Best practises for install BPEL

We are planning to start to use BPEL, but we are having problems finding any documents on best practise on the install of the product.
1. Sould we install in Lunix or Windows.
2. In prodcution we will need fault tollerance can BPEL do this well.
3. Does the BPEL monitoring work well.
We want to install this right first time rather than just install from the CD's then try to fix the issues we wrong design later, we have been burnt by do this way before.
Regards
Sean Bell

Hi,
1) install it on the platform you know best. because
2) you can only get fault tolerance or high availability on a platform you know how to administer.
for HA look at
http://www.oracle.com/technology/products/ias/bpel/pdf/bpel-admin-webinar.pdf
3) BAM is the word you are searching for:
http://www.oracle.com/technology/products/integration/bam/index.html

Similar Messages

Best practise for installing patches for SCCM Client 2012 (Both x86 and x64)) - OSD and Client Push Installation

Hi All,
What is best practice for automatic installing of SCCM 2012 client Patches
(using Patch switch) during installation of SCCM 2012 clients? The challenge is that now there are two versions of clients and updates (x86 and x64).
I need information for:
OSD
Client Push Installation
Thank you in advance.
Regards,

Not everything that can be or is supported or not supported is documented (or ever can be):
http://technet.microsoft.com/en-us/magazine/jj643252.aspx
Your expectation here needs to be adjusted. No one recommended contacting support. William just mentioned that *if* you have an issue and needed to contact support, they may decline to help you because you've done something explicitly unsupported.
For clientpatch, here's the specific documentation noting it as unsupported:
http://blogs.technet.com/b/configmgrteam/archive/2009/04/08/automatically-applying-hotfixes-to-the-configuration-manager-2007-client-during-installation.aspx
Additionally, I've also been in contact with the sustained engineering folks responsible for the CUs and they've reinforced the statement.
What can happen? Who knows? Microsoft does not test against unsupported configurations and features -- that's the definition of unsupported. It's not tested so no one really knows. They did find a couple of explicit issues (outlined in that post above) so
know that at least those exist and probably more since it is, as mentioned, abandoned code.
Why does it matter what can happen though? If the folks who write and support the code tell you shouldn't do it, you are simply asking for problems by doing it. Ultimately, you're asking a question that has no defined answer (except "bad"/unsupported things)
that really doesn't matter if you follow the explicit guidance. If you don't, as William points out, that's a risk for you take and an answer for you to discover.
Jason | http://blog.configmgrftw.com

Best practise for installing studio

Is there any concensus on best way to have the studio11 installation from the global zone show up in non-global zones? Goal is to have occasionally-used build machines available for differing clients.

No, I don't know of any other way. Sun Studio 11 installed in global zone by default. If you want to install SS11 into other zone, you need to login into that zone and install SS11.

How to install Best Practise for HCM

Hi all:
Could you please tell me how to install best practise for HCM , as there is no autoran file.
Thank you very much!!!
Best regards
Frank

Hi,
Did you chk this link;
http://help.sap.com/content/bestpractices/overview/index.htm
http://help.sap.com/bp_hcmv1600/HCM_US/HTML/index.htm
Regards
CSM Reddy

ECC 6.0 upgrade to Best practise for chemical industry implementation

Dear All.,
Please tell me what all the EHP3 must be updated in the SAP erp ecc 6.0. I have already updated
SAP_APPL 60304.
Tell me what is the next Ehp3 required before i start best practise in saint.
Thanks & Regards,
Manju

Dear sir.,
I have installed SAP ECC 6.0 for a chemical industry, now am planning to implement Best practise to reduce implementation time.
1) As per the SAP Quick quide i have downloaded best practise for chemical industry(IS) and implemented through SAINT, and the prerequisites were maintained as per the SAP notes 774615,1301301,1064635,
2)The above mentioned notes explains minimum stack11 and sapka=18,sapkb=18,sapbw=20,PI_Basis-2005_1_700=20 and sap_ap=15 to update Ehp3 for SAP_APPL603.
3) After updating all the above mentioned patch level i implemented the Best practise in saint and that was successful.
But still the problem persist in activation of BP by tcode /n/smb/bbi only 70% has been completed and activation stoped with *ABAP program error ASSIGNSUBSTRING_NOT_ALLOWED and relevent note is 1295083*_
Please any one tell me, is that required to update all the EHP3 components since i have maintained only SAP_APPL60304.
What all Ehp3 components should be updated to get a smooth activation og BP for chemical industry.

Best practice for install oracle 11g r2 on Windows Server 2008 r2

Dear all,
May I know what is the best practice for install oracle 11g r2 on windows server 2008 r2. Should I create a special account for windows for the oracle database installation? What permission should I grant to the folders where Oracle installed and the database related files located (datafiles, controlfiles, etc.)
Just grant Full for Administrators and System and remove permissions for all others accounts?
Also how should I configure windows firewall to allow client connect to the database.
Thanks for your help.

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

What is best practice for installing Yosemite

I am currently on OS X Mavericks version 10.9.5 Macbook pro 13. 2.6 ghz intel for i5, 8gb 1600 mhz ddr3.
I am now downloading yosemite 10.10.1 but since i've been reading all these negative feedback so far, i am having second thoughts if i should continue to install the upgrade or not.
Any suggestion What is best practice for installing Yosemite? Or is it not yet time to upgrade since the platform is premature yet?
Thanks in advance.

Check your apps are compatible with 10.10 - roaringapps.com
http://www.etresoft.com/etrecheck can show what is running & installed - look for updates on the developer own sites.
If you have many kernel extensions or startup items look for updates to them too
Take a full bootable backup to another disk via Carbon Copy Cloner, Super Duper! or Disk Utility
Disconnect the backup before you begin any install (ideally set it aside & leave it untouched incase you need to go back to 10.9)
Personally I prefer a clean install when there are signs of multiple migrations (if you have upgraded several OS for a period of years). Setup Assistant/ Migration Assistant can import user data from a backup, but consider that Apps & 'other data' should be manually reinstalled from the latest versions.
If you clean install (erase the HD before installation) then make sure you deauthorise iTunes & any other apps that are associated online (like find my Mac).
Basically the steps you would take before selling a Mac…
What to do before selling or giving away your Mac - Apple Support

What is the best practise for setting dirty flag of a page/view?

For a page/view, normaylly there are 2 things to do for diry data:
1. when it's clean, Save button is disabled, when it's dirty, save button is enabled.
2. when it's dirty and the window is closed, a popup says "you have unsaved data, close will lose the data".
My thought is: it must be handled at client side, because not all valuechange is auto submitted. E.g., you type the 1st letter of a string in a input box, the server side does not know it, but save button should be enabled immediately.
Is it possible to capture all valueChange events in a page or a view at client side?
I'm not sure what is the best practise for setting dirty flag? If there is better solution? Does ADF provide facility for this?

public void save(ActionEvent event){
boolean formValid = isFormValid();
   if (formValid) {
save button is enabled.
    private boolean isFormValid() {
        boolean valid = true;
        if (Check Condition 1) {
            valid = false;
           showErrorMessage1();
        if (Check Condition 2) {
            valid = false;
           showErrorMessage1();
        return valid;
    private void showErrorMessage1() {
                when it's dirty and the window is closed, a popup says "you have unsaved data, close will lose the data".

Best Practise for connecting to Ethernet based device

Hi,
I have inherited a system where we have a cDAQ-9181 controlling an vehicle access barrier, with a LabView application on a PC talking to it via Ethernet.
(The application is very simple - press a button > send a value to the 9181 unit > opens the barrier )
All works fine most of the time.
( We occasionally get network related errors. The LabView application sometimes thinks another PC has reserved the unit, or gives “error 89130 - device not available for routing” )
The users would now like to be able to easily run the application from a second PC ( not at the same time ), but this seems to be a problem. If I exit the application on PC “A” and run it on PC “B” it struggles to reserve the chassis, and throws the “89130” error and I have to restart the unit via MAC.
While I’m a “veteran” control programmer, I’m new to LabView, and would be very grateful for any pointers on “best practise” for talking to devices via Ethernet, or any specific suggestions for handling multiple PCs talking to a single device.
Thank You.
Tim.

Hi Tim,
Thank you for your post and welcome to the NI forums.
There are lots of knowledgebase articles on our website and you should be able to find documentation for most of our hardware.
There is a good troubleshooting guide for cDAQ Ethernet here (http://ae.natinst.com/public.nsf/web/searchinternal/e67b4e4749f378ff862577270059bd4b?OpenDocument) - it outlines the steps to take to ensure you have a stable a connection as possible. You may have already seen it, but the quick-start guide for your specific device may also be worth consulting for best practices. Are these helpful?
As for using more than one PC - this shouldn't be too much of an issue. I would expect that the resource isn't being closed correctly - when you exit the App on PC 'A', how are you closing off the resource?
Best regards,
Eden S
Applications Engineer
National Instruments UK & Ireland

Best Practise for rebooting ISE Nodes?

Hello Community,
I administer an ISE installation with two nodes (I am not an ISE Specialist, my job is just to manage the user/mac-adresses... but now I have to move my ISE Nodes from one VMWare Cluster to another VMWare Cluster.
(Both VMWare environments are connected to our enterprise network, but are different environments. vMotion not possible)
I would shutdown ISE02, move it to our new VMWare environment and start it again.
Than I would do this with our ISE01 Node...
Are there any best practises for doing this? (Shutdown application first, stopl replikation etc)?
Can I really simply reboot an ISE Node - or have I consider something bevor I doing this? After I doing this?
Any tasks after reboot?
Thank you for any answer!
ISE01
Administration, Monitoring, Policy Service
PRI(A), SEC(M)
ISE02
Administration, Monitoring, Policy Service
SEC(A), PRI(M)

There is a lot to consider here. If changing environments means changing IP Address and IP Scopes, then your policies, profiles, and dACLs would also have to change among other things. If this is the case, create a new ISE VM in the new environment using the built in evaluation license and recreate the deployment from the old environment using the addressing scheme of the new environment. Then spin-up a new Secondary node and register it on the Primary. Once this is done, you can re-host the license from your old environment onto your new environment. You can use this tool to re-host:
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=3999
If IP Addressing is to remain the same, it gets simpler.
First, and always, perform a configuration and operational backup.
If downtime is not an issue, or if you have a maintenance window of an hour or so: Simply shut down both nodes. Transfer them to the New Environment and turn them on, Primary Node first, of course.
If downtime is an issue, shut down the Secondary Node and transfer it to the New Environment. Start the Secondary Node and when it is up, shut down the Primary Node. Once services on the primary node have stopped, promote the Secondary Node to Primary Node.
Transfer the OLD Primary Node to the New Environment and turn it on. It should assume the role of Secondary Node. If it does not, assign that role through the GUI.
Remember, the correct way to shut down an ISE node is:
application stop ise
halt
By using these commands, the risk of database corruption decreases by about 90% (Remember to always backup).
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

SAP Best Practises for Logistic Modules

Dear Reader,
Does anyone know how to find SAP Best Practises for Netweaver 2004s Logistic scenarios (SD, MM,)
The old Netwvr 2004 scenarioas are less helpful, especially in Inventory mgmt.
Thanks

Check this link, this is the latest I guess.
[SAP Best Practices|http://help.sap.com/bp_bw370/html/index.htm]
Cheers,
Neel.

Best practises for replication

Hi,
I want to know what is best practise for duration of replicaation of database between two Cisco ACS.
Regards,
Atif.

Hi Atif,
The replication time interval should always be higher.
Reason: Everytime you replicate the data it requires ACS services to restart so doing this frequently may affect your production enviroment.
However, if you want to replicate internal user's password then there is an option to replicate password changes right awayvwithout a full replication. You can enable this option under System Configuration -> Local Password Management. With this enabled you could potentially set the replications to a larger interval.
It also depend how often you do changes in your ACS. If its normal then I would say set it to every sunday 12:00 PM.
This is how replication happens:
The primary ACS stops its authentication and creates a copy of the ACSinternal database components that it is configured to replicate. During this
step, if AAA clients are configured properly, those that usually use the primary ACS fail over to another ACS. The primary ACS resumes its authentication service.
After the preceding events on the primary ACS, the database replication process continues on the secondary ACS. The secondary ACS stops its authentication service and replaces its database components with the database components that it received from the primary ACS. During this step, if AAA clients are configured properly, those that usually use the secondary ACS fail over to another ACS. The secondary ACS resumes its authentication service.
HTH
Regards,
JK
Plz rate helpful posts-

Best Practises for doing Master Scheduling using SNP

Hello Gurus ,
Can you please suggest the best practises for doing Master Scheduling using SNP . Which engine to use , what would that mean etc
Regards,
Nick

APC Back-UPS XS 1300. $169.99 at Best Buy.
Our power outages here are usually only a few seconds; this should give my server about 20 or 25 minutes run-time.
I'm setting up the PowerChute software now to shut down the computer when 5 minutes of power is left. The load with the monitor sleeping is 171 watts.
This has surge protection and other nice features as well.
-Noel

Docs for install BPEL PM with 9i/10g RDBMS

Hi all,
Where can I find documents for install BPEL PM 10.1.2.0 Beta with 10g database?
Thanks

Found it.
Thanks.

Wats the best practise for performance

Hi all,
In my out line i have 15 dimensions and for one dimension i have 39000 members so wat is the best practise for performance , If we have more dimensions and more meebers is there any problem for performance
so wat is the best practise for dimensions and members??
Thanks in advance??

If it is ASO application it is not a problem.
If it is a BSO application surely it will hit the performance.
More dimensions will create performance issues.
If the said 39000 members dimension is a Flat dimension. It will be another issue.
If BSO is obvious try to split into two models.
Create intermediate groupings for the Filat dimension.

Best practises for install BPEL

Similar Messages

Maybe you are looking for