Best quality setting for Airtunes

H Folks..just started using my airport express to play the stereo. Are any setting preferable for best quality? ie does the multicast rate affect quality?
Is the Monster cable going from the Airport Express to the stereo via RCA jacks the best way to connect the devices?
th you!
Chip

ie does the multicast rate affect quality?
Not really. The multicast rate defines the bottom limit of the wireless data rate allowable before the wireless connection is discontinued. If you set this higher, you will cause disconnects if the signal is low. One way to think of this is that a higher multicast rate will decrease the usable range since you have to be closer to the base station to get a high data rate.

Similar Messages

Best Quality setting for iPad Playback

Hello,
Just wondering if there is a recommended setting (1024-by-768) H.264 at ? bitrate for the new iPad?
Assuming the source video is HD either 720p or 1080p at 30fps.
thanks
dan

ie does the multicast rate affect quality?
Not really. The multicast rate defines the bottom limit of the wireless data rate allowable before the wireless connection is discontinued. If you set this higher, you will cause disconnects if the signal is low. One way to think of this is that a higher multicast rate will decrease the usable range since you have to be closer to the base station to get a high data rate.

Best (quality) Setting for Importing Footage

Hi,
could anyone confirm which setting would be best to choose when importing footage from a DV camcorder? (i.e. to retain maximum quality);
DV or 1080i etc. etc.

Hi
I'm in the UK so PAL is the format used (although the footage was taken in America).
Not really the issue. Was Your material recorded on an American Camera (NTSC) or
a Camera bought in EU (PAL)
One can convert from one to the other by setting PAL/NTSC in iDVD at least - BUT THE QUALITY
will be Very BAD !
(I don't think iMovie will import from other format - at least my SONY TRV-900e (PAL) can
playback NTSC - BUT not via FireWire to be imported into iMovie)
(There is a need of a NTSC Camera to be able to get it into iMovie)
• Import in the format material was recorded
• Use JES_Deinterlacer to convcert (free program on the net)
• Start a new project in the new format and import the conveted material
As good as it can be - Pro applications exists to an astronomical cost and near
not visibly quality enhancement.
Yours Bengt W

What is the best Compressor setting for best quality video playback on an iBook g4?

I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
Any suggestions are greatly appreciated! Thanks!

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

What is the best compressor setting for dvds

What is the best compressor setting for dvds that is not for HD dvd players? I used "DVD Best quality 90 min" and changed the GOP setting to 7.5 and my dvd looks terrible. the text is blurry and the colors are bad.

correction the bit rate is 7.5

What's the best quality export for a 720 X 480 size, 24fps mp4 file?

Whats the best quality export for a 720 X 480 size, 24fps mp4 file?
This movie trailer will be sent to a distributer overseas.
The export I been resorting to lately is MPEG 2 DV High Quality as oppose to anything HDTV because it just shrinks the picture, obviously lol
Do I have anymore options besides Mpeg 2: NTSC DV High Quality?

Lagarith is a codec that you install separately. A very brief Search would have given you that info.
You can access the Lagarith option (once installed) using the Microsoft AVI format, and selecting Lagarith under Video Codec in the Video tab.

I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?

I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?

I've looked at that, but on my PC, "look for remote speakers connected with airtunes" isn't an option.
The only options I get are "prevent ipods [etc] from syncing automatically" , "warn me when [X %] of the data on this computer will be changed" and "forget all remotes". Its also got a list of backups I have saved, as well as a button to reset sync history.
When I am playing a song, the "airplay" button isn't even visible.
I am sure that the apple tv setting is on as well. Is there anything else you can help me with?

'Maximum' Quality Setting for Previews

Dear Adobe,
Aside from 'Low', 'Medium', and 'High' settings for standard-size previews, please add a 'Maximum' quality setting (equivalent to 10-12 quality setting for JPEGs in Photoshop).
As standard previews are generated for imported images or for new edits on images already in Lightroom, sometimes low quality JPEG previews are generated. These previews exhibit color banding & macroblocking artifacts typical of JPEG files (especially in dark areas). Since these previews are used in the Library, Slideshow, Print, and Web modules, it's pretty darn annoying & distracting to stare at low-quality renditions of our images. Switch to Develop module, and a fresh new image is rendered on screen; therefore, these JPEG preview artifacts are not visible in the 'Develop' module.
Two fixes to this problem:
1.) Add a 'Maximum' quality setting for previews that Lightroom generates
2.) Fix it the Aperture, Bridge, iPhoto, 'every-other-software', and your own 'Develop' module way: display the precached preview first, while rending a fresh view of the image in the background... display that when it's ready.
Here's a forum where I've discussed this previously:
http://www.adobeforums.com/cgi-bin/webx?128@@.3bc33a73
Here are examples of the low-quality previews generated by Lightroom (when 1680 'High' setting is used for previews):
http://web.mac.com/rishisanyal/iWeb/Homepage/Macroblocking.jpg
http://web.mac.com/rishisanyal/iWeb/Homepage/Library.jpg
http://web.mac.com/rishisanyal/iWeb/Homepage/Library_vs_Develop.jpg
And if you are using a well calibrated monitor, then look at the macroblocking in the black wool coat in this image (please use a color managed viewer, else the coat will just look black and you won't see the blocking):
http://web.mac.com/rishisanyal/iWeb/Homepage/Lightroom_JPEGblocking.jpg
We photographers have discerning eyes. It's painful to see this terrible renditions of our precious images... and to have to switch over to the 'Develop' module *just* to get a high-quality rendition of our image? And meanwhile watch slideshows with low-quality versions (previews) of our images?
Sounds pretty unacceptable to me.

So, I'm pretty much convinced now that the problem with low-quality LR previews seems to be mostly isolated to the previews that LR generates after you make edits in the 'Develop' module.
Upon first import, this image looked fine in the 'Library' & 'Slideshow' modules. After making some edits (color, tone, etc.) in the 'Develop' module, I ended up getting this hideous preview in the 'Library' & 'Slideshow' modules:
http://web.mac.com/rishisanyal/Lightroom/07-0310_BandingBlocking.jpg
You people with LCDs will be able to see the JPEG artifacts better than those with CRTs, since LCDs tend to be sharper.
So, the obvious question is this:
Does LR, when *re-generating* previews for edited images, ignore the quality-setting for JPEG previews (which I have set to 'high')??

What is the best export setting for video on blogger

What is the best export setting for video from premeire to blogger.com or blogspot.com

I have not been able to find the technical limits/specs for the site Blogger or blogspot.com. That is why I made the post here thinking some Adobe users may have experimented already and come up with good export settings for AVI DV video to a format optimized for Blogger.

Best quality .AVI for PC viewing

How can i export with best quality AVI for PC viewing. HAS to be AVI. I use the expert settings with keyframe of 10 and 100 kb/sec max, and it is very "blocky".. How to improve the quality.

i created a login just to reply to you cuz i was trying to do the same. i found the answer on: http://www.humnet.ucla.edu/itc/resources/powerpointav/pptvideo.pdf
basically, use "expert settings" "movie to AVI" "options" "settings" "cinepak" "millions of colors" "high" "30 fps" "key frame every 300 frames" "limit data to 400kbytes/sec"
following the above instruction, i was able to export a movie to a decent size avi file that plays on wmp on a pc. (i didn't use sound cuz i didn't have any but there is instruction for sound on the pdf file)
i use a mac but have to create videos that can be viewed on any computer and can be used on a powerpoint presentation. i was so happy when i found a way to make good quality (actually i used "best" rather than "high" under quality), not choppy video for pc and mac viewing.
hope this helps!

MOVED: Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

This topic has been moved to AMD64 nVidia Based board.
Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

If you want SSE3 support and you do not overclock, Bios 1.4 is the only one officially available (1.41beta is not official).
Try to upgrade to 1.4 and see it for yourself, do the upgrade with floppy in DOS so that you can save your old Bios.
I would rather wait till mid June when a less troublesome new bios is suppose to be availabe for NEO4 MBs.

Best export setting for HD Video

I am currently woriking with Final Cut Express HD and I am new to the whole HD experience. I would like to know what is the best exporting setting for FCE to be copied on DVD and viewed. I am currently working on a wedding project with a JVC Pro HD camera GY-HD110 720p. Any help will be appreciated. Thank You.

This is a question better asked in the FCE forum located at the link below:
http://discussions.apple.com/forum.jspa?forumID=936

What is best network setting for jetpack mifi 5510l

I live in a rural area with poor signal. No 4G and limited 3G. We got an antenna that boosts phones from nothing or 1X one bar to 3G and 2-3 bars inside the house. What is the best network setting for jetpack? It doesn't seem to work as well.
Automatic and 4g don't work. I don't know what CDMA Auto or EDVO stand for.
Any suggestions for improving strength would be appreciated. I know I won't get a great connection but a steady connection sure would be great.

> What is the best network setting for jetpack?
Not sure what you mean. The jetpack will automatically configure itself to whatever signal it currently has access to. Shouldn't have to configure any network settings.
> I don't know what CDMA Auto or EDVO stand for.
Those are the old 3G networks.
> Any suggestions for improving strength would be appreciated.
Perform what is known as a Site Survey and evaluate your current environment:
http://3gstore.com/page/13_will_an_antenna_help_me.html
After you generate some numbers then look up what they mean in the Interpret the Results tab. You mentioned that you already purchased an antenna so there may not be anything else you can do as the local towers in your area are not good enough to reach inside your home.

Lightroom Export Quality setting for best Muse slideshow optimization

Hi,
I am using Lightroom to prepare images that I will use in Muse slideshows--basic slideshow widget. In LR, I have cropped virtual copies of everything to the exact proportion I need in Muse. In the LR Export dialog, I use the Image Sizing dialog to set to my exact pixel dimensions for the images--784x560px, 72ppi. That's for my desktop version, but I'm using the same images for my tablet and phone versions. In the LR Export > File Setting dialog, I set JPG, sRGB.
My question is this: What is the optimal QUALITY setting in the LR Export > File Settings dialog to produce the smallest file size and maintain excellent image quality in Muse webpages? The QUALITY slider goes from 0 to 100. Furthermore, since my tablet and phone slideshows are smaller than the desktop slideshow, would I be wise to produce another set of images in LR for each of the three formats, sized for the respective formats?
Note that I am not using the HiDPI setting in Muse Site Properties > Content.
Thank you for any help here.
John

Please check these links for details :
http://tv.adobe.com/watch/learn-creative-cloud-for-photography/upload-a-lightroom-web-gall ery-to-business-catalyst-using-muse/
https://forums.adobe.com/thread/1726663
Thanks,
Sanjit

Is there a best rip setting for multiple devices?

I want to start converting my DVD library to computer files so I can import into iTunes and then access it anywhere. I bought a program called Wondershare Video Converter Ultimate Mac which offers a TON of settings choices. I did this with all my CDs years ago but it was easy. I set everything at 192 MP3 and can listen on anything. But for video it seems more complicated. So for devices where I might watch, I have:
iPhone4
iPad orginal,
AppleTV 2 and
Samsung 55" LED TV through home theater
BTW, I'm using a Mac Pro, 8 GBs RAM and lots of drives space, running OSX 10.6.8, but will be migrating to Lion and iCloud later this week.
In reading Wondershare's many output settings choices, I'm wondering if I need to output multiple file versions like:
MP4 for my iPad or iPhone
M4V for my AppleTV and ultimately my 55" TV
And then there's the question of resolution. The default for either their MP4 or M4V is: 1280 x 720
Is that high enough quality if I WiFi stream from iTunes > AppleTV > 55" TV? Or do I need to set the resolution to Wondershare's highest setting: 1920 x 1080 for best quality. And if the answer is yes, go higher, if I want to watch on my iPad or even iPhone, how will 1920 x 1080 work out? Does the device downsize or something and able to play a larger resolution file?
So given the range of devices that I might watch, is it possible to create one output file based on one "one size fits all" type setting that will work on all my potential applications/devices?
Can AppleTV handle MP4 files even though Wondershare specifies M4V if you choose their setting AppleTV for your output device and visa versa with M4V for iPads and iPhones?
Lastly, I have no clue what the settings are in my original DVDs. Maybe I can see this in Wondershare. I'll look. But if the original is 1280x720 and I set my rip resolution to 1920x1080 will I end up with less quality because I'm converting upward from the resolution of the original?
If my large screen TV requires 1920 x 1080 for best quality and I'm playing a video that is 1280 x 720 on it, then I assume the TV resamples it (is that the word?) and upscales it to whatever resolution it runs at? If so, where is the best place to create the higher/larger resolution? At the rip stage or in viewing stage on the fly done by the TV?
So much to learn.... I hate being a newbee. but hopefully this will be a helpful thread for others in the same boat as we all look toward digitizing our lives
Thanks,
Steven

I want to start converting my DVD library to computer files so I can import into iTunes and then access it anywhere. I bought a program called Wondershare Video Converter Ultimate Mac which offers a TON of settings choices. I did this with all my CDs years ago but it was easy. I set everything at 192 MP3 and can listen on anything. But for video it seems more complicated. So for devices where I might watch, I have:
iPhone4
iPad orginal,
AppleTV 2 and
Samsung 55" LED TV through home theater
BTW, I'm using a Mac Pro, 8 GBs RAM and lots of drives space, running OSX 10.6.8, but will be migrating to Lion and iCloud later this week.
In reading Wondershare's many output settings choices, I'm wondering if I need to output multiple file versions like:
MP4 for my iPad or iPhone
M4V for my AppleTV and ultimately my 55" TV
And then there's the question of resolution. The default for either their MP4 or M4V is: 1280 x 720
Is that high enough quality if I WiFi stream from iTunes > AppleTV > 55" TV? Or do I need to set the resolution to Wondershare's highest setting: 1920 x 1080 for best quality. And if the answer is yes, go higher, if I want to watch on my iPad or even iPhone, how will 1920 x 1080 work out? Does the device downsize or something and able to play a larger resolution file?
So given the range of devices that I might watch, is it possible to create one output file based on one "one size fits all" type setting that will work on all my potential applications/devices?
Can AppleTV handle MP4 files even though Wondershare specifies M4V if you choose their setting AppleTV for your output device and visa versa with M4V for iPads and iPhones?
Lastly, I have no clue what the settings are in my original DVDs. Maybe I can see this in Wondershare. I'll look. But if the original is 1280x720 and I set my rip resolution to 1920x1080 will I end up with less quality because I'm converting upward from the resolution of the original?
If my large screen TV requires 1920 x 1080 for best quality and I'm playing a video that is 1280 x 720 on it, then I assume the TV resamples it (is that the word?) and upscales it to whatever resolution it runs at? If so, where is the best place to create the higher/larger resolution? At the rip stage or in viewing stage on the fly done by the TV?
So much to learn.... I hate being a newbee. but hopefully this will be a helpful thread for others in the same boat as we all look toward digitizing our lives
Thanks,
Steven

Best quality setting for Airtunes

Similar Messages

Maybe you are looking for