Best Scenarios when to use IDOC Adapter, RFC Adapter and Proxy

Please provide me links/weblogs which demonstrate the full scenario that when to use IDOC Adapter, RFC Adapter and Proxy when working with sender R/3 system.
Regards
Rachit

Hi abhinash,
Check these links for java proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
for ABAP Proxy ...
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
for RFC .....
RFC-xi-SOAP Scenario
How to send RFC response message back to XI File/FTP adapter?
https://weblogs.sdn.sap.com/pub/wlg/3865//Troubleshooting [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
Hope you will find them useful ..
Regards
Abhi

Similar Messages

My 4s has grainy low res images when I use google image search, imdb and USA today app. But not FB. How do I fix this?

My 4s images are grainy and low res when I use google image search, imdb and a couple other apps. My photos roll pics are hi def just not images. What's up with this?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me. thanks ravi

i m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me.
thanks
ravi
<Email removed by Host>

sounds more like Bluetooth rather than moue, but w/o knowing w/o posting mac model type/year we... will... not... know... what you have
All computers are personal computers, a PC though is also "non-Apple" in common usage.
Mac also is platform and OS.
Very confused reading what you are trying to tell us.

Why when i use a new apple Id and new id for icloud all my information is gone? For example all my contracts are all gone.

I don't know why when i used a new apple ID and new icloud ID all my information is done. My contracts are all gone. This only happen on on phone. When i was changing the other phones it works fine. Nothing is lost. So i dont understand when i was changing the apple ID and icloud Id the information is lost. You know when you go to setting and you click iCloud and i saw that the contracts book was light on. Does that matter? Does that cause i lost my contracts?

I don't think the iPhone is really designed for people to be switching from one Apple ID to another so when you do so you may experience problems. You have two options on the iPhone for where you can be accessing contacts, from iCloud and the iPhone itself. You can also pull contacts off of a SIM card but they are then stored on the iPhone and not accessed from the SIM card.
You could try this;
1. Go to Settings > iCloud
2. Sign in to the Apple ID that you want the Contacts from,
3. Turn "On" the Contacts slider and let it download all of your contacts
4. When it's done downloading, turn the slider back to "Off" and you should get a message like this..."What would you like to do with the previously synced iCloud contacts on your iPhone?"
5. Then select "Keep on My iPhone"
Then after that you can then sign out of that Apple ID and into your other Apple ID and the contacts shouls still be there.

When i use a headphones they work and the speakers also work

when i use a headphones they work and the speakers also work

Hello did you try to update your sound drivers? You can also select as default device the headphones or the speakers in the sound configuration in control panel

What is the best wireless printer to use with an IPad Air and IPhone?

What is the best wireless printer to use with an IPad Air and IPhone that will print both text and photos? Also, is the separate keyboard available for the IPad Air, yet?

Best is relative. Different people like different things. I have an epson that I like. I'd look through a site like Best Buy and compare reviews for Air Print enabled printers.
as to the keyboard, I know Zagg has one and I think there are other manufacturers that have keyboards for the Air. As far as I know, pretty much any bluetooth keyboard will work, but if you want a case then you'd need to get a specific one.

Sending IDocs via RFC Adapter

Hello!
In an itegration scenario, we need to send (non XML) IDocs via RFC to a remote R/3 system (4.6C). As we don't want to get these IDocs persisted on the target system, it's intended to address the remote functions directly.
Now the problem:
- RFC Adapter only works with XML IDocs (so we cannot transfrom back to native IDoc)
- IDoc-Adapter sends native IDocs, but only to IDOC_INBOUND_ASYNCHRONOUS on target system (and the Idocs will be persisted)
In a next step, we also tried to implement a workaround with a local ABAP proxy on the XI system. But it seems, that it's not allowed to call a abap proxy locally on the integration engine.
Has anybody any idea to solve this problem? Maybe I'm thinking too complicated Help is highly appreciated!
Cheers,
Matthias

Hi,
what kind of document you want to post?
most (many) IDOCs use BAPIs so you can
just call the BAPI (RFC) from XI
>>>But it seems, that it's not allowed to call a abap proxy locally on the integration engine.
you can call it on another client on the XI
(which is set as application system in SXMB_ADM)
Regards,
michal

Changes don't reflect using BAPI_PROJECT_MAINTAIN through RFC adapter

Hi,
I am working on a Integration Scenario in XI. In this I am executing BAPIs through RFC adapter. I am using BAPI_PROJECT_MAINTAIN to create WBS Elements in Project System. After creating WBS Elements when I try to define the hierarchy, the BAPI calls executes successfully but the hierarchy is not visible when viewed in the SAP WEB GUI.
I am using following parameters to define WBS hierarchy:
*IMethodProject
    OBJECTTYPE = WBS-HIERARCHY
    METHOD = CREATE
    OBJECTKEY =
    REFNUMBER =
    OBJECTTYPE =
    METHOD = SAVE
    OBJECTKEY =
    REFNUMBER =
*IProjectDefinition
    PROJECT_DEFINITION = P-0300-00-04
*IWbsHierarchieTable
    WBS_ELEMENT = WBS-001
    PROJECT_DEFINITION = P-0300-00-04
    UP =
    DOWN = WBS-002
    LEFT =
    RIGHT =
    WBS_ELEMENT = WBS-002
    PROJECT_DEFINITION = P-0300-00-04
    UP = WBS-001
    DOWN =
    LEFT =
    RIGHT =
In normal case the WBS element 'WBS-002' should move below 'WBS-001', but when I execute BAPI with above parameters, the Hierarchy is not visible in the GUI the both WBS Elements remain at root level, even I get '000' as response with no errors.
When I run the BAPI through transaction SE37 with same parameters as above, the changes are visible in the GUI.
Can anyone please tell what am I missing here.
Thanks & Regards,
Ajay

Hi Ajay,
I understand the problem this way, when u do something thru XI you dont see the effect (even if the the transaction is successful), whereas when it done is directly in the R/3 you can see the output.
look into the below
- check if your XI user is having necessary authorisations (you can do this by enabling the trace in ur R/3 - back end system)
- check if you are passing the input properly in the XI. (like field formats, padding characters, prefixes etc)
Hope this helps to fix ur issue
Regards
Vishnu

Wheh to use abap proxy and when to use idoc

Hi All,
Please provide some clarifications for the below points :
What is Sproxy?
2.     Why we are using Sproxy instead of Idocs
3.   When we are going Proxy ?
4.   What are the types of proxy ?
5.   How to Create to Proxy ?
6.   What the Difference between SProxy and Idocs
   7.   What is SOAP file? When we are using SOAP file ?
Thank you.
Regards,
Bharat

Hi Bharat,
You seem to have a range of Questions. I will try and answer as many as possible.
What is Sproxy?
SPROXY is a transaction [T-Code] on the SAP ECC/CRM etc side where you can see the objects designed in SAP PI ESR and develop its corresponding ABAP code. SPROXY T-Code displays the Service Interface. You can read more about it in the following site:
**************** - XI - ABAP Proxy communication
2.     Why we are using Sproxy instead of Idocs
For Certain implementations Standard IDocs may not be available and it is quite tedious to create a Z- IDoC and therefore it is advantageous to use Proxy. You can read more about this doubt in the following links:
Choosing to use IDOC standard or ABAP Proxy?
IDOC vs Proxy
ABAP Proxy Vs IDOC
3. When we are going Proxy ?
When there are no Standard IDocs available. Please refer above links to get an answer for this.
4.   What are the types of proxy ?
5.   How to Create to Proxy ?
Again the following link has the answers for both these questions:
**************** - XI - ABAP Proxy communication
6.   What the Difference between SProxy and Idocs
Difference is in the way the communication happens. Standard Idocs are already provided and you can use them directly while Proxy you will require to write the code on ECC side. You can refer the following link to understand more:
Advantage of ABAP proxy over BAPI
7. What is SOAP file? When we are using SOAP file ?
I have not heard of anything called SOAP file. SOAP is a protocol used for communication and you can send files as attachment in your SOAP to Any(file/idoc/Soap etc) or vice Versa Interfaces. Infact Proxy itself is SOAP based communication with XI 3.0 Protocol.
Please explore SCN to know more about the various scenarios. There are endless possibilities in SAP PI.
Hope this Helps.
Thanks & Regards,
Tejas Bisen

One adaptive RFC Model and Multi Backend System.

Hi All,
I am trying to fetch data from multi backend system by using an adaptive RFC model.
It is not tidy to create multi model for a RFC function to fetch data from multi SAP system, because we have dozens of SAP systems.(over 40)
So, I would like to switch to multiple SAP systems with an adaptive RFC model at runtime.
1 model(Same Function) -
> System A
> System B
> System C
Is there any sample or tutorial about this sort of senario?
Thanks in advance.
Message was edited by: JeongEog IM
Message was edited by: JeongEog IM

JeongEog,
You may use SAP java Connector for doing that. Refer the following links for the step-by-step approach.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/d2/561106b8b3bc449f890cddfdc8d3e2/content.htm">Example program 1</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/f0/eedf3d0eb8af5ee10000000a114084/content.htm">Open Connection</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/24/efdf3d0eb8af5ee10000000a114084/content.htm">Calling a Function and Closing a Connection</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/6a/14e13d8ee4535ee10000000a114084/content.htm">Example program 2</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/bc/eedf3d0eb8af5ee10000000a114084/content.htm">Connection Pool</a>
Bala

When to use doGet(...) and when to use doPost(..)

Hi,
here is what i would like to do:
I have a html file that will take user input and pass these inputs to a servlet as parameters. the servlet then uses these input parameters to query for data in a database and then write this results back to the browser. Here is my problem:
If I use doGet(...) and hardcode the input parameters instead of taking them from the html file, I then can compile and run it from Jdev IDE. And if I use doPost(..) instead, I can only compile the servlet, but when run, I got the error message :
"The page cannot be displayed
The page you are looking for cannot be displayed because the address is incorrect."
To my understanding, please correct me if I am wrong,we use doPost() to accept pararmeters from a html. Please help me. thank you very much.
Tran T.
codes are as below:
<HTML>
<HEAD><TITLE>Session Payment Status</TITLE></HEAD>
<BODY>
<FORM ACTION="http://localhost:8080/servlet/SessionPaymentStatus" TARGET="FRA2" METHOD="POST">
<CENTER><H1><FONT COLOR="GREEN" SIZE="5"> Session Payment Status</FONT></H1></CENTER>
</HTML>
And my servlet is:
package paymentstatus;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import gmstocms.*;
import java.util.*;
import com.gaexpress.javaadapter.*;
public class PaymentStatus extends HttpServlet {
//CMS Related
private String xmlRecord = null;
private String storedProc = null;
private String ID = null;
private CmsXmlParser parsedRecord = null;
private Vector vecData = null;
//Record Header
String RecordID = null;
public void init(){
this.storedProc = "OLEDB$GETSESS";
this.ID = "CE97607";
public String getCMSRecord(){
//xmlRecord = new String (CMSTest.executeSP("OLEDB$GETSESS","CE97465"));
return new String (CMSTest.executeSP(storedProc,ID));
public CmsXmlParser getParsedRecord(){
if(parsedRecord == null){
parsedRecord = new CmsXmlParser(getCMSRecord());
return parsedRecord;
public void doGet(HttpServletRequest req, HttpServletResponse res) throws ServletException, IOException{
res.setContentType("text/html");
//res.setHeader("Welcome to Directional Project", null);
PrintWriter out = res.getWriter();
getParameters(req);
out.println("<LEFT><H2><FONT COLOR=GREEN SIZE=3>" + getParsedRecord().getCMSRecordHeader() + "</FONT></H2></LEFT>");
out.println("<HTML>");
out.println("<HEAD>");
out.println("<TITLE> Bidirectional Project </TITLE>");
out.println("</HEAD>");
out.println("<LEFT><H2><FONT COLOR=GREEN SIZE=3>" + getParsedRecord().getCMSRecordHeader() + "</FONT></H2></LEFT>");
out.println("</HTML>");
out.close();
//get the parameters to for the email to be sent to the given address
private void getParameters(HttpServletRequest req) throws ServletException, IOException {
this.storedProc = req.getParameter("optProName");
this.ID = req.getParameter("optCustID");
null

U can use doPost() simply call the doGet() in the doPost() as follow...
Let me know if u still have problem...
public void doPost(HttpServletRequest req, HttpServletResponse res) throws ServletException, IOException{
doGet(req, res);
null

OBIEE 11g best practice - when to use the new "presentation hierarchies"

Hi, maybe a dumb question, but what are the rules of thumb for when to expose a presentation hierarchy to end users. Obviously this must be done when using a parent / child hierarchy, as there is no level info that would allow drilling the "10g" way. However, I'm not so sure what the bonuses / drawbacks are when using level based hierarchies.
I have noticed that the SQL seems more complex and less performant when using the hierarchy. As an example, I have a simple dimension (business unit) that has a hierarchy with a total level, and 3 members in the detail level.
If I create this as a 10g style report, I add business unit column, dollar amounts, and a table total (so I can see grand total amounts), the SQL launched looks like this:
WITH
SAWITH0 AS (select sum(1) as c1,
sum(T45393.SPEND_AMOUNT) as c2,
T45273.BUSINESS_UNIT_CODE as c3
from
DIM_BUSINESS_UNIT T45273,
FACT_SPEND_ANALYTICS T45393
where ( T45273.BUSINESS_UNIT_KEY = T45393.BUSINESS_UNIT_KEY )
group by T45273.BUSINESS_UNIT_CODE)
select distinct 0 as c1,
D1.c3 as c2,
D1.c2 as c3,
D1.c1 as c4,
0 as c5,
0 as c6
from
SAWITH0 D1
This is simple and efficient, and OBIEE "knows" the grand total can be calculated by simply summing the business unit totals together.
But if I create this as an 11g style report using the presentation hierarchy, with all members selected (so I can get the detailed business units plus the grand total), the SQL is much less efficient, it actually fires two queries - one for the detail level, another for the total level:
WITH
SAWITH0 AS (select distinct sum(1) as c1,
sum(T45393.SPEND_AMOUNT) as c2
from
FACT_SPEND_ANALYTICS T45393)
select distinct 0 as c1,
NULL as c2,
'All Business Units' as c3,
1 as c4,
NULL as c5,
D1.c2 as c6,
D1.c1 as c7
from
SAWITH0 D1
AND
WITH
SAWITH0 AS (select sum(1) as c1,
sum(T45393.SPEND_AMOUNT) as c2,
T45273.BUSINESS_UNIT_CODE as c3
from
DIM_BUSINESS_UNIT T45273,
FACT_SPEND_ANALYTICS T45393
where ( T45273.BUSINESS_UNIT_KEY = T45393.BUSINESS_UNIT_KEY )
group by T45273.BUSINESS_UNIT_CODE)
select distinct 1 as c1,
D1.c3 as c2,
'All Business Units' as c3,
1 as c4,
D1.c3 as c5,
D1.c2 as c6,
D1.c1 as c7
from
SAWITH0 D1
Not only does this fire off two queries - but it doesn't use the existing cache for the "detail" level generated by the "non-hierarchy" query.
So I'm trying to figure out pros and cons of exposing hierarchies for end users. I've come up with the following:
Pros:
- Users can click on the + and - signs to drill / collapse individual members while still keeping all other members on the report
Cons:
- Queries fired at all levels, doesn't seem like it's smart enough to figure out it doesn't need to send a level query to database if all children were already queried
- In 10g if I want to expand all children (i.e. drill down all quarters to the month level) I could just click on the column header. Doesn't appear to be any way to do that using the hierarchical drills, I have to click each and every one to see all the months.
Any insights would be appreciated!
Thanks,
Scott

Hi, no, I haven't tried setting options such as "report based totals" - simply because I wouldn't want an option that requires users to tweak settings on each and every report they create to get stuff working efficiently.
Thanks,
Scott

When to use Drop In Item renderer and InLine Item Renderers ??

Hi ,
I am getting confused in where to use Inline ItemRenderer and DropIn Item Renderer .
What i feel is that DROP in Item Renderer are easy to use , and those can satisfy any requirements .
What i read from tutorilas that we cant use Drop In because they say , The only drawback to using drop in is that them is that you cannot configure them
Please help me .

Hi Kiran,
Here is the detailed explanation you needed:
You can also refer the link below:
http://blog.flexdevelopers.com/2009/02/flex-basics-item-renderers.html
Drop-In Item Renderers
Drop-In Item Renderers are generic in nature and don't rely on specific data fields to render data. This allows them to be used with a wide range of data sets, hence, the term “drop-in”. Drop-In Item Renderers can be “dropped-in” to any list-based control regardless of the dataprovider’s data properties.
In our previous example, the employee photo property requires use of a custom Item Renderer to render properly in the UI. In this scenario the Image component satisfies our rendering needs out of the box. Implemented as a Drop-In Item Renderer, the Image component takes any data property regardless of name and uses it as the Image component's source property value. Assuming our employee photo property contains a valid image path, the Image Drop-In Item Renderer will work perfectly and resolve the image path as an image in the UI.

<mx:DataGridColumn dataField="photo"
                   headerText="Employee Photo"
                   itemRenderer="mx.controls.Image"/>
Drop-In Item Renderers are simple and easy to use and satisfy specific use cases nicely. However, they provide no flexibility whatsoever. If your needs are not satisfied by a Drop-In Item Renderer, you must create your own Item Renderer as an inline component or an external component.
Inline Item Renderers
Generally used for simple item rendering requiring minimal customization, inline Item Renderers are defined as a component nested within the MXML of your list-based control.
It is important to note that Item Renderers nested within the itemrender property of a list-based control occupy a different scope than the list-based control. Any attempt to reference members (properties or methods) of the parent component from the nested Item Renderer component will result in a compile-time error. However, references to the members of the parent component can be achieved by utilizing the outerDocument object.
<mx:DataGrid id="myGrid" dataProvider="{gridData}">
   <mx:columns>
      <mx:DataGridColumn headerText="Show Relevance">
         <mx:itemRenderer>
            <mx:Component>
               <mx:Image source="{'assets/images/indicator_' + data.showRelevance + '.png'}"
                         toolTip="{(data.showRelevance == 1) ? 'On' : 'Off'}"
                         click="outerDocument.toggle()" />
            </mx:Component>
         </mx:itemRenderer>
      </mx:DataGridColumn>
   </mx:columns>
</mx:DataGrid>
Remember, rules of encapsulation still apply. Mark all properties or methods public if you want them accessible by your inline Item Renderer. In the previous example, the toggle() method must have a public access modifier to expose itself to the inline Item Renderer.
public function toggle():void
Inline Item Renderers can also be reusable by creating a named component instance outside of the list-based control. This component must have an id property and contain the rendering logic of the Item Renderer. Using data bindings, the component is assigned to the itemrenderer property of one or more data properties of a list-based control.

<mx:Component id="ImageRenderer">
   <mx:VBox width="100%" height="140"
            horizontalAlign="center" verticalAlign="middle">
      <mx:Image source="{'assets/'+data.image}"/>
      <mx:Label text="{data.image}" />
   </mx:VBox>
</mx:Component>

<mx:DataGridColumn headerText="Image"
                   dataField="image" width="150"
                   itemRenderer="{ImageRenderer}"/>
In the previous example, note that the Item Renderer component contains 2 UI controls – Image and Label. When using multiple controls within an Item Renderer, a layout container is required. In this example, a VBox was used.
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari
Message was edited by: BhaskerChari

Using IDOCS to sync SAP and a Non SAP system

Hi everyone,
In the current scenario users create customers in SAP. We have used change pointers so that changes to fields cause an IDOC to be generated. This is then sent to Websphere and a flat xml file representation of the IDOC is created.
My problem is around how IDOCS and change pointers handle clears in fields.
For example if i add an entry into the NAME 2 field usnig XD03 (we have a change pointer on this) an IDOC is generated and i can see my entry in the correct IDOC segment.
If i then clear that entry so the field is null an IDOC is generated but there is no NAME 2 segment.
The recieving system has no idea what field has been cleared.
Has anyone come across this??
Cheers
Carston

Ok cool,
So if i make a change in the KNA1 section i get a full E1KNA1M segment - thats great thanks. That should work
Only issue (and its more for the comsuming system) is that the xml file they load has KNVV fields in also.
As the idoc hits websphere they will be able to map all the kna1 fields to the relevant xml nodes. Where NAME2 is now null that will map to a blank xml node. Perfect.
Its how it handles the segments that arent in the sap idoc which worries me. As the KNVV segment isnt there i think they are planning to create blank nodes for the fields so the xml stucture is always complete. The consuming system wants to totally reload the customer based on Kunnr each time it gets an IDOC. So in that case it will load all the KNA1 stuff correctly, including the fact name2 is now blank, but it will then also blank every knvv entry in their table.
I guess i need websphere to note that there is no KNVV idoc segment and therefore not create any xml nodes for those fields.
Then it falls on the consuming system to be able to load partial xml structures in effect.
Its been good to think this through
I would be interested in any feedback you have.
Cheers

I have graphical errors on the browser edges when i use the right click menu and close out tabs.

Ok I will try to explain this the best way I can as I'm not sure what to call it. But simply put, if I have FF4 open, sometimes I get a graphical glitch on the edge of the window. It seems to always occur when I right click near the edge of the browser window, then close out that current tab. A small part of the context menu remains on the screen. Here is a screenshot:
[http://img.photobucket.com/albums/v475/JunkHead/fireglitch.jpg]
notice the section in the lower right hand part of the browser. That's the leftover context menu in the edge of the window. There is also a section on the bottom of the browser as well. I didn't plan on that one, and have no idea why it is there. I had no menu open there. Anyone every see this before?

You can also use ctrl-T or File > New tab (if you have the menubar showing). I can't find an extension that will help you bring back the previous behavior but there probably will be one soon.

Best Scenarios when to use IDOC Adapter, RFC Adapter and Proxy

Similar Messages

Maybe you are looking for