Best practice for SD Cube

Hi Gurus!
I have to active this cubes:
Deliveries
0SD_C02
Delivery Service 0SD_C04
I can´t find the best practices for that.
Any ideas?
I will assign full points.
Thanks in advance!

Did you wanted Best Practice for Installation.
Find out datasources feeding 0SD_C02 from <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm">Help</a> .
Activate the same in ECC - RSA5
Replicate in BW.
Install 0SD_C02 with Grouping as Dataflow Before

Similar Messages

Best Practice For Cube Design

All,
First post here and was wondering if anyone out there has a best practice for cube design or optimisation. Currently have 7 Cubes that have been populated for the last 6 months and am now looking at ways of speeding up their population.
Are there any hard and fast rules about dimensions?
Should they be kept to a percentage of the fact table?
When should line item dimensions be used?
Regards
Gary Boyle

Hi Gary,
Ideally the DIM tables should be 20% of the fact table and preferably less. You can check the size ratios in RSRV using the Database tables test > Database info about InfoProvider tables. Line items dimensions should be employed where the char has a large number of unique values (like 0MATERIAL, or 0CUSTOMER), so that anothe DIM ID is not created, but the SID values are used directly in the Fact Table.
See these for more:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/10b589ad-0701-0010-0299-e5c282b7aaad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08f1b622-0c01-0010-618c-cb41e12c72be
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84
Hope this helps...

Best practices for loading apo planning book data to cube for reporting

Hi,
I would like to know whether there are any Best practices for loading apo planning book data to cube for reporting.
I have seen 2 types of Design:
1) The Planning Book Extractor data is Loaded first to the APO BW system within a Cube, and then get transferred to the Actual BW system. Reports are run from the Actual BW system cube.
2) The Planning Book Extractor data is loaded directly to a cube within the Actual BW system.
We do these data loads during evening hours once in a day.
Rgds
Gk

Hi GK,
What I have normally seen is:
1) Data would be extracted from APO Planning Area to APO Cube (FOR BACKUP purpose). Weekly or monthly, depending on how much data change you expect, or how critical it is for business. Backups are mostly monthly for DP.
2) Data extracted from APO planning area directly to DSO of staging layer in BW, and then to BW cubes, for reporting.
For DP monthly, SNP daily
You can also use the option 1 that you mentioned below. In this case, the APO cube is the backup cube, while the BW cube is the one that you could use for reporting, and this BW cube gets data from APO cube.
Benefit in this case is that we have to extract data from Planning Area only once. So, planning area is available for jobs/users for more time. However, backup and reporting extraction are getting mixed in this case, so issues in the flow could impact both the backup and the reporting. We have used this scenario recently, and yet to see the full impact.
Thanks - Pawan

Best practice for calc measures

Hi,
I read in one of the olap blog from experts which says that best practice for creating the calc measures is to have them in a seperate cube.
My question is that suppose I have two cubes in a AW of different dimensionality. Both the cubes has some calc measures to be created.
So can I create one more cube(dedicated to calc measures) considering all the available dimensions in the AW and create the calc measures for both the cube which has different dimensionality?
If I cannot do this then this means that if I have two cubes having different dimensionality then I would need two more cubes to create the calc measures for them? if yes then what would be the size implecation of the AW?
Thanks in advance.
Thanks
Brijesh

"Can I create one more cube(dedicated to calc measures) considering all the available dimensions in the AW and create the calc measures for both the cube which has different dimensionality?"
Yes, you can.
This is a pretty common thing to do. Store your base measures efficiently and then use calculated measures with the 'superset' dimensionality to bring different shaped measures together for the purposes of calculations or simply to get them all in one 'hypercube' to simplify access by SQL query tools and apps.
Kevin

Best practice for real time requierement

All,
I am trying to find out what is the best practice for reporting against real time data ?
is it while using
1 - webi against universe/bex query on the top of hybrid cubes ?
2 - Crystal report directly against the ECC data ?
3 - using another solution such as Data Fedrator ? or something different ?
I am looking to know if anyone got such req and also to share their experience
did they get some huge challenge against hybrid cubes ?
Thanks in advance for your help
Philippe

Well their first requierement was to get real time data .. if i am in Xcelsius and click refresh then i want it to load my last data ..
with live office , i can either schedule a crystal report and get the data delayed or use the option from live office to make iterfresh as right now .. is that a correct assumption ?
I was talking about BW, just in case they are willing to change the requierement to go from Real time to every 5 min
Just you know we are also thinking of the following option:
1 - modify the virtual provider on the CRM machine to get all the custom fields needed for the Xcelsius Dashboard
2 - Build some interactive report on the top of these Virtual Provider within CRM
3 - get the link to this report , it is one of the Report feature within CRM
4 - design and build your dashboard on the top of it
5 - EXport your swf file to the cRM web ui
we are trying to see which one is the best one
Philippe

Best Practice for 0InfoObjects

Hi,
I need assistance on BI best practices for using 0infoObjects. Currently, we have many 0infoObjects such as 0CostCenter, 0ProfitCenter, 0SalesOrg etc which are used in zinfoObjects like Zcustomer, Zmaterial etc in addition to Z cubes and zODS.
We are starting an upgrade project which presents a chance to convert some of these 0infoObjects to ZinfoObjects so that they can be customized later as needed.
What is the best practice for situations like this? do we take on the extra effort of changing 0 to Z ( I read somewhere this is advisable ) or should we target only some infoObjects which historically change the most.
Thanks,
Kartik

Hi:
Use the 0-infoobjects as they are.
Business Content gven by SAP is pretty good for some modules (e.g., Finance).
Clients pay lot of maney for SAP so that they can use the delivered Business Content as much as possible and then, if needed create new Custom Objects.
When it comes to InfoProviders, its a good idea to copy them to Z-InfoProviders and make new changes accordingly. but, InfoPbjects like Cost Center, COntrolling Area, Functional Loc, Material, etc, etc; just use them as they are. Good luck if you want to create Z-Infoobjects for the above critical infoobjects.
Do you know how difficult it is to get R/3 based hierarchies for Z-infoobjects (again, Cost Center, Fucntional Location, Cost Element)?
Also, you have to use SAP delivred Time Characteristics.
Since you need to use some delivered InfoObjects anyway, it dictates that you have to be careful installing new Business Content.
There you go.
U.P.Ram Chamarthy

Best practices for setting up users on a small office network?

Hello,
I am setting up a small office and am wondering what the best practices/steps are to setup/manage the admin, user logins and sharing privileges for the below setup:
Users: 5 users on new iMacs (x3) and upgraded G4s (x2)
Video Editing Suite: Want to connect a new iMac and a Mac Pro, on an open login (multiple users)
All machines are to be able to connect to the network, peripherals and external hard drive. Also, I would like to setup drop boxes as well to easily share files between the computers (I was thinking of using the external harddrive for this).
Thank you,

Hi,
Thanks for your posting.
When you install AD DS in the hub or staging site, disconnect the installed domain controller, and then ship the computer to the remote site, you are disconnecting a viable domain controller from the replication topology.
For more and detail information, please refer to:
Best Practices for Adding Domain Controllers in Remote Sites
http://technet.microsoft.com/en-us/library/cc794962(v=ws.10).aspx
Regards.
Vivian Wang

Best-practice for Catalog Views ? :|

Hello community,
A best practice question:
The situtation: I have several product categories (110), several items in those categories (4000) and 300 end-users. I would like to know which is the best practice for segment the catalog. I mean, some users should only see categories 10,20 & 30. Other users only category 80, etc. The problem is how can I implement this ?
My first idea is:
1. Create 110 Procurement Catalogs (1 for every prod.category). Each catalog should contain only its product category.
2. Assign in my Org Model, in a user-level all the "catalogs" that the user should access.
Do you have any idea in order to improve this ?
Saludos desde Mexico,
Diego

Hi,
Your way of doing will work, but you'll get maintenance issues (to many catalogs, and catalog link to maintain for each user).
The other way is to built your views in CCM, and assign these views to the users, either on the roles (PFCG) or on the user (SU01). The problem is that with CCM 1.0 this is limitated, cause you'll have to assign one by one the items to each view (no dynamic or mass processes), it has been enhanced in CCM 2.0.
My advice:
-Challenge your customer about views, and try to limit the number of views, with for example strategic and non strategic
-With CCM 1.0 stick to the procurement catalogs, or implement BADIs to assign items to the views (I experienced it, it works, but is quite difficult), but with a limitated number of views
Good luck.
Vadim

Best Practice for Securing Web Services in the BPEL Workflow

What is the best practice for securing web services which are part of a larger service (a business process) and are defined through BPEL?
They are all deployed on the same oracle application server.
Defining agent for each?
Gateway for all?
BPEL security extension?
The top level service that is defined as business process is secure itself through OWSM and username and passwords, but what is the best practice for security establishment for each low level services?
Regards
Farbod

It doesnt matter whether the service is invoked as part of your larger process or not, if it is performing any business critical operation then it should be secured.
The idea of SOA / designing services is to have the services available so that it can be orchestrated as part of any other business process.
Today you may have secured your parent services and tomorrow you could come up with a new service which may use one of the existing lower level services.
If all the services are in one Application server you can make the configuration/development environment lot easier by securing them using the Gateway.
Typical probelm with any gateway architecture is that the service is available without any security enforcement when accessed directly.
You can enforce rules at your network layer to allow access to the App server only from Gateway.
When you have the liberty to use OWSM or any other WS-Security products, i would stay away from any extensions. Two things to consider
The next BPEL developer in your project may not be aware of Security extensions
Centralizing Security enforcement will make your development and security operations as loosely coupled and addresses scalability.
Thanks
Ram

Best practice for multi-language content in common areas

I've got a site with some text in header/footer/nav that needs to be translated between an English and Spanish site, which use the same design. My intention was to set up all the text as content to facilitate. However, if I use a standard dialog with the component's path set to a child of the current page node, I would need to re-enter the text on every page. If I use a design dialog, or a standard dialog with the component's path set absolutely, the Engilsh and Spanish sites will share the same text. If I use a standard dialog with the component's path set relatively (eg path="../../jcr:content/myPath"), the pages using the component would all need to be at the same level of the hierarchy.
It appears that the Geometrixx demo doesn't address this situation, and leaves copy in English. Is there a best practice for this scenario?

I'm finding that something to the effect of <cq:include path="<%= strCommonContentPath + "codeEntry" %>" resourceType ...
works fine for most components, but not for parsys, or a component containing a parsys. When I attempt that, I get a JS error that says "design.path is null or not an object". Is there a way around this?

Best Practice for utility in Sol Man 4.0

We have software component ST-ICO of release 150_700 with Patch level 5
We want a Template Selection for Utility industry. I checked in
the service market place and found that 'Baseline Package United
Kingdom V1.50, Template: BP_BLKU150' is available in the above software
component.
But we are not getting any templates other than 'BP_UTUS147 - Best Practices for Water Utility' in the 'SOLAR_PROJECT_ADMIN'
transaction.
Kindly suggest any patch needs to be applied or some configuration need to be done.
Regards
Mani

Hi Mani,
Colud u plz give me the link of "where u find the template BP_BLKU150"?
It will be helpful for me.
Thanks
Senthil

Best Practices for SRM Installation !!

Hi
can someone share the best Practices for SRM Installation ?
What is the typical timeframe to install SRM on development server and as well as on the Production server ?
Appericiate the responses
Thanks,
Arvind

Hi
I don't know whether this will help you.
See these links as well.
http://help.sap.com/bp_epv170/EP_US/HTML/Portals_intro.htm
http://help.sap.com/bp_scmv150/index.htm
http://help.sap.com/bp_biv170/index.htm
http://help.sap.com/bp_crmv250/CRM_DE/index.htm
Hope this will help.
Please reward suitable points.
Regards
- Atul

Best practices for ARM - please help!!!

Hi all,
Can you please help with any pointers / links to documents describing best practices for "who should be creating" the GRC request in below workflow of ARM in GRC 10.0??
Create GRC request -> role approver -> risk manager -> security team
options are : end user / Manager / Functional super users / security team.
End user and manager not possible- we can not train so many people. Functional team is refusing since its a lot of work. Please help me with pointers to any best practices documents.
Thanks!!!!

In this case, I recommend proposing that the department managers create GRC Access Requests. In order for the managers to comprehend the new process, you should create a separate "Role Catalog" that describes what abilities each role enables. This Role Catalog needs to be taught to the department Managers, and they need to fully understand what tcodes and abilities are inside of each role. From your workflow design, it looks like Role Owners should be brought into these workshops.
You might consider a Role Catalog that the manager could filter on and make selections from. For example, an AP manager could select "Accounts Payable" roles, and then choose from a smaller list of AP-related roles. You could map business functions or tasks to specific technical roles. The design flaw here, of course, is the way your technical roles have been designed.
The point being, GRC AC 10 is not business-user friendly, so using an intuitive "Role Catalog" really helps the managers understand which technical roles they should be selecting in GRC ARs. They can use this catalog to spit out a list of technical role names that they can then search for within the GRC Access Request.
At all costs, avoid having end-users create ARs. They usually select the wrong access, and the process then becomes very long and drawn out because the role owners or security stages need to mix and match the access after the fact. You should choose a Requestor who has the highest chance of requesting the correct access. This is usually the user's Manager, but you need to propose this solution in a way that won't scare off the manager - at the end of the day, they do NOT want to take on more work.
If you are using SAP HR, then you can attempt HR Triggers for New User Access Requests, which automatically fill out and submit the GRC AR upon a specific HR action (New Hire, or Termination). I do not recommend going down this path, however. It is very confusing, time consuming, and difficult to integrate properly.
Good luck!
-Ken

Best Practices For Household IOS's/Apple IDs

Greetings:
I've been searching support for best practices for sharing primarily apps, music and video among multple iOS's/Apple IDs. If there is a specific article please point me to it.
Here is my situation:
We currently have 3 iPads (2-kids, 1-dad) in the household and one iTunes account on a win computer. I previously had all iPads on single Apple ID/credit card and controlled the kids' downloads thru the Apple ID password that I kept secret. As the kids have grown older, I found myself constantly entering my password as the kids increased there interest in music/apps/video. I like this approach because all content was shared...I dislike because I was constantly asked to input password for all downloads.
So, I recently set up an individual account for them with the allowance feature at iTunes that allows them to download content on their own (I set restrictions on their iPads). Now I have 3 Apple IDs under one household.
My questions:
With the 3 Apple IDs, what is the best way to share apps,music, videos among myself and the kids? Is it multiple accounts on the computer and some sort of sharing?
Thanks in advance...

Hi Bonesaw1962,
We've had our staff and students run iOS updates OTA via Settings -> Software Update. In the past, we put a DNS block on Apple's update servers to prevent users from updating iOS (like last fall when iOS 7 was first released). By blocking mesu.apple com, the iPads weren't able to check for or install any iOS software updates. We waited until iOS 7.0.3 was released before we removed the block to mesu.apple.com at which point we told users if they wanted to update to iOS 7 they could do so OTA. We used our MDM to run reports periodically to see how many people updated to iOS 7 and how many stayed on iOS 6. As time went on, just about everyone updated on their own.
If you go this route (depending on the number of devices you have), you may want to take a look at Caching Server 2 to help with the network load https://www.apple.com/osx/server/features/#caching-server . From Apple's website, "When a user on your network downloads new software from Apple, a copy is automatically stored on your server. So the next time other users on your network update or download that same software, they actually access it from inside the network."
I wish there was a way for MDMs to manage iOS updates, but unfortunately Apple hasn't made this feature available to MDM providers. I've given this feedback to our Apple SE, but haven't heard if it is being considered or not. Keeping fingers crossed.
Hope this helps. Let us know what you decide on and keep us posted on the progress. Good luck!!
~Joe

Basic Strategy / Best Practices for System Monitoring with Solution Manager

I am very new to SAP and the Basis group at my company. I will be working on a project to identify the best practices of System and Service level monitoring using Solution Manager. I have read a good amount about SAP Solution Manager and the concept of monitoring but need to begin mapping out a monitoring strategy.
We currently utilize the RZ20 transaction and basic CCMS monitors such as watching for update errors, availability, short dumps, etc.. What else should be monitored in order to proactively find possible issues. Are there any best practices you all have found when implimenting Monitoring for new solutions added to the SAP landscape.... what are common things we would want to monitor over say ERP, CRM, SRM, etc?
Thanks in advance for any comments or suggestions!

Hi Mike,
Did you try the following link ?
If not, it may be useful to some extent:
http://service.sap.com/bestpractices
---> Cross-Industry Packages ---> Best Practices for Solution Management
You have quite a few documents there - those on BPM may also cover Solution Monitoring aspects.
Best regards,
Srini
Edited by: Srinivasan Radhakrishnan on Jul 7, 2008 7:02 PM

Best practice for SD Cube

Similar Messages

Maybe you are looking for