Best Practices in use of ABAP for SRM and/or CRM Configuration

I was wondering if there is a document that defines best practices for the use of ABAP with the installation and customization of SRM and/or CRM. Such as amount of ABAP coding typically required, and best practices around the use of ABAP for customization and configuration.
Thanks.

Hi, Johnson
Sorry, Please don't mind, you are not at right place to ask the Question like this
Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Thanks and Regards,
Faisal

Similar Messages

Best practice to use Time capsule for back-up of 3 different products (MBP 15 OSX lion, MBP 13 OSX lion and MBA 13 OSX mountain lion)?. Only the MBP15 is back-up regularly.

When I want to save data of the MBA13 on mountain lion (wireless) with time capsule, hois there any best practice to perform?
After that, assuming that data are back-up, can we easily differentiate data in time capsule belonging to MBP15/13 and MBA13?

Unfortunately, Apple left off the Ethernet port....the most important port in networking....on the MBA, so your first backup of the entire Mac will need to be done using wireless.
That may take a day or two unless your MBA has a Thunderbolt port on it in which case you could add a Thunderbolt to Ethernet adapter and connect the MBA to the Time Capsule for the first backup using an Ethernet cable. It will probably only take 3-4 hours or less doing it this way.
Once you have the first complete backup done, other subsequent backups can be done using wireless since they will ony take a few minutes, on average.
Both Macs will backup to the Time Capsule using Time Machine automatically. Backups will be kept completely separate, so one Mac will normally only be able to "see" its own backups.

Best practice in using Macs in Windows environment and Keychain

Keychain is giving us a major headache as it keeps hold of prior windows network passwords.
Looking for any advice on how to control/configure Keychain for macintosh computers in a windows environment.
Thanks
JTS

1.) have you tried rebuilding the users keychains?
2.) Do you have the proper certificates installed?
Ive never had troubel with the keychain, but my passowrd doesnt have manditory resetting set up so this may be why I havent experienced this issue.

Best Practice for Use of ABAP in Customizing SRM and/or CRM

I was wondering if there is a document that defines best practices for the use of ABAP with the installation and customization of SRM and/or CRM. Such as amount of ABAP coding typically required, and best practices around the use of ABAP for customization and configuration.
Thanks.

Hi, Johnson
Sorry, Please don't mind, you are not at right place to ask the Question like this
Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Thanks and Regards,
Faisal

Best Practice: Usage of the ABAP Packages Concept?

Hi SDN folks,
I've just started on a new project - I have significant ABAP development experience (15 years+) - but one thing that I have never seen used correctly is the Package concept in ABAP - for any of the projects that I have worked on.
I would like to define some best practices - about when we should create packages - and about how they should be structured.
My understanding of the package concept is that they allow you to bundle all of the related objects of a piece of development work together. In previous projects - and almost every project I have ever worked on - we just have packages ZBASIS, ZMM, ZSD, ZFI and so on. But this to me is a very crude usage of packages, and really it seems that we have not moved on passed the 4.6 usage of the old development class concept - and it means that packages do not really add much value.
I read in the SAP PRESS Next Generation ABAP book (Thomas Ljung, Rich Hellman) (I only have the 1st edition) - that we should use packages for defining separation of concern for an application. So it seems there they are recommending that for each and every application we write - we define at the least 3 packages - one for Model, one for Controller and one for view based objects. It occurs to me that following this approach will lead to a tremendous number of packages over the life cycle of an implementation, which could potentially lead to confusion - and so also add little value. Is this really the best practice approach? Has anyone tried this approach across a full blown implementation?
As we are starting a new implementation - we will be running with 7 EHP2 and I would really like to get the most out of the functionality that is provided. I wonder what others have for experience in the definition of packages.
One possible usage occurs to me that you could define the packages as a mirror image of the application business object class hierarchy (see below). But perhaps this is overcomplicating their usage - and would lead to issues later in terms of transportation conflicts etc.:
                                      ZSD
                                        |
                ZSOrder    ZDelivery   ZBillingDoc
Does anyone have any good recommendations for the usage of the ABAP Package concept - from real life project experience?
All contributions are most welcome - although please refrain from sending links on how to create packages in SE80
Kind Regards,
Julian

Hi Julian,
I have struggled with the same questions you are addressing. On a previous project we tried to model based on packages, but during the course of the project we encountered some problems that grew overtime. The main problems were:
1. It is hard to enforce rules on package assignments
2. With multiple developers on the project and limited time we didn't have time to review package assignment
3. Devopelers would click away warnings that an object was already part of another project and just continue
4. After go-live the maintenance partner didn't care.
So, my experience is is that it is a nice feature, but only from a high level design point of view. In real life it will get messy and above all, it doesn't add much value to the development. On my neew assignment we are just working with packages based on functional area and that works just fine.
Roy

What are the best practices to migrate VPN users for Inter forest mgration?

What are the best practices to migrate VPN users for Inter forest mgration?

It depends on a various factors. There is no "generic" solution or best practice recommendation. Which migration tool are you planning to use?
Quest (QMM) has a VPN migration solution/tool.
ADMT - you can develop your own service based solution if required. I believe it was mentioned in my blog post.
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

Best practice to use MediaPlayer?

Is the best practice to use attributes of MediaPlayer (such as playing) or to request the PlayTrait and read its playState attribute?
(This question comes from a customer. Reposting here for the OSMF team to respond and for the benefit of the whole group.)
Sumner Paine
osmf product manager

For playback use cases, I'd recommend you stick with MediaPlayer, as it's simpler to use and manages all of the trait event registration.

Best practice when using Tangosol with an app server

Hi,
I'm wondering what is the best practice when using Tangosol with an app server (Websphere 6.1 in this case). I've been able to set it up using the resource adapter, tried using distributed transactions and it appears to work as expected - I've also been able to see cache data from another app server instance.
However, it appears that cache data vanishes after a while. I've not yet been able to put my finger on when, but garbage collection is a possibility I've come to suspect.
Data in the cache survives the removal of the EJB, but somewhere later down the line it appear to vanish. I'm not aware of any expiry settings for the cache that would explain this (to the best of my understanding the default is "no expiry"), so GC came to mind. Would this be the explanation?
If that would be the explanation, what would be a better way to keep the cache from being subject to GC - to have a "startup class" in the app server that holds on to the cache object, or would there be other ways? Currently the EJB calls getCacheAdapter, so I guess Bad Things may happen when the EJB is removed...
Best regards,
/Per

Hi Gene,
I found the configuration file embedded in coherence.jar. Am I supposed to replace it and re-package coherence.jar?
If I put it elsewhere (in the "classpath") - is there a way I can be sure that it has been found by Coherence (like a message in the standard output stream)? My experience with Websphere is that "classpath" is a rather ...vague concept, we use the J2CA adapter which most probably has a different class loader than the EAR that contains the EJB, and I would rather avoid to do a lot of trial/error corrections to a file just to find that it's not actually been used.
Anyway, at this stage my tests are still focused on distributed transactions/2PC/commit/rollback/recovery, and we're nowhere near 10,000 objects. As a matter of fact, we haven't had more than 1024 objects in these app servers. In the typical scenario where I've seen objects "fade away", there has been only one or two objects in the test data. And they both disappear...
Still confused,
/Per

Best Practice regarding using and implementing the pref.txt file

Hi All,
I would like to start a post regarding what is Best Practice in using and implementing the pref.txt file. We have reached a stage where we are about to go live with Discoverer Viewer, and I am interested to know what others have encountered or done to with their pref.txt file and viewer look and feel..
Have any of you been able to add additional lines into the file, please share ;-)
Look forward to your replies.
Lance

Hi Lance
Wow, what a question and the simple answer is - it depends. It depends on whether you want to do the query predictor, whether you want to increase the timeouts for users and lists of values, whether you want to have the Plus available items and Selected items panes displayed by default, and so on.
Typically, most organizations go with the defaults with the exception that you might want to consider turning off the query predictor. That predictor is usually a pain in the neck and most companies turn it off, thus increasing query performance.
Do you have a copy of my Discoverer 10g Handbook? If so, take a look at pages 785 to 799 where I discuss in detail all of the preferences and their impact.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Best Practice of using ERM (Role Expert) in Landscape

Hello,
Can anyone tell me what is the best practice (choice) of using ERM in the SAP landscape?
1. Creating a role in DEV system using ERM and using SAP standard transport process to transport role to QAS and PRD systems.
OR
2. Creating a role in all systems in ladscape (DEV, QAS and PRD).
Please share if you have any best practice implementation scenarios.
Appreciate for the help.
Thanks
Harry.

Harry,
The best practice is to follow Option 1. You should never directly create a role in Prod system. This is what SAP recommends as well.
Alpesh

Best practice to use PXE on 802.1X network ?

Hello,
We use Cisco ISE 1.2.0.899 on our network (we plan to upgrade to 1.3 in some months).
Our network includes Cisco models 2960S (and some 2960T) about wired and 2602I (with WISM2) about wireless.
We have to allow PXE boot on one (or many) VLAN.
Do you know what's the best practice to use PXE on a 802.1X network ?
Does ISE and/or Switch can recognize PXE request?
Do we have to use settings/rules into ISE or on Switch?
Does the easy way is to allow PXE on WebAuth VLAN?
Regards,
Chris

I am in a similar position.
We would prefer to keep all switch ports common, even those used for imaging from scratch.
For PXE as far as I can see we need to allow the port to quickly fail 802.1X and MAB to a remediation VLAN.
Using ISE we can apply an ACL that allows PXE bootp and dhcp requests and responses along with any other traffic we want in that network i.e. access to internet proxy server, anti-virus updates for posturing etc.
I haven't configured this yet so I'm not sure of what issues we'll face with timing. We currently use an auth pattern of 802.1X first, then MAB, then fail open to the static VLAN. With ISE 1.3 this is the supposed suggested method instead of a hard "closed" mode.
switchport access vlan XX
switchport mode access
network-policy VV
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan XX
authentication event server dead action authorize voice
authentication host-mode multi-domain
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10

Best practice to use Tortoise SVN with LV

Can anyone recommend what is the best practice to use and structure the project using TSVN with LV? I have seen the jki tool and have also read about some issues of linkage when using TSVN with LV as posted on the forum here. I suppose these linkage issues still exists? Other than perforce is there any suggestion on source control that integrates well with LV?
TIA
CLD,CTD

We use Tortoise SVN with LV and it works very good. It's not integrated in that i cannot from within LV check in and out stuff, i have to do that in the Explorer. That's not a problem to me.
SVN is a very good source and version control regardless.
One small issue with external handling is if you want to change an already used and active filename. In LV you can save to another filename and references will update, but ofcourse SVN doesn't pick up on that automagically. There are two solutions to this:
1. When you check in, you'll get 1 added and 1 deleted file, select both, r-click and "Repair move".
2. After changing the filename in LV, change it back in explorer and r-click the file for a SVN rename and rename it to the new name.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Best practices to use stored procedure

Just wondering about best practices of using Stored procedures in TOPLink with respect to Objects. Any thoughts on this?
I find the approach suggested at re:Coding for Stored Procedures is a lot of work! seems to be fine.
Is there any thoughts on converting results directly into Java objects?
Murali

I encountered the same problems.
See the topic I posted: Re: Mapping a Java attribute to the result of a function call
The solution I used is good, but has its restrictions.
I created a database view on the query that uses stored functions. Then, I mapped my object to the database view. Problem solved.
However, like I said, this solution has its restrictions:
1) Your database must support views
2) This only works for read-only queries
I hope this helps you any further.
Kind regards,
Erwin

Does anyone know the best practices to use Captivates on an Elearning course, please...

I need to know the best practices to use captivates on an eLearning course, as how much information should it has, etc..

Hello There,
Adobe Captivate has multiple workflows which can help you to create eLearning courses. It can create various types of learning content and I suggest you to visit the following links.
Product Info: www.adobe.com/products/captivate/
OnDemand Seminars to get more info on what captivate can do: http://www.adobe.com/cfusion/event/index.cfm?event=list&type=ondemand_seminar&loc=en_us
Register for Trainings and Webinars: http://www.adobe.com/cfusion/event/index.cfm?event=list&loc=en_us&type=&product=Captivate& interest=&audience=&monthyear=
If you have specific scenarios to discuss, you can mail me at [email protected] or tweet me at @vish_adobe
Thanks,
Vish
@vish_adobe

How do I access "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...." web sites; when I try to download any alternate browser, then a warning that alternate is "imcompatable with your opera

How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
== URL of affected sites ==
https://storefront.kenexa.com/lithia/cc/Home.ss

There should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
The menu item name changes to the browser UA you are presently using.
There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
You can just start trying IE versions (or the versions it says on the site) until it lets you in.

Best Practices in use of ABAP for SRM and/or CRM Configuration

Similar Messages

Maybe you are looking for