Best practices for search service in a sharepont farm

Hi
in a sharepoint web application there is many BI dashboards are deployed and also we have plan to
configure enterprise search for this application.
in our sharepoint 2010 farm we have
2 application server s
2 WFE servers
here one application server is running
c.a + webanalytics service and itself is a domain controller
second application server is for only running secure store service+ Performance point service only
1 - here if we run search server service in second application server can any issues to BI performance and
2 - its best practice to run Performance point service and search service in one server
3 -also is it best practice to run search service in a such a application server where already other services running
and where we have only one share point web application need to be crawled and indexed with below crawl schedule.
here we only run full crawl per week and incremental crawl at midnight daily
adil

Hi adil,
Based on your description, you want to know the best practices for search service in a SharePoint farm.
Different farms have different search topologies, for the best search performance, I recommend that you follow the guidance for small, medium, and large farms.
The article is about the guidance for different farms.
Search service can run with other services in the same server, if condition permits and you want to have better performance for search service and other services including BI performance, you can deploy search service in dedicated server.
If condition permits, I recommend combining a query component with a front-end Web server to avoid putting crawl components and query components on the same serve.
In your SharePoint farm, you can deploy the query components in a WFE server and the crawl components in an application server.
The articles below describe the best practices for enterprise search.
https://technet.microsoft.com/en-us/library/cc850696(v=office.14).aspx
https://technet.microsoft.com/en-us/library/cc560988(v=office.14).aspx
Best regards
Sara Fan
TechNet Community Support

Similar Messages

SAP Best Practice for Self Service Procuement

Hello All,
I am trying to find Best Practice for Self Service Procuement in the help.sap.com.
But I couldn't find them. Please help me to locate.

HI Chek these below links if usefull for you
http://www50.sap.com/businessmaps/59E32671A32A411692387571253E292A.htm
help.sap.com/.../SAP_Best_Practices_whatsnew_AU_V3600_EN.ppt
www50.sap.com/.../DADF68FA02AB4E0482021E98D8BB986F.htm
Thanks,
Batchu

Best Practice for the Service Distribution on multiple servers

Hi,
Could you please suggest as per the best practice for the above.
Requirements : we will use all features in share point ( Powerpivot, Search, Reporting Service, BCS, Excel, Workflow Manager, App Management etc)
Capacity : We have 12 Servers excluding SQL server.
Please do not just refer any URL, Suggest as per the requirements.
Thanks
srabon

How about a link to the MS guidance!
http://go.microsoft.com/fwlink/p/?LinkId=286957

Highly Required CRM 5.0 Best practices for CRM Service Module

Dear all,
I have been searching for CRM 5.0 version best practices in Internet quiete a long period, but could not find anywhere.
currently SAP is providing only best practices for SAP CRM 2007 version.
since most of configuration is differing because of Webclient Interface, I request you to refer a source from where I can get the CRM 5.0 Best Practices for Service module.
Your suggestions and help will be highly appreciated.
Best regards
Raghu ram

Hi Srini,
<removed by moderator>
Thank you & Best regards
Raghu ram
Edited by: Raghu Ram on Jul 16, 2009 6:09 AM
Edited by: Raghu Ram on Jul 16, 2009 6:11 AM
Moderator message please review the rules of engagement located here:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
Edited by: Stephen Johannes on Jul 16, 2009 8:12 AM

Best Practices for Using Service Controller for Entity Framework Database

I'm running into an issue in my first time creating a Web Service with a .NET backend with Azure. I designed a database in Entity Framework and had it create the models, but I couldn't create a controller for the table unless I made the model inherit from
EntityData. Here's the catch, the Database Model has int Id, but EntityData has string Id, so, of course, I'm getting errors. What is best practice for what I'm trying to do?
Michael DiLeo

hi Michael,
Thanks for you posting!
Sorry for I am not totally understanding your issue. Maybe two points need your confirm:
1. I confuse with the "Service controller"? IS your meaning MVC controller? Or ServiceController(http://www.codeproject.com/Articles/31688/Using-the-ServiceController-in-C-to-stop-and-start
2.whether The type of ID in the model is match to the database ? In other words, Is the type of IDin .edmx matched to the database?
By the way, it seems that this issue is more related to EF. You could post this issue on EF discussion for better support.
Thanks & Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Best Practices for JMS Service Documentation

Our software consists of a variety of JMS producers and consumers used to transform and transmit business to business messages on a large scale.
The service nodes do a variety of things, and we've had trouble over the years ensuring every queue-based service clearly identifies the parameters and payload it accepts, so that everyone from programmers to system administrators can easily see what services are available and how they are to be used.
Some have advocated always adding a web service in front of each message-based service to guarantee interface contracts are all well publicized. I think there are reasons to choose web services and reasons to choose message-based services, and am not convinced this is the right answer to address limitations in expressing the design contract for a message-based service. That said, I really like what we've been able to do with self-documenting web services based on annotations, and wonder if there's a conceptual equivalent in message-based software.
What are your best practices for ensuring your message-based services are as self-documenting as your modern web service?
Thanks in advance for your advice!
Edited by: lsamaha on Apr 16, 2012 11:46 AM

*bump

Best practice for searching on surname/lastname/name in Dutch

I'm looking for a best practice to store names of persons, but also names of companies, in my database.
I always store them as is (seems logical since you need to be able to display the original input-name) but I also want to store them transformed in some sort of way so I can easily search on them with LIKE! (Soundex, Metaphone, Q-Gram, ...)
I know SOUNDEX and DIFFERENCE are included in SQLServer, but they don't do the trick.
If somebody searches for the phrase "BAKKER", you should find names like "Backer", "Bakker", ... but also "De Backer", "Debecker", ... and this is where SOUNDEX fails ...
Does someone know some websites to visit, or someone already wrote a good function to transform a string that I can use to store the names but also to transform my search data?
(Example: (Pseudo lang :-))
function MakeSearchable (sString)
sString = sString.Replace(" ", ""); //Remove spaces
sString = sString.Replace("CK", "K");
sString = sString.Replace("KK", "K");
sString = sString.Replace("C", "S");
sString = sString.Replace("SS", "S");
return sString;
Greetz,
Tim

Thanks for the response, but unfortunately the provided links are not much help:
- The first link is about an article I don't have access to (i'm not a registered user)
- The second link is about Integration Services. This is nice for Integration stuff, but I need to have a functionality within a frontend.
- The third link is for use in Excel.
Maybe I'm looking for the wrong thing when wanting to create an extra column with "cleaned" up data. Maybe there's another solution from within my frontend or business layer, but I simply want a textbox on a form where users can type a search-value like
"BAKKER". The result of the search should return names like "DEBACKER", "DE BEKKER", "BACKER", "BAKRE", ...
I used to work in a hospital where they wrote their own SQL-function (on an Interbase database) to do this: They had a column with the original name, and a column with a converted name:
=> DEBACKER => Converted = DEBAKKER
=> DE BEKKER => Converted = DEBEKKER
=> BACKER => Converted = BAKKER
=> BAKRE => Converted = BAKKER
When you searched for "BAKKER", you did a LIKE operation on the converted column ...
What I am looking for is a good function to convert my data as above.
Greetz,
Tim

Best Practice for Searching HTML Source

Hello
What is the best way to search the content of html files?
These would be files I create.
I have tried to use SpotLight but it's not up to it.
The best thing I have found thus far is Multi-File Search in BBEdit.
There I find my annotations under '/* NOTES:'
Thanks

Thanks for the response, but unfortunately the provided links are not much help:
- The first link is about an article I don't have access to (i'm not a registered user)
- The second link is about Integration Services. This is nice for Integration stuff, but I need to have a functionality within a frontend.
- The third link is for use in Excel.
Maybe I'm looking for the wrong thing when wanting to create an extra column with "cleaned" up data. Maybe there's another solution from within my frontend or business layer, but I simply want a textbox on a form where users can type a search-value like
"BAKKER". The result of the search should return names like "DEBACKER", "DE BEKKER", "BACKER", "BAKRE", ...
I used to work in a hospital where they wrote their own SQL-function (on an Interbase database) to do this: They had a column with the original name, and a column with a converted name:
=> DEBACKER => Converted = DEBAKKER
=> DE BEKKER => Converted = DEBEKKER
=> BACKER => Converted = BAKKER
=> BAKRE => Converted = BAKKER
When you searched for "BAKKER", you did a LIKE operation on the converted column ...
What I am looking for is a good function to convert my data as above.
Greetz,
Tim

Current best practice for Time service settings for Hyper-V 2012 R2 Host and guest OS's

I am trying to find out what the current best practice is for Time service settings in a Hyper-V 2012 environment. I find conflicting information. Can anyone point me in the right direction. I have found some different sources (links below) but again the
are not consistent. Thanks
http://blogs.msdn.com/b/virtual_pc_guy/archive/2010/11/19/time-synchronization-in-hyper-v.aspx
http://technet.microsoft.com/en-us/library/virtual_active_directory_domain_controller_virtualization_hyperv(v=ws.10).aspx
http://social.technet.microsoft.com/wiki/contents/articles/12709.time-services-for-a-domain-controller-on-hyper-v.aspx

From the first link provided by Brian, it does state that the time service should be off, but then the update changes that statement. Still best to rely on the first link in the OP - it was written by the guy that has been responsible for much of what
gets coded into Hyper-V, starting from before there ever was a Hyper-V. I'd say that's a pretty reliable source.
Time service
For virtual machines that are configured as domain controllers, it is recommended that you disable time synchronization between the host system and guest operating system acting as a domain controller. This enables your guest domain controller to synchronize
time from the domain hierarchy.
To disable the Hyper-V time synchronization provider, shut down the VM and clear the Time synchronization check box under Integration Services.
Note
This guidance has been recently updated to reflect the current recommendation to synchronize time for the guest domain controller from only the domain hierarchy, rather than the previous recommendation to partially disable time synchronization between the
host system and guest domain controller.
. : | : . : | : . tim

Best practice for web service call

I can add a web service using the standard data connection wizard - works fine. I also can do it all in Javascript which give me a bit more flexibility. Is there some guideline or wisdom for which is best?

It all depends on your requirement..
For example, if you know your webservice address at design time itself, then it would be better to put in the data connection tab.
But if your webservice address changes at run time based on the environment your application is deployed in, then you can use the java script code to change the webservice address dynamically.
Thanks
Srini

Best practice for implementing services

I am doing some testing with implementing webservices and i am wondering what it the best way...
First some background about the project. The idea is that the user interfaces uses webservices for almost everything. The complete datalayer is created somewhere else and i just use those services. For example i have a WSDL that holds the UserServices. It describes the service for creating,updating,deleting, getUserByCompany, getUserByKey and some other stuff.
As far as i can see, i have 2 options in JDev
1) Create a datacontrol based upon the WSDL. This way i can easily drag&drop the services and use the databindings.
I'm afraid that this approach is not that flexibel. It isn't realy easy to update the DC once the WSDL has been changed.
I have a popup to edit/create a user. It also does not seem easy to implement this because when i open the popup for create, my input fields should be bound to the parameters for the createService but when i open the popup to edit a user, those fields should be bound to the editService instead. This does not look easy...
Also, the table that lists the users depends on the role of the user. When an admin request the page with the user table, he must see all the users but when another user request the page, he can only see the users from his company so we have 2 services for this: getUsers (gets all the users) and getUsersByCompany so here also, my table can be bound to 2 services... Does not seem to be easy to implement.
2) The second way of implementing services is using a proxy. This seems way more flexible. I just creates a java interface to call the service. This way i can create my own pojo's and create a DC from that.
This way i can create a function getUsers(String company). When i drop that to my page, i can bind the company parameter to a backing bean. THis way i can write some logic in the pojo based upon the value. If company is null i return the result of the getUser service, else i use the getUsersByCompany service instead.
It's also very easy to regenerate the proxy if the wsdl has been changed. Somethign that isn't possible with the first way.
What do you do when you use webservices this way? If their any difference in performance?
Any other tips.

You got it basically right.
With the proxy approach you write get code that wraps your calls to the Web service - and this allows you to do various modifications on how the service is called, what to do with the results etc.
However check out this example to see how you can use the same result set in a Web service data control for both a query and an update/insert:
http://blogs.oracle.com/shay/2010/05/updateinsert_with_adf_web_serv.html

Best practices for deploying forms in a 'cluster'?

Anyone know of any public docs that discuss typical best practices for
- forms deployment;
- forms apps management and version control; and/or
- deploying (and keeping) the .frm/frx in sync when using multiple forms servers in a HA or load balancing envrionment?

Hi adil,
Based on your description, you want to know the best practices for search service in a SharePoint farm.
Different farms have different search topologies, for the best search performance, I recommend that you follow the guidance for small, medium, and large farms.
The article is about the guidance for different farms.
Search service can run with other services in the same server, if condition permits and you want to have better performance for search service and other services including BI performance, you can deploy search service in dedicated server.
If condition permits, I recommend combining a query component with a front-end Web server to avoid putting crawl components and query components on the same serve.
In your SharePoint farm, you can deploy the query components in a WFE server and the crawl components in an application server.
The articles below describe the best practices for enterprise search.
https://technet.microsoft.com/en-us/library/cc850696(v=office.14).aspx
https://technet.microsoft.com/en-us/library/cc560988(v=office.14).aspx
Best regards
Sara Fan
TechNet Community Support

Best Practices for Service Entry Sheet Approval

Hi All
Just like to get some opinion on best practices for external service management - particularly approval process for Service Entry Sheet.
We have a 2 step approval process using workflow:
1 Entry Sheet Created (blocked)
2. Workflow to requisition creator to verify/unblock the Entry Sheet
3. Workflow to Cost Object owner to approve the Entry Sheet.
For high volume users (e.g. capital projects) this is cumbersome process - we looking to streamline but still maintain control.
What do other leaders do in this area? To me mass release seems to lack control, but perhaps by using a good release strategy we could provide a middle ground?
Any ideas or experiences would be greatly appreciated.
thanks
AC.

Hi,
You can have purchasing group (OME4) as department and link cost center to department (KS02). Use user exit for service entry sheet release and can have two characteristics for service entry sheet release, one is for value (CESSR- LWERT) and another one for department (CESSR-USRC1) .Have one release class for service entry sheet release & then add value characteristics (CESSR- LWERT) and department characteristics (CESSR-USRC1). Now you can design release strategies for service entry sheet based on department & value, so that SES will created and then will be released by users with release code based on department & value assigned to him/her.
Regards,
Biju K

BEST PRACTICE FOR AN EFFICIENT SEARCH FACILITY

Good Morning,
Whilst in Training, our Trainer said that the most efficiency from the Sharpoint Search would be to install the Search Facility on a separate server (hardware).
Not sure how to have this process done.
Your advice and recommendation would be greatly appreciated.
thanks a mil.
NRH

Hi,
You can
create a dedicated search server that hosts all search components, query and index role, and crawl all on one physical server.
Here are some article for your reference:
Best practices for search in SharePoint Server 2010:
http://technet.microsoft.com/en-us//library/cc850696(v=office.14).aspx
Estimate performance and capacity requirements for SharePoint Server 2010 Search:
http://technet.microsoft.com/en-us/library/gg750251(v=office.14).aspx
Below is a similar post for your reference:
http://social.technet.microsoft.com/Forums/en-US/be5fcccd-d4a3-449e-a945-542d6d917517/setting-up-dedicated-search-and-crawl-servers?forum=sharepointgeneralprevious
Best regards
Wendy Li
TechNet Community Support

What are the best practices for audit report for SharePoint 2013 farm ?

Hello,
I am looking for the best practices for audit reporting in SharePoint 2013 farm.Can anyone please provide me checklist/tools/guidelines on same ?
your help will be much appreciated.
Thanks and Regards,
Dipti Chhatrapati

This is quite open ended question. A sharepoint farm should be well maintained as per :
1. Microsoft's recommendations on : Topology, Hardware and Software requirements, Operational procedures and most important Capacity guidelines:
http://technet.microsoft.com/en-us/library/ff758645(v=office.15).aspx
http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx
2. Organisation's IT policies and procedures : Farm Configuration, Workload and monitoring
http://technet.microsoft.com/en-us/library/ff758658(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ee748651(v=office.15).aspx
3. Industry best practices
I would suggest to start thinking over these lines and create a plan for your Sharepoint farm.
You can then create powershell scripts to run these reports at certain frequency to find the changes, any deviation from the standard and health of the entire farm.
Hope this helps!!
I LOVE MS..... Thanks and Regards, Kshitiz (Posting is provided "AS IS" with no warranties, and confers no rights.)

Best practices for search service in a sharepont farm

Similar Messages

Maybe you are looking for