Best quality export to DVD Studio Pro for HD

Sorry if this has been resolved before but I am totally confused.
I am using FCP with a Sony HVR-Z1E. I aim to make the highest quality clips on my dvds prefering to have many short high quality dvds than having fewer long low quality ones. I would be very grateful if someone would sujest the best setting for this or to create a new one.
Thanks for any help
Regards Alf

Compressor has some presets for making high quality DVDs, I'd start with those. Take a short sample of your footage that you feel best represents the visual quality of the piece, and start testing different configurations. There is no one magical setting that is going to work for everyone. You'll also probably reach a point where you really can't tell the difference between one high bitrate and another higher bitrate. This can be a good indication that you've found the best quality option.
Using CBR encoding will give you the highest, consistent quality, but larger filesizes. Using VBR will maximise your quality to filesize ratio.
Do be aware that DVDs do have a bitrate limit of 9000 Kb/s. This includes both your audio and video. If you're audio and video bit rates add up to a sum greating than 9000 Kb/s, DVD SP will throw a weird error when you try to build your project.

Similar Messages

Exporting to dvd studio pro

What is the best way to export sequences to DVD Studio Pro for output to DVD Video (PAL), just for television viewing? Currently using quicktime movie, but are finding artifacts on both menus and footage. Pixel type flashs, not always in the same places (seems to alter each time I do a new build).
I have been told to experiment with Compressor, but there are so many options where do I begin? Also how does the sound work with Compressor, whats the best sound file to use, does it matter?
I'm using FCStudio5 (upgraded recently from FCPHD4.5. Everything used to work fine on old version, now seem to have continual problems.

The best way to export to DVD Studio Pro is using Compressor - it's also the fastest way!
If your footage orriginated in NTSC, export it directly to PAL. It will take a little longer as PAL (720 x 576 @ 25 fps) has higher resolution than NTSC.
It doesn't really matter what sound setting you use, as long as it is 192 Mbit/s or higher.
Then create a DVD Studio Pro using the PAL settings and bear in mind that the picture frame (including menus) is 720 x 576.
If you regularly send/sell matherial to Europe, it's much better to shoot it in PAL!

BEST HD QUALITY SETTINGS IN COMPRESSOR TO EXPORT TO DVD STUDIO PRO

I shot in HD, and edited with FCP. I am now trying to use compressor to make a DVD, but first I am trying to figure out what settings I should use in compressor to get the best quality for my DVD?? I wil be completing the DVD process in DVD studio pro.... Thank you!

Unless you have HD-DVD media and an HD-DVD burner, you are doing an SD DVD. As in, what most DVDs are these days (Blu-Ray and HD-DVD still being quite cost prohibitive on the user end). If you have standard 4.7GB DVD-R or DVD+R this is SD DVD.
As far as settings, depending on how many audio tracks you have and what format they are, I would take one of the two-pass MPEG-2 settings (e.g. MPEG-2 Best Quality 90 Minutes) in compressor, go to the Encoder pane -> Quality tab and raise the Average/Max bitrates. Set Motion Estimation to Best.
Keep in mind you want all your bandwidth usage (audio, video, subtitles, etc) to go no higher than ~9.5Mbps lest you run the risk of players choking.
If your HD source is real clean, even at the default 6.2 Mbps you should get great quality, but some extra bits in there will give more room to avoid artifacts...
Hope that helps.

Export 16x9 Anamorphic for DVD Studio Pro for TV

My movie is 16x9 Anamorphic DV on a 3:2 Anamorphic timeline... I want to export the movie in the highest possible quality for a DVD made in DVD Studio Pro. This DVD is for view on TV.
What is the best way to do this? Meaning the way most indie filmmakers would do it for a festival DVD?
Thanks

what is the exact audio option that I should be selecting in compressor? I do not see ac3? Closest is AAC 128kbps. Where are the correct audio options located in compressor? They are not under DVD 90 Folder... Thanks

Best setting on DVD studio pro for PNG vid from final cut w/1280x720 res

Okay, so I am trying to find the way to make my video look best on a 720p tv set. The video is for kiosk use, so will only show on this one tv over and over. I want the text to look super crisp and sharp, so I have exported the video from final cut studio as a png with 1280 x 720 HD resolution. When I import it as an asset on DVD studio pro I notice that the resolution in the track menu is showing as 720x480i. What's the best way for me to setup DVD studio pro, so my video retains as much clarity and sharpness as possible? Is there no way to make it super sharp on an SD DVD? I set the encoding to Two pass VBR and the bit rate to 6.8 and max bit rate to 8.0, motion estimation to best... any tips would be highly appreciated. Thanks.

I want the text to look super crisp and sharp
then use a computer and presentation software, Powerpoint, Keynote Open Office Impress which is FREE
1280 x 1024 rez is a basic standard these days
http://www.apple.com/iwork/keynote/
http://www.openoffice.org/product/impress.html
I have exported the video from final cut studio as a png with 1280 x 720 HD resolution.
this is waste of time, your next step is compressing this image down to something like a tenth of its original size with much lower rez to an MPEG2
if you want acceptable results at video rez 720x576 PAL then use DVDSP
but you have to accept that creating a DVD severely compresses the video to MPEG2, which is fine for moving video but isnt the sharpest compared to computer rez.

Compression quality: iDVD vs DVD Studio Pro vs others?

I am merrily editing along in FCE, and looking to eventually compress and burn onto DVD. Since I can use all the quality I can get, and don't have spare money (so what else is new?), I am wondering about the differences in compressing software. Is there a visible difference in the final product using DVD Studio Pro vs iDVD? Is there something else out there that is better than iDVD but doesn't cost as much as DVDSP? Any opinions or experience welcomed!
Thank you!

If your project is under an hour, iDVD will give you very satisfactory results (use the Best Performance settings).
You can create an up to 2 hour movie with iDVD but personally (with Best Quality), I think the quality begins to slide off a bit over an hour
DVD Studio Pro, with Compressor, gives you many more compression options. Compressor has lots more compression pre-sets and you can go in and tweak bit rates, single or double passes, etc. You can do that inside DVD Studio Pro as well. Overall, Studio Pro just gives you a lot more options and control.
Roxio Toast is a relatively cheap (around 80 bucks Cdn) piece of software that will compress your FC movies. You are way limited in terms of things like menus and chapters but compression wise it does a fairly nice job ... again, you don't have the versatility of iDVD. With Popcorn, it will allow you to cram a big movie onto a single layer DVD but the quality begins to hurt
Personally, no matter what you use, two hours is the reasonable quality limit for a single layer DVD

Best Quality Export From Final Cut Pro Into After Effects?

So I converted all my footage into Apple Pro Res 422 (24 p, 1280 x 720) for use in FCP and want to export edited parts into After Effects. What is the best quality export to bring into After Effects and also export from After Effects back into FCP?

zikade wrote:
Depending on your storage and what you're up to with your footage I'd recommend uncompressed. Large files but you won't loose any quality. Animation is also lossless if you want to compress your footage. If your drives are not fast enough, go for ProRes HQ from FCP to AE, and Animation the way back...
Since you've converted to 422, stick with that. You cannot gain anything by exporting from FCP to a codec that has a higher bandwidth such as PRHQ or Animation. You just don't want to go down.
Rendering out of After Effects going back to FCP jsut use the same base codec. Again, you will gain nothing by using a higher quality codec. However, you may want to use PR4444 or even Animation if you must have an alpha channel. PR4444 uses trillions of colors and you will get an interesting warning when you try to render to it. You can dismiss the warning.
PR4444 has the distinct advantage of being realtime in FCP7 and X. Animation requires rendering back in teh FCP timeline.
bogiesan

Slideshow Export to DVD Studio Pro

Is there a way in Aperture to export a slideshow that displays the file name at the bottom of an image so that it can be imported into DVD Studio Pro to be made into a chapter on a DVD?
I really need to do this! HELP!!!!
Kevin Hawkins

First, export the shots you want to use.
From there you can import directly to dvd studio pro and title them as a dvd slide show if you like. You can also do this with idvd.
The dvd slide show format is limited to 99 shots, though and has some other limitations, (transitions), as well. You can break these by turning the shots into a movie, using something like imovie or final cut pro. Both also support titling.
There are several stand alone programs for doing this too, including photo2movie, and still life, both of which have relatively low price tags.
Search the dvdsp or fcp forms for more on this. Also search for "ken burns effect", which you may want to consider if you do this much.

Pixelated, low quality text in DVD Studio Pro

Is it normal for the text in DVD studio pro to be pixelated and low-quality once you burn a project and enter full screen mode (is this because it is not vector-based)? Is there a *better definition/resolution setting* without going into HD which is not compatible with all machines? how can you get better quality line definition?
and most importantly..can you apply this setting to the project once it has been created?
thank you for your help

buttons are have jagged edges and are little play triangles, just the standard shape for play...
..I spoke to someone today who said ts pretty impossible to get defined edges unless you have a super-expensive post production suite...right?..and something to do with anti-aliasing
any way round this 'jagged edge' issue or is it actually the program has this 'poor resolution'in accordance with you mac capabilities?
p.s. sorry about my language...as you guessed Im pretty computer-lingo-illiterate...so please answer plainly if you can...thank you ever so much...I think we might be getting somewhere...or at least to a point

Poor quality text in DVD Studio Pro

Hi there,
I'm using DVD Studio Pro. I create menus in Photoshop and export flattened .psd files.
I work in PAL. This problem is worse in 16x9 (anamorphic).
I create the menus at the true original res of 1024x576. When the menus are imported into DVD Studio Pro the text becomes jagged and pixelated. I understand that non-square pixels are causing this, but I don't know of a solution.
What is the best way to bring menus and text into DVD Studio Pro?
I have searched a lot and noone has a great solution.
Thanks heaps,
Mike

You may find that Photoshop does a better job of resampling down to your SD PAL resolution. When DVDSP resamples down from your 1024x576 file, you are at the mercy of the hardware or software rendering in DVDSP, depending on your DVDSP prefs. Ideally, I'd work in Photoshop at 720x576, and use the pixel aspect ratio correction to correct the preview aspect ratio in Photoshop.

FCP Export to DVD Studio Pro

I am trying to export a QT movie file from FCP to DVD Studio Pro, but once it is in DVDSP, the file is too large to fit on a dual-layer DVD-R. Not to mention there are other files that need to be on that same DVD.
I was told to always export it with CURRENT SETTINGS ..... but when I do, they are over 10GBs in DVD Studio Pro.
Do I have to re-edit my movie to make it shorter? Its only a 45min HD Video. Or is there a setting I am missing here?
Please help! Thanks so much.

Yes, export with current settings. But you're leaving out the crucial step, which is creating the mpeg file that dvdsp needs. You can either make it in compressor or let dvdsp do it in the background while you author your menus etc. It's the same engine either way. But having dvdsp do it, while in one way simpler-- the controls need a lot more drilling down to find. Sorry if that's a convoluted sentence. Too many jelly beans.

How to export to dvd studio pro

I have a saved final cut pro project but i cant drag it into dvd studio pro.
says incompatible format. This method works file in i movie
help

Just by reading the info provided in the original post, I'm assuming that they're trying to drag the fcp project file into dvdsp. The main thing to understand here is that iMovie and FCP are two completely different programs which work completely different. Final Cut PRO is exactly that, a professional editing application, where iMovie is a consumer level editing app. In order to really understand how FCP works is to read through the manuals.
As for the proper workflows for DVD authoring, I'd recommend this site:
http://dvdstepbystep.com

Film Export problem - DVD Studio Pro 4!

I have a problem when exporting my dvd as .img file.
The protokoll says (in german): Achtung: Die Datei „NAME-MPEG-2; 6,4 MBit/s; 2-Pass; 4/3.m2v“ im VIDEO_TS- oder HVDVD_TS-Ordner ist auf der fertiggestellten DVD nicht enthalten.
means the original file is not included. what can i do?
In my dvd studio pro document all data is imported and green light.
Need help!

It is probably a standard warning message to say that the file is not included in the video_ts folder - which is quite alright... you don't want that in there. When the video_ts folder is created it should only contain .vob, .bup and .ifo files. Anything else is technically 'illegal' to be contained there, and will be omitted.
Does your burn complete? Can you play the disc?

Exporting to DVD Studio PRo from FCP5 .... Can't find answer anywhere..

Sorry guys, but I have read about 2 hours worth of posts without any answers to my question that is driving me insane. My eyes are bleeding and I am tired of experimenting having to wait hours for exporting to finish just to find out it isn't good quality or not acceptable in DVDSP.
Here is my deal and hopefully someone can help me resolve my issue.
I shot in 24p HDV and edited in FCP5. Finishes project and now want to burn on DVD for friends and family =) End project is about 18 minutes long 720p
Tried using QuickTime Movie export and "current settings" and the file ended up being like 370mb, which seems REALLY small, so I am not sure how to change "current settings," since I am convinced those settings are not the best quality.
I then tried DCHDV PRO 24F in the alternate settings and I ended up with a 5.6gb file, which looked beautiful but too large for a DVD. I tried using compressor to make it smaller using m2v conversation but DVSP refuses the file. I would love to use a QuickTime Movie export that can get the file around 4gb and keep the GREAT quality and still be accepted in DVSP.
So what I really need from someone out there is:
What the best settings for exporting a 18 min HDV 24p movie from FCP5 to DVDSP losing the least amount of quality as possible?
Poor quality to me is flickering credits, poor colors etc.

I believe you have the fundamental misunderstanding of what is happening in this process.
When you create a DVD, all video material - without regard to original format - is converted to a highly compressed MPEG2 format and the audio to either an aiff or ac3 format. The video and audio files are then mixed (muxed) together into a series of VOB files. The major controllers of final quality are: original footage quality, compression bitrate and the amount of motion within frames. The overall length has an impact on bitrate as the DVD spec was designed for a 2 hr limit. HDV presents it's own problems as the 15 frame GOP format is not simply converted to the SD NTSC format.
You may want to spend time to understand how the mpeg2 compression works so you can make suitable adjustments if the result is unacceptable. It is a bit of a dark art but controllable to some extent.
The easy setups available in DVDSP are a good place to start and each parameter within the compression process is adjustable.
good luck.
x

Apple Pro RES and DVD Studio Pro for burning DVDS

I have a FCP file, shot in HD, 5.5 min long, in apple pro res. It needs to be in a format to send to various people to play on a commercial DVD player as well on apple and pc computers. So far I have made a H264, as well as a MPEG 2 on a "-" dvd and both will play only on my mac computer, not on a playstation 3, nor a pc, nor a commercial DVD player. What should I do?

so sorry I sounded curt....must be the heat.
I have zero experience. Someone was helping me compress my final cut pro movie which was apple pro res, then , in compressor we tried H.264, then MPEG 2, using "-", but neither of these would play on anything other than my mac.
I need them to be in a format that I can send to people who may be using a pc, mac or commericial DVD player.
It's very nice of you to reply....

Best quality export to DVD Studio Pro for HD

Similar Messages

Maybe you are looking for