"best practices" on playlists

I've always created a new playlist representing each album in my collection. It dawns on my that there's no reason to do this, because the library already organizes things this way.
Do I lose anything by deleting all of my album-based playlists?

You can safely delete playlists or items in playlists: they are simply pointers to the originals, like aliases in the Finder.

Similar Messages

IOS device playlists - best practices

So here's my conundrum. I have many playlists in iTunes, for listening at home. I want to sync the "best of" each playlist into my iPhone, but still have the songs organized in the same playlist names. For example, if I'm out and about and want to listen to a shuffled playlist of say, rock or mellow or whatever. I have yet to find a satisfactory solution.
I read about the checkbox field, which will only sync checked items. That sounded like just what I needed, however it has an unfortunate side effect of excluding all unchecked items even from at-home listening, unless I check them all again. But if I check them all again, that essentially ruins my iPhone library the next time I sync.
I could just do a smart playlist to sync anything I rate say, 4 or 5 stars...but then the songs don't show up in the right playlists, they all show up in the one playlist.
My current inelegant workaround is basically to have two sets of playlists in iTunes: the original playlists for at home listening which has everything, and pared down versions of all those same playlists for the iPhone (so for example I have Classical, and iPhone Classical, Rock and iPhone Rock, etc). This clutters up my playlist pane quite a bit, and it just seems suboptimal.
Am I missing a feature that might already exist in iTunes that would serve my purpose better? I know about iTunes Match, but isn't quite what I had in mind (plus that's more money). Any other ideas?
Thanks!

nabziF wrote:
My current inelegant workaround is basically to have two sets of playlists in iTunes: the original playlists for at home listening which has everything, and pared down versions of all those same playlists for the iPhone (so for example I have Classical, and iPhone Classical, Rock and iPhone Rock, etc). This clutters up my playlist pane quite a bit, and it just seems suboptimal.
You can create Playlist Folders for playlists.
Creat one for iPhone and one for Home.
To inclutter it, click the little gray triangle to hide the playlists in iTunes.

IPhone Best Practices - A Work In Progress

Hello all. I've been tasked with introducing my coworkers into the inner workings of the iPhone, and there are a good number of pointers that I find myself saying over and over again. I'd like to share my best practices with everyone, as well as collect more pointers and opinions from the community at large.
Care and Handling:
First - wash your hands, often. Now I know we all do this often anyway, but I'd like to point out that a healthy amount of hand washing will really go a long way to keep your iPhone screen smudge free. The worst offender, unfortunately, is doughnuts. A small layer of sugar will render that area un-tappable, without any real indication that it has done so. If you are frantically tapping the screen on the iPod button and nothing is happening, clean your phone before you do a hard reset.
Second - Pockets. Keeping your phone in your front pocket is natural and what most of us do. In these summer months, however, keeping your phone in a sweaty front pocket can do a good deal to the dirt level of the screen. If you find yourself cleaning your phone constantly, try a belt clip.
Lastly - Battery Life. Your iPhone's battery life is in your hands, literally. Being aware of your power consumption and planning accordingly is going to be infinitely more important that the battery's native charge-holding ability. This goes especially for the day of purchase - as tempting as it may be to open the box and activate, immediately running around the house watching YouTube, it is best to let the phone charge for 12 hours before use. Charging the phone every night is an absolute must, skipping a day will kill the battery life as your ride the bottom edge the following day. Most of us have access to a USB port while we're at work, best idea will be to plug in your phone when you sit down at your desk.
iPod:
Large Libraries: In the opening weekend, I got many complaints that you cannot manually manage your music. There is a workaround that has made me change the way I work with all of my iPods: the iPhone specific playlist. Simply create a playlist with all of the music you wish to put on your phone and sync that one playlist. This also helps with sync time - you have a start sync and an end sync, not a constant sync all throughout your music management, slowing your computer down in the process.
TV Shows: I watch a lot of MST3K, which I have organized into iTunes as TV shows, split into seasons, the works. The problem that has arisen, therefore, is the one of selective synchronization - you cannot specifically select the TV show you want to sync to the device, instead getting the choices to sync all, unwatched, or latest shows. This is problematic when each show is 700MB large. Here's the work around - select all of the episodes of a specific show and right click, selecting "Mark as Not New", removing all of the little blue dots from the episodes. Select the one, three, or five episodes, and right click them, selecting "Mark as New", then sync the last one, three, or five unwatched episodes. The shows you selected will sync.
iPhoto:
Many users are complaining that iPhoto opens whenever the phone is connected. This is not a preference of the phone, but rather iPhoto. Remember when you first launched iPhoto and it asked you if you wanted to use iPhoto whenever your camera was attached? iPhoto is detecting that your phone is a camera and launching, just as you told it to do.
Mail:
POP accounts - too many unread messages: When first adding a POP account, all of the messages downloaded to the phone arrive as unread. Tapping a message, tapping back, and then tapping the next message can get tedious. Here's the workaround - tap the small down arrow to the upper right hand side of the screen, watching closely to the number next to Inbox. When that number goes down by one, tap the arrow again. If that number hasn't gone down yet, wait a sec, and do not try to tap tap tap tap tap, you'll flood the input queue and crash Mail.
Syncing Mail accounts - All too often people blame the iPhone when their mail does not work. A perfect test is sync you accounts from Mail. If they work in mail, they'll work on the phone, if they are unreliable in Mail, they will also be unreliable on the phone. The Mail client on the iPhone is just as powerful as any other mail client in terms of how it connects to mail servers, if you are having problems you need to check your settings before blaming the hardware. If you prefer to leave your install of Mail.app alone, create a new user account on your Mac, set up all of the accounts you want there, and use iTunes to sync that data to the phone. Make sure to remove that portion of sync from your actual user account's instance of iTunes, however, or it will all sync back.
This message has not been downloaded from the server: This message has snagged a couple users, but upon investigation, these users have filled their iPhones to the absolute brim with music and video. It hasn't been downloaded from the server because there is no space to download to - this also applies to the Camera application dumping to the Home screen. Because there is no space, it can't add any new data. Make some room, then be patient as the mail client gets to that message in cleanup (often a sync or reboot will clear it up).
Safari:
Safari and iPod: Many users have reported iPod stopping in the middle of browsing, often pouting and pursing their lips crying, "This is terrible, I can't even browse the web and listen to music at the same time?". I then check their phone, and lo and behold they have upwards of eight separate pages open at the same time. This device (like every other computer out there) has a finite amount of memory, each page taking up a significant portion depending on how busy the page is. I've routinely gotten through entire albums while browsing through Safari, but I've got one page open in total, and it's usually mostly text. Keep it to one or two pages open and iPod will run forever if you let it.
Web Apps: "This web app is terrible, it keeps booting me to Home!" When was your last reboot? How many other pages are open? In the same vein as Safari and iPod, Web Apps need a good deal of breathing room - give it to them. Close down other pages, stop iPod, or even reboot. Give the app a clean slate and it will perform, every time. iPhoneRemote users will attest to this.
iCal:
Multiple Calendars - Default Calendar: When adding a new appointment, it adds to the default calendar. Appointments can't be shunted to the correct calendar until after sync anyway, so create an "iPhone" calendar and make that the default. Because it's in that calendar, you'll know enough to move it to the appropriate calendar after sync.
Please feel free to add your own best practices, and ask questions, too.

is there any application you can get for the iphone to enlarge text and phone numbers ?
If included with an email or on a website, yes with no application needed.
If you are referring to the text size for your iPhone's contact list, no.
can you insert a phone number from your contact list into a text message ?
No.
i cant seem to figure it out, does the alarm clock work if you turn off the phone at night,
No - powered off with the iPhone means powered off. Any phone that provides for this is not powered off - it is in deep sleep or deep standby mode, which the iPhone does not support. If you don't want your phone ringing or don't want to receive SMS at night but you want to use the iPhone's alarm feature as a wake-up alarm, you can turn on Airplane Mode before going to bed, which will also conserve the battery if your iPhone is not plugged in at night.
can you send a multi media text message ?
No.

Best Practices for Removing Shots from BDMV folder

CS6 Production Premium Suite
Win7x64
Canon XA10
I would appreciate feedback on the best practices for the following situation:
Using Windows Explorer, I copy the BDMV folder from the XA10 to my Talk2 project folder.
The BDMV folder has three one hour shots (talks) where each shot is one hour called Talk1, Talk2, and Talk3.
Each shot consists of several MTS files in the STREAM folder since MTS files have a maximum file size so a new MTS file is created when a given MTS file reaches the maximum file size.
Since I only want to have Talk2 stuff in my Talk2 project folder, I need to remove the Talk1 and Talk3 stuff from the BDMV folder.
I delete the Talk1 and Talk3 MTS files from the STREAM folder.
I delete the Talk1 and Talk3 CPI files from the CLIPINF folder.
I leave the PLAYLIST folder as is.
Using the Media Browser, I import Talk2 (which consists of two MTS files).
I edit the clip.
This procedure seems to work, but I do not know if there are any "got you" issues.
Thanks in advance.

Oh, don't do it that way. I know a lot of people do, heck, my boss does, but it's just asking for trouble.
Treat your card as if it was your original tape master (because it is). It is the most important thing you have. Don't delete or move any part of it.
If you want to break up the talks, do it as you shoot them. Use separate cards for each talk and archive each one separately. There is too much valuable information in the structure of the card format. You may not need it now but your editing program may need it later.
Hard drive space is cheap but digital recordings are priceless

Logical level in Fact tables - best practice

Hi all,
I am currently working on a complex OBIEE project/solution where I am going straight to the production tables, so the fact (and dimension) tables are pretty complex since I am using more sources in the logical tables to increase performance. Anyway, what I am many times struggling with is the Logical Levels (in Content tab) where the level of each dimension is to be set. In a star schema (one-to-many) this is pretty straight forward and easy to set up, but when the Business Model (and physical model) gets more complex I sometimes struggle with the aggregates - to get them work/appear with different dimensions. (Using the menu "More" - "Get levels" does not allways give the best solution......far from). I have some combinations of left- and right outer join as well, making it even more complicated for the BI server.
For instance - I have about 10-12 different dimensions - should all of them allways be connected to each fact table? Either on Detail or Total level. I can see the use of the logical levels when using aggregate fact tables (on quarter, month etc.), but is it better just to skip the logical level setup when no aggregate tables are used? Sometimes it seems like that is the easiest approach...
Does anyone have a best practice concerning this issue? I have googled for this but I haven't found anything good yet. Any ideas/articles are highly appreciated.

Hi User,
For instance - I have about 10-12 different dimensions - should all of them always be connected to each fact table? Either on Detail or Total level.It not necessary to connect to all dimensions completely based on the report that you are creating ,but as a best practice we should maintain all at Detail level only,when you are mentioning any join conditions in physical layer
for example for the sales table if u want to report at ProductDimension.ProductnameLevel then u should use detail level else total level(at Product,employee level)
Get Levels. (Available only for fact tables) Changes aggregation content. If joins do not exist between fact table sources and dimension table sources (for example, if the same physical table is in both sources), the aggregation content determined by the administration tool will not include the aggregation content of this dimension.
Source admin guide(get level definition)
thanks,
Saichand.v

Best practices for setting up users on a small office network?

Hello,
I am setting up a small office and am wondering what the best practices/steps are to setup/manage the admin, user logins and sharing privileges for the below setup:
Users: 5 users on new iMacs (x3) and upgraded G4s (x2)
Video Editing Suite: Want to connect a new iMac and a Mac Pro, on an open login (multiple users)
All machines are to be able to connect to the network, peripherals and external hard drive. Also, I would like to setup drop boxes as well to easily share files between the computers (I was thinking of using the external harddrive for this).
Thank you,

Hi,
Thanks for your posting.
When you install AD DS in the hub or staging site, disconnect the installed domain controller, and then ship the computer to the remote site, you are disconnecting a viable domain controller from the replication topology.
For more and detail information, please refer to:
Best Practices for Adding Domain Controllers in Remote Sites
http://technet.microsoft.com/en-us/library/cc794962(v=ws.10).aspx
Regards.
Vivian Wang

Add fields in transformations in BI 7 (best practice)?

Hi Experts,
I have a question regarding transformation of data in BI 7.0.
Task:
Add new fields in a second level DSO, based on some manipulation of first level DSO data. In 3.5 we would have used a start routine to manipulate and append the new fields to the structure.
Possible solutions:
1) Add the new fields to first level DSO as well (empty)
- Pro: Simple, easy to understand
- Con: Disc space consuming, performance degrading when writing to first level DSO
2) Use routines in the field mapping
- Pro: Simple
- Con: Hard to performance optimize (we could of course fill an internal table in the start routine and then read from this to get some performance optimization, but the solution would be more complex).
3) Update the fields in the End routine
- Pro: Simple, easy to understand, can be performance optimized
- Con: We need to ensure that the data we need also exists (i.e. if we have one field in DSO 1 that we only use to calculate a field in DSO 2, this would also have to be mapped to DSO 2 in order to exist in the routine).
Does anybody know what is best practice is? Or do you have any experience regarding what you see as the best solution?
Thank you in advance,
Mikael

Hi Mikael.
I like the 3rd option and have used this many many times. In answer to your question:-
Update the fields in the End routine
- Pro: Simple, easy to understand, can be performance optimized - Yes have read and tested this that it works faster. A OSS consulting note is out there indicating the speed of the end routine.
- Con: We need to ensure that the data we need also exists (i.e. if we have one field in DSO 1 that we only use to calculate a field in DSO 2, this would also have to be mapped to DSO 2 in order to exist in the routine). - Yes but by using the result package, the manipulation can be done easily.
Hope it helps.
Thanks,
Pom

Temp Tables - Best Practice

Hello,
I have a customer who uses temp tables all over their application.
This customer is a novice and the app has its roots in VB6. We are converting it to .net
I would really like to know the best practice for using temp tables.
I have seen code like this in the app.
CR2.Database.Tables.Item(1).Location = "tempdb.dbo.[##Scott_xwPaySheetDtlForN]"
That seems to work, though i do not know why the full tempdb.dbo.[## is required.
However, when i use this in the new report I am doing I get runtime errors.
i also tried this
CR2.Database.Tables.Item(1).Location = "##Scott_xwPaySheetDtlForN"
I did not get errors, but I was returned data i did not expect.
Before i delve into different ways to do this, i could use some help with a good pattern to use.
thanks

Hi Scott,
Are you using the RDC still? It's not clear but looks like it.
We had an API that could piggy back the HDBC handle in the RDC ( craxdrt.dll ) but that API is no longer available in .NET. Also, the RDC is not supported in .NET since .NET uses the framework and RDC is COM.
Work around is to copy the temp data into a data set and then set location to the data set. There is no way that I know of to get to the tempdb from .NET. Reason being is there is no CR API to set the owner of the table to the user, MS SQL Server locks the tempdb to that user has exclusinve rights on it.
Thank you
Don

Best Practice for Significant Amounts of Data

This is basically a best-practice/concept question and it spans both Xcelsius & Excel functions:
I am working on a dashboard for the US Military to report on some basic financial transactions that happen on bases around the globe. These transactions fall into four categories, so my aggregation is as follows:
Year,Month,Country,Base,Category (data is Transaction Count and Total Amount)
This is a rather high level of aggregation, and it takes about 20 million transactions and aggregates them into about 6000 rows of data for a two year period.
I would like to allow the users to select a Category and a country and see a chart which summarizes transactions for that country ( X-axis for Month, Y-axis Transaction Count or Amount ). I would like each series on this chart to represent a Base.
My problem is that 6000 rows still appears to be too many rows for an Xcelsius dashboard to handle. I have followed the Concatenated Key approach and used SUMIF to populate a matrix with the data for use in the Chart. This matrix would have Bases for row headings (only those within the selected country) and the Column Headings would be Month. The data would be COUNT. (I also need the same matrix with Dollar Amounts as the data).
In Excel this matrix works fine and seems to be very fast. The problem is with Xcelsius. I have imported the Spreadsheet, but have NOT even created the chart yet and Xcelsius is CHOKING (and crashing). I changed Max Rows to 7000 to accommodate the data. I placed a simple combo box and a grid on the Canvas u2013 BUT NO CHART yet u2013 and the dashboard takes forever to generate and is REALLY slow to react to a simple change in the Combo Box.
So, I guess this brings up a few questions:
1)     Am I doing something wrong and did I miss something that would prevent this problem?
2)     If this is standard Xcelsius behavior, what are the Best Practices to solve the problem?
a.     Do I have to create 50 different Data Ranges in order to improve performance (i.e. Each Country-Category would have a separate range)?
b.     Would it even work if it had that many data ranges in it?
c.     Do you aggregate it as a crosstab (Months as Column headings) and insert that crosstabbed data into Excel.
d.     Other ideas that Iu2019m missing?
FYI: These dashboards will be exported to PDF and distributed. They will not be connected to a server or data source.
Any thoughts or guidance would be appreciated.
Thanks,
David

Hi David,
I would leave your query
"Am I doing something wrong and did I miss something that would prevent this problem?"
to the experts/ gurus out here on this forum.
From my end, you can follow
TOP 10 EXCEL TIPS FOR SUCCESS
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/204c3259-edb2-2b10-4a84-a754c9e1aea8
Please follow the Xcelsius Best Practices at
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a084a11c-6564-2b10-79ac-cc1eb3f017ac
In order to reduce the size of xlf and swf files follow
http://myxcelsius.com/2009/03/18/reduce-the-size-of-your-xlf-and-swf-files/
Hope this helps to certain extent.
Regards
Nikhil

Best-practice for Catalog Views ? :|

Hello community,
A best practice question:
The situtation: I have several product categories (110), several items in those categories (4000) and 300 end-users. I would like to know which is the best practice for segment the catalog. I mean, some users should only see categories 10,20 & 30. Other users only category 80, etc. The problem is how can I implement this ?
My first idea is:
1. Create 110 Procurement Catalogs (1 for every prod.category). Each catalog should contain only its product category.
2. Assign in my Org Model, in a user-level all the "catalogs" that the user should access.
Do you have any idea in order to improve this ?
Saludos desde Mexico,
Diego

Hi,
Your way of doing will work, but you'll get maintenance issues (to many catalogs, and catalog link to maintain for each user).
The other way is to built your views in CCM, and assign these views to the users, either on the roles (PFCG) or on the user (SU01). The problem is that with CCM 1.0 this is limitated, cause you'll have to assign one by one the items to each view (no dynamic or mass processes), it has been enhanced in CCM 2.0.
My advice:
-Challenge your customer about views, and try to limit the number of views, with for example strategic and non strategic
-With CCM 1.0 stick to the procurement catalogs, or implement BADIs to assign items to the views (I experienced it, it works, but is quite difficult), but with a limitated number of views
Good luck.
Vadim

Best practice on sqlite for games?

Hi Everyone, I'm new to building games/apps, so I apologize if this question is redundant...
I am developing a couple games for Android/iOS, and was initially using a regular (un-encrypted) sqlite database. I need to populate the database with a lot of info for the games, such as levels, store items, etc. Originally, I was creating the database with SQL Manager (Firefox) and then when I install a game on a device, it would copy that pre-populated database to the device. However, if someone was able to access that app's database, they could feasibly add unlimited coins to their account, unlock every level, etc.
So I have a few questions:
First, can someone access that data in an APK/IPA app once downloaded from the app store, or is the method I've been using above secure and good practice?
Second, is the best solution to go with an encrypted database? I know Adobe Air has the built-in support for that, and I have the perfect article on how to create it (Ten tips for building better Adobe AIR applications | Adobe Developer Connection) but I would like the expert community opinion on this.
Now, if the answer is to go with encrypted, that's great - but, in doing so, is it possible to still use the copy function at the beginning or do I need to include all of the script to create the database tables and then populate them with everything? That will be quite a bit of script to handle the initial setup, and if the user was to abandon the app halfway through that population, it might mess things up.
Any thoughts / best practice / recommendations are very appreciated. Thank you!

I'll just post my own reply to this.
What I ended up doing, was creating the script that self-creates the database and then populates the tables (as unencrypted... the encryption portion is commented out until store publishing). It's a tremendous amount of code, completely repetitive with the exception of the values I'm entering, but you can't do an insert loop or multi-line insert statement in AIR's SQLite so the best move is to create everything line by line.
This creates the database, and since it's not encrypted, it can be tested using Firefox's SQLite manager or some other database program. Once you're ready for deployment to the app stores, you simply modify the above set to use encryption instead of the unencrypted method used for testing.
So far this has worked best for me. If anyone needs some example code, let me know and I can post it.

Best Practice Table Creation for Multiple Customers, Weekly/Monthly Sales Data in Multiple Fields

We have an homegrown Access database originally designed in 2000 that now has an SQL back-end. The database has not yet been converted to a higher format such as Access 2007 since at least 2 users are still on Access 2003. It is fine if suggestions
will only work with Access 2007 or higher.
I'm trying to determine if our database is the best place to do this or if we should look at another solution. We have thousands of products each with a single identifier. There are customers who provide us regular sales reporting for what was
sold in a given time period -- weekly, monthly, quarterly, yearly time periods being most important. This reporting may or may not include all of our product identifiers. The reporting is typically based on calendar-defined timing although we have
some customers who have their own calendars which may not align to a calendar month or calendar year so recording the time period can be helpful.
Each customer's sales report can contain anything from 1,000-20,000 rows of products for each report. Each customer report is different and they typically have between 4-30 columns of data for each product; headers are consistently named. The
product identifiers included may vary by customer and even within each report for a customer; the data in the product identifier row changes each week. Headers include a wide variety of data such as overall on hand, overall on order, unsellable on hand,
returns, on hand information for each location or customer grouping, sell-through units information for each location or customer grouping for that given time period, sell-through dollars information for each location or customer grouping for that given time
period, sell-through units information for each location or customer grouping for a cumulative time period (same thing for dollars), warehouse on hands, warehouse on orders, the customer's unique categorization of our product in their system, the customer's
current status code for that product, and so on.
Currently all of this data is stored in a multitude of Excel spreadsheets (by customer, division and time period). Due to overall volume of information and number of Excel sheets, cross-referencing can take considerable time. Is it possible to
set-up tables for our largest customers so I can create queries and pivot tables to more quickly look at sales-related information by category, by specific product(s), by partner, by specific products or categories across partners, by specific products or
categories across specific weeks/months/years, etc. We do have a separate product table so only the product identifier or a junction table may be needed to pull in additional information from the product table with queries. We do need to maintain
the sales reporting information indefinitely.
I welcome any suggestions, best practice or resources (books, web, etc).
Many thanks!

Currently all of this data is stored in a multitude of Excel spreadsheets (by customer, division and time period). Due to overall volume of information and number of Excel sheets, cross-referencing can take considerable time. Is it possible to
set-up tables .....
I assume you want to migrate to SQL Server.
Your best course of action is to hire a professional database designer for a short period like a month.
Once you have the database, you need to hire a professional DBA to move your current data from Access & Excel into the new SQL Server database.
Finally you have to hire an SSRS professional to design reports for your company.
It is also beneficial if the above professionals train your staff while building the new RDBMS.
Certain senior SQL Server professionals may be able to do all 3 functions in one person: db design, database administration/ETL & business intelligence development (reports).
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Best Practice to fetch SQL Server data and Insert into Oracle Tables

Hello,
I want to read sqlserver data everry half an hour and write into oracle tables ( in two different databases). What is the best practice for doing this?
We do not have any database dblinks from oracle to sqlserver and vice versa.
Any help is highly appreciable?
Thanks

Well, that's easy:
use a TimerTask to do the following every half an hour:
- open a connection to sql server
- open two connections to the oracle databases
- for each row you read from the sql server, do the inserts into the oracle databases
- commit
- close all connections

Best Practice for Image placement and Anchored Frames for use in Robohelp 9

Hi,
I'm looking for the best practices in how to layout my images in Framemaker 10 so that they translate correctly to Robohelp 9. I currently have images inside of Anchored frames that "Run into" the right side of my text. I've adjusted the size of the anchored frame so that my text flows correctly around the image. Everything looks good in Framemaker! Yeah! The problem is that when I link my Framemaker document to Robohelp, the text does not flow around my image in the same manner. On a couple of Robohelp screens the image is running into the footer. I'm wondering if I should be using tables in Framemaker in order to get the page layout that I'm looking for. Also, I went back and forth...is this a Framemaker question or is this a Robohelp question. Any assistance would be greatly appreciated.

I think Jeff is meaning this section of the RoboHelp forums:
http://forums.adobe.com/community/robohelp/robohelp_framemaker

Best practice for a same query against 2 different tables

Hello all,
I want to extract info about tablespaces storage, both permanent and temporary. For that I use 2 different cursors that do exactly the same query but against a different table (dba_data_files and dba_temp_files).
CURSOR permanentTBSStorageInfo (tablespaceName VARCHAR2) IS
SELECT file_name, bytes, autoextensible, maxbytes, increment_by
FROM dba_data_files
WHERE tablespace_name = tablespaceName;
CURSOR temporaryTBSStorageInfo (tablespaceName VARCHAR2) IS
SELECT file_name, bytes, autoextensible, maxbytes, increment_by
FROM dba_temp_files
WHERE tablespace_name = tablespaceName;
First I'm bothered that I have to use 2 cursors to execute the same query against 2 different tables. Is there no another way around?
Then I fetch the results of this cursors in 2 different loops because I didn't find a way to dynamically call the cursors. I am looking for best practice here, knowing that I will do the same parsing against the results of the 2 cursors.
Thank you,

Hi
Check whether the below query is helpful or not
select      fs.tablespace_name "Tablespace",
     fs.tempspace "Temp MB",
     df.totalspace "Total MB"
     from
     (select
     tablespace_name,
     round(sum(bytes) / 1048576) TotalSpace
     from
     dba_data_files
     group by
     tablespace_name
     ) df,
     (select
     tablespace_name,
     round(sum(bytes) / 1048576) tempSpace
     from
     dba_temp_files
     group by
     tablespace_name
     ) fs
     where
     df.tablespace_name = fs.tablespace_name;
Thanks

"best practices" on playlists

Similar Messages

Maybe you are looking for