Best practice required to configure CW and MARS SM and ACS

Dear All,
i had alot of managment program in my corporate org.
CW LMS
CW HUM
CW QPM
CW IPM
ACS
MARS
Cisco IPS IDS 4260
WLC
tandberg system
could you gude what is the best service from cisco that i could buy it to have a profetional  service to configure over all system in one integrated unite ,
so i have one report shows all the issue with customize GUI, for managers , directors , and CTO, CEO,,
thank you in advance,
Ali Alkhafaji

I have the code working without use of config files. I am just disappointed that it is not working using the configuration files. That was one of the primary intents of my code re-factoring. 
 Katherine
Xiong , If you are proposing this as an answer then does this imply that Microsoft's stance is not to use configuration files with SSIS?? Please answer.
SM

Similar Messages

  • Best Practice for Use of ABAP in Customizing SRM and/or CRM

    I was wondering if there is a document that defines best practices for the use of ABAP with the installation and customization of SRM and/or CRM.   Such as amount of ABAP coding typically required, and best practices around the use of ABAP for customization and configuration.
    Thanks.

    Hi, Johnson
    Sorry, Please don't mind, you are not at right place to ask the Question like this
    Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!!
    Thanks and Regards,
    Faisal

  • Request for any Best Practice document for configuring Service Parameters on CUCM 9.1.1

    Hi Team,
    Could you please send if you have any  Best Practice document for configuring Service Parameters on CUCM 9.1.1. That would really help.
    Thanks,
    Guru

    Hi
    There's no 'best practice' as such, but there are a few that I think should be default:
    Enabling CDR, On-Hook Pickup, CFwdAll Override... but really the settings are specific to the requirements of the deployment.
    Aaron

  • Best practice steps of configuration

    Hello All
    Can anyone write back on What is the best practice steps of configuration in HCM for a new implementation.
    Thanks

    Hi,
    SAP Best Practices is prepacked ready to use solutions for small and medium size Business units (SMBs)
    SAP Best practices is based on  Building Block methodology
    SAP Best Practices is fully documentation including preconfigured business processes, training material, data conversion tools, and test catalogs.
    Best Practcies is totally Buidleing block Methods.
    Building Blockss Contains:
    Business Configuration Sets (BC Sets)
    Sample master data
    Configuration documentation
    Print forms or reports
    Business Configuration Sets are group of Configuration Sets. As We can say group of tables for specific Business Process.
    for more details go help.sap.com., then go for Best practices you will very useful information.
    Regs,
    Brahma

  • Best Practices using Pre-configurator

    Hi
    Anybody aware of doing QM configuration as per the Best Practices through Pre-configurator.

    Hi
    By using sap library you can configure the QM module . Basically you have to know the process of Quality Managment
    Regards
    M B raju

  • What are best practices for managing my iphone from both work and home computers?

    What are best practices for managing my iphone from both work and home computers?

    Sync iPod/iPad/iPhone with two computers
    Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
    I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans withiTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
    As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
    When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entires and import the local content you have on that box.
    tt2

  • Best practice Forms 10g configuration setup and tuning

    Hi,
    We are currently depolying forms 10g from 6i client/server version. Users are experiencing Form hangups and hour glasses. This does not happen that often but can happen any time, anywhere in the app (users do inserts, updates and deletes and queries).
    Is there a baseline best practice configuration setup anywhere either in the Forms side or the AppServer side of things?
    Here is our setup:
    Forms 10g (9.0.4)
    Reports 10g (9.0.4)
    Oracle AppServer 10g (9.0.4)
    OS = RedHat Linux
    Client Workstations run on Windows 2000 and XP w/ Internet Explorer 6 or higher
    Average No. of users = 250
    Thanks for all your help

    Shutdown applications within the guest.
    Either power off from Oracle VM Manager or 'xm shutdown xxx' from the command line
    It is possible one or more files could be open when the shutdown is initiated.
    Have found at least one case of misconfigured IP which would have resulted in the disk access being via the 'Front End' interface rather than the Back End.
    Thanks

  • Best Practice in V7.0 : Issues with Sales Planning and Reporting

    I am trying to install the SAP Best Practices for BPC 5.1 on SAP PBC 7.0 SP 04 I have done this as I cannot find any Best Practice documents for version 7 as yet.
    I have managed to get through the Administration setup and most of the BPC -Administration Configuration Guide, however I am having a problem with 7.4 Running a Data ManagementPackage - Import on page 32 of 36. This step involves you uploading a data file Demo_Revenue_Data.txt into BPC.
    The file says that it has failed due to Ínvalid dimension ACCOUNT in lookup.
    I believe that this error may be driven by a previous step 6.4 Creating Script Logic where the logic for BP_Sales Application was required.
    My question is twofold in that I need to determine:
    1. Has anyone else tried the BestPractices for BPC 5.0 in BPC 7.0?
    2. Does anyone know how to overcome the error when uploading the Demo Revenue into BPC?
    Edited by: Kevin West on Jul 8, 2009 2:03 PM

    Hi,
    BPC best practices document from 5 is working fine also for 7.0 because 7.0 is just an update for 5.x.
    Running Import involve logic just if you are running the package with option enabled (Run Default Logic).
    Your issue seems to be related to maping which means you have to check Transformation and Conversion file.
    Any way the best practices document will not provide you information about how to build Transformation and Conversion files.
    You have to follow an SAP BPC training and that it will help you to build your applicatioon easier and faster.
    Regards
    Sorin Radulescu

  • Best practice MPLS design/configuration for small service provider

    We are a small regional service provider and did not have MPLS supported on our network.  To start supporting MPLS, I’d like to get opinions and recommendations on the best practice configuration. 
    Here is what we have today –
    We have our own BGP AS and multiple /24s.
    We are running OSPF on the Cores and BGP on the Edge routers peering with ISPs.
    We peer with multiple tier-1 ISPs for internet traffic. We do not provide public transit.
    What we want for phase one MPLS implementation –
    Configure basic MPLS /vpn functionality.
    No QoS optimization required for phase 1.
    We have Cisco ME 3600X for  PE. Any recommendations will be appreciated.

    Not sure what kind of devices or routers you have in your network but looks for if you have support for labeled multicast for MVPN support. That will avoid other complexity of using other control protocols (like PIM) in core.
    PE redundancy can be obtained by BGP attributes, CE-PE connectivity can be tunned using IGP or VRRP/HSRP...
    You can have mutiple RSVP TEs for various contract traffic and you can bind various kind of traffic to different RSVP Tunnels based on contract or service with your customer.
    RSVP-TE with link/node protection design will be of great help to achieve quicker failover.

  • Best practice for server configuration for iTunes U

    Hello all, I'm completely new to iTunes U, never heard of this until now and we have zero documentation on how to set it up. I was given the task to look at best practice for setting up the server for iTunes U, and I need your help.
    *My first question*: Can anyone explains to me how iTunes U works in general? My brief understanding is that you design/setup a welcome page for your school with sub categories like programs/courses, and within that you have things like lecture audio/video files and students can download/view them on iTunes. So where are these files hosted? Is it on your own server or is it on Apple's server? Where & how do you manage the content?
    *2nd question:* We have two Xserve(s) sitting in our server room ready to roll, my question is what is the best method to configure them so it meets our need of "high availability in active/active mode, load balancing, and server scaling". Originally I was thinking about using a 3rd party load balancing device to meet these needs, but I was told there is no budget for it so this is not going to happen. I know there is IP Failover but one server has to sit in standby mode which is a waste. So the most likely scenario is to setup DNS round robin and put both xserves in active/active. My question now is (this maybe related to question 1), say that all the content data like audio/video files are stored by us, (We are going to link a portion of our SAN space to Xserve for storage), if we are going with DNS round robin and put the 2 servers in Active/Active mode, can both servers access a common shared network space? or is this not possible and each server must have its own storage space? And therefore I must use something like RSYNC to make sure contents on both servers are identical? Should I use XSAN or is RSYNC good enough?
    Since I have no experience with iTunes U whatsoever, I hope you understand my questions, any advice and suggestion are most welcome, thanks!

    Raja Kondar wrote:
    wht is the Best Practice for having server pool i.e
    1) having a single large serverpool consisting of "n" number of guest vm
    2) having a multiple small serverpool consisting of less of number of guest vm I prefer option 1, as this gives me the greatest amount of resources available. I don't have to worry about resources in smaller pools. It also means there are more resources across the pool for HA purposes. Not sure if this is Official Best Practice, but it is a simpler configuration.
    Keep in mind that a server pool should probably have up to 20 servers in it: OCFS2 starts to strain after that.

  • Best Practice Document to Configure Quality Management Analytics

    Hi Experts,
    Can any one help in finding out the best practices document for installing BI content for Quality Management.
    Regards,
    Santhosh

    Hi Reddy,
    Thanx  for the link but I have a requirement to install the BI content for Quality management to present it to the client. So I need to install as a whole not for a particular requirement.
    I want to know do I need to install all the datasources like masterdata and Transactional which are available in RSA5.
    Regards,
    Santhosh.

  • SAP Best Practices for SSO Configuration

    Hello There,
    Are there any SAP Best Practices available for SSO Configuration. If so, Kindly help me with those..
    And also any Third party tools available in the market for SSO Configuration..
    Appriciate your Help on this.. Thanks in advance.
    Regards,
    Pranay S
    Edited by: Pranay Subedari on Apr 29, 2011 9:12 AM

    Hello,
    Types on the SSO are classified with the systems involved in configuration (i.e.) SSO between ABAP Stack and Java stack or LDAP, OS
    Refer the link for more details [Document Deleted]
    Regards,
    Anand
    Message was edited by: Jason Lax

  • Best practices on wlan configuration

    I have 6 accesspoints with controller . We are using voice video and data on the wireless with multiple SSID and vlans what could be the best practice on the accesspoints QOS and the switch port configuration of 3750 is it trunk or accessport?
    Sent from Cisco Technical Support iPad App

    Well you can start out by looking at the 792x deployment guide if that's what your using for voice.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g/7_0/english/deployment/guide/7925dply.pdf
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a0080810880.shtml
    Sent from Cisco Technical Support iPhone App

  • CRM Best Practices V1.2007 with ERP HR Integration, C01 and C05

    Hi,
    working on Best Practices CRM V.1.2007 I  now should proceed with Building Block C01 (CRM Organizational Model).
    I want to use the CRM System integrated with a new installed ERP System and HR Integration.
    Therefore I have to use the Building Block C05 (CRM Organizational Model with HR Integration) instead of C01 (CRM Orgnizational Model)
    My Question: Is it allowed to proceed with C05 by doing the work direct from the SAP GUI Menu; afterwards I could confirm the steps in the Solution Builder for C01?
    Regards, Andreas

    Hi Andreas,
    Yes, you could do that. But be aware that the other building blocks for master and transaction data replication should not be started unless you are done with the org model BB C01.
    Regards,
    Padma

  • Infomation regarding Best Practices Required,

    Dear Friends,
        Happy New Year......
    Im working as a part BI Excellence team in a reputed company.
    I jst want to say a client to install the BI Best Practice(Scenario -  SCM), inorder to do that i need to present him the advantages and difference between Best practice (SPECIFIC FOR BI) over General Implementation.
    When i search in Help.sap.com, it generally speaks about the time consumption n guidelines of Overall SAP Best Practices.
    Can anyone help me wrt to BI (From Blue Print to Go Live), Time line diferrences between SAP BI Best Practice and General Implementation.
    An Example with Specific Scenario Like SCM, Taking a Cube for IM and describing the Start to End Implemenation process and its timeline. How the same differs, when we go by using a SAP BI Best Practice installation?
    Please provide your Valuable suggesstions, as i dont hav any Implementation experience.
    Requesting your Valuable Guidence.
    Regards
    Santhosh kumar.N

    Hi,
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f6/7a0c3c40787431e10000000a114084/frameset.htm
    http://help.sap.com/bp_biv370/html/Bw.htm
    Hope it helps........
    Thanks & Regards,
    SD

Maybe you are looking for