitoring and restart jobs on AS ABAP.
Situation to solve:
multiple different SOAP messages are integrated using one queue with an RFC receiver. On error the message status is set to Holding and all following messages are Waiting. Currently I need to manually watch over the processing, delete the message with status holding and restart the waiting ones.
Seems like I can setup component based message alerting to trigger an email or whatever alert. I still need to decide on how to handle the error and resolve it (ie. delete the errornous message, correct the data at sender and trigger another update). I still need to manually find the oldest entry with status waiting and restart it. I've found a restart job in Background jobs in configuration and monitoring home, but it can be only scheduled in intervals of 1 or more hours.
Is there something better?
Thank you.
Best regards,
Nikolaus

Hi Nikolaus -
AFAIK - For EOIO, you have to cancel the failed message and then process the next message in the sequence manually..
Restart job only works the messages which are in error state but not in holding state.. So you have to manually push the message... So there is no other alternative.
But it should not be that difficult to identify the messages in a sequence..
How to deal with stuck EOIO messages in the XI ... | SCN
Though it is for older version, it should be the same.. you should be able to select the additional columns such as sequence ID from the settings..

User Authorization, best practices for this custom application requirement?

JDeveloper 12c (12.1.2)
We want to use external LDAP (active directory) with ADF security to authenticate and authorize users.
One of our custom application requirements is that there is a single page with many interactive components. It has probably about 15 tables and each table would need to have the following buttons (or similar components):
- delete: (if certain row is selected) to delete it
- edit: (if certain row is selected) takes user to 'edit page' where changes can be made
- create: to create new record for this particular VO (table)
So let's say that would be 3 x 15 = 45 different actions that single user can possibly perform. Not all users have same 'powers' ie some users can only edit CERTAIN tables, and delete from one or two. Most users can create and edit most VOs etc
Back when this application was originally developed using (I believe) 10g JDeveloper with UIX, the way it was done is that we maintained a table in database with 'user credentials' as Y or N flags.
For example: DEL_VO1, EDIT_VO1, ADD_VO1....
So when user is authenticated we would then pull all these credentials from the DB table and load them into the session variables. Then we would use EL to render or not render certain buttons on the page. For example: rendered="#{sessionScope.appDelVo1 == 'Y'}"
Moving forward into latest ADF technology, what would be the best practice to achieve described functionality?

Hi,
ADF BC could have permissions added to the entity level (includes remove and update). So you can create permissions for the entity (as it doesn't matter for data security how data is accessed. If as a user you are nit allowed to change a database table then this is for tables and forms). You can then use EL to check the permission, thus no need to keep the privileges in the database.
If a user is allowed to update an entity then you can check this using EL in the UI
<af:inputText value="#{bindings.DepartmentName.inputValue}"
readOnly="#{!bindings.DepartmentName.hints.updateable}">
whatch this for a full coverage of ADF Security: Oracle ADF Security Overview - Oracle JDeveloper 11g R1 and R2
Frank

Best practice to develop internet app integrating with backend R/3 modules

While we wait to upgrade from R/3 4.6c, going forward we want to stop investing in ITS Flow Logic applications.
What is the best practice around using backend RFCs/BAPIs to expose SAP functionality as a web application that is accessible on the internet? One thought looks like using WAS 6.4 - utilizing JRA to call RFCs and using JSP/Servlet; another is to use Webdynpro based development. Will appreciate some architecture advice along side - especially if we also wanted internet surfers to set up user accounts. Thanks!

Hi Vito,
I do have the same situation as you and also some of the guys mentioned above as well. I have Portal only users and also users who uses the SAP GUI.
Thus, what I would advise, taking into consideration of audit as well, is to have the below scenerios:
1) Users who login to backend with SAP GUI on Citrix only
We have changed the system parameter: login/password_change_for_SSO=2
The password change dialog box appears and the password must be changed (input: old and new password). Also we have setup SNC (CyberSafe) so that in our SAP GUI, users can click on the system with SNC setup and login to backend without having to enter userID and password
2) Users who login to backend with SAP GUI on client (local)
Users will login with userID and password
3) Portal user with SSO and no login to backend vwith SAP GUI
Portal users will have their password deactivated.
Explaination to Audit for Portal users:
We have 90days password reset on Windows (AD). So our Portal users are respecting the audit request of having 90days password reset, but instead of having it in SAP, its in our Windows. Furthermore, SSO is setup as such that the coinnection for these Portal users to the backend is secure.
We are not able to set login/password_change_for_SSO=3 as we have sites which does not use Citrix. Thus, these sites will have local SAP GUI install.
Hope that can share some experience of mine to those who are also in my past situation.
Ray

Best practice for universal iOS app? swf or swc?

Hi,
I'm trying to map out a framework for my assets which helps keep the memory load low at runtime for an iOS universal app and ran across the following article regarding swc files.
http://www.flashrealtime.com/compiling-big-air-swf-to-ios/
However, it's unclear as to how this method would be beneficial from a memory standpoint. Don't the files still get loaded at runtime?
Or should I be looking at swf files with the code stripped out and referenced from the main swf in the ipa? (sounds like more work!)
Please help educate a noob!
Thanks!

Thanks for the reply, Dave!
What I'm trying to figure out is the best way to achieve a fast load time for a universal app and was hoping I'd be able to instantiate only the necessary swc files as needed along with their appropriately linked classes. (swc#1 for iPhone 3G bitmaps and MovieClips, swc#2 for iPhone4S, etc...) Seems this isn't possible now.
Anyone have some favorite they can share for fast app loads?
Thoughts on universal apps in general? I'm thinking maybe this isn't a good path anymore considering the beefy high-res screen on the new iPad...

Any Best Practices for developing custom ABAP reports for Portal?

Hello,
The developers on our project are debating the best way to develop custom reports and make them available on the portal. Of these options that we can think of, can you give any pros & cons, or experiences, or other options?
- Web-enabled Abap report programs
- WebDynpro for Abap
- WebDynpro for Abap using ALV
- Adobe forms
Does a "Best Practices" document or blog exist on this topic?
Thanks,
Colleen

Re: Using p_trace=YES

Best practices for a development/production scenario with ORACLE PORTAL 10G

Hi all,
we'd like to know what is the best approach for maintaining a dual development/production portal scenario. Specially important is the process of moving from dev. to prod. and what it implies in terms of portal availability in the production environment.
I suppose the best policy to achieve this is to have two portal instances and move content via transport sets. Am I right? Is there any specific documentation about dev/prod scenarios? Can anybody help with some experiences? We are a little afraid regarding transport sets, as we have heard some horror stories about them...
Thanks in advance and have a nice day.

It would be ok for a pair of pages and a template.
I meant transport sets failed for moving an entire pagegroup (about 100 pages, 1Gb of documents).
But if your need only deals with a few pages, I therefore would direclty developp on the production system : make a copy of the page, work on it, then change links.
Regards

Best Practices for Handling queries for searching XML content

Experts: We have a requirement to get the count of 4 M rows from a specific XML tag with value begins with, I have a text index created but the query is extremely slow when I use the contains operator.
select count(1) from employee
where
contains ( doc, 'scott% INPATH ( /root/element1/element2/element3/element4/element5)') >0
what is oracle's best practices recommendation to query / index such searches?
Thanks

Can you provide a test case that shows the structure of the data and how you've generated the index? Otherwise, the generic advice is going to be "use prefix indexing".

Best practice for handling custom apps tracks with regards to EP upgrade?

Similar Messages

Maybe you are looking for