Best Practices & Strategy Planning for SAP BI Architecture

What are best practices and strategy planning that SAP BI Architect should know?
What are the challenges are involved with this role ?
What are the other information that this Architect should know to deliver the robust BI solution?
Is there any white papers on the best practices on Architecture & Data Modeling, please ?
Thanks,
Venkat.

Hi
As per the Best Practice  first load the master and next transaction data .
Please find the link for best practices
http://www.sap.com/services/pdf/BWP_SAP_Best_Practices_for_Business_Intelligence.pdf.
Regarding the architecture it depend upon the size of volumen and how much frequency  your load and  hard ware sizing
based on this  we can provide best  solution
If you any issues please let me know
Regards
Madan

Similar Messages

  • Best practice: Deployment plan for cluster environment

    Hi All,
    I want to know, which way is the best practice for preparing and deploying new configuration for WLS-cluster environment. How can I plan a simultan deployment of ALL of nodes, with out single point of failure?
    Regards,
    Moh

    Hi All,
    I get the Answer as followed:
    When you deploy an application OR redeploy an application, the deployment is initiated from the Admin Server and it it initiated on all targets (managed servers in the cluster) at the same time based on targets (which is expected to be cluster).
    We recommend that applications should be targeted to a cluster instead of individual servers whenever a cluster configuration is available.
    So, as long as you target the application to the cluster, the admin server will initiate the deployment on all the servers in a cluster at the same type, so application is in sync on all servers.
    Hope that answers your queries. If not, please let me know what exactly you mean by synchronization.
    Regards,
    Moh

  • [More information] 'SAP Best Practices Baseline package for Brazil V3.607'

    Hi.
    When I study 'SAP Best Practices Baseline package for
    Brazil V3.607', I wonder somthing.
    I want solution of problem.
    ---------Problem---------
    In '100: SAP Best Practices Installation' document on point 3.4 Define Tax Jurisdiction Code it says
    Enter the Jurisdiction Codes according to the document SMB41_J_1BTXJURV_B020_NFE.TXT.
    I have search the internet for this document and the only hit is the actual Best practice document.
    Does anybody knows where to get this document?
    ASAP, reply for me.
    Thanks.

    Dear Dimitry,
    the Best Practice baseline content is freely available to anyone w/o any charge.
    You find the whole content about it at:
    SAP Best Practices package for Russia V3.607 (English)
    SAP Best Practices package for Russia V3.607 (Russian)
    Kind Regards,
    Jan

  • SAP Best Practices Baseline package for Russia V3.607

    Dear colleagues,
    My partner - BearingPoint Russia - has an interest to SAP Best Practices Baseline package for Russia V3.607
    Would you please help to find the contact whom they can ask the questions about content & price to?
    Best regards,
    Dmitry Popov

    Dear Dimitry,
    the Best Practice baseline content is freely available to anyone w/o any charge.
    You find the whole content about it at:
    SAP Best Practices package for Russia V3.607 (English)
    SAP Best Practices package for Russia V3.607 (Russian)
    Kind Regards,
    Jan

  • Install Best Practices- Baseline Package for ECC 6.0 EHP4

    Hi All,
    I know its not the right forum to post this message, but posting here as i didnt get the info from the related forum, apologies for that.
    Now we are planning to install SAP Best practices-Baseline Packages for ECC-EHP4 in our new server.
    Can anybody help me out what are the steps to be carried out. Now we have completed installation of Linux & we want to install BP for General, not for any specific industry.
    B/regds,
    CB

    Please post this question in SAP Basis Forum.
    Alternatively, you can check documents in scribd/ help.sap.com
    Raghavan

  • Best Practices Building Blocks for CRM 5.0 & CRM 2007

    Hi Experts,
    Where can I find Best Practices Building Blocks for CRM 5.0 & CRM 2007?
    Thanks in advance,
    Vishwa.

    Hi
    Go to: http://help.sap.com/
    Click on the Best Practices Tab,
    Then Cross-Industry Packages,
    Then Customer Relationship Management
    They should all be under there.
    Regards
    Arden

  • Best practices of integration with SAP Netweaver

    Hi All,
    I'm totally new to SAP Netweaver but I have a task to integrate our system with SAP ECC (R/3). We are using SAP Netweaver 6.4. The goal of integration is to provide for user list of available modules (Sales and Distribution, Human Resource, Payroll, etc) and when user selected for example Payroll we need to display list of available BAPIs. In general weare able to create Enterprise Web Service for some BAPI and consume it. But the problem is that everytime when administrator changed BAPI process (for example added new field to Business Object) we need to regenerate wsdl and change our client application. Does Netweaver provide some Web Service which can retrieve list of applications, list of BAPI processes and can retrieve meta data of some BAPI? Something like Partner Web Service interface?
    We are looking for best practices of integration with SAP Netweaver. We are trying to develop something like adapter which will be able to pull data into SAP ECC system is there any generic way to develop this adapter?
    Thanks in advance for your help.
    Yura.

    Hi Yura !!
    As far as I know, this is not possible yet. Using SAP Netweaver XI/PI, although it adds value to the webservice scenario exposing BAPI functionality, it also needs to maintain a refreshed version of the BAPI definition in its repository. Depeding the complexity of the change in the BAPI structure, maybe PI may allow you to continue working without changes.
    Maybe a good practice is not to make too much changes to a production BAPI, instead make a review in development environment, and once it is stable, use it in production. Other good practice is to keep older versions of BAPIs and add the changed ones as new versions to have back-compatibility
    Regards,
    Matias.

  • Project Plan for "SAP BW Implimentation" project.

    Hi All,
    My name is Rajasekhar. I am a BW consultant. I would like to know the standard template for PP ( Project Plan ) for SAP BW Implimentation Project.
    1) Could you please suggest me any link available in SAP to get the Project Plan and related documents.
    2) In some of the BW books, it is mentioned that the standared project plan recommended by SAP is "ETBWPP03.doc". I couldn't find this document also. If you know the link, request you provide the info.
    Full points willl be awarded for the best reply.
    Thanks & Regards,
    Raj.

    Hello Rajasekhar,
    Please see the links
    http://help.sap.com/bp_biv270/documentation/BWProjectPlan_EN.mpp
    http://help.sap.com/bp_biv270/index.htm
    Thanks
    Chandran

  • Best Practice: Export unrendered for internet

    Hi
    As I recall, in previous versions of FCPX  it was considered best practice, at least for exports for web, to export unrendered.
    Still true? Ever true for all other export reasons?
    I want to post a rough of a film on youtube, unlisted, for a few friends to comment on.
    best
    elmer
    Btw, always seems like when I open my browser while fcpx is open, I get problems and have to delete my prefs to get back to normal. Any reason why? Just curious.

    Steve: If these are bitmaps inside a PDF that's going to be viewed on the iPad, you cannot rely on its "native resolution". Think about this: What if the original page size of this PDF is 5.5" x 8"? What if it is 20" x 32"? Which one will show the images "at their native resolution"?

  • Any known security best practices to follow for FMS deployment

    Hi all,
    We have recently deployed Flash Media Streaming server 3.5.2 and Flash Media Encoder on a Windows 2003 machine. Do you guys know of any security best practices to follow for the FMS server deployment on a Windows machine, could you please point me to that resource.

    Hi
    I will add some concepts, I am not sure how all of them work technically but there should be enough here for you to
    dig deeper, and also alot of this is relevant to your environment and how you want to deploy it.
    I have done a 28 server deployment, 4 origin and 24 edge servers.
    All the Edge servers on the TCP/IP properties we disabled file and printer sharing. Basically this is a way in for hackers and we disabled this only on the edge servers as these are the ones presented to the public.
    We also only allowed ports 1935, 80, 443 on our NICs. Protocol numbers are 6 and 17, this means that you are allowing UDP and TCP. So definitely test out your TCP/IP port filtering until you are confortable that all your connection types are working and secure.
    Use RTMPE over RTMP, as it is there to be used and I am surprised not more people use it. The problem as with any other encryption protocol, it may cause higher overhead on resources of the servers holding the connections.
    You may want to look at SWF verification. In my understanding, it works as the following. You publish a SWF file on a website. This is a source code that your player uses for authentication. If you enable your edge servers to only listen for authentication requests from that SWF file, then hopefully you are really lessening the highjacking possibilities on your streams.
    If you are doing encoding via FME then I would suggest that you download the authentication plugin that is available on the Flash Media Encoder download site.
    There are other things you can look at making it more secure like adaptor.xml, using a front end load balancer, HTML domains, SWF domains,
    Firewalls and DRM.
    I hope this helps you out.
    Roberto

  • Looking for best practice / installation guide for grid agent for RAC

    I am looking for best practice / installation guide for grid agent for RAC, running on windows server.
    Thanks.

    Please refer :
    MOS note Id : [ID 378037.1] -- How To Install Oracle 10g Grid Agent On RAC
    http://repettas.wordpress.com/2007/10/21/how-to-install-oracle-10g-grid-agent-on-rac/
    Regards
    Rajesh

  • Need best practice configuration document for ISU CCS

    I am working on ISU CCS project. i need  best practice cofiguration document for
    Contract management
    Collections management
    Invoicing
    Work Management as it relates to ERP Billing.
    Thanks
    Priya
    priyapandey.sapcrmatgmailcom

    Which version are you setting up and what are the requirements? IF you are discussing the use of NIC bonding for high availability beginning in 11.2.0.2 there is a concept of "High Availability IP" of HAIP as discussed in the pre-installation chapters,
    http://docs.oracle.com/cd/E11882_01/install.112/e22489/prelinux.htm, section 2.7.1 Network Hardware Requirements.
    In essence, using HAIP eliminates the need to use NIC bonding to provide for redundancy.

  • SAP Best Practices baseline package for France on dvd

    Hello guys
    Can someone tell me what's the material number of the dvd documentation of SAP Best practicse baseline package for France and how to ordre it. I did not find it on sap shop and I cannot download it due to the quality of the internet connexion in the region where I m located. I mean, the documentation like the one you have on this sap marketplace website.
    Tks for your help.
    Marcous

    Hello Marcous,
    the material numbers of the dvds for baseline France are: 50098552 (documentation) and 51038439 (config).
    For obtaining the best practices please see the instruction under the following link:
    [url]http://help.sap.com/bp_bl604/BL_FR/html/index.htm[url]
    On page 3 you can find the following:
    "SAP Software Distribution Center on the SAP Service Marketplace (http://service.sap.com/swdc)
    or order via their contracts department. SAP Best Practices are provided free of charge"
    So in your case you should contact your contract department.
    Cheers,
    Andreas

  • Error while Connecting report Best Practices v1.31 with SAP

    Hello experts,
    I'm facing an issue while trying to connect some of my reports from Best Practices for BI with SAP.
    It only happens when it's about info sets, the other ones that are with SAP tables go smoothly without a problem.
    The most interesting is I have already one of the reports connected to SAP info sets.
    I have already verified the document of steps of creation of additional database that comes with BP pack. They seem ok.
    Here goes what Crystal Reports throws to me after changing the data source to SAP:
    For report "GL Statement" one of the Financial Analysis one which uses InfoSet: /KYK/IS_FIGL_I3:
    - Failed to retrieve data from the database; - click ok then...
    - Database connector error: It wasn't indicated any variant for exercise (something like this after translating) - click ok then
    - Database connector error: RFC_INVALID_HANDLE
    For report "Cost Analysis: Planned vs. Actual Order Costs" one of the Financial Analysis one which uses InfoSet: ZBPBI131_INFO_ODVR and ZBPBI131_INFO_COAS; and also the Query CO_OM_OP_20_Q1:
    - Failed to retrieve data from the database; - click ok then...
    - Database connector error: check class for selections raised errors - click ok then
    - Database connector error: RFC_INVALID_HANDLE
    Obs.: Those "Z" infosets are already created in SAP environment.
    The one that works fine is one of the Purchasing Analysis reports:
    - Purchasing Group Analysis -> InfoSet: /KYK/IS_MCE1
    I'm kind of lost to solve this, because I'm not sure if it can be in the SAP JCO or some parameter that was done wrongly in SAP and I have already check possible solutions for both.
    Thanks in advance,
    Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

    I re-checked step 3.2.3 - Uploading Crystal User Roles (transaction PFCG) - of the manual where it talks about CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER roles, I noticed in the Authorizations tab that the status was saying it hadn't been generated and I had a yellow sign, so then that was what I did (I generated) as it says in the manual.
    Both statuses are now saying "Authorization profile is generated" and the sign is now green on the tab.
    I had another issue in the User tab (it was yellow as Authorizations one before generating)....all I needed to do to change to green was comparing user (User Comparison button).
    After all that, I tried once more to refresh the Crystal report and I still have the error messages being thrown.
    There's one more issue in one of the tabs of PFCG transaction, it is on the Menu one where it is with a red sign, but there's nothing talking about it in the manual. I just have a folder called "Role menu" without anything in it.
    Can it be the reason why I'm facing errors when connecting the report to SAP infoSets? (remember one of my reports which is connected to an infoSet works good)
    Thanks in advance,
    Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

  • BPC Best Practices: Sales Planning (BP2)

    Im trying to follow these instructions:
    1. Log on to Interface for Excel.
    To do so start the SAP BPC Launch Page from your desktop icon or via the Start menu of your desktop, then in the Programs folder choose SAP -> Business Planning and Consolidation.
    2. On the SAP BPC Launch Page, choose Interface for Excel. In the dialog box, select the AppSet SAP_BP_Planning and the Application Sales_Planning.
    My problem is that in my BPC Launch Page (at step 2) I don't have these options:
    AppSet: SAP_BP_Planning
    Application: Sales_Planning
    These are the options that I have:
    AppSet: ApShell (in the combo box)
    Application:         (nothing in the combo box)
    Can anyone figure it out why i dont have those options (SAP_BP_Planning, Sales_Planning) ?
    Thanks

    The version I have is BPC 7.5 SP4 with SQL Server 2005
    Im new at this, I installed this software in a Windows Server 2003 Virtual Machine and now im trying to learn how to use this software. I have downloaded the configuration guide and those steps are there. This is the only one step that i couldn't follow:
    3 Prerequisites
    Before you start installing this BPC scenario, you must install prerequisite scenarios. For more information, see the BPC prerequisite matrix (Prerequisites_Matrix_[xx]_EN_JP.xls; the placeholder [xx] depends on the SAP Best Practices version you use, for example, BPC refers to the SAP Best Practices SAP BusinessObjects Planning and Consolidation 7.5: Prerequisites_Matrix_BPC_EN_JP.xls). This document can be found on the SAP Best Practices documentation DVD in the folder \BPC_JP\Documentation\.
    I couldn't find that file in the Best Practices folder (50101040)
    Thanks

Maybe you are looking for