Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Similar Messages

Best practice for install oracle 11g r2 on Windows Server 2008 r2

Dear all,
May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
Just grant Full for Administrators and System and remove permissions for all others accounts?
Also how should I configure windows firewall to allow client connect to the database.
Thanks for your help.

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Requeriments OS for installation Oracle 11g RAC in Windows 2003

I plan to install Oracle 11g Standard with RAC in Windows 2003 Server.
I will use 2 nodes with the same OS.
I will use a SAN with fibre channel, to store the DB.
It is possible to install Oracle RAC in W2003 Standard ?
I need obligatory W2003 Enterprise?
The cluster of the 2 nodes is made by OS or by Oracle Clusterware?
Thanks in advance.

You can install on Windows 2003 Standard, it works with this OS. On the other hand the cluster is configured by the oracle clusterware. You need to make absolutely sure you are able to write from both nodes to the shared storage. Specific details on the regedit parameters you have to configure and specific OS issues are detailed at the above reference Werner posted.
~ Madrid

Install and uninstall of Oracle 11g R2 on Windows 2008 Server

Hi,
I installed Oracle 11g R2 and set up a database on Windows 2008 Server following the steps in the Installation Guide and it was successful. After uninstalling the product and doing a re-install, the step to configure the Net Configuration Assistant fails with the following msg.
Failed to allocate port(s) in the specified range(s) for the following process(es): JMS
[5540-5559], RMI [5520-5539], Database Control [5500-5519], EM Agent [3938] | [1830-1849]
Also, when I ran "netca.bat" and tried to reconfigure the Listener, it indicated the default port 1521 is being used. I ran "netstat -an" and do not see the port listed.
Questions:
What is the best way to check if something was leftover from my previous install of Oracle that is using the default ports?
What do I need to do to ensure a re-install is successful?
Uninstalling Oracle -
1.     Log in as the Administrator.
2.     Stop all Oracle Services.
3.     From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4.     Delete the C:\app\oracle directory.
5.     Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

Johan, after I uninstalled Oracle, I checked to ensure there were no remaining Oracle services remaining.
Srini, below are the steps I followed to uninstall Oracle. In step 3, I just ran deinstall.bat without any parameters and provided required information as prompted. Note, I uninstalled using the Administrator user and not the "oracle" account that I used to install Oracle.
Uninstalling Oracle -
1. Log in as the Administrator.
2. Stop all Oracle Services.
3. From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4. Delete the C:\app\oracle directory.
5. Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

How to create listener in 11g RAC on windows 2008 server

Dear All,
i worked on win 2003 and linux 4, 5 too. i have installed oracle RAC on both windows and linux.
now i have installed oracle RAC11gR1 on windows 2008 server.than installed oracle software . now i want to create listener from db_home which i am facing problem.
i m starting netca from db_home. following the insturction when i finishing it , the proces get started but in the middle is showing the listener on node1 and node2 can't be created.
please guid me how i willl be able to creat it.
2nd poing how to create asm instance on RAC11gR1. is it need to install saparate home like 10g for that or i can create from 11g software home.
thanks,
sher khan

thanks for the update ,
dear oracle 11g rac recomends to create ocr and voting disk on asm.
i followed the documents they are saying you have to install grid control infrastructure and than need to create asmcfs.(automatic storage management cluster file system.).
how to create asmcfs to avoid the gridcontrol, if its must is it need to install on one node or both nodes.
can you plz guide me how to do this .
thanks,

Oracle 11g RAC on Windows 2008 R2 VMware EXS 3.5 virtual machines

Hi,
We are planning to Install Oracle 11g R2 RAC on two VMware EXS 3.5 Windows 2008 R2 servers.
Having trouble while assigning the storage to the servers, the Raw Device Mapping feature in the VMware is greyed out and we cannot assign the disks to the Virtual servers, the disks are allocated to the Vmware Host machine from the SAN (HP EVA).
Please guide me the best approach for the RAC configuration on VMware EXS 3.5 Win 2008 R2 Guest servers.
any help will be highly appreceiated.
Thanks.

Hi,
Is this implementation to production environment?
Be aware:
Is Oracle RAC on VMware supported? No, we do not support Oracle Software including Oracle RAC on VMWare.
Aside from the support restrictions for the database on VMWare outlined in Metalink Note 249212.1, there are technical restrictions that prevent the certification of Oracle RAC in a VMWare environment.
*RAC: Frequently Asked Questions [ID 220970.1]*
Having trouble while assigning the storage to the servers, the Raw Device Mapping feature in the VMware is greyed out and we cannot assign the disks to the Virtual servers, the disks are allocated to the Vmware Host machine from the SAN (HP EVA).Check if below can help you.
http://vmzare.wordpress.com/2007/02/19/vmware-raw-device-mappingrdm/
Regards,
Levi Pereira

Best practice for integrating oracle atg with external web service

Hi All
What is the best practice for integrating oracle atg with external web service? Is it using integration repository or calling the web service directly from the java class using a WS client?
With Thanks & Regards
Abhishek

Using Integration Repository might cause performance overhead based on the operation you are doing, I have never used Integration Repository for 3rd Party integration therefore I am not able to make any comment on this.
Calling directly as a Java Client is an easy approach and you can use ATG component framework to support that by making the endpoint, security credentials etc as configurable properties.
Cheers
R
Edited by: Rajeev_R on Apr 29, 2013 3:49 AM

Does SAP ECC 6.0 run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?

HI all,
Does SAP ECC 6.0 run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?
Thanks in Advance
Sapsanthose

sapsanthose wrote:
HI all,
>
>
>
> Does SAP ECC 6.0 run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?
>
>
> Thanks in Advance
>
> Sapsanthose
Hi,
Yes, it does. Check the service.sap.com/pam
Best regards,
Orkun Gedik

Best Practices for user ORACLE

Hello,
I have few linux servers with user ORACLE.
All the DBAs in the team connecting and working on the servers as ORACLE user and they dont have sperate account.
I create for each DBA its own account and would like them to use it.
The problem is that i dont want to lock the ORACLE account since i need it for installation/upgrade and etc , but yet i dont what
the DBA Team to connect and work with the ORACLE user.
What are the Best Practice for souch case ?
Thanks

To install databases you don't need acces to Oracle.
Also installing 'few databases every month' is fundamentally wrong as your server will run out of resources, and Oracle can host multiple schemas in one database.
"One reason for example is that we have many shell scripts that user ORACLE is the owner of them and only user ORACLE have a privilege to execute them."
Database control in 10g and higher makes 'scripts' obsolete. Also as long as you don't provide w access to the dba group there is nothing wrong in providing x access.
You now have a hybrid situation: they are allowed interactively to screw 'your' databases, yet they aren't allowed to run 'your' script.
Your security 'model' is in urgent need of revision!
Sybrand Bakker
Senior Oracle DBA

Redo log best practice for performace - ASM 11g

Hi All,
I am new to ASM world....can you please give your valuable suggestion on below topic.
What is the best practice for online redo log files ? I read it somewhere that oracle recommand to have only two disk group one for the all DB fils, control files online redo log files and other disk group for recovery files, like mulitplex redo file, archive log files etc.
Will there be any performance improvment to make different diskgroup for online redo log (separate from datafiles, contorl files etc) ?
I am looking for oracle document to find the best practise for redo log (peformance) on ASM.
Please share your valuable views on this.
Regards.

ASM is only a filesystem.
What really count on performance about I/O is the Storage Design i.e (RAID used, Array Sharing, Hard Disk RPM value, and so on).
ASM itself is only a layer to read and write on ASM DISK. What mean if you storage design is ok ... ASM will be ok. (of course there is best pratices on ASM but Storage must be in first place)
e.g There is any performance improvement make different Diskgroup?
Depend...and this will lead to another question.
Is the Luns on same array?
If yes the performance will end up on same point. No matter if you have one or many diskgroup.
Coment added:
Comparing ASM to Filesystem in benchmarks (Doc ID 1153664.1)
Your main concern should be how many IOPs,latency and throughput the storage can give you. Based on these values you will know if your redologs will be fine.

SAP Best Practices for Data Migration :repositories only on MS SQL Server ?

Hi,
I'm implementing the "SAP Best Practices for Data Migration" (see https://websmp109.sap-ag.de/bp-datamigration).
As part of the installation you have to install MS SQL Server Express Edition. The installation guide contains detailed steps to do this. All repositories for Data Services should be running on SQL Server, according to the installation guide.
The customer I'm working for now does not want to use SQL Server, but DB2, as company standard.
So I use DB2 for the local and profiler repositories.
I notice however that the web application http://localhost:8080/MigrationServices does not support DB2.The only database type you can select in the configuration area is MS SQL Server.
Is this a limitation, a by design ?

Hans,
The current release of SAP Best Practices for Data Migration, v1.32, supports only MS SQL Server. The intent when developing the DM content was to quickly set up a temporary, standardized data migration environment, using tools that are available to everyone. SQL Server Express was chosen to host the repositories, because it is easy to set up and can be downloaded for free. Sone users have successfully deployed the content on Oracle XE, but as you have found, the MigrationServices web application works only with SQL Server.
The next release, including the web app, will support SQL Server and Oracle, but not DB2.
Paul

Best practice for reinstalling anti virus on reinstalling windows

Best practice for reinstalling anti virus after formatting drive and reinstalling windows No anti virus disc.
Hasty

Hello,
I'd ask in the Windows forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog:http://unlockpowershell.wordpress.com
My Book:Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Best practice for creating a new email address to Exchange Server 2010 for share point Library

Hi,
Please advise if there is any best practice for the above issue?
Thanks
srabon

Hi Srabon,
Hope these are what you want.
Use a cmdlet to Create a User account and Mailbox in Exchange 2010
http://technet.microsoft.com/en-us/magazine/ff381465.aspx
Create a Mailbox for an Existing User
http://technet.microsoft.com/en-us/library/aa998319(v=exchg.141).aspx
Thanks
Mavis
Mavis Huang
TechNet Community Support

Tips For Installation of Migration Client on Windows 2008.

Hi All,
I am completely new to installation of Migration Utiliity.
If anybody have performed Installation of Migration Client on Windows 2008 machine For IPM 10g To IPM 11g data migration,
Please help me by suggesting tips...
Thanks in advance
Vikas
Edited by: 862821 on Feb 18, 2013 10:55 PM

Hi all,
I have installed migration client on IPM 10g machine.
From IPM 10g I want to export perticular application.
For which I have to configure that application in IPM migration tool for export.
I need steps to configure application in Migration client(10.1.3.6).
Please somebody help me ..
Thanks in advance
Vikas

Best practices for an oracle application upgrade

Hello,
We have an enterprise application deployed on Oracle Weblogic and connecting to an Oracle database (11g).
The archive is versioned and we are using Weblogic's feature to upgrade to new versions and retire old versions.
In a case of emergency when we need to rollback an upgrade, the job is really easy on Weblogic but not the same on Oracle DB.
For most of our releases, the release package is an ear plus some database scripts.
Releases are deployed with minimum downtime, so while we are releasing our clients are still writing to the DB.
In case of a rollback is needed, we need to make sure the changes we made to the DB structure (Views, SP, Tables...) are reverted but data inserted by clients stayed intact.
Correct me if I am wrong, but Flashback and RMAN TSPITR are not the good options here.
What other people usually do in similar cases? What are best practices and deployment plans for our case?
Guides and direction are welcomed.
Thanks!

Hi Magnus
I guess you have to install again to ensure no problems. BP installation also involves ensuring correct SP levels (cannot be higher) for all software components.
Best regards
Ramki

Best practice for installation oracle 11g rac on windows 2008 server x64

Similar Messages

Maybe you are looking for