Best Practice Solution with 2 Internet Connections

Good day everyone,
We used to have single ADSL connections at our clients that provide the internet connection for the network. We have recently partnered up with a Fiber provider and are slowly busy rolling out Fiber connections at our clients. We are also offering redundancy
with the ADSL connection as a back up for the Fiber connection.
I would like to know if anyone has suggestions as to what would be the best practise configuration on various Windows Server platforms to make this possible? The idea is that if the Fiber connection fails (for whatever reason) that the ADSL connection takes
over. This must be an automated process.
I am open for any form of suggestions.
Thanks for your time.
Rudi

Hi,
Our current solution is to have to NICs and have both connect to the server. They then have 2 different IPs and we have the DHCP give out the IP as the gateway. The only problem with that is that we cannot control the automated change of gateway IP if the
main connection fails.
We are also willing to look into other hardware solutions that could control this.
Regards,
Rudi

Similar Messages

SAP Best Practice Integrated with Solution manager

We have a server in which we installed SAP Best practice baseline package and we have the solution manager 7.01 SP 25
We maintained the logical port but when we try to check connectivity to solution manager we got the following error:
Connectivity check to sap solution manager system not successful
Message no. /SMB/BB_INSTALLER375
Can anyone guide us how to solve the problem and also if there is another way to upload the solution defined on the best practice solution builder into sap solution manager as a template project
Thanks,
Heba Hesham

Hi,
Patches for SAPGUI 7.10 can be found at the following location:
http://service.sap.com/patches
-> Entry by Application Group -> SAP Frontend Components
-> SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 7.10 CORE
-> SAP GUI FOR WINDOWS 7.10 CORE -> Win 32
-> gui710_2-10002995.exe

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

BEST PRACTICES FOR CREATING DISCOVERER DATABASE CONNECTION -PUBLIC VS. PRIV

I have enabled SSO for Discoverer. So when you browse to http://host:port/discoverer/viewer you get prompted for your SSO
username/password. I have enabled users to create their own private
connections. I log in as portal and created a private connection. I then from
Oracle Portal create a portlet and add a discoverer worksheet using the private
connection that I created as the portal user. This works fine...users access
the portal they can see the worksheet. When they click the analyze link, the
users are prompted to enter a password for the private connection. The
following message is displayed:
The item you are requesting requires you to enter a password. This could occur because this is a private connection or
because the public connection password was invalid. Please enter the correct
password now to continue.
I originally created a public connection...and then follow the same steps from Oracle portal to create the portlet and display the
worksheet. Worksheet is displayed properly from Portal, when users click the
analyze link they are taken to Discoverer Viewer without having to enter a
password. The problem with this is that when a user browses to
http://host:port/discoverer/viewer they enter their SSO information and then
any user with an SSO account can see the public connection...very insecure!
When private connections are used, no connection information is displayed to
SSO users when logging into Discoverer Viewer.
For the very first step, when editing the Worksheet portlet from Portal, I enter the following for Database
Connections:
Publisher: I choose either the private or public connection that I created
Users Logged In: Display same data to all users using connection (Publisher's Connection)
Users Not Logged In: Do no display data
My question is what are the best practices for creating Discoverer Database
Connections.
Is there a way to create a public connection, but not display it in at http://host:port/discoverer/viewer?
Can I restrict access to http://host:port/discoverer/viewer to specific SSO users?
So overall, I want roughly 40 users to have access to my Portal Page Group. I then want to
display portlets with Discoverer worksheets. Certain worksheets I want to have
the ability to display the analyze link. When the SSO user clicks on this they
will be taken to Discoverer Viewer and prompted for no logon information. All
SSO users will see the same data...there is no need to restrict access based on
SSO username...1 database user will be set up in either the public or private
connection.

You can make it happen by creating a private connection for 40 users by capi script and when creating portlet select 2nd option in Users Logged in section. In this the portlet uses there own private connection every time user logs in.
So that it won't ask for password.
Another thing is there is an option of entering password or not in ASC in discoverer section, if your version 10.1.2.2. Let me know if you need more information
thnaks
kiran

Organizer elements 11. Problem with your internet connection

I am trying to access facebook and Flickr via the Organizer with elements 11. I went to preferences and cleared the oline services, when I try to refresh the partner services I am greeted with the error " there is a problem with your internet connection, check your firewall settings" .
Windows 8, updated. I tried disabling the firewall. I have also tried making sure permissions are set up to allow all adobe products access through the frewall when it is enabled. No other network managment services or virus scanners installed. just default 64bit windows 8.
I am currently left with no partner services; facebook, flicker, picasa, etc.... I could reinstall organizer i guess to get the default services back...
I found discussions on the web but none with a solution. http://forums.adobe.com/message/4035670
Any help would be great

I apologize for the delay. An update was released shortly after I posted the question that resolved the issue. Thank you for your assistance though. As soon as I read your advice I went to my laptop to follow your instructions. Upon opening photoshop I was prompted with an adobe update message. After the update the issue was resolved. Again, sorry for not updating the situation.

Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell computer w/ windows 7 with minimal programs installed

Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a nItunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell, windows 7 ultimate, no virus or firewall programs installed.

This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013

TS3297 I have paid for a rental movie but cannot download it. It keeps saying there is a download error retry and I have been for an hour. There is nothing wrong with my internet connection

I have paid for a rental movie but cannot download it. It keeps saying there is a download error retry and I have been for an hour. There is nothing wrong with my internet connection.How do I get it?

There is nothing wrong with my internet connection.
Is that a -50 error message, jolyn?
If so, perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

Ned, thanks for responding. Internet access is not the problem, I will have a tower computer connected to Comcast.
Isolating the laptop from the internet is the issue.
From: Ned Murphy <[email protected]>
To: Mordecai benHerschel <[email protected]>
Sent: Wednesday, March 18, 2015 7:27 PM
Subject: I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussionSince it is a portable machine, couldn't you go somewhere that has wifi available and use that as a temporary internet connection? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7314414#7314414 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7314414#7314414 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I downloaded Lion and have attempted to 'updat' it from apps to my imac... after 3 hours of uploading it show mw an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?

I downloaded Lion and have attempted to 'update' it from apps to my imac... after 3 hours of uploading it show me an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?

What type of Internet connection do you have? How fast is it?

Looking for best practice white paper on Internet Based Client Management

Looking for best practice white paper on Internet Based Client Management for SCCM 2012 R2.
Has anyone implemented this in a medium sized corporate environment? 10k+ workstations. We have a single primary site, SQL server and 85 DP's.

How about the TechNet docs: http://technet.microsoft.com/en-us/library/gg712701.aspx#Support_Internet_Clients ?
Or one of the many blog posts on the subject shown from a web search: http://www.bing.com/search?q=configuration+manager+2012+internet+based+client+management&go=Submit+Query&qs=bs&form=QBRE ?
Jason | http://blog.configmgrftw.com | @jasonsandys

How to download Hibernate Tutorial Workshop to PC with no internet connect

Hi,
How to download Hibernate Tutorial Workshop to PC with no internet connection?
Is there any zip file on BEA site where I can download and import the hibernate tutorial to the Workshop on the PC with no internet connection?

Ram,
Could you add this to the Wiki page? Add it as an Wiki entry instead of
the formal support doc?
http://dev2dev.bea.com/wiki/bin/view/ProdTech/WorkshopFAQ
br
Ram Venkataswamy wrote:
Yes, you can download the tutorial on a system with internet connection and then use that war file on the system w/o connection.
On a system with internet connection, download https://dev2devclub.bea.com/downloads/examples/hibernate-tutorial.war
copy the war file to the actual systemEx: ....\workspace\metadata\.plugins\com.m7.nitrox\.examples
Launch Workshop, New > Example > Workshop Hibernate Example > continue with creating the project (local copy would be used instead of downloading from internet).

Download CC versions for installation on a computer with no internet connection

So I have just signed up with CC as I am wanting to get Photoshop and lightroom
So I have a computer with no internet access, and so I would like to download the CC versions of the software on my work computer.
Once downloaded, I will install the software on the computer with no internet connection, then utilise my mobile phone to teither the computer to the internet to register the products.
So my question is how do this?
Downloading the software using the manager on my phones internet is not an option. (with 300mb per month quota on the phones not an option)
I am wanting the CC features of photoshop not CS6 so registering the cs6 version is not an option.
Also when updates come out for CC where can download those.
(we have had a change of govt so I might get 24mb/s internet in 2019)
thanks

Hi Paul,
Welcome to the Community!
You can certainly download the files on a different machine and install on a computer without internet however you should connect to internet once in a month so that we can charge your credit card.
The option to connect to internet with phone will work however updates needs to be downloaded via internet as the size might be in GB's.
To download the executable files, visit this page http://prodesigntools.com/adobe-cc-direct-download-links.html. Remeber to follow the Very Important instructions or else the download will not start.
Thanks!
Ankit

How do I maintain license on systems with no internet connection?

I will be installing CS6 on PCs with initial internet connection, but they will be moved into a space without any internet.
How do I keep the CS6 working without the connection?
Is there a license file I can download then apply to the systems without the connectivity?

Hello Scott,
Adobe has prepared this informations: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
>>> Additional information for users who are temporarily unable to connect >>> ...I quote:
What happens if it's necessary to be offline for a while?
The Creative Cloud software makes a call to Adobe servers once a day to verify the account status.
If the account is in good standing (that is, payment is up-to-date) when the last call happens, the software status is refreshed to run for at least 99 days while being offline.
Note: Signing out and signing back in (while online) just before going offline for a long period ensures that the software works for at least 99 days without needing to connect.
The software still reminds you to connect to the Internet during this time. These reminders can be suppressed until the last 30 days, when a daily message prompts you to go online and refresh the software status.
Hans-Günter

Problem with my internet connection with Mail and others

Hi
I seem to have a problem with my internet connection that is through Ethernet. I have just downloaded the update to iLife 9 and the down load speed went from zero to 1.1BB/s but most of the time it downloads at speeds around 8KB/s also Mail some times returns mail sent but there seems to be no problem sending out only that things go faster out than in. My internet speed from my ISP is 500KB/s so as you can see I was at first happy that I was getting speeds in of 1.1MB/s. I have done a diagnostic test through network also fully run Norton and finally run utilities with no problems showing. My ISP is willing to come and have a look at my internet but I some how think it's my computer, any ideas?
Thanks

The first thing I would do is completely disable Norton AntiVirus; there are no viruses for Mac OS X, so it can't protect you from something that doesn't exist. It can, however, severely slow down your system. Do that and then restart Mail and see if the problem continues.
You should also try creating a new User account and test Mail there to see if you experience the same problem; if so, then the issue is systemwide. If not, it's something specific to your regular user account.
As for your download speed, it's not 1.1MB/s; it's 1.1Mb/s. Upload speed is slower than download speed for both Cable and DSL service. I doubt the problem is your modem/router, but you should try shutting down your Mac and the modem for a few minutes. If your modem/router has a reset button, use it, then restart it and your Mac and see if the problem continues.

I have a PC with a internet connection through a modem and ever since i have had it i have had no connection to the itunes store. And even if I try to update anything it says that i need to check my connection, but my connection is fine. What should I do?

I have a PC with a internet connection through a modem and ever since i have had it i have had no connection to the itunes store. And even if I try to update anything it says that i need to check my connection, but my connection is fine. What should I do?

This almost always indicates your firewall or anti-virus utilities are preventing iTunes from contacting the iTunes Store. Here is an exerpt from "Can't connect to the iTunes Store": http://support.apple.com/kb/TS1368
Troubleshooting on Windows
If you haven't been able to connect to the iTunes Store for more than a day —and other customers on our discussion boards aren't experiencing similar issues— a software or internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Click here to find out which ports and servers need to be allowed for iTunes Store access.
Update iTunes to the latest version.
If you have not done so already, try the steps in iTunes for Windows: iTunes Store connection troubleshootingto troubleshoot iTunes Store connectivity in Windows.
Firewall issues:
Windows XP: If you've upgraded to Windows XP Service Pack 2: By default, Windows Firewall is enabled. As with all firewalls not manufactured by Apple, you will need to configure Windows Firewall to allow iTunes to access the iTunes Store. To do so, see How to enable iTunes in the Windows XP Firewall.
Windows Vista and 7: As with all firewalls not manufactured by Apple, you will need to configure Windows Firewall to allow iTunes to access the iTunes Store. To do so see, the "Blocked by software firewall" section in this article.
Proxies can cause issues and should be avoided whenever possible. To disable the proxy built-in to Windows see, iTunes for Windows Can't access the Internet if proxy settings are incorrect.
If you are receiving a specific error message you may want to see, the "Specific Conditions and Alert Messages" section in this article as needed.
If the issue still persists, contact your internet service provider and confirm that the ports and servers in this article are enabled over your network.
The "hosts" file may be blocking the iTunes Store
Microsoft's article How do I reset the hosts file back to the default? has instructions and a "FixIt" to have Windows try to reset the hosts defaults for you.
Note: Some workplaces may put internal resources in the hosts file but may also use it to block iTunes Store.
To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions for your operating system below.

Best Practice Solution with 2 Internet Connections

Similar Messages

Maybe you are looking for