Best practices for using Query Browser

Hi,
I started getting along with "Query Browser" option to embed data directly from Bex queries to the dashboard.
I am looking for the Best practices which are recommended and needs to be followed from performance point of view and from reporting point of view.
I went through some of documents but was not convincingly sure about the measures which they suggested.
So, would be thankful for any help points or documents received in relation with it.
Regards,
Jaywant Kulkarni.

Hi JK,
All above links are given general rules and tips & tricks to boost your dashboard performance.
Keep the dashboard simple and clean, dashboards are for summarized level not to the detailed level.
try to understand the KPI for the client based on the write your model in paper first and go through the dashboards.
Maximum of number of rows allowed by the dashboard is 512, you can increase the rows but that too hampers your dashboard, if the result set of the query is too big.
Connections i have seen people using more than 10 - 15 connections into the dashboards, but these many connections. really your dashboard will take time to retrieve the data.
Things you need to consider:
- Reduce the components in your DD.
- Make the font name similar across the dashboard.
- Enable the option show loading status in document properties, this will increase your loading time.
- Use refresh type as "Refresh after components loaded".
- Use simple formula as if-else & sum,indexes.
- Remove formatting in your query's.
These are the few things you can consider while designing the dashboard. Do search in scn and blog there lot many tips and tricks are available.
Regards,
Suman

Similar Messages

Best practice for use of spatial operators

Hi All,
I'm trying to build a .NET toolkit to interact with Oracles spatial operators. The most common use of this toolkit will be to find results which are within a given geometry - for example select parish boundaries within a county.
Our boundary data is high detail, commonly containing upwards of 50'000 vertices for a county sized polygon.
I've currently been experimenting with queries such as:
select
from
uk_ward a,
uk_county b
where
UPPER(b.name) = 'DORSET COUNTY' and
sdo_relate(a.geoloc, b.geoloc, 'mask=coveredby+inside') = 'TRUE';
However the speed is unacceptable, especially as most of the implementations of the toolkit will be web based. The query above takes around a minute to return.
Any comments or thoughts on the best practice for use of Oracle spatial in this way will be warmly welcomed. I'm looking for a solution which is as quick and efficient as possible.

Thanks again for the reply... the query currently takes just under 90 seconds to return. Here are the results from the execution plan ran in sql*:
Elapsed: 00:01:24.81
Execution Plan
Plan hash value: 598052089
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 156 | 46956 | 76 (0)| 00:00:01 |
| 1 | NESTED LOOPS | | 156 | 46956 | 76 (0)| 00:00:01 |
|* 2 | TABLE ACCESS FULL | UK_COUNTY | 2 | 262 | 5 (0)| 00:00:01 |
| 3 | TABLE ACCESS BY INDEX ROWID| UK_WARD | 75 | 12750 | 76 (0)| 00:00:01 |
|* 4 | DOMAIN INDEX | UK_WARD_SX | | | | |
Predicate Information (identified by operation id):
2 - filter(UPPER("B"."NAME")='DORSET COUNTY')
4 - access("MDSYS"."SDO_INT2_RELATE"("A"."GEOLOC","B"."GEOLOC",'mask=coveredby+i
nside')='TRUE')
Statistics
20431 recursive calls
60 db block gets
22432 consistent gets
1156 physical reads
0 redo size
2998369 bytes sent via SQL*Net to client
1158 bytes received via SQL*Net from client
17 SQL*Net roundtrips to/from client
452 sorts (memory)
0 sorts (disk)
125 rows processed
The wards table has 7545 rows, the county table has 207.
We are currently on release 10.2.0.3.
All i want to do with this is generate results which fall in a particular geometry. Most of my testing has been successful i just seem to run into issues when querying against a county sized polygon - i guess due to the amount of vertices.
Also looking through the forums now for tuning topics...

What is the best practice for using the Calendar control with the Dispatcher?

It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security. However, the Calendar relies on this endpoint to build the events for the calendar. On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works. We've noticed the same behavior on the Geometrixx site.
What is the best practice for using the Calendar control with Dispatcher?
Thanks in advance.
Scott

Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
Example: http://www.cariboowoodshop.com/wood-shop.html

What are the best practices for using the enhancement framework?

Hello enhancement framework experts,
Recently, my company upgraded to SAP NW 7.1 EhP6. This presents us with the capability to use the enhancement framework.
A couple of senior programmers were asked to deliver a guideline for use of the framework. They published the following statement:
"SAP does not guarantee the validity of the enhancement points in future releases/versions. As a result, any implemented enhancement points may require significant work during upgrades. So, enhancement points should essentially be used as an alternative to core modifications, which is a rare scenario.".
I am looking for confirmation or contradiction to the statement "SAP does not guarantee the validity of enhancement points in future releases/versions..." . Is this a true statement for both implicit and explicit enhancement points?
Is the impact of activated explicit and implicit enhancements much greater to an SAP upgrade than BAdi's and user exits?
Is there any SAP published guidelines/best practices for use of the enhancement framework?
Thank you,
Kimberly
Edited by: Kimberly Carmack on Aug 11, 2011 5:31 PM

Found an article that answers this question quite well:
[How to Get the Most From the Enhancement and Switch Framework as a Customer or Partner - Tips from the Experts|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0f0373e-a915-2e10-6e88-d4de0c725ab3]
Thank you Thomas Weiss!

Best practice for using messaging in medium to large cluster

What is the best practice for using messaging in medium to large cluster In a system where all the clients need to receive all the messages and some of the messages can be really big (a few megabytes and maybe more)
I will be glad to hear any suggestion or to learn from others experience.
Shimi

publish/subscribe, right?
lots of subscribers, big messages == lots of network traffic.
it's a wide open question, no?
%

Best Practice for using multiple models

Hi Buddies,
     Can u tell me the best practices for using multiple models in single WD application?
    Means --> I am using 3 RFCs on single application for my function. Each time i am importing that RFC model under
    WD --->Models and i did model binding seperately to Component Controller. Is this is the right way to impliment multiple            models in single application ?

It very much depends on your design, but One RFC per model is definitely a no no.
Refer to this document to understand how should you use the model in most efficient way.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/705f2b2e-e77d-2b10-de8a-95f37f4c7022?quicklink=events&overridelayout=true
Thanks
Prashant

Best Practice for Using Static Data in PDPs or Project Plan

Hi There,
I want to make custom reports using PDPs & Project Plan data.
What is the Best Practice for using "Static/Random Data" (which is not available in MS Project 2013 columns) in PDPs & MS Project 2013?
Should I add that data in Custom Field (in MS Project 2013) or make PDPs?
Thanks,
EPM Consultant
Noman Sohail

Hi Dale,
I have a Project Level custom field "Supervisor Name" that is used for Project Information.
For the purpose of viewing that "Project Level custom field Data" in
Project views , I have made Task Level custom field
"SupName" and used Formula:
[SupName] = [Supervisor Name]
That shows Supervisor Name in Schedule.aspx
============
Question: I want that Project Level custom field "Supervisor Name" in
My Work views (Tasks.aspx).
The field is enabled in Task.aspx BUT Data is not present / blank column.
How can I get the data in "My Work views" ?
Noman Sohail

Best practices for using the knowledge directory

Anyone know when it is best to store docs in the Knowledge Directory versus Collab? They are both searchable, but I guess you can publish from the Publisher to the KD. Anyone have any best practices for using the KD or setting up taxonomies in the KD?

Hi Richard,
If you need to configure dynamic pricing that may vary by tenant and/or if you want to set up cost drivers that are service item attributes, you should configure Billing Tables in the Demand Management module in 10.0.
The cost detail functionality in 9.4 will likely be changed to merged with the new pricing feature in 10.0. The current plan is not to bring cost detail into the Service Catalog module.

Best practices for using the 'cost details' fields

Hi
Please could you advise us to the best practices for using the 'cost details' field within Pricing. Currently I cannot find the way to surface the individual Cost Details fields within the Next Generation UI, even with the tick box for 'display both cost and price' ticked. It seems that these get surfaced when the Next Generation UI is turned off, but cannot find them when it is turned on. We can see the 'Pricing Summary' field but this does not fulfill our needs, as some of our services have both recurring and one-off costs.
Attached are some screenshots to further explain the situation.
Many thanks,
Richard Thornton

Hi Richard,
If you need to configure dynamic pricing that may vary by tenant and/or if you want to set up cost drivers that are service item attributes, you should configure Billing Tables in the Demand Management module in 10.0.
The cost detail functionality in 9.4 will likely be changed to merged with the new pricing feature in 10.0. The current plan is not to bring cost detail into the Service Catalog module.

JSF - Best Practice For Using Managed Bean

I want to discuss what is the best practice for managed bean usage, especially using session scope or request scope to build database driven pages
---- Session Bean ----
- In the book Core Java Server Faces, the author mentioned that most of the cases session bean should be used, unless the processing is passed on to other handler. Since JSF can store the state on client side, i think storing everything in session is not a big memory concern. (can some expert confirm this is true?) Session objects are easy to manage and states can be shared across the pages. It can make programming easy.
In the case of a page binded to a resultset, the bean usually helds a java.util.List object for the result, which is intialized in the constructor by query the database first. However, this approach has a problem: when user navigates to other page and comes back, the data is not refreshed. You can of course solve the problem by issuing query everytime in your getXXX method. But you need to be very careful that you don't bind this XXX property too many times. In the case of querying in getXXX, setXXX is also tricky as you don't have a member to set. You usually don't want to persist the resultset changes in the setXXX as the changes may not be final, in stead, you want to handle in the actionlistener (like a save(actionevent)).
I would glad to see your thought on this.
--- Request Bean ---
request bean is initialized everytime a reuqest is made. It sometimes drove me nuts because JSF seems not to be every consistent in updating model values. Suppose you have a page showing parent-children a list of records from database, and you also allow user to change directly on the children. if I hbind the parent to a bean called #{Parent} and you bind the children to ADF table (value="#{Parent.children}" var="rowValue". If I set Parent as a request scope, the setChildren method is never called when I submit the form. Not sure if this is just for ADF or it is JSF problem. But if you change the bean to session scope, everything works fine.
I believe JSF doesn't update the bindings for all component attributes. It only update the input component value binding. Some one please verify this is true.
In many cases, i found request bean is very hard to work with if there are lots of updates. (I have lots of trouble with update the binding value for rendered attributes).
However, request bean is working fine for read only pages and simple binded forms. It definitely frees up memory quicker than session bean.
----- any comments or opinions are welcome!!! ------

I think it should be either Option 2 or Option 3.
Option 2 would be necessary if the bean data depends on some request parameters.
(Example: Getting customer bean for a particular customer id)
Otherwise Option 3 seems the reasonable approach.
But, I am also pondering on this issue. The above are just my initial thoughts.

Best Practices for Using Photoshop (and Computing in General)

I've been seeing some threads that lead me to realize that not everyone knows the best practices for doing Photoshop on a computer, and in doing conscientious computing in general. I thought it might be a good idea for those of us with some exprience to contribute and discuss best practices for making the Photoshop and computing experience more reliable and enjoyable.
It'd be great if everyone would contribute their ideas, and especially their personal experience.
Here are some of my thoughts on data integrity (this shouldn't be the only subject of this thread):
Consider paying more for good hardware. Computers have almost become commodities, and price shopping abounds, but there are some areas where spending a few dollars more can be beneficial. For example, the difference in price between a top-of-the-line high performance enterprise class hard drive and the cheapest model around with, say, a 1 TB capacity is less than a hundred bucks! Disk drives do fail! They're not all created equal. What would it cost you in aggravation and time to lose your data? Imagine it happening at the worst possible time, because that's exactly when failures occur.
Use an Uninterruptable Power Supply (UPS). Unexpected power outages are TERRIBLE for both computer software and hardware. Lost files and burned out hardware are a possibility. A UPS that will power the computer and monitor can be found at the local high tech store and doesn't cost much. The modern ones will even communicate with the computer via USB to perform an orderly shutdown if the power failure goes on too long for the batteries to keep going. Again, how much is it worth to you to have a computer outage and loss of data?
Work locally, copy files elsewhere. Photoshop likes to be run on files on the local hard drive(s). If you are working in an environment where you have networking, rather than opening a file right off the network, then saving it back there, consider copying the file to your local hard drive then working on it there. This way an unexpected network outage or error won't cause you to lose work.
Never save over your original files. You may have a library of original images you have captured with your camera or created. Sometimes these are in formats that can be re-saved. If you're going to work on one of those files (e.g., to prepare it for some use, such as printing), and it's a file type that can be overwritten (e.g., JPEG), as soon as you open the file save the document in another location, e.g., in Photoshop .psd format.
Save your master files in several places. While you are working in Photoshop, especially if you've done a lot of work on one document, remember to save your work regularly, and you may want to save it in several different places (or copy the file after you have saved it to a backup folder, or save it in a version management system). Things can go wrong and it's nice to be able to go back to a prior saved version without losing too much work.
Make Backups. Back up your computer files, including your Photoshop work, ideally to external media. Windows now ships with a quite good backup system, and external USB drives with surprisingly high capacity (e.g., Western Digital MyBook) are very inexpensive. The external drives aren't that fast, but a backup you've set up to run late at night can finish by morning, and if/when you have a failure or loss of data. And if you're really concerned with backup integrity, you can unplug an external drive and take it to another location.
This stuff is kind of "motherhood and apple pie" but it's worth getting the word out I think.
Your ideas?
-Noel

APC Back-UPS XS 1300. $169.99 at Best Buy.
Our power outages here are usually only a few seconds; this should give my server about 20 or 25 minutes run-time.
I'm setting up the PowerChute software now to shut down the computer when 5 minutes of power is left. The load with the monitor sleeping is 171 watts.
This has surge protection and other nice features as well.
-Noel

Best Practice for Use of ABAP in Customizing SRM and/or CRM

I was wondering if there is a document that defines best practices for the use of ABAP with the installation and customization of SRM and/or CRM. Such as amount of ABAP coding typically required, and best practices around the use of ABAP for customization and configuration.
Thanks.

Hi, Johnson
Sorry, Please don't mind, you are not at right place to ask the Question like this
Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Thanks and Regards,
Faisal

Best practice for using common VIs

Hi,
I have some projects, which use some common VIs (like open/close file format and similar). What is the best practice to use these common VIs? Now I copy these to the project folders, but now I have multiple copies of some VIs, which is difficult to maintian, if I need to modify something in these common files.
What sould i use? Still copy, or link the common folder to my project, or use a packed project, or something else?
Thanks

dont know if it is the best practice but with every new project, I create a new folder in my project (right click on my computer -> new -> virtual folder) and link that virtual folder to my folder that contains all my common code (vi/ctl/class) by right clicking on the newly created virtual folder and choosing "Convert to auto-populating folder".
One downside is that if you modify one of those vis for your new application, it might break it for one of your older projects.
I also use source code control (svn / git / mercurial / etc..) so if that happens, I can always go back to a previous working version.

Best Practice for BEX Query "PUBLISH to ROLE"?

Hello.
We are trying to determine the best practice for publishing BEX queries/views/workbooks to ROLEs.
To be clear of the process I am referring: from the BEX Query Designer, there is an option QUERY>PUBLISH>TO ROLE. This function updates the user menu of the selected security role with essentially a shortcut to the BEX query. It is also possible to save VIEWS/WORKBOOKS to a role from the BEX Analyzer menu. We have found ROLE menus to be a good way to organize BEX queries/views/workbooks for our users.
Our dilemma is whether to publish to the role in our DEV system and transport to PROD,... or if it is ok to publish to the role directly in the PROD system.
Publishing in DEV is not always possible, as we have objects in PROD that do not exist in DEV. For example, we allow power users to create queries directly in PROD. We also allow VIEWS and WORKBOOKS to be created directly in PROD. It would not be possible to publish types of objects in DEV.
Publishing in PROD eliminates the issues above, but causes concerns for our SECURITY team. We would be able to maintain these special roles directly in PROD.
Would appreciate any ideas, suggestions, examples of how others are handling this BEX publish-to-role process.
Thank you.
-Joel

Hi Joel,
Again as per the Best Practices.Nothing to be created in PRD,even if we create them in PRD for Power users its assumed as temprory and can be deleted at any time.
So if there are already deviations then you can go for deviations in this case as well but it wont be the Best Practice.Also in few cases we have workbooks created in PRD as they cud nt be created in DEV due to various reasons...in such cases we did not think of Best Practice ,we had a raised an OSS on this aswell.
In our Project,we have done everything in DEV and transported to PRD,in case there were any very Minor changes at query level we have done in PRD and immedialtely replicated the same in DEV so that they are in SYNC.
rgds
SVU

Best Practices for Using Service Controller for Entity Framework Database

I'm running into an issue in my first time creating a Web Service with a .NET backend with Azure. I designed a database in Entity Framework and had it create the models, but I couldn't create a controller for the table unless I made the model inherit from
EntityData. Here's the catch, the Database Model has int Id, but EntityData has string Id, so, of course, I'm getting errors. What is best practice for what I'm trying to do?
Michael DiLeo

hi Michael,
Thanks for you posting!
Sorry for I am not totally understanding your issue. Maybe two points need your confirm:
1. I confuse with the "Service controller"? IS your meaning MVC controller? Or ServiceController(http://www.codeproject.com/Articles/31688/Using-the-ServiceController-in-C-to-stop-and-start
2.whether The type of ID in the model is match to the database ? In other words, Is the type of IDin .edmx matched to the database?
By the way, it seems that this issue is more related to EF. You could post this issue on EF discussion for better support.
Thanks & Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Best practices for using Query Browser

Similar Messages

Maybe you are looking for