Best setting for render and use in pc

hi dear friends
i have final studio,i dont know why but compressor(software) is not working, i shoot by sony EX-1(xd,tapeless) and edit in fCP. i tested some setting in output to render my sequence and use it in pc. i check avi_dv. dv stream, but i dont like quality in rendered file. uncompress file is ok but as you know size is problem and other software need render or preview to play it back. im looking for a great output setting to render a file and use it in pc or retouch it in premier.
tnx
Pooria

Thanks for the great response and links to much needed info. Very much appreciated.
I gather from your response that Crystal Reports 2008, developer 12.0 has been overcome by events, at least in the scenario of Net development withing VS 2010....
Ralph
Edited by: R3Curler on Sep 16, 2011 2:08 AM

Similar Messages

What is the best app for editing and using powerpoint on my ipad?

I just downloaded pages but cant seem to open my powerpoints in it. Is there a different app i should be using?

The apple version is called keynote, its in the apple App Store.

Best program for monitoring and blocking internet use on my kids mobile devices, iPads, iPhones from my MAC

Whats the best program for monitoring and blocking internet sites and usage for my kids on their mobile devices ipads, iphones and ipods, all from my desktop mac?

Can't be done from your Mac remotely.
But you can enable parental controls directly on iOS devices.
iOS: Understanding Restrictions (parental controls)

What's the best setting for a best shades quality?

Hi!
I would like to know what are the best codec and the best setting for a video with 1920x1080 of resolution.
I've tried them all but nothing because the shades...are not shades.
I want a video that is like a uncompressed video but lighter. Same quality, same shades.
I've tried with Canopus Lossless but the video is darker and huge (7 min for >17 gb),
then with Canopus HQ, same quality but a little bit lighter (6 gb),
I've tried with all of codecs and settings but I haven't found what I want.
Who can help me for the best settings for the best shades?
Thanks so much.
P.S: Sorry for my english!

I used the PNG codec but the video is too big.
New Question: I've tried to encode the video with Canopus HQ but to 720p and now the video is more lighter, I wanted to upload it on YouTube but is not compatible with the standards.
If I encode this video by changeing the codec to Microsoft Avi uncompressed, can I have the same quality and the same weight?

What is the best setting for export movie in widescreen format?

Please tell me what is the best setting for exporting movie in Widescreen format?

Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
bogiesan

DNS best practices for hub and spoke AD Architecture?

I have an Active Directory Forest with a forest root such as joe.co and the root domain of the same name, and root DNS servers (Domain Controllers) dns1.joe.co and dns2.joe.co
I have child domains with names in the form region1.joe.com, region2.joe.co and so on, with dns servers dns1.region1.joe.co and so on.
Each region has distribute offices that may have a DC in them, servers named in the form dns1branch1.region1.joe.co
Over all my DNS tests out okay, but I want to get the general guidelines for setting up new DCs correct.
Configuration:
Root DC/DNS server dns1.joe.co adapter settings points DNS to itself, then two other root domain DNS/DCs dns2.joe.co and dns3.joe.co.
The other root domain DNS/DCs adapter settings point to root server dns1.joe.co and then to itself dns2.joe.co, and then 127.0.0.1
The regional domains have a root dns server dns1.region1.joe.co with adapter that that points to root server dns1.joe.co then to itself.
The additional region domain DNS/DCs adapter settings point to dns1.region1.joe.co then to itself then to dn1.joe.co
What would you do to correct this topology (and settings) or improve it?
Thanks in advance
just david

Hi,
According to your description, my understanding is that you need suggestion about your DNS topology.
In theory, there is no obvious problem. Except for the namespace and server plaining for DNS, zone is also needed to consideration. If you place DNS server on each domain and subdomain, confirm that if the traffic browsed by DNS will affect the network performance.
Besides, fault tolerance and security are also necessary.
We usually recommend that:
DC with DNS should point to another DNS server as primary and itself as secondary or tertiary. It should not point to self as primary due to various DNS islanding and performance issues that can occur. And when referencing a DNS server on itself, a DNS client
should always use a loopback address and not a real IP address. detailed information you may reference:
What is Microsoft's best practice for where and how many DNS servers exist? What about for configuring DNS client settings on DC’s and members?
http://blogs.technet.com/b/askds/archive/2010/07/17/friday-mail-sack-saturday-edition.aspx#dnsbest
How To Split and Migrate Child Domain DNS Records To a Dedicated DNS Zone
http://blogs.technet.com/b/askpfeplat/archive/2013/12/02/how-to-split-and-migrate-child-domain-dns-records-to-a-dedicated-dns-zone.aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I will be buying the new IMac 27 inch in December. Would like input on the best configuration for photographic and possibly video processing-dream machine!

I will be buying an IMac 27 inch in December. What is the best configuration for photo and possibly video processing.Does one need a Mac Pro? Dream machine!

Just to explain what I just wrote to Laundry Bleach:
Why is there no iDVD on my new Mac?
https://discussions.apple.com/docs/DOC-3673
UPDATE & ADDENDUM:
But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
Poster jhb21939 posted this in another thread:
“when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
In response, Old Toad posted this solution:
“You can still use it one all of your Macs. If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer. After you're done reset the time back to the correct time.” He added this comment:
“It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
I've been able to use the installer even without setting back the date. I just clicked on the Continue button and it would work as expected. For some it would not continue unless the date was set back.”
The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

Can anyone help me with getting the best setting for me system

can anyone help me with getting the best setting for me system on cpufan it says my temp is 38c but on corecentre it says 42c can anyone help get my system overclocked any more but keeping it stable as well thanx in advance for the help

my corecenter temp sometimes says im at 60 cel at idle....and i have the most recent update...i would rely on speedfan for temp control...core center seems to always read 3 degrees higher than speedfan on my pc....
i wouldnt be too concerned...those temps are pretty low to begin with.

Best Practice for Planning and BI

What's the best practice for Planning and BI infrastructure - set up combined on one box or separate? What are the factors to consider?
Thanks in advance..

There is no way that question could be answered with the information that has been provided.
Cheers
John
http://john-goodwin.blogspot.com/

How can i get best practice for SD and MM

Please, can any body tell me how can i get best practices for SD and MM for functional approach?
Thanks
Utpal

Hello Utpal,
I am really surprised, in just 10 minutes you searched that site and found it not useful. Check out my previous reply "you will not find screen shot in this but you can add it in this"
You will not find readymade document, you need to add this as per your requirement.
btw, the following link gives you some more link for new SAP guys, this will be helpful. Check out HOW to BASIC transaction
New to Materials Management / Warehouse Management?
Hope this helps.
Regards
Arif Mansuri

Best practice for Plan and actual data

Hello, what is the best practice for Plan and actual data? should they both be in the same app or different?
Thanks.

Hi Zack,
It will be easier for you to maintain the data in a single application. Every application needs to have the category dimension, mandatorily. So, you can use this dimension to maintain the actual and plan data.
Hope this helps.

Best way to declare and use internal table

Hi all,
As per my knoledge there are various techeniques (Methods) to declare and use the internal tables.
Please Suggest me the Best way to declaring and using internal table ( WITH EXAMPLE ).
Please Give the reason as well how the particular method is good ?
What are benefits of particular method ?
Thanks in advance.
Regards
Raj

Hello Raj Ahir,
There are so many methods to declare an internal table.
Mainly I would like to explain 2 of them mostly used.
1. Using Work Area and
2. With header line.
This with header line concept is not suggestable, because, when we shift the code to oops concept.. it doesn't work... Because OOPS doesn't support the Headerline concept...
But it all depends on the situation.
If you are sure that your program doen't make use of the OOPs concept, you can use HEADER LINE concept. If it invols OOPs use WORK AREA concept.
Now I'l explain these two methods with an example each...
1. Using Work area.
TABLES: sflight.
DATA: it_sflight TYPE TABLE OF sflight.
DATA: wa_sflight LIKE LINE OF it_sflight.
SELECT *
FROM sflight
INTO it_sflight
WHERE <condition>.
LOOP AT it_sflight INTO wa_sflight.
 WRITE / wa_sflight.
ENDLOOP.
In this case we have to transfer data into work area wa_sflight.
We can't access the data from the internal table direclty without work
area.
*<===============================================
2. Using Header line.
DATA: BEGIN OF it_sflight OCCURS 0,
 carrid LIKE sflight-carrid,
 connid LIKE sflight-connid,
 fldate LIKE sflight-fldate,
 END OF it_sflight.
SELECT *
 FROM sflight
 INTO it_sflight
 WHERE <condition>.
 LOOP AT it_sflight INTO wa_sflight.
 WRITE / wa_sflight.
 ENDLOOP.
In this case we can directly access the data from the internal table.
Here the internal table name represents the header. for each and every
interation the header line will get filled with new data. If you want to
represnent the internal table body you can use it_sflight[].
*<======================================================
TYPES: BEGIN OF st_sflight,
 carrid LIKE sflight-carrid,
 connid LIKE sflight-connid,
 fldate LIKE sflight-fldate,
 END OF st_sflight.
DATA: it_sflight TYPE TABLE OF st_sflight,
 wa_sflight LIKE LINE OF it_sflight.
This is using with work area.
DATA: it_sflight LIKE sflight OCCURS 0 WITH HEADER LINE.
This is using header line.
REWARD THE POINTS IF IT IS HELPFUL.
Regards
Sasidhar Reddy Matli.
Message was edited by: Sasidhar Reddy Matli
 Sasidhar Reddy Matli

Bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition

bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition the hard drive of iMac and install windows and also photoshop elements? which is the best alternative ? why?

A Photoshop Elements license is good for both Mac and Windows so it should be just a matter of downloading the Mac version and using your current serial number to activate it.
PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
If you have any problem with the activation contact Adobe support using chat... Start Here If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

Hi! I am using Snow Leopard 10.6.8, iTunes 10.6.3 on my Intel i3 iMac and should I purchase the latest iPad, would I be able to set up, synch and use it without iCloud? Regards Neil

Hi! I am using Snow Leopard 10.6.8, iTunes 10.6.3 on my Intel i3 iMac and should I purchase the latest iPad, would I be able to set up, synch and use it without iCloud? Also, would iWork files be interchangeable between the two bevices? And...could information from the Mac be transferred into iBooksAuthor? Regards Neil

You may need to update iTunes to iTunes 11 but you can do that running Snow Leopard 10.6.8. I would recommend running iTunes 11 anyway. It is a bit different in the user interface, but it works the same that it did in 10.6.3.
You can transfer iWorks files back and forth without iCloud but you will need to use file sharing with iTunes. However, you will have to purchase the iPad versions of those apps becuse the Mac versions will not work on the iPad if you were thinking about using the Mac apps.
You can read about file sharing here
iWork for iOS: About iTunes File Sharing
Sorry, but I know nothing about iBooks Author.

How can I download itunes when I get the following errors...have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up..ituneshelper did not install correctly error 7

How can I download itunes when I get the following errors ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
Any help greatly appreciated.
billymac

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Best setting for render and use in pc

Similar Messages

Maybe you are looking for