Best practice to shut down a router with SRE WAAS

Just want to get your opinion about shutting down a router that has WAAS on SRE module whether we'd better shut down the WAAS first or we can just simply turn off the router.
Please share your opinion on this.

I think most probably do the WAAS first, do a reload of the WAAS let it do a clean shutdown, then reload the router before the WAAS reloads, But we have had instances where the router shuts down ( power issuesat site) and it has not had any bad effects when it comes back up.

Similar Messages

HT4356 After shutting down my router and PC, I can get my iPad to wirelessly connect to my HP 3050A printer. After a period of time the connection is lost and I have to start all over shutting things down. The PCM never looses connection with the print

After shutting down the router and connected PC, I can get my iPad to connect to air print to my HP 3050A printer. Connection is lost after time and I have to start the whole process over again. Any ideas? Thanks.

Thanks for the response Grant. I had both set to "never" and the power connected. I did however find while searching the forum page, an answer already given to another enquiry. The security/general tab. I had it checked, now unchecked am hoping it will solve my problem. Thanks again, Cebustu.

Purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down. Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death" any suggestions?

purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down. Worked with the disk repair utility - fixed permissions to hold the power button till it shuts down. Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death" any suggestions?
My machine was patched to date 10.x.x. I was lucky to get an internet connection and I selected the option to re-download Lion... its curruently being downloaded. What if that doesn't work?
Any thougths would be appreciated.
Joe

And you have a workstation? not a notebook.
Usually a driver or hardware, nothing that Disk utility will fix.
You know of course what a Prohititory Sign is?
prohibitory sign, kernel panic
Forum devoted to Lion:
Mac OS X v10.7 Lion Communities
Tips and FAQs
FAQ kernelpanic
Resolving Kernel Panics
Avoiding eliminating Kernel panics
Lion App Compatibility Table - RoaringApps
RoaringApps Mac OS X Lion Application Compatibility
did you make sure your apps, drivers, and hardware support Lion?

In IE if I set the zoom at lets say 150% it will stay that way even if I shut down. But with firefox, it goes back to small print every time I view a new page. Is there a way to set the zoom to stay at a larger size? Thanks, EH

# Question
In IE if I set the zoom at lets say 150% it will stay that way even if I shut down. But with firefox, it goes back to small print every time I view a new page. Is there a way to set the zoom to stay at a larger size? Thanks, EH

If you need to adjust the font size on websites then look at:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r45
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

What is the best practice for using the Calendar control with the Dispatcher?

It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security. However, the Calendar relies on this endpoint to build the events for the calendar. On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works. We've noticed the same behavior on the Geometrixx site.
What is the best practice for using the Calendar control with Dispatcher?
Thanks in advance.
Scott

Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
Example: http://www.cariboowoodshop.com/wood-shop.html

Imac won't shut down, blue screen with spinig wheel is on and computer never shuts until I hold the power button down and shut it manualy..

Imac won't shut down,
blue screen with spinig wheel is on and computer never shuts until I hold the power button down and shut it manualy..

This is the instruction article for Intel-based Macs:
http://support.apple.com/kb/HT3964
Your profile does not indicate the type of Mac you are using.
Barry

My PC shuts down while synchronising with my iPhone.

My PC shuts down while synchronising with my iPhone. It happens when the music is being synchronised.
I already removed en reinstalled iTunes and synchronising with my iPad is not a problem.
Does anyone know what I can do to get my music on my iPhone?

Daniel did a guide on notebook cooling:
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-prevent-and-deal-with-overheating/td...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I am using Lan Card in Mac OS version Yosemite. When i remove Lan card it shut down system automatically with some message in chineze language. Before updating to yosemite it works fine.

I am using Lan Card in Mac OS version Yosemite. When i remove Lan card it shut down system automatically with some message in chineze language. Before updating to yosemite it works fine.

Sounds like a kernel panic. Lag the panic and post it here:
Mac OS X: How to log a kernel panic
BTW, this is the Mac Pro desktop forum.

"crash/shut down" type results with searches across large bundles

using Adobe Pro 10 and is experiencing "crash/shut down" type results with searches across large bundles (between 2000 to 2500 documents).

Moving this discussion to the Acrobat Installation & Update issues forum.

Best Practices for Integrating UC-5x0's with SBS 2003/8?

Almost all of Cisco's SBCS market is the small and medium business space. Most, if not all of these SMB's have a Microsoft Small Business Server 2003 or 2008. It will be critical, In order for Cisco to be considered as a purchase option, that the UC-5x0 integrates well into these networks.
To that end, I see a lot of talk here about how to implement parts and pieces of this, but no guidance from Cisco, no labs and no best practices or other documentation. If I am wrong, please correct me.
I am currently stumbling through and validating these configurations myself, Once complete, I will post detailed recommendations. However, it would have been nice to have a lab to follow instead of having to learn from each mistake.
Some of the challanges include;
1. Where should the UC-540 be placed: As the gateway for QOS or behind a validated UC-5x0 router/security appliance combination
2. Should the Microsoft Windows Small Business Server handle DCHP (as Microsoft's documentation says it must), or must the UC-540 handle DHCP to prevent loss of features? What about a DHCP relay scheme?
3. Which device should handle DNS?
My documentation (and I recommend that any Cisco Lab/Best Practice guidence include it as well) will assume the following real-world scenario, the same which applies to a majority of my SMB clients;
1. A UC-540 device utilizing SIP for the cost savings
2. High Speed Internet with 5 static routable IP addresses
3. An existing Microsoft Small Business Server 2003/8
4. An additional Line of Business Application or Terminal Server that utilizes the same ports (i.e. TCP 80/443/3389) as the UC-540 and the SBS, but on seperate routable IP's (Making up crazy non-standard port redirections is not an option).
5. A employee who teleworks from various places that provide a seat and a network jack, which is not under our control (i.e. a employees home, a clients' office, or a telework center). This teleworker should use the built in VPN feature within the SPA or 7925G phones because we will not have administrative access to any third party's VPN/firewall.
Your thoughs appreciated.

Progress Report;
The following changes have been made to the router in support of the previously detailed scenario. Everything appears to be working as intended.
DHCP is still on the UC540 for now. DNS is being performed by the SBS 2008.
Interestingly, the CCA still works. The NAT module even shows all the private mapped IP's, but no the corresponding public IP's. I wouldnt recommend trying to make any changes via the CCA in the NAT module.
To review, this configuration assumes the following;
1. The UC540 has a public IP address of 4.2.2.2
2. A Microsoft Small Business Server 2008 using an internal IP of 192.168.10.10 has an external IP of 4.2.2.3.
3. A third line of business application server with www, https and RDP that has an internal IP of 192.168.10.11 and an external IP of 4.2.2.4
First, backup your current configuration via the CCA,
Next, telent into the UC540, login, edit, cut and paste the following to 1:1 NAT the 2 additional public IP addresses;
ip nat inside source static tcp 192.168.10.10 25 4.2.2.3 25 extendable
ip nat inside source static tcp 192.168.10.10 80 4.2.2.3 80 extendable
ip nat inside source static tcp 192.168.10.10 443 4.2.2.3 443 extendable
ip nat inside source static tcp 192.168.10.10 987 4.2.2.3 987 extendable
ip nat inside source static tcp 192.168.10.10 1723 4.2.2.3 1723 extendable
ip nat inside source static tcp 192.168.10.10 3389 4.2.2.3 3389 extendable
ip nat inside source static tcp 192.168.10.11 80 4.2.2.4 80 extendable
ip nat inside source static tcp 192.168.10.11 443 4.2.2.4 443 extendable
ip nat inside source static tcp 192.168.10.11 3389 4.2.2.4 3389 extendable
Next, you will need to amend your UC540's default ACL.
First, copy what you have existing as I have done below (in bold), and paste them into a notepad.
Then, im told the best practice is to delete the entire existing list first, finally adding the new rules back, along with the addition of rules for your SBS an LOB server (mine in bold) as follows;
int fas 0/0
no ip access-group 104 in
no access-list 104
access-list 104 remark auto generated by SDM firewall configuration##NO_ACES_24##
access-list 104 remark SDM_ACL Category=1
access-list 104 permit tcp any host 4.2.2.3 eq 25 log
access-list 104 permit tcp any host 4.2.2.3 eq 80 log
access-list 104 permit tcp any host 4.2.2.3 eq 443 log
access-list 104 permit tcp any host 4.2.2.3 eq 987 log
access-list 104 permit tcp any host 4.2.2.3 eq 1723 log
access-list 104 permit tcp any host 4.2.2.3.35 eq 3389 log
access-list 104 permit tcp any host 4.2.2.4 eq 80 log
access-list 104 permit tcp any host 4.2.2.4 eq 443 log
access-list 104 permit tcp any host 4.2.2.4 eq 3389 log
access-list 104 permit udp host 116.170.98.142 eq 5060 any
access-list 104 permit udp host 116.170.98.143 any eq 5060
access-list 104 deny   ip 10.1.10.0 0.0.0.3 any
access-list 104 deny   ip 10.1.1.0 0.0.0.255 any
access-list 104 deny   ip 192.168.10.0 0.0.0.255 any
access-list 104 permit udp host 116.170.98.142 eq domain any
access-list 104 permit udp host 116.170.98.143 eq domain any
access-list 104 permit icmp any host 4.2.2.2 echo-reply
access-list 104 permit icmp any host 4.2.2.2 time-exceeded
access-list 104 permit icmp any host 4.2.2.2 unreachable
access-list 104 permit udp host 192.168.10.1 eq 5060 any
access-list 104 permit udp host 192.168.10.1 any eq 5060
access-list 104 permit udp any any range 16384 32767
access-list 104 deny   ip 10.0.0.0 0.255.255.255 any
access-list 104 deny   ip 172.16.0.0 0.15.255.255 any
access-list 104 deny   ip 192.168.0.0 0.0.255.255 any
access-list 104 deny   ip 127.0.0.0 0.255.255.255 any
access-list 104 deny   ip host 255.255.255.255 any
access-list 104 deny   ip host 0.0.0.0 any
access-list 104 deny   ip any any log
int fas 0/0
ip access-group 104 in
Lastly, save to memory
wr mem
One final note - if you need to use the Microsoft Windows VPN client from a workstation behind the UC540 to connect to a VPN server outside your network, and you were getting Error 721 and/or Error 800...you will need to use the following commands to add to ACL 104;
(config)#ip access-list extended 104
(config-ext-nacl)#7 permit gre any any
Im hoping there may be a better way to allowing VPN clients on the LAN with a much more specific and limited rule. I will update this post with that info when and if I discover one.
Thanks to Vijay in Cisco Tac for the guidence.

Mac OS X Leopard - iBook shuts down at 20% with no warning

Since I installed Leopard, my iBook's battery lasts for only 1 hour, compared to the 2 hours (or more) it used to last using Tiger. As if It wasn't enough, it shuts down with no warning at 20%, losing date & time settings and wireless networks passwords. Does anyone know what's causing the problem? Is Apple planing to solve it? Thanks

Have you tried the information in KB 86284, Calibrating your computer's battery for best performance?

What is the best way to shut down an iMac that has frozen during a data transfer? The disk I was writing to will not eject. Stopping "copy items to" doesn't work either_ it is frozen as well. Is there a way to force eject the disk so I can shut down?

Some more information on the above: OS: 7.2
1. None of the shutdown commands would work so I held the power button down and received a prompt that asked if I wished to force eject the drive, I selected
the force eject and then shut down.
2. Just recently I installed an eSATA _ Thunderbolt_ port multiplier compliant PCIe card (Seritek Q6G) into a thunderbolt external chassis (OWC Helios) (seritek Q6G).
This freeze data transfer also happened when I connected a Firmtek 5PM external tower to the iMac via thunderbolt cable.
The driver for the seritek Q6G was installed in the iMac previous to connection of any of the devices.
Both external towers mount ok on the iMac but have frozen during data transfer.
The initial freeze was with the Firmtek 5PM which is (JBOD)_ I thought that might have had something to do with the freeze_ it being JBOD_ so next I tried the Mercury Elite AL Pro Q2- which is formated in RAID 5. But then froze too.
Anybody have any experience with this?
Maybe I need another driver?
Or maybe some update to my OS?
Any suggestions welcomed.
Thank you

Hello BDAqua, thanx for the suggestions. Before I saw this reply I tried to first quit the finder and then to relaunch the Finder but that resulted was a blank gray screen.
In the end I ended up having to power down the iMac.
Fortunately the RAID array that was "active" seems to be fine and also has a firewire 800 connection so I can use it_ just not with thunderbolt until this issue is solved.
I'm going to check in the Applications>Utilities>system log to see if any clues are evident_ thank you for the suggestion.
PS: Nothing of note was obvious as a root cause in the Activity Monitor though.
hmmm....I was told that the Helios and seritek card were compatable and that the Helios didn't require any drivers..it will be a drag if there isn't an easy fix for this since this new PCIe card from seritek is the first to offer port multiplier compatibility for eSATA to thunderbolt...since they are both new I'm hoping that an OS upgrade will be the fix (presently7.2)...we shall see.

Best Practices when replacing 2003 server R2 with a new domainname and server 2012 r2 on same lan network

I have a small office (10 computers with five users) that have a Windows 2003 server that has a corrupted AD. Their 2003 server R2 is essentially a file server and provides authentication. They purchased a new Dell 2012 R2 server.
It seems easier to me to just create a new domain (using their public domain name).
But I need as little office downtime. as possible . Therefore I would like to promote this server to its new domain on the same lan as the current domain server. I plan to manually replicate the users and folder permissions. Once done, I plan to
remove the old server from the network and join the office computers to the new domain.
They also they are also running a legacy application that will require some tweaking by another tech. I have been hoping to prep the new domain prior to new legacy tech arriving. That is why I would like both domain to co-exist temporarily. I have read
that the major issues involved in this kind of temporary configuration will then be related to setting up dns. They are using the firewall to provide dhcp.
Are there any best practices documents for this situation?
Or is there a better or simpler strategy?
Gary Metz

I followed below two links. I think it should be the same even though the links are 2008 R2 migration steps.
http://kpytko.pl/active-directory-domain-services/adding-first-windows-server-2008-r2-domain-controller-within-windows-2003-network/
http://blog.zwiegnet.com/windows-server/migrate-server-2003-to-2008r2-active-directory-and-fsmo-roles/
Hope this help!

Best practice for oracle 10.2 RAC with ASM

Did any one tried/installed Oracle 10.2 RAC with ASM and CRS ?
What is the best practice?
1. separate home for CRS, ASM and Oracle Database?
2. separate home for CRS and same home for ASM and Oracle Darabase?
we set up the test environment with separate CRS, ASM and Oracle database homes, but we have tons of issues with the listener, spfile and tnsnames.ora files. So, seeking advise from the gurus who implimeted/tested the same ?

I am getting ready to install the 10gR2 database software (10gR2 Clusterware was just installed ) and I want to have a home for ASM and another for database as you suggest. I have been told that 10gR2 was to have a smaller set of binaries that can be used for the ASM home ... but I am not sure how I go about installing it. The first look at the installer does not seem to make it obvious...Is it a custom build option?

Best practice to host websites on xserve with mac os x server leopard.

Hi Guys,
I'm trying to optimize the xserve to host multiple joomla sites...
Can some one help me with "hidden manuals or using your experience" about best practices out there...!!
It'd be great on your part...
Cheers

Erm, Joomla site hosting 'just works' with Leopard Server site virtualisation and the built in mysql.
If you want the best practice try Mac OS X Server Essentials Second Edition which has chapters about setting up multiple web sites.

Best practice to shut down a router with SRE WAAS

Similar Messages

Maybe you are looking for