Best practices for making the end result web help printable

Hi all, using TCS3 Win 7 64 bit. All patched and up to date.
I was wondering what the best practices are for the following scenario:
I am authoring in Frame, link by reference into RH.
I use Frame to generate PDFs and RH to generate webhelp.
I have tons of conditional text which ultimately produce four separate versions of PDFs as well as online help - I handle these codes in FM and pull them into RH.
I use a css on all pages of my RH to make it 'look' right.
We now need to add the ability for end users to print the webhelp - outside of just CTRL+P because a)that cuts off the larger images and b)it doesn't show header, footer, logo, date, etc. (stuff that is in the master pages in FM).
My thought is doing the following:
Adding four sentences (one for each condition) in the FM book on the first page. Each one would be coded for audience A, B, C, or D (each of which require separate PDFs) as well as coded with ONLINE so that they don't show up in my printed PDFs that I generate out of Frame. Once the PDFs are generated, I would add a hyperlink in RH (manually) to each sentence and link the associated PDF (this seems to add the PDF file to the baggage files in RH). Then when I generate my RH webhelp, it would show the link, with the PDF, correctly based on the condition of the user looking at the help.
My questions are as follows:
1- This seems more complicated than it needs to be. Is it?
2- I would have to manually update every single hyperlink each time I update my FM book, because I am single sourcing out of Frame and I am unable (as far as I can tell) to link a PDF within the frame doc. I update the entire book (over 1500 pages) once every 6 weeks so while this wouldn't be a common occurrence it will happen regularly, and it would be manual (as far as I can tell)?
3- Eventually, I would have countless PDFs inside RH. I assume this will eventually impact performance. So this also doesn't seem ideal?
If anyone has thoughts/suggestions on a simpler way or better way to do this, I'd certainly appreciate it. I have watched the Adobe TV tutorial on adding a master page but that seems to remove the ability to use a css across all my topics and it also requires the manual addition of a manual hyperlink to the PDF file, so that is what I am proposing above, anyway (not sure the benefit, therefore).
Thanks in advance,
Adriana

Anything other than CTRL + P is going to create a lot of work so perhaps I can comment on what you see as drawbacks to that.
a)that cuts off the larger images and b)it doesn't show header, footer,
logo, date, etc. (stuff that is in the master pages in FM).
Larger images.
I simply make a point of keeping my image sizes down to a size that works. It's not a problem for me but that doesn't mean it will work for you. Here all I am doing is suggesting you review how big a problem that would be.
Master Page Details
I have to preface this with the statement that I don't work with FM. The details you refer to print when they are in RoboHelp master pages. Perhaps one of the FM users here can comment on how to get FM master pages to come through.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Best Practice for enhancing the SAP delivered standard WD ABAP application

Hi,
I am new to WebDypro ABAP.
To enhance the SAP delivered Standard WebDynpro Component (complex component with Business objects & powl).
Kindly let me know the best practice for enhancing the Standard WD ABAP from the below 1 or 2.
1) To copy & create a "Z" of the component & make changes in that (or)
2) to enhance directly on the same standard component without making "Z".
Regards,
NS

Hi NS,
If it is a standard component its better we go for enhancing the component rather than copying it into Z component.
If there is any issue with in the standard component , SAP supports it through notes and OSS messages. If it is a Z component, SAP doesn't support it.
If there is any up gradation of business packages, changes will be done to standard , but not the Z components, wherein we could miss it.
Further, since it is a standard component it might have been used at many places, changes that has to done to reflect all changes might be difficult in this case if it is a z component.
Regards,
Harsha

What is the best practice for using the Calendar control with the Dispatcher?

It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security. However, the Calendar relies on this endpoint to build the events for the calendar. On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works. We've noticed the same behavior on the Geometrixx site.
What is the best practice for using the Calendar control with Dispatcher?
Thanks in advance.
Scott

Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
Example: http://www.cariboowoodshop.com/wood-shop.html

Best practices for using the knowledge directory

Anyone know when it is best to store docs in the Knowledge Directory versus Collab? They are both searchable, but I guess you can publish from the Publisher to the KD. Anyone have any best practices for using the KD or setting up taxonomies in the KD?

Hi Richard,
If you need to configure dynamic pricing that may vary by tenant and/or if you want to set up cost drivers that are service item attributes, you should configure Billing Tables in the Demand Management module in 10.0.
The cost detail functionality in 9.4 will likely be changed to merged with the new pricing feature in 10.0. The current plan is not to bring cost detail into the Service Catalog module.

Best practices for using the 'cost details' fields

Hi
Please could you advise us to the best practices for using the 'cost details' field within Pricing. Currently I cannot find the way to surface the individual Cost Details fields within the Next Generation UI, even with the tick box for 'display both cost and price' ticked. It seems that these get surfaced when the Next Generation UI is turned off, but cannot find them when it is turned on. We can see the 'Pricing Summary' field but this does not fulfill our needs, as some of our services have both recurring and one-off costs.
Attached are some screenshots to further explain the situation.
Many thanks,
Richard Thornton

Hi Richard,
If you need to configure dynamic pricing that may vary by tenant and/or if you want to set up cost drivers that are service item attributes, you should configure Billing Tables in the Demand Management module in 10.0.
The cost detail functionality in 9.4 will likely be changed to merged with the new pricing feature in 10.0. The current plan is not to bring cost detail into the Service Catalog module.

What are the best practices for using the enhancement framework?

Hello enhancement framework experts,
Recently, my company upgraded to SAP NW 7.1 EhP6. This presents us with the capability to use the enhancement framework.
A couple of senior programmers were asked to deliver a guideline for use of the framework. They published the following statement:
"SAP does not guarantee the validity of the enhancement points in future releases/versions. As a result, any implemented enhancement points may require significant work during upgrades. So, enhancement points should essentially be used as an alternative to core modifications, which is a rare scenario.".
I am looking for confirmation or contradiction to the statement "SAP does not guarantee the validity of enhancement points in future releases/versions..." . Is this a true statement for both implicit and explicit enhancement points?
Is the impact of activated explicit and implicit enhancements much greater to an SAP upgrade than BAdi's and user exits?
Is there any SAP published guidelines/best practices for use of the enhancement framework?
Thank you,
Kimberly
Edited by: Kimberly Carmack on Aug 11, 2011 5:31 PM

Found an article that answers this question quite well:
[How to Get the Most From the Enhancement and Switch Framework as a Customer or Partner - Tips from the Experts|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0f0373e-a915-2e10-6e88-d4de0c725ab3]
Thank you Thomas Weiss!

Best Practices for Accessing the Configuration data Modelled as XML File in

Hi,
I refer the couple of blof posts/Forum threads on How to model and access the Configuration data as XML inside OSB.
One of the easiest and way is to
Re: OSB: What is best practice for reading configuration information
Another could be
Uploading XML data as .xq file (Creating .xq file copy paste all the Configuration as XML )
I need expert answers for following.
1] I have .xsd file which is representing the Configuration data. Structure of XSD is
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue</Config>
<FrameworkConfig>
2] As my project will move from one env to another the property-value will change according to the Environment...
For Dev:
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Dev</Config>
<FrameworkConfig>
For Stage :
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Stage</Config>
<FrameworkConfig>
3] Let say I create the following Folder structure to store the Configuration file specific for dev/stage/prod instance
OSB Project Folder
|
|---Dev
|
|--Dev_Config_file.xml
|
|---Stage
|
|--Stahe_Config_file.xml
|
|---Prod
|
|-Prod_Config_file.xml
4] I need a way to load these property file as xml element/variable inside OSb message flow.?? I can't use XPath function fn:doc("URL") coz I don't know exact path of XMl on deployed server.
5] Also I need to lookup/model the value which will specify the current server type(Dev/Stage/prod) on which OSB MF is running. Let say any construct which will act as a Global configuration and can be acccessible inside the OSb message flow. If I get the vaalue for the Global variable as Dev means I will load the xml config file under the Dev Directory @runtime containing key value pair for Dev environment.
6] This Re: OSB: What is best practice for reading configuration information
suggest the designing of the web application which will serve the xml file over the http protocol and getting the contents into variable (which in turn can be used in OSB message flow). Can we address this problem without creating the extra Project and adding the Dependencies? I read configuration file approach too..but the sample configuration file doesn't show entry of .xml file as resources
Hope I am clear...I really appreciate your comments and suggestion..
Sushil
Edited by: Sushil Deshpande on Jan 24, 2011 10:56 AM

If you can enforce some sort of naming convention for the transport endpoint for this proxy service across the environments, where the environment name is part of the endpoint you may able to retrieve it from $inbound in the message pipeline.
eg. http://osb_host/service/prod/service1 ==> Prod and http://osb_host/service/prod/service2 ==> stage , then i think $inbound/ctx:transport/ctx:uri can give you /service/prod/service1 or /service/stage/service1 and applying appropriate xpath functions you will be able to extract the environment name.
Chk this link for details on $inbound/ctx:transport : http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/context.html#wp1080822

Best practice for exporting the same disk to multiple guests?

I've got a T4-4 with two service domains. Each service domain has access to the same pool of SAN disks.
primary service domain has vds primary-vds0
secondary service domain has vds secondary-vds0
So far I've sucessfully built a single backend service for each SAN disk on each service domain and used the MP group operation to enable multipathing, i.e.
ldm add-vds primary-vds0_a primary
ldm add-vds secondary-vds0 secondary
ldm add-vdsdev mpgroup=target1 /dev/dsk/c0t6target1 target1@primary-vds0
ldm add-vdsdev mpgroup=target1 /dev/dsk/c0t6target1 target1@secondary-vds0
ldm add-vdisk id=0 bootdisk target1@primary-vds0 guest_a
Now, I have database datafile LUNS that I need to present to two guests at once since they're using Veritas clustering. As I understand it, what I have to present to each guest is a unique volume (volume@vds) export, and I can do it one of two ways:
Build mutiple exports of the same disk on the same vds:
ldm add-vds primary-vds0_a primary
ldm add-vds secondary-vds0 secondary
ldm add-vdsdev mpgroup=db1a /dev/dsk/c0c6target5 db1_server_a@primary-vds0
ldm add-vdsdev mpgroup=db1a /dev/dsk/c0c6target5 db1_server_a@secondary-vds0
ldm add-vdsdev mpgroup=db1b /dev/dsk/c0c6target5 db1_server_b@primary-vds0
ldm add-vdsdev mpgroup=db1b /dev/dsk/c0c6target5 db1_server_b@secondary-vds0
ldm add-vdisk id=6 database_disk db1_server_a@primary-vds0 guest_a
ldm add-vdisk id=6 database_disk db1_server_b@primary-vds0 guest_b
Build a separate vds for each guest domain, and then add the vdsdevs to each vds:
ldm add-vds primary-vds-server_a primary
ldm add-vds primary-vds-server_b primary
ldm add-vds secondary-vds-server_a secondary
ldm add-vds secondary-vds-server_b secondary
ldm add-vdsdev mpgroup=db1a /dev/dsk/c0c6target5 db_disk@primary-vds-server_a
ldm add-vdsdev mpgroup=db1a /dev/dsk/c0c6target5 db_disk@secondary-vds-server_a
ldm add-vdsdev mpgroup=db1b /dev/dsk/c0c6target5 db_disk@primary-vds-server_b
ldm add-vdsdev mpgroup=db1b /dev/dsk/c0c6target5 db_disk@secondary-vds-server_b
ldm add-vdisk id=6 database_disk db_disk@primary-vds-server_a guest_a
ldm add-vdisk id=6 database_disk db_disk@primary-vds-server_b guest_b
The end result is the same, but is there any advantage (performance, configuration management, whatever) to doing it one way versus the other?
Thanks!
Tim Metzinger

the standards for videoDVD are 720x480, and usually mpeg2 encoded..
so, your HiDef project HAS to be 'downsampled' somehow..
I would Export with Qucktime/apple intermediate => which is the 'format' your project is allready, and you avoid any useless 'inbetween encoding'..
iDVD will 'swallow' this huge export file - don't mind: iDVD cares for length, not size.
iDVD will then convert into DVD-standards..
you can 'raise' quality, by using projects <60min - this sets iDVD automatically to highest technical possible bitrate
hint: judge pic quality on a DVDplayer + TV.. not on your computer (DVDs are meant for TVdelivery)

Best practices for customizing the standard OBIA metedata repository (RPD)

Hello
Is there a Best practices document published by oracle or a partner that talks about best practices for customizing OBIA out-of-box RPD. I am specifically looking for guidance around:
1. adding new objects to physical layer or modifying an exisitng table definition to add more columns
2. Building new Logical columns in BMM layer
3. Modifying the exisitng Subject areas.
Thanks

There is a very good presentation by Rittman mead on extending and customizing BI Applications. Refer to this link (http://www.rittmanmead.com/files/OOW2008%20-%20Extending%20and%20Customizing%20the%20BI%20Apps%20Data%20Warehouse.pdf ).
Thanks,
-Amith.

Best practice for making changes to Oracle apps business views and BAs/fold

HI
The oracle BI solution comes with pre-defined Business Views- database views and Business Areas and folders. If we want to customize those database views or BAs and folders what will be the best practice in order to avoid losing it during any upgrades.
For ex Oracle out-of box Order Management BA that we are using heavily needs some additional fields to be added to Order Header and Order Lines folders and we also want to add some custom folders to this BA.
If we do the changes to the database views behind this BA would they be lost during the upgrade or do we have to copy(duplicate) those views, updated them and create a custom BA and folders against those views.
Thanks

Hi,
If you are adding new folders then just add them to the Oracle Business Area. The business area is just a collection of folders. If the business area was changed in an upgrade the new folder would not be deleted.
If you want to add fields to the existing folders/views then you have 2 options. Add the field to the defining base view (these are the views beginning OEBV and OEFV) and then regenerate the business views. This may be overwritten if the view is upgrade but this is unlikely.
Alternatively, copy the view to create a new version and then map the old folder to the new view and refresh. You may need to re-map the folder if the folder is upgraded, but at least you have a single folder used by both Oracle and custom reports.
Rod West

Best practice for replicate the IDM (OIM 11.1.1.5.0) environment

Dear,
I need to replicate the IDM production to build the IDM test environment. I have the OIM 11.1.1.5.0 in production with lots of custom codes.
I have two approaches:
approach1:
Manually deploy the code through Jdeveloper and export and import all the artifacts. Issue is this will require a lot of time and resolving dependencies.
approach2:
Take the OIM, MDS and SOA schemas export and Import the same into new IDM Test DB environment.
could you please suggest me what is the best practice and if you have some pointers to achieve the same.
Appreciate your help.
Thanks,

Follow your build document for the same steps you used to build production.
You should know where all your code is. You can use the deployment manager to export your configurations. Export customized files from MDS. Just follow the process again, and you will have a clean instance not containing production data.
It only takes a lot of time if your client is lacking documentation or if you re not familiar with all the parts of the environment. What's 2-3 hours compared to all the issues you will run into if you copy databases or import/export schemas?
-Kevin

2K8 - Best practice for setting the DNS server list on a DC/DNS server for an interface

We have been referencing the article
"DNS: DNS servers on <adapter name> should include their own IP addresses on their interface lists of DNS servers"
http://technet.microsoft.com/en-us/library/dd378900%28WS.10%29.aspx but there are some parts that are a bit confusing. In particular is this statement
"The inclusion of its own IP address in the list of DNS servers improves performance and increases availability of DNS servers. However, if the DNS server is also a domain
controller and it points only to itself for name resolution, it can become an island and fail to replicate with other domain controllers. For this reason, use caution when configuring the loopback address on an adapter if the server is also a domain controller.
The loopback address should be configured only as a secondary or tertiary DNS server on a domain controller.”
The paragraph switches from using the term "its own IP address" to "loopback" address. This is confusing becasuse technically they are not the same. Loppback addresses are 127.0.0.1 through 127.255.255.255. The resolution section then
goes on and adds the "loopback address" 127.0.0.1 to the list of DNS servers for each interface.
In the past we always setup DCs to use their own IP address as the primary DNS server, not 127.0.0.1. Based on my experience and reading the article I am under the impression we could use the following setup.
Primary DNS: Locally assigned IP of the DC (i.e. 192.168.1.5)
Secondary DNS: The assigned IP of another DC (i.e. 192.168.1.6)
Tertiary DNS: 127.0.0.1
I guess the secondary and tertiary addresses could be swapped based on the article. Is there a document that provides clearer guidance on how to setup the DNS server list properly on Windows 2008 R2 DC/DNS servers? I have seen some other discussions
that talk about the pros and cons of using another DC/DNS as the Primary. MS should have clear guidance on this somewhere.

Actually, my suggestion, which seems to be the mostly agreed method, is:
Primary DNS: Locally assigned IP of the DC (i.e. 192.168.1.5)
Secondary DNS: The assigned IP of another DC (i.e. 192.168.1.6)
Tertiary DNS: empty
The tertiary more than likely won't be hit, (besides it being superfluous and the list will reset back to the first one) due to the client side resolver algorithm time out process, as I mentioned earlier. Here's a full explanation on how
it works and why:
This article discusses:
WINS NetBIOS, Browser Service, Disabling NetBIOS, & Direct Hosted SMB (DirectSMB).
The DNS Client Side Resolver algorithm.
If one DC or DNS goes down, does a client logon to another DC?
DNS Forwarders Algorithm and multiple DNS addresses (if you've configured more than one forwarders)
Client side resolution process chart
http://msmvps.com/blogs/acefekay/archive/2009/11/29/dns-wins-netbios-amp-the-client-side-resolver-browser-service-disabling-netbios-direct-hosted-smb-directsmb-if-one-dc-is-down-does-a-client-
logon-to-another-dc-and-dns-forwarders-algorithm.aspx
DNS
Client side resolver service
http://technet.microsoft.com/en-us/library/cc779517.aspx
The DNS Client Service Does Not Revert to Using the First Server in the List in Windows XP
http://support.microsoft.com/kb/320760
Ace Fekay
MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007 & Exchange 2010, Exchange 2010 Enterprise Administrator, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.
I agree with this proposed solution as well:
Primary DNS: Locally assigned IP of the DC (i.e. 192.168.1.5)
Secondary DNS: The assigned IP of another DC (i.e. 192.168.1.6)
Tertiary DNS: empty
One thing to note, in this configuration the Best Practice Analyzer will throw the error:
The network adapter Local Area Connection 2 does not list the loopback IP address as a DNS server, or it is configured as the first entry.
Even if you add the loopback address as a Tertiary DNS address the error will still appear. The only way I've seen this error eliminated is to add the loopback address as the second entry in DNS, so:
Primary DNS: The assigned IP of another DC (i.e. 192.168.1.6)
Secondary DNS: 127.0.0.1
Tertiary DNS: empty
I'm not comfortable not having the local DC/DNS address listed so I'm going with the solution Ace offers.
Opinion?

What is best practice for calling XI Services with Web Dynpro-Java?

We are trying to expose XI services to Web Dynpro via "Web Services". Our XI developers have successfully generated the WSDL file(s) for their XI services and handed off to the Web Dynpro developers.
The Java developers put the WSDL file to their local PC's and import as "Adaptive Web Services" data models. When the application is constructed and deployed to our development box, the application abends because the J2EE server on that box cannot locate the WSDL file at runtime (it was on the developers box at, say, "C:\temp\" and that directory does not exist on the dev server).
Since XI does not have a way of directly associating the generated WSDL file to the XI service, where is the best place to put the WSDL so it is readable at design time and at run time? Also, how do we reconcile that we'll have 3 WSDL files for each service (one for Dev, one for QA and one for Prod) and how is the model in Web Dynpro configured so it gets the right ome?
Does anyone have any good guide on how to do this? Have found plenty of "how to consume a Web Service in Web Dynpro" docs on SDN, but these XI services are not really traditional Web Services so the instructions break down when it comes time to deploy.

HI Bob,
As sometimes when you create a model using a local wsdl file then instead of refering to URL mentioned in wsdl file it refers to say, "C:\temp" folder from where you picked up that file. you can check target address of logical port. Due to this when you deploy application on server it try to search it in "c:\temp" path instead of it path specified at soap:address location in wsdl file.
Best way is re-import your Adaptive Web Services model using the URL specified in wsdl file as soap:address location.
like http://<IP>:<PORT>/XISOAPAdapter/MessageServlet?channel<xirequest>
or you can ask you XI developer to give url for webservice and username password of server

Best Practice for making material obselete

Hai Experts,
Could any one please advice me what s the best practice to make a material obselete. Is there any best practice or incase if it is not there what would be the diff ways it cant be made obselete.
Please advice me on this.
Thanking you in advance
Regards,
Gopalakrishnan.S

Archiving is a process, rather than a transaction. you have to take care that you fulfill local laws and retain your data for x years for internal and external auditors.
archiving requires customizing, you have to tell SAP where your archive is and what name it has and how big it can be, and when (definition of retention period) a document can be archived.
you have to talk with your business how long they want the data keep in the production system (this depends on how long they need to run reports on this data)
you have to define who can access the archived data and how this data is accessed.
Who runs archiving?
Tough question. Data owner is the business, so they should run.
But archiving just buckets fragments your tables.
so many companies have a person who is fulltime responsible for archiving and does it for all business units and organisations.
Archiving is nothing what can be done "on the fly", you will encounter all kind of errors, processes that are not designed well will certainly create a lot problems in archiving and need to be reworked.
I had an archving project with 50 days project time, and could develope guidelines to archive about 30 different objects. there are 100 more objects possible, and we have still not archived master data like material, vendors and customers because of so many dependencies and object that need to be archived prior to those objects.

Best practice for low bandwidth end-users

Hey guys,
I'm new to CS and am about halfway through my planning stages for a web app.
My end users will be predominantly on 256k-512k connections (yeh I know it sucks, but this is regional/rural Australia) and a fairly large proportion of those are going to be on satellite which is incredibly latent.
Does anyone have some tips on keeping it lean and mean regarding coding or have any experience's they'd mind sharing?
Cheers

At JavaOne, I attended a great technical session on extreme web caching. He talked about ways to make sure the browsers cache the static information, such as images.
Web Caching is very important for high traffic, high performance web site but few people know all the professional-level strategies. In this talk I'll share some of the tricks of the trade, including advanced tips from Yahoo's Mike Radwin.
To get a good intro to cross-browser web caching techniques check out the caching tutorial at www.mnot.net.

Best practices for making the end result web help printable

Similar Messages

Maybe you are looking for