Best Practices for Payroll Conversions

Hi All
We are currently trying to do data conversion at a client with 100,000 + Employees. We are trying load the tables
T558B - Payroll Periods
T558C - Payroll Account Transfer: Old Wage Types
T5U8C - Transfer external payroll results (USA)
for all the YTD taxes for the Employees.
We have designed LSMW's using Transaction code SM30 to load all the Employees. When we are loading using SM30, it is taking a very long time. Can anyone suggest, if this is the Best practice, or if there is an alternate way to load all these data into SAP without using SM30.
Please let me know
Thank you
Deepthi
Note: I have checked SAP Best practice and that document uses SM30 transaction recording

Hi,
In implementing any LO module, generally the following are the points to be taken in mind.
1. Base level have a ODS to load data from R/3. This ensure that you have exact data content as that in R/3. This can be a write optimized.
2. Second level have an ODS along with the transformation and modification of data based on the business and functional requirement and enhancments.
3. Finally have a cube to consolidate the data and make it available for reporting.Create all the reports based on the cube.
Hope this gives an idea.
Regards,
akhan
Edited by: Akhan_BI on Sep 5, 2009 12:41 AM

Similar Messages

SAP Best Practices for Payroll

Hi Gurus,
We have a SAP ECC6.0 version installed at our client side. My Client is developing a software for SAP Payroll. They want to run Payroll in their SAP system to figure out few things. SAP has recommended to install SAP Best Practices for HCM to get some test data. My questions to you all are:-
1) SAP best Practices do provide preconfigured settings and some amount of Test Data. How will I install SAP Best Practices for HCM at my client System. Please do tell me in detail because I dont have any knowledge how to proceed as I a SAP HCM functional consultant. We dont have any basis consultant in our team.
2) How long it can take to install SAP Best Practices for HCM and the complete proceedure to do it?
3) Is it true that the test data provided by SAP BP and the pre configured base settings will be sufficient to run Payroll. Mind it,my client does not want to run payroll as per their needs,they just want to see how it is run in SAP with the SAP test data.
I would really appreciate if you guyz can provide me any knowledge related to this matter.
Thanks a ton
Sanchit Gupta

Friend
You should visit www.service.sap.com (you need login and passwd ) and search under EUROPE.
or try in www.help.sap.com.
Regards
Renu

Best Practice for Conversion Workflow

Hello,
I'm converting video files from our "home grown" virtual media reserve to iTunes U. Some of the files are in RM format, some are already compressed .mov's (not H.264) and some I have the original DV files for.
Anyone out there have a best practice for converting these file types for posting to iTunes U? I have Final Cut Studio (Compressor), QT Pro and Squeeze available to me.
Any experience you have with this would be helpful.
Thanks,
Jeana

For converting old files to a podcast compatible video and based on the machine you have, consider elgato turbo.264. It is a fairly priced "co-processor" for video conversion. It is comprised of an application and a small USB device with a encoder chip in it. In my experience, it is the fastest way to create podcast video files. The amount of time that you will save will pay for the device quickly (about $100). Plus it does batch conversion of any video that your system currently plays through QuickTime. it has all the necessary presets and you can create your own. It has a few minor limitations such as not supporting (at this moment) enhanced podcasting features such as chapter markers and closed-captions but since you have old files for conversion, that won't matter.
For creating new content, the workflow varies a lot. Since you mention MP3s, I guess you are also interested in audio files. I would stick with GarageBand, especially if you are a beginner plus it supports enhanced podcasts.
In any case the most important goal is to have the simplest and fastest way to go from recording to publication. The less editing the better. To attain that, the best methods will require the largest investments. For example, for video production the best way is to produce the content live so when you finish recording it is only a matter of encoding and publishing. that will require the use of a video switcher that can ingest at least one video camera and a computer output to properly capture presentation material. That's the minimum. there are several devices that can do this for you. Some are disguised PCs and some connect to a PC for tapeless recording. You can check the Tricaster, which I like but wish it was a Mac and not a Windows Xp PC. Other routes may include video mixers from manufacturers like Edirol, Pansonic or Sony connected to a VTR or directly to a Mac for direct-ti-disc capture. I f you look at some of the content available in iTunes U, you will see what I explain here. This workflow requires preparation and sufficient live support but you will have your material ready for delivery almost immediately after the recorded event. No editing required. Finally, the most intensive workflow is to record everything separately and edit it later, which is extremely time consuming.

Best practice for importing non-"Premiere-ready" video files

Hello!
I work with internal clients that provide me with a variety of differnet video types (could be almost ANYTHYING, WMV, MP4, FLV). I of course ask for AVIs when possible, but unfortunately, I have no control over the type of file I'm given.
And, naturally, Premiere (just upgraded to CS5) has a hard time dealing with these files. Unpredictable, ranging from working fine to not working at all, and everything in between. Naturally, it's become a huge issue for turnaround time.
Is there a best practice for preparing files for editing in Premiere?
I've tried almost everything I can think of: converting the file(s) to .AVIs using a variety of programs/methods. Most recently, I tried creating a Watch Folder in Adobe Media Encoder and setting it for AVI with the proper aspect ratio. It makes sense to me that that should work:using an Adobe product to render the file into something Premiere can work with.
However, when I imported the resulting AVI into Premiere, it gave me the Red Line of Un-renderness (that is the technical term, right?), and had the same sync issue I experienced when I brought it in as a WMV.
Given our environment, I'm completely fine with adding render time to the front-end of projects, but it has to work. I want files that Premiere likes.
THANK YOU in advance for any advice you can give!
-- Dave

I use an older conversion program (my PrPro has a much older internal AME, unlike yours), DigitalMedia Converter 2.7. It is shareware, and has been replaced by Deskshare with newer versions, but my old one works fine. I have not tried the newer versions yet. One thing that I like about this converter is that it ONLY uses System CODEC's, and does not install its own, like a few others. This DOES mean that if I get footage with an oddball CODEC, I need to go get it, and install it on the System.
I can batch process AV files of most types/CODEC's, and convert to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio and at 29.97 FPS (I am in NTSC land). So far, 99% of the resultant converted files have been perfect, whether from DivX, WMV, MPEG-2, or almost any other format/CODEC. If there is any OOS, my experience has been that it will be static, so I just have to adjust the sync offset by a few frames, and that takes care of things.
In a few instances, the PAR flag has been missed (Standard 4:3 vs Widescreen 16:9), but Interpret Footage has solved those few issues.
Only oddity that I have observed (mostly with DivX, or WMV's) is that occasionally, PrPro cannot get the file's Duration correct. I found that if I Import those problem files into PrElements, and then just do an Export, to the same exact specs., that resulting file (seems to be 100% identical, but something has to be different - maybe in the header info?) Imports perfectly into PrPro. This happens rarely, and I have the workaround, though it is one more step for those. I have yet to figure out why one very similar file will convert with the Duration info perfect, and then a companion file will not. Nor have I figured out exactly what is different, after running through PrE. Every theory that I have developed has been shot down by my experiences. A mystery still.
AME works well for most, as a converter, though there are just CODEC's, that Adobe programs do not like, such as DivX and Xvid. I doubt that any Adobe program will handle those suckers easily, if at all.
Good luck,
Hunt

Best practice for exporting from iMovie '08 to iDVD

I am looking to find out what is the best practice for exporting from iMovie '08 to iDVD. I have read the other postings that give the basic howto (export to Media Browser then select the video in iDVD). However, my question is a little more technical. I have 1080i HD projects. I am interested in burning them to DVD in the best possible quality. What setting should I be using when I publish to Media Browser?
I am wondering about quality loss due to more than one conversion/compression. I suspect that when I export to the Media Browser then this is occurring. If I am not mistaken iMovie is using something like H.264 for this. Then, when I run iDVD I suspect it will it do another conversion/compression, I think to get to MPEG2. Not only could this result in a loss of quality but also it will take extra time. I am interested to know what others think about this.
Finally, I am looking to create DVDs for a lot of video. I am wondering if there are any USB or firewire hardware devices out there that could speed up the compression. I use the Elgato Turbo.264 when I want to encode to H.264 but I wonder if there is something similar for DVD creation.
Thanks in advance.

the standards for videoDVD are 720x480, and usually mpeg2 encoded..
so, your HiDef project HAS to be 'downsampled' somehow..
I would Export with Qucktime/apple intermediate => which is the 'format' your project is allready, and you avoid any useless 'inbetween encoding'..
iDVD will 'swallow' this huge export file - don't mind: iDVD cares for length, not size.
iDVD will then convert into DVD-standards..
you can 'raise' quality, by using projects <60min - this sets iDVD automatically to highest technical possible bitrate
hint: judge pic quality on a DVDplayer + TV.. not on your computer (DVDs are meant for TVdelivery)

Best Practices for Export

I have recently begun working with a few AIC-encoded home movie files in FCPX. My goal is to compress them using h.264 for viewing on computer screens. I had a few questions about the best practices for exporting these files, as I haven't worked with editing software in quite some time.
1) Is it always recommended that I encode my video in the same resolution as its source? For example, some of my video was shot at 1440x1080, which I can only assume is anamorphic. I originally tried to export at 1920x1080 but then changed my mind as I assumed the 1440x1080 would just stretch naturally. Does this sound right?
2) FCPX is telling me that a few of my files are in 1080i. I'd like to encode them in 1080p as it tends to look better on computer screens. In FCPX, is it as simple as dragging my interlaced footage into a progressive timline and then exporting? I've heard about checking the "de-interlace" box under clip settings and then doubling the framerate but that seemed to make my video look worse.
3) I've heard that it might be better practice to export my projects as master files and then encode h.264 in Compressor. Is there any truth to this? Might it be better for the interlaced to progressive conversion as well?
Any assistance is greatly appreciated.

1) yes. 1440 will display ax 1920.
2) put everything in a 1080p project.
3) Compressor will give you more options for control. The h264 from FCP is a very high data rate and makes large files.

Best Practices for Implementing Cryptographic VPN

With Marcin Latosiewicz
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about implementing cryptographic VPN and how to prepare it for the future with expert Marcin Latosiewicz.
Marcin will share his best practices for implementing cryptographic VPN as well as advise those customers who are looking to build a new or update their existing setups how to maximize their potential. Additionally, Marcin will provide insight into which technologies could be applicable for new deployments and exciting new technologies that will be available in the next few months.
Marcin Latosiewicz is a customer support engineer at the Cisco® Technical Assistance Center in Belgium, with more than 6 years of experience with Cisco Security products and technologies including IPsec, VPN, internetworking appliances, network and system security, Internet services, and Cisco networking equipment. Prior to joining Cisco, he operated, administered, and ran UNIX and Microsoft networks for 14 years. Latosiewicz holds bachelors and masters degrees in engineering from Warsaw University of Technology. He also holds CCIE® certification in Security (No. 25784) and CCDP® certification.
Remember to use the rating system to let Marcin know if you've received an adequate response.
Because of the volume expected during this event, Marcin might not be able to answer every question. Remember that you can continue the conversation in the Security community, subcommunity, VPN, shortly after the event. This event lasts through September 20, 2013. Visit this forum often to view responses to your questions and those of other Cisco Support Community members.

Jouni,
Good question. And answer is complex, there is in depth and there is in depth.
Most people would be satisfied by reading a summary of all the different components - encryption, hashing, signing, PKI, how IPsec and SSL/TLS work. This group also counts most of security CCIEs.
To this extent CCIE Security Study Guide (by Henry Benjamin) was a good read, if a bit outdated today.
Most people who are in depth will look first into specification.
RFC 4301 (IPsec architecture)
RFC 2246 (TLS 1.0)
Are a good start and contain references to other documents worth reading.
This is where the good folks will base their knowledge of off.
The really in depth people will look into the math behind it and will conquer topics like
Elliptic Curve Crypto ( http://en.wikipedia.org/wiki/Elliptic_curve_cryptography ) and difference between CCM, GCM and CCB, to which you have really good materials published by universities.
There are relatively a few who know this.
To start with I can suggest:
- http://www.cl.cam.ac.uk/~rja14/book.html (Ross' Anderson book is free, informative and suprisngly entertaining, this is a definitely a must-read for security/VPN).
- Have a look at books recommended by Richard Bejtlich or Bruce Scheiner - while they might not be VPN specific it's a good security read most of the time.
I'll have a look at the books at home see which one can be interesting to read, and edit this post.
M.

Best practices for setting up users on a small office network?

Hello,
I am setting up a small office and am wondering what the best practices/steps are to setup/manage the admin, user logins and sharing privileges for the below setup:
Users: 5 users on new iMacs (x3) and upgraded G4s (x2)
Video Editing Suite: Want to connect a new iMac and a Mac Pro, on an open login (multiple users)
All machines are to be able to connect to the network, peripherals and external hard drive. Also, I would like to setup drop boxes as well to easily share files between the computers (I was thinking of using the external harddrive for this).
Thank you,

Hi,
Thanks for your posting.
When you install AD DS in the hub or staging site, disconnect the installed domain controller, and then ship the computer to the remote site, you are disconnecting a viable domain controller from the replication topology.
For more and detail information, please refer to:
Best Practices for Adding Domain Controllers in Remote Sites
http://technet.microsoft.com/en-us/library/cc794962(v=ws.10).aspx
Regards.
Vivian Wang

Best-practice for Catalog Views ? :|

Hello community,
A best practice question:
The situtation: I have several product categories (110), several items in those categories (4000) and 300 end-users. I would like to know which is the best practice for segment the catalog. I mean, some users should only see categories 10,20 & 30. Other users only category 80, etc. The problem is how can I implement this ?
My first idea is:
1. Create 110 Procurement Catalogs (1 for every prod.category). Each catalog should contain only its product category.
2. Assign in my Org Model, in a user-level all the "catalogs" that the user should access.
Do you have any idea in order to improve this ?
Saludos desde Mexico,
Diego

Hi,
Your way of doing will work, but you'll get maintenance issues (to many catalogs, and catalog link to maintain for each user).
The other way is to built your views in CCM, and assign these views to the users, either on the roles (PFCG) or on the user (SU01). The problem is that with CCM 1.0 this is limitated, cause you'll have to assign one by one the items to each view (no dynamic or mass processes), it has been enhanced in CCM 2.0.
My advice:
-Challenge your customer about views, and try to limit the number of views, with for example strategic and non strategic
-With CCM 1.0 stick to the procurement catalogs, or implement BADIs to assign items to the views (I experienced it, it works, but is quite difficult), but with a limitated number of views
Good luck.
Vadim

Best Practice for Securing Web Services in the BPEL Workflow

What is the best practice for securing web services which are part of a larger service (a business process) and are defined through BPEL?
They are all deployed on the same oracle application server.
Defining agent for each?
Gateway for all?
BPEL security extension?
The top level service that is defined as business process is secure itself through OWSM and username and passwords, but what is the best practice for security establishment for each low level services?
Regards
Farbod

It doesnt matter whether the service is invoked as part of your larger process or not, if it is performing any business critical operation then it should be secured.
The idea of SOA / designing services is to have the services available so that it can be orchestrated as part of any other business process.
Today you may have secured your parent services and tomorrow you could come up with a new service which may use one of the existing lower level services.
If all the services are in one Application server you can make the configuration/development environment lot easier by securing them using the Gateway.
Typical probelm with any gateway architecture is that the service is available without any security enforcement when accessed directly.
You can enforce rules at your network layer to allow access to the App server only from Gateway.
When you have the liberty to use OWSM or any other WS-Security products, i would stay away from any extensions. Two things to consider
The next BPEL developer in your project may not be aware of Security extensions
Centralizing Security enforcement will make your development and security operations as loosely coupled and addresses scalability.
Thanks
Ram

Best practice for multi-language content in common areas

I've got a site with some text in header/footer/nav that needs to be translated between an English and Spanish site, which use the same design. My intention was to set up all the text as content to facilitate. However, if I use a standard dialog with the component's path set to a child of the current page node, I would need to re-enter the text on every page. If I use a design dialog, or a standard dialog with the component's path set absolutely, the Engilsh and Spanish sites will share the same text. If I use a standard dialog with the component's path set relatively (eg path="../../jcr:content/myPath"), the pages using the component would all need to be at the same level of the hierarchy.
It appears that the Geometrixx demo doesn't address this situation, and leaves copy in English. Is there a best practice for this scenario?

I'm finding that something to the effect of <cq:include path="<%= strCommonContentPath + "codeEntry" %>" resourceType ...
works fine for most components, but not for parsys, or a component containing a parsys. When I attempt that, I get a JS error that says "design.path is null or not an object". Is there a way around this?

Best Practice for utility in Sol Man 4.0

We have software component ST-ICO of release 150_700 with Patch level 5
We want a Template Selection for Utility industry. I checked in
the service market place and found that 'Baseline Package United
Kingdom V1.50, Template: BP_BLKU150' is available in the above software
component.
But we are not getting any templates other than 'BP_UTUS147 - Best Practices for Water Utility' in the 'SOLAR_PROJECT_ADMIN'
transaction.
Kindly suggest any patch needs to be applied or some configuration need to be done.
Regards
Mani

Hi Mani,
Colud u plz give me the link of "where u find the template BP_BLKU150"?
It will be helpful for me.
Thanks
Senthil

Best Practices for SRM Installation !!

Hi
can someone share the best Practices for SRM Installation ?
What is the typical timeframe to install SRM on development server and as well as on the Production server ?
Appericiate the responses
Thanks,
Arvind

Hi
I don't know whether this will help you.
See these links as well.
<b>http://help.sap.com/bp_epv170/EP_US/HTML/Portals_intro.htm
http://help.sap.com/bp_scmv150/index.htm
http://help.sap.com/bp_biv170/index.htm
http://help.sap.com/bp_crmv250/CRM_DE/index.htm</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

Best practices for ARM - please help!!!

Hi all,
Can you please help with any pointers / links to documents describing best practices for "who should be creating" the GRC request in below workflow of ARM in GRC 10.0??
Create GRC request -> role approver -> risk manager -> security team
options are : end user / Manager / Functional super users / security team.
End user and manager not possible- we can not train so many people. Functional team is refusing since its a lot of work. Please help me with pointers to any best practices documents.
Thanks!!!!

In this case, I recommend proposing that the department managers create GRC Access Requests. In order for the managers to comprehend the new process, you should create a separate "Role Catalog" that describes what abilities each role enables. This Role Catalog needs to be taught to the department Managers, and they need to fully understand what tcodes and abilities are inside of each role. From your workflow design, it looks like Role Owners should be brought into these workshops.
You might consider a Role Catalog that the manager could filter on and make selections from. For example, an AP manager could select "Accounts Payable" roles, and then choose from a smaller list of AP-related roles. You could map business functions or tasks to specific technical roles. The design flaw here, of course, is the way your technical roles have been designed.
The point being, GRC AC 10 is not business-user friendly, so using an intuitive "Role Catalog" really helps the managers understand which technical roles they should be selecting in GRC ARs. They can use this catalog to spit out a list of technical role names that they can then search for within the GRC Access Request.
At all costs, avoid having end-users create ARs. They usually select the wrong access, and the process then becomes very long and drawn out because the role owners or security stages need to mix and match the access after the fact. You should choose a Requestor who has the highest chance of requesting the correct access. This is usually the user's Manager, but you need to propose this solution in a way that won't scare off the manager - at the end of the day, they do NOT want to take on more work.
If you are using SAP HR, then you can attempt HR Triggers for New User Access Requests, which automatically fill out and submit the GRC AR upon a specific HR action (New Hire, or Termination). I do not recommend going down this path, however. It is very confusing, time consuming, and difficult to integrate properly.
Good luck!
-Ken

Best Practices For Household IOS's/Apple IDs

Greetings:
I've been searching support for best practices for sharing primarily apps, music and video among multple iOS's/Apple IDs. If there is a specific article please point me to it.
Here is my situation:
We currently have 3 iPads (2-kids, 1-dad) in the household and one iTunes account on a win computer. I previously had all iPads on single Apple ID/credit card and controlled the kids' downloads thru the Apple ID password that I kept secret. As the kids have grown older, I found myself constantly entering my password as the kids increased there interest in music/apps/video. I like this approach because all content was shared...I dislike because I was constantly asked to input password for all downloads.
So, I recently set up an individual account for them with the allowance feature at iTunes that allows them to download content on their own (I set restrictions on their iPads). Now I have 3 Apple IDs under one household.
My questions:
With the 3 Apple IDs, what is the best way to share apps,music, videos among myself and the kids? Is it multiple accounts on the computer and some sort of sharing?
Thanks in advance...

Hi Bonesaw1962,
We've had our staff and students run iOS updates OTA via Settings -> Software Update. In the past, we put a DNS block on Apple's update servers to prevent users from updating iOS (like last fall when iOS 7 was first released). By blocking mesu.apple com, the iPads weren't able to check for or install any iOS software updates. We waited until iOS 7.0.3 was released before we removed the block to mesu.apple.com at which point we told users if they wanted to update to iOS 7 they could do so OTA. We used our MDM to run reports periodically to see how many people updated to iOS 7 and how many stayed on iOS 6. As time went on, just about everyone updated on their own.
If you go this route (depending on the number of devices you have), you may want to take a look at Caching Server 2 to help with the network load https://www.apple.com/osx/server/features/#caching-server . From Apple's website, "When a user on your network downloads new software from Apple, a copy is automatically stored on your server. So the next time other users on your network update or download that same software, they actually access it from inside the network."
I wish there was a way for MDMs to manage iOS updates, but unfortunately Apple hasn't made this feature available to MDM providers. I've given this feedback to our Apple SE, but haven't heard if it is being considered or not. Keeping fingers crossed.
Hope this helps. Let us know what you decide on and keep us posted on the progress. Good luck!!
~Joe

Best Practices for Payroll Conversions

Similar Messages

Maybe you are looking for