Best setting for personal web upload

Hi all,
I'm trying to export a video for my personal web upload.
I exported a clip of H.264, Middium Quality, Size-below 640xXXX in 16:9 mode. File size about 16MB & bad quality at last!
What's your suggestion setting either via FCP or Compressor for export?
Better quality & better file size ;)
Thanks!!

For each of these select File>Export>Using QT Conversion and in the window thst opens change the "Use" to Broadband High or Medium from the dropdown menu.
As these are for 4:3 you will have to click the Options button and change "Size" to Custom and type in one of the sizes mentioned earlier.
Then open the Settings window and under Data Rate select "Restrict to 750kbps or 300kbps" according to the size you are using.

Similar Messages

  • What's the best setting for a best shades quality?

    Hi!
    I would like to know what are the best codec and the best setting for a video with 1920x1080 of resolution.
    I've tried them all but nothing because the shades...are not shades.
    I want a video that is like a uncompressed video but lighter. Same quality, same shades.
    I've tried with Canopus Lossless but the video is darker and huge (7 min for >17 gb),
    then with Canopus HQ, same quality but a little bit lighter (6 gb),
    I've tried with all of codecs and settings but I haven't found what I want.
    Who can help me for the best settings for the best shades?
    Thanks so much.
    P.S: Sorry for my english!

    I used the PNG codec but the video is too big.
    New Question:  I've tried to encode the video with Canopus HQ but to 720p and now the video is more lighter, I wanted to upload it on YouTube but is not compatible with the standards.
    If I encode this video by changeing the codec to Microsoft Avi uncompressed, can I have the same quality and the same weight?

  • What is the best setting for export movie in widescreen format?

    Please tell me what is the best setting for exporting movie in Widescreen format?

    Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
    Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
    Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
    However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
    bogiesan

  • Best Practice for Securing Web Services in the BPEL Workflow

    What is the best practice for securing web services which are part of a larger service (a business process) and are defined through BPEL?
    They are all deployed on the same oracle application server.
    Defining agent for each?
    Gateway for all?
    BPEL security extension?
    The top level service that is defined as business process is secure itself through OWSM and username and passwords, but what is the best practice for security establishment for each low level services?
    Regards
    Farbod

    It doesnt matter whether the service is invoked as part of your larger process or not, if it is performing any business critical operation then it should be secured.
    The idea of SOA / designing services is to have the services available so that it can be orchestrated as part of any other business process.
    Today you may have secured your parent services and tomorrow you could come up with a new service which may use one of the existing lower level services.
    If all the services are in one Application server you can make the configuration/development environment lot easier by securing them using the Gateway.
    Typical probelm with any gateway architecture is that the service is available without any security enforcement when accessed directly.
    You can enforce rules at your network layer to allow access to the App server only from Gateway.
    When you have the liberty to use OWSM or any other WS-Security products, i would stay away from any extensions. Two things to consider
    The next BPEL developer in your project may not be aware of Security extensions
    Centralizing Security enforcement will make your development and security operations as loosely coupled and addresses scalability.
    Thanks
    Ram

  • Can anyone help me with getting the best setting for me system

    can anyone help me with getting the best setting for me system on cpufan it says my temp is 38c but on corecentre it says 42c can anyone help get my system overclocked any more but keeping it stable as well thanx in advance for the help  

    my corecenter temp sometimes says im at 60 cel at idle....and i have the most recent update...i would rely on speedfan for temp control...core center seems to always read 3 degrees higher than speedfan on my pc....
    i wouldnt be too concerned...those temps are pretty low to begin with.

  • Best practice for consuming web services

    Hi
    we are consuming web service in orchestration by "Add Generated Item".By using this option it creates 1 orch,1xsd file and some bindings.
    we have different projects for schemas,maps and orchestration under our solution in visual studio.
    Now i need to know that what will be the best practice for consuming web service in orchestration i mean in which project should i use "add generated item" (in orchstration project or in schemas project) coz it generates both 1 orch and 1
    schema.
    thanks

    From a service orientation perspective you should abstract the service artifacts from the other artifacts. Otherwise it will be very difficult to update the service interface without affecting the other artifacts. For example you don't want to have to redeply
    your entire application if only one field changes in the service you consume.
    So I typically generate the items, remove the unnecessary stuff, and put them in a separate project.
    Depending on the control you have over the services you want to consume, it would even be better to create another layer of abstraction. By that I mean create your own interface (schema) and map that one to the one the service exposes. This basically
    is only necessary if you consume external services that are beyond your control. By abstracting the interface it exposes, you limit the impact of changes of that interface on the rest of your system. All changes are abstracted behind your own interface.
    If you consume internal services, you can probably control the way the interface is defined. In a service oriented world all internal services expose a well known interface, based on the domain objects you have within your organisation.
    Jean-Paul Smit | Didago IT Consultancy
    Blog |
    Twitter | LinkedIn
    MCTS BizTalk 2006/2010 + Certified SOA Architect
    Please indicate "Mark as Answer" if this post has answered the question.

  • Best Setting for Best Battery Life!

    Please post for me your best setting for the best battery life on your IPhone 4.
    Thanks.
    Stan

    http://www.apple.com/batteries/iphone.html

  • Hi - was looking to buy a macbook air soon but wanted to get it with lion software....anyone know when that is available and second question is what is best software for personal money management that works with lion.....use quicken now   thanks

    Hi - was looking to buy a macbook air soon but wanted to get it with lion software....anyone know when that is available and second question is what is best software for personal money management that works with lion.....use quicken now   thanks

    quicken should work with lion.
    Quicken Essentials will work with Lion.  Most people that have used Quicken for a while (i.e. Quicken 2007) have found that Quicken Essentials isn't much better than a basic spreadsheet.  It is a significant step down from previous versions and does not offer many of the features previously offered.  Right now, it seems like the two most common options are iBank and MoneyDance.
    Frankly... this is a major opportunity for these companies.  The largest commercial distributor of this type of product has been Intuit (Quicken).  That makes it hard for any other company to get any of that market as so many people were already using Quicken and may have had years of data stored in it.  Now, with Quicken effectively out of the picture, it's a great chance for another company.  Just imagine if iPhones were suddenly off the market.  That would give other manufacturers a tremendous opportunity since they wouldn't have to fight an up hill battle against a market giant.

  • Best setting for my set of devices

    I would like to know what would be the best settings to get the maximum throughput for my set of devices.
    Last night both Airport Extreme and Airport Express were updated with firmware to 7.5.2
    1) Upstairs I have an Airport Extreme. Newer version with 2.4gz and 5ghz bands. This is connected to my AT&T Uverse router/modem. My iMac is ethernet connected to the Airport. Running speed tests I get almost the expected speeds of 12mbs download and 1.5mbs upload.
    I had setup a 2.4ghz network and a 5ghz network but may not have used the best settings for my environment.
    2) Downstairs is an Airport Express. I is a "n" version
    3) Connected to the Airport Express via ethernet is a small ethernet hub and connected to that are 2 Dishnetwork 722 DVRs. Each 722 has a Sling Adapter to allow viewing the contents over the internet via iPhone, iPad or web browser. This was the goal for the Express, to supply that info.
    Getting max speed out of this Express is important to get the DVRs output out of my house and to my iPad or iPhone.
    4) These are the following devices that are connecting at the house via wifi:
    a) iPhone 4
    b) iPhone 3g
    c) Apple TV newest model and is downstairs next to the Airport Express
    d) iPad
    e) Macbook Air first generation and this is used downstairs in the same room as the Airport Express
    Using Airport Utility it appears that all devices show 80211.n and 5ghz except the iphone 3G, which shows 802.11 b/g AND shows it attached to the Airport Express even when I'm next to the Extreme.
    From the Airport Utility, I've seen the values fluctuate but here is what shows Signal, Rate and Noise for each device as a snapshot on the Airport Extreme
    iPhone 4 -44, -96, 65
    Airport Express -59, -96, 144
    Apple TV -70, -96, 52
    iPad -50, -96, 65
    Macbook Air -24, -96, 216
    Using the Airport Utility, the Airport express show these values
    iPhone 3G -66, -85, 54
    Airport Extreme -54, -86 104
    Let me know if you need any other details.

    Any advice on the best Airport Utility settings for the Extreme and the Express?
    The default settings work very well, so unless you have a specific reason to change them, I would stay with those settings
    Should the Express extend a network or join a network?
    "Extend" provides more wireless coverage in the area where the Express is located. "Join" provides better bandwidth if you are using only for iTunes, etc. Most users want more wireless coverage.
    If I were to extend at network, should the Express extend to the 5ghz or the 2.4ghz
    If you have good signal strength at the location of the Express, 5 GHz will support up to 270 Mbps bandwidth. 2.4 GHz will support up to 130 Mbps. You want as much bandwidth as you can get for high definition video performance if you are using wireless. If you have an option to connect the DVRs using ethernet, that will provide the best performance.
    The iPhone would have to connect back to your main router if you set the Express up for 5 GHz. It is not easy to extend 5 GHz. You literally have to have very close to a line of sight situation between the main router and the Express for this to work.
    If I were to get another Extreme, should it join or extend the network on the Extreme upstairs.
    The Extreme does not really do anything if you set it up to "join". The ethernet ports are not active. All you would be able to do with the device in this setting is attach a printer or hard drive to the USB port.
    Any documents that would explain the best choices for linking 2 Extremes together?
    Apple AirPort Networks is a very good guide.
    If you are linking two routers together, an ethernet connection is always the "best" way to do this because it provides maximum bandwidth performance. Up to 1000Mbps with ethernet. "Extending" using wireless only can work well if the "extending" AirPort receives a very strong wireless signal. Ideally, there would be a line-of-sight situation between the devices or close to that ideal.
    Message was edited by: Bob Timmons

  • Best setting for compressor-JVC Everio Hard Disc Camcorder Quicktime file?

    Hi,
    I am still having trouble figuring out why compressor is taking so long. Maybe I need to call Apple Support. I tried the web source setting-medium quality, but it is still taking 4+ hours, and continues to increase in length till completion. It is imported from fcp quicktime movie. What is the best setting to use ?#Agghh this is frustrating. I only want to upload this onto a file share web data base system, I don't even need to burn it to a DVD. Should I choose the H 2.6.. for iPod, the web source setting, or something else? These are just 1 hour/ 1 1/2 hour movies that fit on a 4.7 GB DVD before I imported them into fcp>now the fcp file has expanded up to 69GB. What is the deal? I re-installed fc studio. Any suggestions?

    If a file from a DVD is now 69 GB then it must have been converted along the way from the original DVD.
    How are you importing? What are the specs of the file? What is your work flow process?

  • What is the best practice for developing web service?

    Hi All,
    I'm a newbee to web services...
    I was wondering what would be the best approach in developing a web service,
    using tools or programmatic approach?
    If I use WebLogic Workshop, am I tied to a vendor?
    Is it possible for me to develop web services using workshop and deploy in
    another app server..?
    I would appreciate if somebody could give me a pointer to start.
    I have already referred BEA's docs.
    I'm still confused on a good starting point on the best approach to develop
    protable web services.
    Thanks in advance for any inputs.
    K K

    K K-
    You have a very valid point on the simplify or complicate matters. If you are
    going for clean and not-so-time-centric code, then there are several different
    programs and packages out there you can choose from.
    Since you are specialized in J2EE, than the Sun package may be what you are looking
    for. BEA's classes simplify much of the work you will be doing, but you could
    emulate their classes or extend yours above the functions provided in theirs.
    It all boils down to how much work are you willing to do.
    If you are asking for more detailed, coding 'Design Patterns' to utilize, I would
    wait for a few more posts from other folks as my work often requires me to utilize
    the tools provided.
    Sincerely,
    Eric Ballou
    "K K" <[email protected]> wrote:
    Eric,
    Thanks for the response.
    I was also looking at Sun's WSDP 1.1, which is more programmatic approach.
    Some how, I feel being a J2EE developer, I should go on the direction
    of the
    programmatic approach.
    Using the tools could simplify or complicate things. Also, the Workshop
    samples import all weblogic specific packages.
    My code looks so dirty with many vendor specific packages being imported.
    Could you give me your suggestions for a clean and neat approach?
    I would personally prefer to avoid the quick and dirty approach.
    Thanks again.
    "Eric Ballou" <[email protected]> wrote in message
    news:[email protected]...
    K K-
    The best approach in developing portable web services is knowing whatyou
    are
    planning on using them for as well as how much is willing to be spent,etc.
    BEA's Workshop is portable to other frameworks, but the ease ofintegrating a
    developed client or a developed server can very greatly. Even moreof an
    issue
    is migration from one framework to another. If you choose to developin
    Workshop
    and your company later deploys .Net solutions, some of your work mayhave
    to be
    redone unless the company is willing to keep portions of the 'old'system
    around
    until new versions of the service are available. However, Workshophas
    several
    ant tools available that would assist you in deploying to other appservers or
    even a stand-alone application should you need cross framework abilities.
    If you are just starting out in web services, http://www.webservices.org
    is a
    good place to start checking out vendors in the space.
    Sincerely,
    Eric Ballou
    "K K" <[email protected]> wrote:
    Hi All,
    I'm a newbee to web services...
    I was wondering what would be the best approach in developing a web
    service,
    using tools or programmatic approach?
    If I use WebLogic Workshop, am I tied to a vendor?
    Is it possible for me to develop web services using workshop and deploy
    in
    another app server..?
    I would appreciate if somebody could give me a pointer to start.
    I have already referred BEA's docs.
    I'm still confused on a good starting point on the best approach todevelop
    protable web services.
    Thanks in advance for any inputs.
    K K

  • Best setting for 1080i HD

    I've been looking around on the web for a while now looking for the best solution to output my project for HD.  I create commercials for a local TV station and we just started broadcasting HD commercials.  What is the best setting to use when rendering?  We transfer spots directly into a server for airing so it doesn't need to be compressed and put to other media first.  Any help is appreciated!

    We transfer spots directly into a server for airing so it doesn't need to be compressed and put to other media first.
    But it is being compressed when sent, so ultimately there is little point in insisting doing it uncompressed in any way. Most HD broadcast's are MPEG-2 transport streams, some MPEG-4/ H.264, but which ones depends on the hardware the station uses. Anyway, most of these transcoders/ encoders will gladly swallow native MXF/ P2 files, MPEG-2 program streams or H.264 and be smart enough to merely conform/ transcode it without adding anotehr destructive compression pass. So, given you use sufficient dat rates, it should be safe to use any of those formats. Everything else is surely written somewhere in the encoder box' manual, so you may get better answers from the techs of the station.
    Mylenium

  • Best setting for slideshow

    Whats the best setting to set a slideshow of still pictures too, im not sure which compression type either, ive made a few before thru iMovie but id like to use quicktime pro and change screen size (320X240 if possible) for the web, and trying to make it the smallest file size as i can. Any help would be appreciated.
    I should say im exporting the iMovie file (saved as, for the web setting in iMovie) to change the screen size in quicktime 7.0.4 if anyone needs that info

    Actually you're in the wrong forum and should re-post here. https://discussions.apple.com/community/professional_applications/final_cut_stud io
    Nonetheless, I'll just pass on these comments about slide shows – FWIW.
    My preference is to edit then in a 720p timeline. I find they scale down better from 720 than from 1080 – fewer artifacts, especially when doing pans and zooms. And often these are going to DVD, which means considerable additional down scaling.
    Size them in PS (or the editor of your choice) the same as your sequence settings. If you do have moves (pans zooms) then double the size (ie, 2160X1440).
    Good luck.
    Russ

  • Best setting for Canon VIXIA HF R21 for YouTube

    I am looking for the best or most optimal setting for shooting video with my Canon VIXIA HF R21 camera.
    I am using a MacBook Pro laptop and Adobe Premiere Elements 10.
    My goal is to produce the best quality videos for a "YouTube" channel. The videos will be for a teenage car show shot outdoors and narrated.
    The current DEFAULT settings are:
    Recording Mode = SP, 1440x1080
    Bitrate = 7Mbps
    Codec = MPEG4-AVC/H.264
    Frame Rate = 60i
    Digital Image stabilization = standard
    Here are possible "alternative selections" - please let me know if any of these settings are better than the Default settings for YouTube.
    Change Recording Mode to
    1. MXP = 1920x1080 @ 24Mbps
    2. FXP = 1920x1080 @ 17Mbps
    3. XP+ = 1440x1080 @ 12 Mbps
    Change Frame Rate to
    1. PF30
    Digital image stabilization
    1. Dynamic
    2. Standard
    3. Off
    I will use Adobe Premiere Elemebnts 10 to upload the final edited video - what setting are the best upload compression settings if I want to upload for the ebst quality?

    BillFlorida, I'm not sure what you're not getting here. Have you tried any of the things we've suggested?
    There are two settings you need to worry about. One is your PROJECT setting. That must match your original footage, as I've indicated. If it doesn't, you're going to get poor performance and video quality.
    The second setting is your OUTPUT setting. That's the only setting YouTube is interested in. If you use the output settings I linked you to above -- working from a project that's been set up properly -- you will get excellent YouTube results.
    Try it. You'll see.
    You'll also see, if you experiment a bit, that there's virtually no difference in the quality of FXP and MXP -- especially if you're going to display your video online. The important thing is that your PROJECT settings match that 1920x1080 AVCHD footage and that you use the YouTube output settings recommended in the FAQs.
    Try it. You will see.

  • Best Practice for embedding webi reports in hyperlinks..

    SAP Community
    What is the best practice for embedding hyperlinks (email) from webi and sending to a user?so the users can quickly consume the report with minimal effort (click link and launch infoview/report).
    John

    As mentionned already,  BI has it's own inbox, and/or SMTP integration for broadcasting.
    Else, if you go to Folders, right click on your report instance, then select "Copy URL" (or 'docuemnt link' i cannot remember the exact term.)  - that woudl give you an open document link to invoke the viewer .
    Regards,
    H

Maybe you are looking for