Best program to use for the Website?

I am interested in redesigning the home page of site: https://www.txid.org what would be the best program to use for the design?

Kim,
You should use design tools you're most comfortable with. Before engaging on design, you need to find out more on technology running the site being redesigned and see if there are existing design and HTML templates for that technology. If there are and you can minimally brand existing templates to quickly have professionally looking site, that would be the best way forward. Do not start with design only to figure out later that it be cost-prohibitive to execute, work your way from the ground up - server/site technology, existing HTML/WordPress/Drupal (etc) templates for that technology, branding options for those templates.

Similar Messages

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

Elements 7 - Best Preset to use for the Panasonic SDR-H40 Camcorder

Hi,
Can anyone tell me what would be the best preset to use for video created on the Panasonic SDR-H40? I'm just learning about the software, opened a project, using whatever settings were already there, and the video's audio sometimes stops mid-stream, so it's basically a silent movie.
I read that I might need to use a specific preset or create one of my own, but don't know how to actually go about it.
The choices under NTSC presets are AVCHD, DV or HDV. I've looked in the Camcorders manual and can't find how (or even if) that equates to the recording modes of XP (high picture quality), SP (normal) or LP (recording time prioritized) -
The videos I recorded were recorded in XP - Taking a guess at it, I don't think there's a relationship between these terms and the recording modes of the Camcorder and suspect that this camera only does DV. But if that's true I don't know if there are further adjustments I need to make (by creating a preset).
I was hoping that someone with the same camera or just solid general knowledge could shed some light on this.
Thanks!

The camcorder is a standard definintion camorder recording to a hard drive so you need to use the.... NTSC, "Hard disc, Flash Memory Camcorder", Standard 28KHz or Widescreen 48KHz dependant on whether you shot in widescreen.

What is the best program to use for making high quality gifs?

Right now I'm using gifbrewery to make gifs from youtube videos. I was just wondering, in your opinion, what's the best program or way to make the best quality gif possible? Thanks so much!

This is the Flash Player forum. You would have a much better chance to get a reply if you posted in the Creative Suites forum, and explain what kind of app you want to build.

What is the best disk cleanup program to use for my macbook pro?

what is the best disk cleanup program to use for my macbook pro? i've heard about MacKeeper but i dont want to risk downloading anything that might harm my computer. i just need excess files & such cleared and my computer harddrive cleaned up!

DO NOT USE MACKEEPER! If you feel you must have a "cleaner" try ONYX www.macupdate.com/app/mac/11582
https://discussions.apple.com/docs/DOC-3353
Credits to ds store.

What is the best program to use on Mac for editing, cropping photos from my computer. Looking for a free program that is good.

What is the best program to use on Mac for editing, cropping photos from my computer. Looking for a free program that is good.

If your needs are limited to those tasks then both Preview and iPhoto will fit the bill They are already on your Mac. There is a free download from Google called Picasa available here:
http://picasa.google.com/
It works much the in same manner as iPhoto. For some really heavy duty work there is GIMP available from SourceForge:
http://www.gimp.org/macintosh/ Also a free download.
Message was edited by: kennethfromtoronto

What is the best software to use for screen capture on a PC for use with FCPX?

What is the best software to use for screen capture on a PC (windows 7) for use with FCPX? I've tried Camtasia and camstudio however the avi files cannot be imported by FCPX and the mov files produced by these programs are shown as just black screens in FCPX.

I use to face this issue every now and then (as a freelancer) when I use to cut on FCP7.
if the material is DV and was captured using Sony VEGAS, Premiere or Edius, the footage generally worked fine. You'll find most people will tell you to convert it regardless, however I found no issues working with them.
A problem you'll definitely face is HDV material. Most PC editing software write HDV in their own codec, which can't be read in FCP.
The only thing I can think of is to try converting HDV meaterial to QuickTime using something like MPEG Streamclip, or something similar.
Good luck

What IS the best program to use to create an animation, that needs to be viewed in Powerpoint?

What IS the best program to use to create an animation, that needs to be viewed in powerpoint? Essentially i want to output a Movie File, so i'm guessing that Edge Animate is out of the question and it's not photoshop, more likely Flash?

So it sounds like you want to create a form. There are really two approaches, either Acrobat (AcroForm) or LiveCycle Designer (XFA form). LiveCycle Designer comes with Acrobat Pro, but it's an entirely separate application.
For an AcroForm, you'd create the underlying document in a page layout program (e.g., InDesign), word processor, or some other software and convert to PDF. Then in Acrobat you;d add the interactive form fields and any scripting you want. You can also add other types of interactive elements such as links, bookmarks, multimedia, etc. You can add a button which when clicked initiates an email with the filled-in form attached of submits to a web server.
For an XFA form, you'd normally create the entire document in LiveCycle Designer, particularly for a dynamic forms. There's a lot that PDF has to offer that's not available with XFA forms, but XFA forms can do things AcroForms can't. For a good discussion of the important differences between the two types of forms, see the following article: http://acrobatusers.com/blogs/thomp/so-what-difference-between-acroforms-and-xfa
For a form that needs to be saved with Adobe Reader, the document needs to be Reader-enabled. When such a document is opened in Reader, it will unlock certain functionality that Reader does not have otherwise, such as commenting, signing digital signature fields, and most important saving. But when a document has been extended this way with Acrobat, there are licesning restrictions. In short, if you distribute an enabled document to more than 500 recipients, you are allowed to use data from no more than 500 forms that have been returned to you, including hard copied. If fewer than 500 recipients, there is no such limit.

What is the best program to use to create an interactive pdf?

what is the best program to use to create an interactive pdf?

So it sounds like you want to create a form. There are really two approaches, either Acrobat (AcroForm) or LiveCycle Designer (XFA form). LiveCycle Designer comes with Acrobat Pro, but it's an entirely separate application.
For an AcroForm, you'd create the underlying document in a page layout program (e.g., InDesign), word processor, or some other software and convert to PDF. Then in Acrobat you;d add the interactive form fields and any scripting you want. You can also add other types of interactive elements such as links, bookmarks, multimedia, etc. You can add a button which when clicked initiates an email with the filled-in form attached of submits to a web server.
For an XFA form, you'd normally create the entire document in LiveCycle Designer, particularly for a dynamic forms. There's a lot that PDF has to offer that's not available with XFA forms, but XFA forms can do things AcroForms can't. For a good discussion of the important differences between the two types of forms, see the following article: http://acrobatusers.com/blogs/thomp/so-what-difference-between-acroforms-and-xfa
For a form that needs to be saved with Adobe Reader, the document needs to be Reader-enabled. When such a document is opened in Reader, it will unlock certain functionality that Reader does not have otherwise, such as commenting, signing digital signature fields, and most important saving. But when a document has been extended this way with Acrobat, there are licesning restrictions. In short, if you distribute an enabled document to more than 500 recipients, you are allowed to use data from no more than 500 forms that have been returned to you, including hard copied. If fewer than 500 recipients, there is no such limit.

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

Close ... before going for a specific Cisco app ... lets find out some details:
Host we need more details:
What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting).

What's the best flash to use for nighttime sports games?

What's the best flash to use for nighttime sporting events? I have a rebel XT and I'm pushing it to its limits trying to stop the action. I've tried a speedlite 430 but it didn't have a hook up for an external battery pack and I was told I'd need the extra power. Just tried the 580ex ll on Friday but at the 1/1 setting, it didn't flash for each frame in a burst, even with the external power. I should have backed it down to 1/4 but didn't know at the time. Any thought on a really good flash for night sports? Is the 580 a good choice?

JUst as Tim_S said. YOu will want a external battery pack. Unforatannly the 430 does not have the option to plug in a external battery pack so will want to pick up a 580 or one of the new 600 series.
Then you start looking at the battery packs. I recommend Quantum power packs
http://qtm.com/index.php/products/2012-05-17-18-18-59/turbos
5D III, 8-15L, TSE 24L, 24-105L, 85L, 70-200L, EX600 X2

Bookmarks are saved yet after using the page icon is still displayed instead of the actual icon for the website. I have followed the directions for "Favicons do not display".

My bookmarks, on a HP Pavilion dv-7-2273cl notebook, are saved yet the page icon is still displayed after using the bookmark instead of the actual icon for the website. I have followed the directions for "Favicons do not display" without any success. This problem is not experienced on my much older Gateway desktop.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_places-database-file

What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

tacbob wrote:
Are there any tutorials? I cannot find anything close.
http://itunes.apple.com/de/podcast/write-on-effects-in-motion/id287113664?i=4883 4057
The MacBreak Podcasts are an excellent source of info!
Have a look on the others ..

I have an IMac intel OS x 10.8.2, I would like to know what is the best program to use to make movies and burn them to a DVD???

What is the best program to use that will be compatable with a IMac intel OS x 10.8.2, that will allow me to make movies, add music then burn it to a DVD. The program I have now, will make the movie but will not burn it???

You want iDVD.
Purchase iLife 11 (includes iDVD) on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
http://dealmac.com/lw/artclick.html?1,527850,1872219
Yes, there are programs that will put a movie on a DVD. I have tried most of the other substitutes including Toast, Burn, DVD Creator, Wondershare, and others. None of them come anywhere near the ease-of-use and power of iDVD.

Can we know buffers used for a particular program?(not for the instance)

Can we know buffers used for a particular program?(not for the instance)

You can do a runtime trace using ST01 but you won´t find out how much buffer a program "uses" since the buffer is shared for all workprocesses.
Markus

Best program to use for the Website?

Similar Messages

Maybe you are looking for