Best Router for the least interference?

I am helping a friend out that owns a small bar. She is trying to let a few people in her place have wireless access to her internet connection, so they can help her out with some bookeeping, do some webpage stuff, let her do orders, etc while out at the bar.
She Had DSL put in that had a wirelss router built in. Somtimes it worked, sometimes it didn't. (the DSL was terrible wired even) She went cable modem, and bought a cheap router from someone else (not my choice!). No one seems to be able to get the wirelss to connect to the thier computer.
Since this is a bar, there is neon everywehre, coolers, and old wireless phone, a couple of wireless camers, but even with your computer right next to the router, people can't get connected. With all of the other things, pushing oput signals in the area, it seems that the inerference mught just be to high. Most of the technology is pretty old, so I don't think anything is in the 2.4ghz band , but i could be wrong.
Could all the neon, etc be cuaing the interference (I tried shutting it off) would an N router working in the 5.8 ghz make a difference?
Essentially, what is the best linksys router in an environement like this that would provide the best signal?
thanks,
Wirelessless

As you have mentioned in the post, so many device installed in the bad, its obevious that there will be an interference between the routers wireless signal and other deviceses. I think N series router will be the best suitable router in that environment. I think you can for WRT160N v3 or WRT400N (As this WRT400N is a Duab Band router) and its a Latest router launched by Linksys recently.

Similar Messages

Best Router for The new iPad and iPhone 4s?

I've rescently purchased The new ipad, and since my wifi hasnt been working with my iphone 4s i didnt expect the wifi to last long on the ipad either, so im thinking of purchasing a new router, what would be the best one for these two products? i also own 2 computers

I love the linksys E4200 ! Its awesome and has a very good rating plus it's top of the line ! It runs just as fast wireless as it does on cat5 ! It's a little pricey but well worth it ! You would not be disappointed.

Best router for the job

Hi,
I was wondering if anyone had a proposition to resolve this situation:
i work in a small office (10 employees, 1 server)
presently, our internet goes trough a linksys router and a linksys switch with power over ethernet
... ITS HORRIBLE... I keep having to reset the router and the internet is not constant (programs such as ichat keep connecting and disconnecting)
my firmware is up to date
does anyone have a better proposition as far as equipement for this type of setup? I was thinking airport extreme maybe? would it be enough?
thanks
JM

I would like to add two more points:
You also need to consider the type of Internet link you have. If you have a slow 1.5Mbit DSL line, even 20 people are downloading large files simultaneously, you are still going to be fine, since your bottleneck is in the slow DSL line. If you have a leased line, and manage some web servers in-house, that could be taxing for the little Apple router.
The other thing you have to consider is what type of office you're going to be covering with the wireless network. Are you in an open floor office (easy) or old brick building (hard)? Apple have always put styling above functionality, and they have always hidden the antennas inside the box. As result, there is very little you can do to shape the radio waveform.
Click Here for a good explaination of different types of antenna and their signal shapes (including the Airport built-in one). As you can see, Apple has a very short range, but it's placement is not very critical. If you need the flexibility of having external antennas, then Apple is not for you either.

Whats the best router for multiple Wireless-G

I just want to know whats the best router for running multiple wireless-G with some things wired and some wireless also sharing on the network and gaming with a good internet connection whats the best router ?
Good Speeds
Good Range
Multiple online sharing
Online Gaming
I think everything is wireless-g
Things i have on the router
Linksys Nas200 - wired
Laptop - wireless
Desktop - wired
2 Xbox 360's - 1 wired and 1 wireless
2 Sony PSP's - both wireless
Soon a wireless printer or a linksys printer server
Message Edited by Sas101 on 11-12-2007 07:30 PM

As you posted it sems that you need good router for wireless connectivity .....
You can go for any N router lile WRT300N.... WRT350N ..... WRT150N ....
They will give you excellent performance for the connection you require.....

What is the best router for mugs connectivity

i am looking for best networking institute in India, for optical networking please suggest, have heard about Networkers Zone (http://networkerszone.com/) , however needs suggestion and what is the best router for mugs connectivity.

For training on the Cisco Optical I would rrecommend Fastlane http://www.fastlane.si/ they would be able to fullfill your training requirements either in India or at another location even at the Cisco Factory in Monza, they can tailor courses to your specific requirements and also do switching and routing courses too, I have know one of the instructors for over 10 years they are very good.
As far as recommending the best router, that all depends on the application, not what you mean by mugs connectivity, I know what mugs is in English but not sure if thats what you mean or if it is an acronym for something else in any case if you post in the router section of Net-Pro with your specific requirements I'm sure someone woule be able to help/advise accordingly.

Help - Best router for netflix streaming?

Hello,
I tried a Netgear wrn3500 and Linksys 610n before buying an Airport Extreme.
I seem to get choppy video from netflix using the Airport Extreme than I did with the other two.
Can someone recommend the best router for Video and gaming?
I am using cable internet (Time Warner)
Thanks
Frank

If online gaming is the most important requirement, you will want to go with routers that support UPnP. All the major game console vendors support sites list compatible routers for their respective versions of online gaming access.
For streaming you will want a router with both Gigabit Ethernet (WAN & LAN-side) and offers 802.11n that operates in the 5 GHz radio band with wide-channels.
Finally, if you want to support both gaming and streaming at the same time, I suggest that you look at routers that can operate in both the 2.4 & 5 GHz bands simultaneously.

Best router for my network

Hi, I have a PowerMac G4 (dual processor) with no wireless option and a PowerBookG4 with airport card, I've been told to get a router in order to have both computers working with Internet at the same time. I bought an Airport Express, but definitely, I need a router, I know that. I just want if somebody can tell me what is the best router for my computers. I've been reading about them, they are G Routers, N Routers, wireless, wired, etc. Before I buy one, I want to be sure I am buying a right one.
Thanks a lot.

Duane,
You have lost me now.
DSL modem from Interent provider is setup as a bridge.
The ethernet cable can be connected directly to the Express and provides me with network and Internet.
1. Create a wireless Network
2. There is a choice in the Express to "Connect using Ethernet".
3. Connection Sharing set to "Share a Public IP Address"
4. Manually put in the IP, Subnet, and Router address assigned by your ISP.
Works just fine for me. I have been doing this for many years.
I also have set it up like I mentioned above.
Cheap hub. Plug in the DSL modem in bridge mode to the hub. Plug in the Express to the hub.
Setup the Express as outlined above. Same thing with an Extreme or a TC...
Again, works for me..
You say NO DHCP service for Ethernet Clients. OK... Put in a static IP and you shouldn't have any problems.
Joseph Kriz

Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.

Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.
The above is what the bar says. It's been a while and wondered, maybe Apple changed the format for forums. Then got this nice big blank canvas to air my concerns. Went to school for Computer Science, BSEE, even worked at Analog Devices in Newton Massachusetts, where they make something for apple.
The bottom line is fast CPU = more FPU = more headroom and still can't figure out why the more cores= the slower it gets unless it's to get us in to a 6 core then come out with faster cores down the road or a newer Mac that uses the GPU. Also. Few. I'm the guy who said a few years ago Mac has an FCP that looks like iMovie on Steroids. Having said that I called the campus one day to ask them something and while I used to work for Apple, I think she thought I still did as she asked me, "HOW ARE THE 32 CORES/1DYE COMING ALONG? Not wanting to embarrass her I said fine, fine and then hung up. Makes the most sense as I never quite got the 2,6,12 cores when for years everything from memory to CPU's have been, in sets of 2 to the 2nd power. 2,4,8,16,32,64,120,256,512, 1024, 2048,4196,8192, 72,768. Wow. W-O-W and will be using whatever I get with Apollo Quad.
Peace to all and hope someone can point us in THE RIGHT DIRECTION. THANK YOU

Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this

I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder

Djembe wrote:
UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
5. No special drivers are needed.
Thanks. What about the thunderbolt port?
7. I think Lenovo estimates 6 hours.
Lenovo says 6 hours with the 6-cell battery on its website.
BrendaEM wrote:
Hi,
There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

Best Practice for the Service Distribution on multiple servers

Hi,
Could you please suggest as per the best practice for the above.
Requirements : we will use all features in share point ( Powerpivot, Search, Reporting Service, BCS, Excel, Workflow Manager, App Management etc)
Capacity : We have 12 Servers excluding SQL server.
Please do not just refer any URL, Suggest as per the requirements.
Thanks
srabon

How about a link to the MS guidance!
http://go.microsoft.com/fwlink/p/?LinkId=286957

Best practice for the test environment & DBA plan Activities Documents

Dears,,
In our company, we made sizing for hardware.
we have Three environments ( Test/Development , Training , Production ).
But, the test environment servers less than Production environment servers.
My question is:
How to make the best practice for the test environment?
( Is there any recommendations from Oracle related to this , any PDF files help me ............ )
Also please , Can I have a detail document regarding the DBA plan activities?
I appreciate your help and advise
Thanks
Edited by: user4520487 on Mar 3, 2009 11:08 PM

Follow your build document for the same steps you used to build production.
You should know where all your code is. You can use the deployment manager to export your configurations. Export customized files from MDS. Just follow the process again, and you will have a clean instance not containing production data.
It only takes a lot of time if your client is lacking documentation or if you re not familiar with all the parts of the environment. What's 2-3 hours compared to all the issues you will run into if you copy databases or import/export schemas?
-Kevin

Best Resoltion for the 7" Digital Photo Frame

Hello,
I have got a
*Digital Photo Frame II, 7"W, 720 x 480, Sensor Touch, MP3 Player-Funktion PA3637K-1ETC*
The Manual doesn't tell me about the best Resolution for the Pictures to put on.
on the Web you can Find: 800 x 480 Pixel WVGA-Screen (720 x 480 Pixel sichtbarer Bereich)
The samples are 726x 480 pixel.
Now my Problem:
When you put Pictures on it - *It cropps a bit on the right and left side and much more on the top and bottom.*
I have tried a lot of sizes. Even on 720 x 480 it cropps.
So my question is : What is the best Resolution for the PICs ?
Best Regards
Markus

Sorry,
check your calculator: 800:533 is NOT 1.562... Mine Says : 800:533 = 1.5009380863039399624765478424015
That is less wrong than it cut's off.
Try it: take a white pic with 800x533 and draw a black frame of 10 pixels on the border. you won't see it on all sides !
That makes 20 pixels (10 on each side) of 533 cut off ... that is more than 0.0009380863039399624765478424015 error.
Markus
Message was edited by: markusb68

What is the best microphone for the MacBook

What is the best microphone for the MacBook

What do you plan to use this microphone for? By "best" do you mean best sound quality? Best price?
We can help you but your question is a little vague.
Best of luck.

I am traveling to India with my new iPad...to enable me to be online 24hrs a day to access my emails...do I just need a local sim card...also can I use a normal adaptor to plug in to charge or am I best paying for the apple universal kit....

I am traveling to India with my new iPad...to enable me to be online 24hrs a day to access my emails...do I just need a local sim card...also can I use a normal adaptor to plug in to charge or am I best paying for the apple universal kit....

If you have the AT&T 3G iPad then you can explore the SIM card. I'm not sure if India has the SIM network or another type. REgardless you should be able to access wifi.
HOnestly, if I were traveling I'd get a plug adapter from a normal retail store. You can get a good one for $20 or less at your local retailer, Walgreens, Walmart, Target, probably KMart though I've not looked for them there. Best Buy and the office supply stores may also have them. You don't have to pay for the official one unless you want to. (I have 'over the counter' plug adapters so if I traveled I'd use what I have not buy another)

Best Practice for the Vendor Consignment Process

Hiii ,,,
Can anybody have the best practices for the Vendor consignment process???
Please Send me the document.
Please explain me the Consignment process in SAP??
Thanx & Regards,
Kumar Rayudu

Hi Kumar,
In order to have Consigment in SAP u need to have master data such as material master, vendor master and purchase inforecord of consignment type. U have to enter the item category k when u enter PO. The goods receipt post in vendor consignment stock will be non valuated.
1. The intial steps starts with raising purchase order for the consignment item
2. The vendor recieves the purchase order.
3. GR happens for the consignment material.
4. Stocks are recieved and placed under consignment stock.
5. When ever we issue to prodn or if we transfer post(using mov 411) from consignment to own stock then liability occurs.
6. Finally comes the settlement using mrko. You settle the amount for the goods which was consumed during a specific period.
regards
Anand.C

Best Router for the least interference?

Similar Messages

Maybe you are looking for