Best quality to burn a dvd for duplication

Looking for the best way to get the best quality burning a dvd for duplication for resale.
I have iLife09. Its about a 33min video shot with a mini HDdv

Hi
My list on DVD Quality.
*DVD quality*
1. iDVD 08 & 09 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
2. From
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
This can also be done with (Apple) Disk Util tool.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
Yours Bengt W

Similar Messages

Since iDvd is no longer supplied with Lion, what is best to use to burn to dvd for TV?

Since iDvd is no longer supplied with Lion, what is the best product to use to burn to dvd for TV from iMac? Is there a free solution?

Thank you very much for the link. I'm in the process of evaluating the trial version of a couple of products other than iDvd. Since iDvd does not have a trial, I was wondering if you could answer a couple of questions. Once I'm done, I plan on putting up the resluts of what I've found. Work is very busy this week, so I probably won't get a chance to work on this much until next week.
Anyway, I'm importing movies from my Sony Handycam DCR-TRV20. I've used iMovie to perform the download from the camcorder (the other products don't support this). The other products can work directly on the imported .dv files without having to export things from iMovie as a .mov file. I have not had time to see if there is a quality difference between a burned DVD with .dv clips vs. .mov imported from iMovie. So my questions regarding iDvd are as follows:
Can iDvd work directly on .dv files, or do you need to import .mov from iMovie?
If iDvd can work with these files directly, is it easy to do things such as clip them and do affects on them?
Is there a quality difference when viewing a burned DVD if .dv files were used vs. imported .mov files?
Since I have later versions of the iLife products than what comes packaged in the iLife that contains iDvd, can you install only iDvd in what is purchased from Amazon?
Thank you very much is you know the answer to any of these questions.

Does anyone experienced bad quality when burning a DVD?

Does anyone experienced bad quality when burning a DVD?
Using OS 10.6.8 and Magiv Video in iDVD, I am having a hard time creating a decent DVD. The videos per se are fine, but the intro menu and menu text and images are extremely poor quality and hard to read. What is going on?

Hi my notes on this - might be of help
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser and as Large (NOT HD or other resolutiona as result will suffer) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Best way to burn a DVD+R DL disc?

I was wondering what everyone thought was the best way to burn a DVD+R DL disc.
This is how i do it and let me know if you have better results doing it a different way.
1. Never burn from DVD SP, always use Toast instead.
2. Select All Regions (including #7) in DVD SP
3. Build/Format, then select Harddrive, .img file
4. Use Toast and select Copy, then Image File.
1. I never burn in DVD SP because it uses the fastest write speed that your disc/burner does and this seems to have issues.
2&3. I always select All Region because DVD SP by default doesn't select #7 (no clue to why that is) and if you got to harddrive using .img, then that is CMF format and CMF needs all region (RCM Value of 0). Otherwise DVD SP will have different region codes in the MAIN.DAT vs. the CONTROL.DAT. 0 and possibly 64 or 40.
4. With Toast you can set the write speed. I just use 2X and this takes 40 minutes or so for a full DVD+R DL disc.
But..
Is this the best way?
Or is the DVD-ROM (UDF) option a better way?
Any suggestions?

Hi Brian,
Not that this really helps you solve the dvdsp thing but if they are regular clients maybe buy a cheap(ish) dvd player that plays your discs fine and send them it. Explain the ±DL issues. Say the authoring is fine but the ±DL media thing is a mine field so here is a player so proofing goes smoother in the future.
If Toast is working better then send a media input form with the proof stating where the LB will be on the master etc.
I'd like to hear anything anyone else has to say but I'm sure we're aware of most of the options already.
FWIW, if you're running 10.4.x you can type drutil info in Terminal and hit enter to see what types of media the attached drives can burn,
Good luck,
-Jake

IMovie '08 option to make the best quality video on a DVD using iDVD '08

Which iMovie '08 option will make the best quality video on a DVD using iDVD '08?
1. Share-Media Browser-Large-Publish
2. Share-Export Using Quicktime
3. Or can you use an unpublished iMove in iDVD?
(Of course I'll have to first get iDVD to open without crashing...)

Which iMovie '08 option will make the best quality video on a DVD using iDVD '08?
1. Share-Media Browser-Large-Publish
2. Share-Export Using Quicktime
3. Or can you use an unpublished iMove in iDVD?
As always, this depends on a number of factors which you failed to cover in your original question.
1) If you source files are SD, other than an increased loss of time in converting you gain nothing in scaling the files up in iMovie '08 only to scale them back down in iDVD. On the other hand, if your source files are HD, then you will likely see a marginal increase in quality which may or may not be worth the price of increased processing time. In this latter case, you are allowing the MPEG-2 compressor to get the most it can out of your file at the P- and B-frame level.
2) Export using QT allows you to customize your output with regard to both compression format and settings. For instance, you can use a codec with extremely high data rate (e.g., VGA dimensions with DV at 28.5-57.0 Mpbs, AIC at 18.0-22.0 Mbps, or even unlimited H.264/AAC at 16.0-20.0 Mbps). High video data rates generally translate to less lost quality during the re-compression process. Thus, if the intermediate file produced by iMovie '08 and passed on to iDVD retains more of its original quality, the MPEG-2 compressor can get more quality out of the final conversion as stated above.
3) Since no physical file actually exists until the project (simply a set of instructions detailing how the final file will be created) is published, there is nothing to be physically sent to iDVD. basically you must create a physical file from the project in order to do anything at all whether sending it to a gallery, iTunes, YouTube, iDVD, etc.

Is it better to export an iMovie project as QT and use Toast to burn a DVD for general use or to export to iDVD and burn VD from there? Why?

Is it better to export an iMovie project as QT and use Toast to burn a DVD for general use - or to export iMovie project to iDVD and burn DVD from there? Why?

Toast probably maintains better quality if you are just doing simple conversion direct from your camera straight into Toast and then to DVD. There's a lot less transcoding steps and loss of quality in that direct to DVD disk creation in Toast. However, having said that,...There's good arguments probably for both.
What I've seen promoted most often (as most people don't have Toast or aren't motivated to buy it) is to Share to Media Browser (choose the Large size option) and then from inside iDVD click the Media Button and the Movies button to find the project under the iMovie star icon in the Media Browser window. Drag that project into your iDVD project and burn the disk.

What's the best method of burning CD/DVD using MBP?

As per my title, what is the best method of burning CD/DVD using my MBP? Can I use iDVD, disk utility etc? I'm referring to burning stuff like music, photos, doc etc. I used Toast Titanium (shd be version 6) with my iBook G4 but it doesn't seem to work with MBP after data migration. Guess the version is too old and not supported in Snow Leopard. Is there any upgrade for Toast Titanium and how much would it cost?

Hi tanvivien,
The best method is really going to depend on what you're burning. All of the iLife applications (iPhoto, iDVD, iMovie, etc.) make it pretty easy to burn with the click of a couple of buttons via the "Share" menu drop down.
You can use Finder for files/data as well as media but if it's multimedia then usually the programs where they're managed or stored is easier.
Information on Toast and how to upgrade would be found here - http://www.roxio.com/enu/products/toast/titanium/overview.html

What is the best way to Burn a DVD Movie

What is the best way to Burn a DVD Movie, do I need a specific program?

pamelafrommelbourne wrote:
What is the best way to Burn a DVD Movie, do I need a specific program?
If you're trying to copy a commercial movie and burn it to disc, then it is expressly against the Terms of Use of this community to describe any method to illegally copy or circumvent copy protection DVD's
If you've made a movie and want to author a DVD, then you should use iDVD, Toast or, if you're really skilled, Final Cut Pro X.
If you just want to move a movie to a DVD, which probably won't play on a DVD player, then just insert a blank DVD, and move it over from the finder. Click burn.

Need program to burn a dvd for iMovies.

need program to burn a dvd for iMovies.

Roxio Toast
<http://www.roxio.com/enu/products/toast/titanium/>
commercial
NTI DragonBurn
<http://www.ntidragonburn.com/en/us/product/dragon_burn.asp?>
commercial
DVD Image Utility
<http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
free
Burn
<http://burn-osx.sourceforge.net/Pages/English/home.html>
open source; not clear how active development and support are
Disco
<http://discoapp.com/>
no longer supported, but free
LiquidCD
<http://www.maconnect.ch/>
free; iffy support, but, again, simple
For Terminal users:
mkisofs
<http://cdrecord.berlios.de/private/cdrecord.html>
(part of the cdrtools kit)
Use mkisofs to create the disc image, and burn it with hdiutil or drutil. (Some of the free options mentioned above actually use mkisofs.)

What is the best workflow procedure for importing DV SP 16x9 footage into FCP7 and then exporting the best quality 16x9 to standard DVD so that it looks great (or at least good) on a 50" Samsung LCD TV ?????? Please help! anybody?? Thanks!

We are using a Sony HDV-Z7U camera for acquisition. We recently recorded an event using the camera's non HD capabilities. We set the camera to record "DV SP" 16x9 settings on both Mini-DV tape and CF card.
To import the DV SP footage into FCP7 we chose the "DV NTSC anamorphic" setting in the log and transfer settings window. After a successful transfer from the CF card (the CF card held approximately 83 minutes) we checked the size of the file and found it to be 16 Gigs! Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
We need to burn DVDs of this show - we sent it to compressor and got horrible quality.
What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def. footage and what is the best method for exporting for outputting this footage to DVD that preserves the original quality of the DV SP footage?? Anyone? Many thanks

> Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
No it doesn't. DV is 13GB per hour.
In any case, a Video DVD uses the MPEG 2 codec, not DV.
>What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def.
DV NTSC anamorphic.
>what is the best method for exporting for outputting this footage to DVD...
Use the Compressor DVD preset "Best Quality 90 mins".
>...that preserves the original quality of the DV SP footage?
Not going to happen, you are compressing by a factor of 1:4. Shooting as HDV would have given you better quality material to start with. DV is at the bottom end of the scale.

Q. re Best Quality when burning to image

I have an FCE movie that is about 1:30. I have iDVD5 set to best quality and am burning to an image on disk for a burn with Toast.
Is it truly best quality or would it be same as if burning to disk directly, I.e. iDVD adjusting the quality to less when movie > 55 minutes.
BTW, the 1:30 movie with 13 Chapter markers ended up just under 4gb and is currently being burned with Toast7.

In reading, if I understand correctly, the Best Performance setting is actually the higher quality?
No. Best Performance is because it is one-pass encoding. Best Quality is two-pass encoding and takes longer (and is best quality). I only use Best Quality setting for all of my projects. I'm willing to wait.
A disk image you create is what ends up on your DVD after burning. It doesn't matter whether the encoding goes to disk image or directly to a DVD-R.
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Disk Utility to burn the DVD.
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (not the .img, the one below) in the left-hand window. Click the Burn icon. Your SuperDrive tray will open. Insert a recordable DVD. (DVD-R preferred by me.) Click the Close button. Wait. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and Tiger.
b Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

"150 minute Best Quality" should fit on DVD, right?

I just waited 24 hours for Compressor to encode an SD project in "DVD Best Quality 150 minutes 16:9" and it shows in DVD SP as being 5.5 GB!!!!!!!!!!!!!!
Why would it do that????? It won't burn!!!!! Now I have to encode yet again!!!
I just wasted mucho time waiting for a file that SHOULD have fit on a regular DVD.
What am I missing?

Hey I know the feeling it can be really frustrating.
It happened to me once and what I did was I found a good free "DVD calculator" here Before I throw it into compressor I run it through the calculator to make sure it will fit and know exactly what my settings need to be before hand.
So far no problems what so ever since and what is also awesome is that it does BlueRay calculations as well.

How to output to DVD for duplication

OK, my video is finished. BUT, the file is very large: 5.3 gigs at present. I'm sure that its too large for a dvd disk. So what's the limit for filesize and how can I reduce my video to the necessary size for reproduction?
Also, now that my dvd burner isn't working correctly, I need to send the video to a company that can make copies for me. So my other issue is, how do I output the video from Encore for duplication to DVD? Can encore export all the settings, including menus and content? thanks
My understanding is, a dvd can't be any larger than maybe 4.7 gigs, and that's really pushing it.

Tell Encore to create an image ISO on your hard drive... any other computer with ISO aware software may be used to write a DVD
If you exported from PPro as MPEG2-DVD and your 2 files (audio and video) total 5.3Gig you will need to author in Encore and create a dual layer project for writing to ISO
While some is for CS5 and later, many of the ideas/tutorials in the link below do still apply
The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may help, with more help in message #5

Trying to burn a DVD for my mum to send her home photos

Through help in another forum I have made a slide show from my photos in iphoto (98 pics) and exported them to movies. I then (under advice) opened these in iDVD and tried burning them to a DVD+R disc (twice on separate occasions!) It takes a long time! Both times nothing has been burned to the disc even though it said it was burning. I may have missed some window comments as I wasn't there the whole time. I checked under system profiler that Mac OSX 10.4.11 and it seems that I can read DVD+R and DVD-R. What went wrong? Did I miss a crucial setting up stage? I have reinserted the disc into my computer and it says it's blank.
PS I have a Wharfedale M3 DVD player and on various review sites it says it will read anything. So I live in hope. My DVD+R disks are supermarket Tesco variety that says Technica, Bush, Alba, Daewoo, Goodmans, Matsui, Philips
Have I got the wrong DVD's?

It's always a good idea to buy good quality DVDs because lower quality discs often will have imperfections that increase playback errors. That said, it doesn't sound like the discs are the primary problem. Are you importing the movies or dragging into the menu button area (not drop zones)? What's the total length in time of your slideshows/movies? (under 60 min gets you max quality). It will take a long time to encode video depending on the speed of your processor.
Here are some general tips to increase the odds of successful burns:
Lots of memory helps; and you'll need 10-15 gigs of free space on your main hard drive for scratch space.
Buy good quality disks - I've seen recommendations for Maxell, Sony, Verbatim, TDK and a few others based on testing. I primarily use the first two and usually don't have trouble.
Give yourself lots of time.
Turn off your screen savers and energy savers; don't let your hard drive go to sleep.
Get your computer healthy and ready for some heavy lifting. (video work could be the hardest job your computer can do) I use MacJanitor (from VersionTracker.com) followed by Apple's DiskUtility's Repair Permissions.
Most of the time iDVD is working, it is encoding (compressing) your video to fit on the DVD. Create an image .img file (Save to Disc Image) and use Toast or Disk Utility to burn it to disk. Burn slower than the highest rated speed of your burner (eg. 1 or 2x on a 4x burner).
I keep my projects under 60 minutes (for highest resolution).
I import into iDVD rather than export from iMovie or iPhoto (fewer errors).
No other apps open.
Let it encode and burn while you go to bed; it can take awhile, esp. on older Macs.
If you use iDVD for burning the DVD (and don't make a disk image), don't quit iDVD even when the DVD is burned, until you've played the DVD in a regular player (it's much easier to burn another disk and check to see if the problem was a bad disk, than to go back through all that encoding again by quitting iDVD).
John

By using "Disk Utility", will I burn a DVD to watch on TV or burn a DVD for storage?

Old Toad tells me to burn a DVD from"Disk Utility", but will that burn my DVD so I can watch it on TV, or will it store those files on a DVD?
If best, I would like to actually watch the DVD...

Disk Utility will create a data DVD for storage.
Ony iDVD will burn a video for playback with a DVD player or your Mac.
The current Apple thinking is that the entire world has access to fast broadband and wants to distribute home movies to friends and relatives via download (iCloud) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. That worked for some, but is now said to have been withdrawn by Apple. Also, you can complain bitterly here, perhaps suggesting that Apple could have provided a choice between using iCloud and burning DVDs:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that comes with OS 10.7 Lion (which also omitted iWeb) or will come with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast.

Best quality to burn a dvd for duplication

Similar Messages

Maybe you are looking for