Best settings for export from FCE to Web

I'm trying to get a 20-minute project (audio and video) exported from FCE to iWeb in reasonably high quality. I've consulted the manual, and have tried various compression settings and consulted some online tutorials, to no avail - more often than not, if it "publishes" to iWeb, the resulting file looks like it will take the better part of forever to buffer. Any recommendations?

Well, not sure about what you mean “in reasonably high quality”...?
What export-settings did you use...? size and codec...?
A twenty minutes project for the web in reasonably quality...?
Did you start with your project in FCE with the best and highest uncompressed resolution ?
Did you export (compress) from this resolution once to your desired web format ?
Doing file compression properly, I guess, one needs years of experience...
There are far to many variables one has to consider...
t’s rather an art-form than exact science...
Anyway...
If you like, here are one of my settings:
Compression H.264 / Frame Rate Current / Key Frame Automatic / Quality Medium /
Data Rate Automatic (higher rate - higher file size) / Encoding Best Quality /
Size 480 x 270 (16:9) / Sound AAC Stereo 44.1 kHz (Mono and lower Rate reduces size).
Regards
Nolan

Similar Messages

Best codec for export from FCE?

Heya, I'm sort of a newbie, so please be patient with me
I'm trying to export a video from FCE using QT conversion. I'm going to be putting it on Youtube. What is the best codec for export? I've always heard that H.264 is the 'best', but my videos have always been pale and washed out. I tried exporting using MPEG-4 video, and it's not washed out. Is H.264 better and I should just deal with the paleness, or does it not matter too much?
Thanks

All the Web video sites re-compress your videos. So it's generally best to upload high quality files – typically determined by bit rate.
My suggestion would be to export as a Quick Time movie at current settings. (Guessing that you edited an AIC sequence,)
If you don;t have MPEG Streamclip, do a search and download it. In Streamclip, open the file you exported from FCE. Export to Quick Time. For Compression, choose H.264 from the drop down menu. Don't change Frame Size. If your movie is interlaced, check De-interlace. Check the Limit Data Rate box and type in 12,000 if the size of your movie is1080; 6,000 if your movie is 720; 3,000 if your movie is 480.
Use the YT uploader and you should be good to go.
Russ

Best settings for exporting from AE

Hi,
I am wondering what the best settings to export to from AE for editing in Premiere CS5.5. Previously I would digitize from tape and would export lossless .avi from AE but now I am using XDCAM EX 1080 50i sequence presets on Premiere and I wonder if I should amend the settings from AE or just keep them as lossless?
As always thanks in advance!

Keep it lossless.

Best Settings for Exporting DVD Footage in a Movie File

Hello,
I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
Here's an example of what I did recently with my own settings:
http://www.youtube.com/watch?v=qFV4sT7rHGs
I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
Thanks!

First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results

Whats the best settings for exporting a three camera youtube video on a mac book pro

I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

chucknoris501
What version of Premiere Elements are you using on Mac?
Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
hard drive for upload to YouTube at the YouTube web site.
ATR

Which are the best settings for exporting comps before edditing in Premiere Pro

Hello everyone!
As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
Let me explain: I have two comps in AE (intro and outro) and want to export them in Pr.Pro for edditing along with a fottage i shot.
When i render them the size of the files are huge (30 sec= 7GB).
Which is the best method (and settings) i can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without loosing any quality??
[Comp settings: HDTV 1080 29.97 (1920x1080)]
AE and Premiere Pro both CS4

If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
"FAQ: Why is my output file huge...?"
"FAQ: What is the best format for rendering and exporting from After Effects?"
By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects".

Best practice for exporting from iMovie '08 to iDVD

I am looking to find out what is the best practice for exporting from iMovie '08 to iDVD. I have read the other postings that give the basic howto (export to Media Browser then select the video in iDVD). However, my question is a little more technical. I have 1080i HD projects. I am interested in burning them to DVD in the best possible quality. What setting should I be using when I publish to Media Browser?
I am wondering about quality loss due to more than one conversion/compression. I suspect that when I export to the Media Browser then this is occurring. If I am not mistaken iMovie is using something like H.264 for this. Then, when I run iDVD I suspect it will it do another conversion/compression, I think to get to MPEG2. Not only could this result in a loss of quality but also it will take extra time. I am interested to know what others think about this.
Finally, I am looking to create DVDs for a lot of video. I am wondering if there are any USB or firewire hardware devices out there that could speed up the compression. I use the Elgato Turbo.264 when I want to encode to H.264 but I wonder if there is something similar for DVD creation.
Thanks in advance.

the standards for videoDVD are 720x480, and usually mpeg2 encoded..
so, your HiDef project HAS to be 'downsampled' somehow..
I would Export with Qucktime/apple intermediate => which is the 'format' your project is allready, and you avoid any useless 'inbetween encoding'..
iDVD will 'swallow' this huge export file - don't mind: iDVD cares for length, not size.
iDVD will then convert into DVD-standards..
you can 'raise' quality, by using projects <60min - this sets iDVD automatically to highest technical possible bitrate
hint: judge pic quality on a DVDplayer + TV.. not on your computer (DVDs are meant for TVdelivery)

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks

function(){return A.apply(null,[this].concat($A(arguments)))}
bmiller0525 wrote:
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks
thats way too vague of a question... best what? quality? size? playback?
best quality then use high bitrate, small size use low bitrate.

Settings for Exporting DVD Video to Web Pages

I have some short family dvd's that I want to export to some web pages.
What's the best method to :
1 extract the dvd content
2 create media for web viewing
BTW: I think I'd rather use MP4 with h.264 (rather than .flv) for this set of media
Q :
1 - what are the best apps for extracting from dvd and then encoding the MP4
(handbrake - quicktime - squeeze etc?) mac is preferred - or pc is ok too
2 - for the 'average' dsl/cable connection what are the best (safest) video frame sizes and bitrate settings ... I was thinking something like:
480x320 and bitrate xxxx?
or can I go as big as
640x480 and bitrate xxxx?
Thanks in advance for the help....

Do a Google search for DVD Ripper.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Best way to export from FCE for compression?

Hi again, folks!
I've read/learned that, when you plan to compress your video, you should ideally export from your editing program in the final resolution (size) that you want the video to be. Apparently this is because editing programs do a better job of sizing the video than do compression programs (such as Sorenson Squeeze, which does its best work doing only compression). What I'm wondering is this: When I export to QuickTime from FCE, I have two options, namely Export as a QuickTime Movie, or Export Using QuickTime Conversion (which allows me to save as a QuickTime or other format). So, my question is, if I Export Using QuickTime Conversion, does this actually "convert" the video to some 'bastardized' version of QuickTime, or does it just reduce the size? I'm asking because I don't understand why, on the one hand, FCE refers to exporting a full size video as simply "Exporting as QuickTime" while on the other hand (eg. when I'm lowering the resolution), it's called "QuickTime Conversion" (which is lumped in with a whole bunch of other output format possibilities such as .avi, mpeg4, etc).
I'm probably not being as clear as I'd like, but more simply put, why does FCE consider going from hi-res QuickTime to low-res QuickTime a 'conversion'?

One suggestion I received (just tonight) from another forum was to export the video from FCE, but not as a self-contained movie; this way (I'm told), the video is not being compressed or otherwise altered, and hence will give me the best results when I compress
The information you received on the other forum was half right and half wrong. The difference between a self-contained movie and a movie that isn't (known as a 'reference' movie) is NOT the quality; it's that the self-contained movie is an exact copy of what's in your Sequence while the reference movie only refers to the original media and renders ... it doesn't copy it. Since reference movies rely on the original media (and render files) for playback or when used in other applications (like Sorenson Squeeze), they will not work properly on any other system nor will they work if any of the original media or render files are moved, deleted or otherwise altered.
The quality of the two types is identical.
-DH

Best settings for exporting crisp video/graphic from iMovie to YouTube?

Hi, I am working on a video for a client and after viewing on YouTube they had some issues with the type not looking "crisp," and I'm not sure how to fix it, not sure if it's a YouTube thing or something I am doing wrong.
I am working in iMovie 6/HD on OS 10.4.11. I do my "type slides" in Photoshop and import them into the iMovie as photos (JPGs). I know some text/titles can be done in iMovie but there is very little control I have over what goes where, so by making my type slides in Photoshop I have more creative control to do what I want. I have done tests and it doesn't seem to matter what resolution the Photoshop files are when they're imported, the results are always the same.
If anyone has a better suggestion for doing the type slides I'd gladly welcome them, but I think what I really need to know is the following:
What are the best expert settings to export my iMovie file as, so that when I upload to YouTube, the quality stays fairly crisp? Or does YouTube's compression just negate anything I can do on my end?
I have googled and found settings recs on other sites and other boards and tried a bunch of them and my results aren't any better than my original effort.
From another post on this board I discovered I could play with the Filters setting when exporting, and I have set that to Sharpen and also used the Brightness filter to lighten the video (it was a little dark). I uploaded to YouTube and I think it is a little better, but would still love the info if anyone has a guaranteed rec for correct settings for YouTube video from iMovie HD/6.

Hello Brian,
Have you tried de-interlacing before exporting?
Sometimes, when I'm in a rush, I would expand the Canvas/Viewer (viewed at 100%), pick the clearest frame, and do a screen capture.
For example, with the captured image (in Photoshop), I have a marquee preset at 640x480 (NTSC). I created an action to crop, resize to 720x480, then set the Pixel Aspect Ratio to NTSC.
Gary

4K footage to DVD: what are the best settings for exporting in Premiere Pro CC v7.2.2?

Hello everyone!
I am editing a big bunch of short 4K clips (XAVC in MP4) which will then go onto DVDs. The idea is to get as many of those clips on a DVD as possible. Using Premiere Pro 7.2.2 on Windows 8.
What I would like to know is whether I'm actually using the best possible settings for this case, because the video exported to MPEG2-DVD doesn't look that good. Or maybe it needs to be exported to a different format and rather converted to DVD format after?
The sequence setting are the following:
RED Cinema
Frame rate: 29,97 fps
3840x2160 (16:9)
Square pixels
The export settings I've been using:
MPEG2-DVD
Aspect ratio: 16:9
TV Format: PAL
Field order: progressive
Frame rate: 25
Video quality: 100
Bitrate: VBR
1, I've tried different bitrates, also setting minimum at 9, but this blows up the file size too much (as i mentioned, the idea is to get at many clips as possible on a DVD)
GOP: M - 3, N - 15 (haven't touched those)
Multiplexer: none (should i put DVD?)
I'm using maximum render quality
Have I given all the information?
Any help will be appreciated!@

As Ann has advised do not expect too much, you are going down a lot in quality.
Why are you also going from NTSC to a PAL output?
Premiere will drop frames to get from 29.97 to 25.
PAL DVD players read NTSC discs fine as long as they are region 0
Why are you trying to produce a DVD anyway?
A Bluray would be far better quality.
Also a minimum 9 is way wrong, c9.6 is the max in the spec and hence avoided as your system is trying to push the spec limits to close.
I used to use 6 - 7.5 - 8.8 in my VBR and they looked fine, now I am all HD.

Best settings for exporting and dropping a MOV file into iDVD7?

I have a movie (originally shot in HD), made in iMovieHD6, and that I'd like to export and drop into iDVD7. *What settings would the brain trust recommend?* I cannot seem to get iDVD to render a good version through direct export from iMovie. (As a side, I wonder if it is because I started this process by bringing AVCHD files from my camera into iMovie8 and "going backwards" to iMovieHD6.)

I have used Pro-res from Final Cut Pro into iDVD and it works.
*This is from iDVD help menu:*
Video and image formats that work with iDVD
You can use these movie and graphic formats in iDVD:
◼
Most video or image files supported by QuickTime (see the list of unsupported QuickTime formats below)
◼
16:9 widescreen formats
◼
AAC, MP3, and AIFF audio files
◼
Any format from iMovie: DV, high-definition video (HDV), MPEG-2 SD, MPEG-2 SD, MPEG-4 SD, MPEG-4 HD, and AVCHD
High definition video is converted to work with the format of your project. iDVD supports using 16:9 widescreen video; therefore, when your DVD plays on a DVD player that supports widescreen format, the footage appears in its original aspect ratio.
The following video and image formats are not supported in iDVD:
◼
Copyrighted or protected videos.
◼
Movies saved in thousands of colors using the “none” compression setting in iMovie.
◼
48-bit color images (16 bits per color). To use source files in one of these formats in iDVD, save them in a supported format.
◼
Aurora uncompressed files. For best results, export Aurora clips as DV-format video before importing them into iDVD.
◼
QuickTime VR, MPEG-1 or MPEG-2, Flash, streaming or encrypted movies, or QuickTime spanned movies. You can’t add MPEG-1 or MPEG-2 files to an iDVD project because they don’t contain standard video tracks.
◼
QuickTime Fast Start movies. (Fast Start movies are intended for Internet playback.) When saving a QuickTime movie for use with iDVD, click the Options button in the QuickTime Export dialog and make sure that the “Prepare for Internet Streaming” checkbox is not selected.

Which settings for exporting from iMovie '09

I have a couple of projects coming up, and I'll be using a MiniDV camera (Canon XL1S) and a hard drive camera (Canon Vixia HG21).
For final editing I'm using iMovie 6 (still feel the most comfortable with it), but need to use iMovie '09 to import AVCHD footage from the HG21.
What are the best settings to use for exporting that footage out of '09 and into '06? I hate to lose major quality on the HG21, but don't really mind if it looks comparable to the XL1S. These projects are really demanding that I keep it at optimum HD quality (besides, I'm not sure if I have the HD space to work with the biggest files. Also, I don't plan on burn to Blu-ray or anything like that. I'm just needing to burn standard-definition DVDs, and plan on doing that with iDVD.
Basically I looking for advice on the proper quality settings for these needs, and also wondering if I'm looking at any issues regarding the different aspect ratios I'll be dealing with.
Thanks much…

Many thanks Lennart, and my apologies for a typo earlier when really confused you by leaving out one key word. I meant to say, "These projects are really (not) demanding that I keep it at optimum HD quality…"
I like your idea of pillarboxing the whole project, filling an entire widescreen TV with my Vixio footage. I assume the key is to open my new iMovie '06 project with the "DV Widescreen" setting, right?
Regarding how to convert AVCHD down to SD… I've been experimenting some with iMovie '09 on my intel-MacBook. Please tell me if I can forego the VoltaicHD purchase by doing this:
- I'm importing my Vixio footage into '09, choosing the "Large - 960x540" setting, just to keep the file size down.
- I'm then choosing Share>Export Movie, and again, I'm choosing the "Large" radio button.
- When the movie has exported, I'm seeing that it is saved with a .m4v extension. iMovie '06 will not allow me to drag a .m4v file into the clip pane. However, if I change the extension to .mov, I AM able to drag it in, and it appears that all is working ok.
What do you think? Is this workable? Am I sacrificing something with this method? Though I have not yet ripped anything to DVD, the quality seems good, (for SD standards, anyway).
One other question: Is it possible to export multiple clips out of '09 so that they can be brought into '06 individually? So far, all I'm able to do is to export them as one complete "movie," with all of my raw clips locked together. I'd like to have them separated when they arrive in '06. Maybe this is easy to do, and I just have not figured out this feature in '09.
Thx again…

Best settings for exporting to play in Windows Media Player on Powerpoint

I'm trying to export from FCP X by sending clips to Compressor 4.04 however the online lessons on lynda.com - my go-to source - and in Compressor manuals don't appear up-to-date with the actual latest revisions and I'm confused about whether to use QuickTime Export Components to get video that will play instantly in Windows Powerpoint either if its running on a Sony PC or being projected on a big screen (not HD).
Also lynda.com says 10,000 bit rate is best but the version used in the lesson limited one to 10,000 while the update goes past 30K. Which setting will work best for my purpose?
Some help on these settings for this novice Compressor user sure would help me make my deadline. My deliverable to a client is a collection of clips that play in the Windows Media Player. thanks
Compressor

Are you referring to a Lynda.com Compressor tutorial or one of their many PPT tutorials.
I agree that 10 Mbs is a nice general quality level – depending on your footage, of course – the content, the lighting, etc. WMV is probably the safest – although MP4 should be good as well,
Hard to be more specific except to say, Test. A preset that works well for one movie may look not-so-great applied to another.
Take a short, representative section and encode. Project the output file and see what you think.
Good luck.
Russ

Best settings for export from FCE to Web

Similar Messages

Maybe you are looking for