Best pratices for Wide Aperture lenses (what are ?)

Wide angle + wide aperture = rejected images in LPC.
What's recommended ?
- Use a chart (same size) with bigger squares
- Move less (right/left)
- Combination of both (!)
Wide aperture is where corrections are the most needed.
I'm surprised that the LPC algorithm doesn't start with
small aperture images and then finish with wider apertures.

I believe there is a recommendation in the shooting guide that suggests to use a checkerboard with a larger square when calibrating fisheye/circular fisheye lenses, because of the large amount distortion at the image periphery. The specification of the correct (smallest) screen size of the checker square becomes more important.

Similar Messages

Best pratices for the customizing about the performance

Hello,
I would like to know the list of the best pratices for the customizing BPC NW 7.5 about the performance.
Best regards
Bastien

Hi,
There are few how to guides on SDN which will give you a basic idea on script logic. Apart from this, you can refer to the help guide on help. sap.com.
The templates might also effect the performance. The number of EVDRE functions, the number of expansion dimensions, the number of members on which expansion takes place will effect the performance. A complex formatting in the template will also effect.
Hope this helps.

Best pratices for GATP by SAP

Hi all,
I am not able to download best pratices for GATP by SAP from http://help.sap.com/bp_scmv250/BBLibrary/HTML/ATP_EN_DE.htm. Seems the documents are removed. Can some one who already downloaded share the same with me?
Also can you provide working links for best pratices for SNP and PP/DS?
Thankyou,
Ram

Hello Ram
Please check this wiki page - it has good content and some useful links
APO-GATP General Information - Supply Chain Management (SCM) - SCN Wiki
and
Find out more on RDS solution for GATP at : http://service.sap.com/rds-gatp
if you search http://service.sap.com/bestpractices you will find a documents about best practice in GATP. The help.sap.com for GATP is a good resource too to start with as well.
Also you can read below blog written by me
Global Available To Promise (GATP) Overview
Hope this will help
Thank you
Satish Waghmare

Is there any commercial support for LCCS services? What are the associated SLAs

Hi,
Following are some queries regarding LCCS.
Is there any commercial support for LCCS services? What are the associated SLAs of the support and the cost?
Can I Using applications developed using LCCS for commercial purpose?
Does Adobe allows its LCCS service customers to offer applications developed using LCCS API for 3rd party commercial usage.
Thanks & Regards
Amit

Hi,
We were selling LCCS to enterprise customer under a different licensing program, but have since stopped the sale of that.
You should check out this thread - http://forums.adobe.com/message/4110049#4110049 for a discussion on this.
Jeff

I found some little black dots n my iPhone 5 screen. I've only had it for 2 weeks. What are they and will apple replace my iPhone for a new one or fix it?

I found some little black dots n my iPhone 5 screen. I've only had it for 2 weeks. What are they and will apple replace my iPhone for a new one or fix it?

They should have one in Stock, but you never know. Call your Apple Store and tell them you have an iPhone 5 color and GB, and that you most likely will need a replacement, do they have any in Stock. If yes, go in, if not ask for advice on how to handle your problem.

Camera faulty on iphone I have taken it to apple store but because they have already replaced it within the last 12 months for something else they said they can't do anything even though I have paid for apple care. What are my rights ?

Camera faulty on iphone I have taken it to apple store but because they have already replaced it within the last 12 months for something else they said they can't do anything even though I have paid for apple care. What are my rights ?

Contact AppleCare

I overcharged my ipad 2 battery for about 3 hours. what are the consequences, i overcharged my ipad 2 battery for about 3 hours. what are the consequences

i overcharged my ipad 2 battery for about 3 hours. what are the consequences? and there are these tiny fibers and dust that enters insideipad screen. how will i clean them. .please help

Relax, you cannot "over" charge it. The built in charging protection ensures it will not overcharge the battery or do any damage leaving it plugged in. Many folks (myself included) leave our iPads and iPhones plugged in overnight, all night, so they are charged and read for use the next day.

ADF Faces & BC: Best pratices for project layout

Season greetings my fellow JDevelopers!
Our software group has been working with ADF for around 5 years and through the years we have accumulated a good amount of knowledge working with JDeveloper and ADF. Much of our current application structure has been resurrected in the early days of JDeveloper 10 where there were more samples codes floating around then there were "best pratice" documentation. I understand this is a subjective topic and varies site to site, but I believe there is a set of common practices our group has started to identify as critical to streamlining a development process(reusable decorated ui components, modular common biz logic, team development with svn, continuous integration/build, etc..). One of our development goals is to minimize dependency between each engineer as everyone is responsible for both client and middle layer implementation without losing coding consistency. After speaking with a couple of the aces at the last openworld, I understand much of our anticipated architectural requirements are met with JDeveloper 11(with the introduction of templates, declarative components, bounded task flows, etc..) but due to time constraints on upcoming deliverables we are still about an year away before moving on with that new release. The following is a little bit about our group/application.
JDeveloper version: 10.1.3.4
Number of developers: 7
Developer responsibilties: Build both faces & bc code
We have two applications currently in our production environments.
1.A flavor of Steve Muench's dynamic jdbc credentials login module
2.Core ADF Faces & BC application
In our Core ADF Faces application, we have the following structure:
OurApplication
     -OurApplicationLib (Common framework files)
     -OurApplicationModel (BC project)
          -src/org/ourapp/module1
          -src/org/ourapp/module2
     -OurApplicationView (Faces project)
          public_html/ourapp/module1
          public_html/ourapp/module2
          src/org/ourapp/backing/module1
          src/org/ourapp/backing/module2
          src/org/ourapp/pageDefs/
Total Number of Application Modules: 15 (Including one RootApplicationModule which references module specific AMs)
Total Number View Objects: 171
Total Number of Entities: 58
Total Number of BC Files: 1734
Total Number of JSPs: 246
Total Number of pageDefs: 236
Total Number of navigation cases in faces-config.xml: 127
Total Number of application files: 4183
Total application size: 180megs
Are there any other ways to divide up this application? Ie: module specific projects with seperate faces-config files/databindings? If so, how can these files be "hooked" together? A couple of the aces has recommended that we should separate all the entity files into its own project which make sense. Also, we are looking into the maven builds which should remove those pesky model.jpr files that constantly gets “touched”. I would to love hear how other groups are organizing their application and anything else they would like to share as an ADF best pratice.
Cheers,
Wes

After discussions over the summer/autumn by members of the ADF Methodology Group I have published an ADF Coding Standards wiki page that people may find useful:
[http://wiki.oracle.com/page/ADF+Coding+Standards]
It's aimed at ADF 11g and is intended to be a living document - if you have comments or suggestions please post them to the ADF Methodology google group ( [http://groups.google.com/group/adf-methodology?hl=en] ).

Best pratices for ODI interfaces

I was wondering how everyone is handling the errors that occur when running an interface with ODI.
Our secinaro:
We have customer data that we want to load each night via ODI. The data is in a flat file and a new file is provided each night.
We have come across an issue where a numeric field had data that was non numeric in it ... so ODI created a bad file ... with the bad record in it .... and an error file with the error message. We then had some defined constraints that forced records into the E$ table.
My question is how does everyone handle looking for these errors. We would like them to just bereported to one place ( an oracle table ) so when the process runs we can just look at the one table and then act on the issues.... as shown above ODI puts errors in two different places... DB ones in a flat file and user defined in the E$ tables.....
I was wondering if anyone has come across this issue and might be able to tell me what was done to handle the errors that occurr .. or what the best pratices might be for handling these errors?
Thanks for any assistance.
Edited by: 832187 on Sep 29, 2011 1:18 PM

If you have got few fields affected by conversion problem you could try insert an ODI constraint or you could modify LKM to load bad file if present.

Best option for protecting the palm wrest area from staining?

My new white MacBook is scheduled to be delivered tomorrow. I currently use a blackbook. Anyway, I have kind of oily skin, and I'm worried about staining on the white plastic on the new computer where my palms rest during use.
What's the best option for protecting this area? I've seen the Marware protection pack, but I've read quite a few bad reviews on it.
Any ideas?
Thanks!
Dave

I use Mareware's product on my WhiteBook and it is sold at the Apple Store and Apple online. It also comes with a keyboard cover cloth to put on when the Book is closed to protect the screen. The cloth doubles as a soft wipe for the screen. The palm rest is custom fitted for the palm area and is removable. I have removed it twice and stuck it back on. Here's a link: http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=A75 86758&nplm=TJ751LL/A

Can I begin service with $100.00 card good for one year and what are the usage terms?

Can I begin prepaid service with a $100.00 card good for one year and if so what are the usage terms?

Yes; phone is for Verizon PREPAID plans. Sri I did not state that correctly. I see that there are prepaid plans with monthly usage etc. I see some offers on line for a $100.00 card that's good for one year. Trying to determine if that is available from a Verizon store to begin a new plan. Checked with two different Verizon stores and got two opposite answers and neither was sure of the terms. Simply trying to get a low cost backup. Thank you for responding.

What's the best plugin for wide-angle / perspective correction

Hi guys,
I do a lot of location photography with a wide angle lens. When shooting upwards it sends the top of the building into the distance. My workflow has been to export to Photoshop for these and use the 'Transform' tools to add a little correction.
Do any of you use an aperture plugin for this and if so, would you recommend one to me?
Thanks for your help.
Richard

Well, unfortunately Flash was the universal format, and then Steve Jobs decided that he did not like Adobe. As most browsers on Earth were FLV playback enabled and if not, were only a quick, free download away. Now, it seems that Apple's devices will only work with flavors of MOV. One can still download and install Apple's QT Player (though several recent versions did not work well with Adobe programs - Steve Jobs sabotage?).
Instead of coming together on universal formats/CODEC's, it seems that many wish to fragment the market to support just their products. One is at the mercy of these hardware and software companies. Producers probably should now do several versions of everything, if they wish to cover all bases. Someone will have to download and install something.
Good luck,
Hunt

Best pratices for RMAN backup management for many databases

Dear all,
We have many 10g databases (>40) hosted on multiple Windows servers which are backup up using RMAN.
A year ago, all backup's were implemented through Windows Scheduled Tasks using some batch files.
We have been busy (re)implementing / migrating such backup in Grid Control.
I personally prefer to maintain the backup management in Grid Control, but a colleague wants now to go back to the batch files.
What i am looking for here, are advices in the management of RMAN backup for multiple databases: do you guys use Grid Control or any third-party backup management tool or even got your home-made solution?
One of the discussion topic is the work involved in case that the central backup location changes.
Well... any real-life advices on best practices / strategies for RMAN backup management for many databases will be appreciated!
Thanks,
Thierry

Hi Thierry,
Thierry H. wrote:
Thanks for your reaction.
So, i understand that Grid Control is for you not used to manage the backups, and as a consequence, you also have no 'direct' overview of the job schedules.
One of my concern is also to avoid that too many backups are started at the same time to avoid network / storage overload. Such overview is availble in Grid Control's Jobs screen.
And, based on your strategy, do you recreate a 'one-time' Oracle scheduled job for every backup, or do your scripts create an Oracle job with multiple schedule?
You're very welcome!
Well, Grid Control is not an option for us, since each customer is in a separate infrastructure, and with their own licensing. I have no real way (in difference to your situation) to have a centralized point of control, but that on the other hand mean that I don't have to consider network/storage congestion, like you have to.
The script is run from a "permanent" job within the dba-scheduler, created like this:
dbms_scheduler.create_job(
        job_name        => 'BACKUP',
        job_type        => 'EXECUTABLE',
        job_action      => '/home/oracle/scripts/rman_backup.sh',
        start_date      => trunc(sysdate)+1+7/48,
        repeat_interval => 'trunc(sysdate)+1+7/48',
        enabled         => true,
        auto_drop       => false,
        comments        => 'execute backup script at 03:30');and then the "master-script", determines which level to use, based on weekday from the OS. The actual job schedule (start date, run interval etc) is set together with the customer IT/IS dept, to avoid congestion on the backup resources.
I have no overview of the backup status, run times etc, but have made monitoring scripts that will alert me if/when a backup either fails, or runs for too long. This, in addition with scheduled disaster/recovery tests makes me sleep rather well at night.. ;-)
I realize that there (might be) better ways of doing backup scheduling in your environment, since my requirements are so completely different than yours, but I guess that we all face the same challenges in unifying the environments as much as possible, to minimize the amount of actual work we have to do. :-)
Good luck!
//Johan

CS 5.5.2 and still no GTX480 support for Mecury Engine?What are you guys smoking when supporting 470

Never buying a Adobe product again. I'm in supporting for death of Flash. This is gone too far. I'm pissed to the core with Adobe. I would rather have FCP do the job than this crap where i don't get support.

Meetajhu,
MPE with GPU acceleration does indeed speed up both renders and encoding (when exporting from Premiere Pro 5/5.5) by a factor of generally between 1.5 and 1.8. See the following thread to better understand what I mean by this:
http://forums.adobe.com/message/3459631?tstart=0
I just ran a test with all files on a single drive and to export 7.25 minutes of AVCHD to MPEG2-DVD (NTSC, progressive, wide, HQ) and comparing HW assisted vs. SW only I get:
w/ GTX 580 = 90% CPU + 54% GPU (takes 1:21)
software only = 98% CPU + 0% GPU (takes 2:00)
As you and others point out, when using MPE w/ GPU can speed up the time required for "Timeline Rendering" by up to a factor of infinity, but that can be useless if only doing a "render effects in timeline" (Enter key) is not enough rendering for your hardware to provide smooth playback from the timeline!
For example, if you have a timeline that show fully "red", as the AVCHD example above does on my PC, then PPro will force a partial render before it will even play back the clip (even though on my PC it plays flawlessly by simply pressing the spacebar). Then, when I shift over to "MPE with GPU accelaration" the whole timeline shows a yellow bar indicating that it is ready for playback without any rendering.
Finally, try to give PPro a chance; FCP had years of being at the top, but it is PPro's time now!
Regards,
Jim

What would be best colour for ipod touch 5, What would be best colour for ipod touch 5

What colour looks best in ipod touch 5g

Yeah I went with Black/Slate because if I get a Speck case or other protective case it will look way better! The colors with white fronts are all kind of ugly. Just my opinion not saying to buy black. I am not a fan of the white front anyway.

Best pratices for Wide Aperture lenses (what are ?)

Similar Messages

Maybe you are looking for