Best settings for exporting stills from video?

i've exported still frames to photoshop as tiff,jpeg,and photoshop format and still end up get those horizontal lines on the contours of some elements of the still-like the ones we see while reviewing a QT movie-i've been unsuccessful with the export options and resoerted to pixel correction to correct the problem--is there another way?--thanks

Hello Brian,
Have you tried de-interlacing before exporting?
Sometimes, when I'm in a rush, I would expand the Canvas/Viewer (viewed at 100%), pick the clearest frame, and do a screen capture.
For example, with the captured image (in Photoshop), I have a marquee preset at 640x480 (NTSC). I created an action to crop, resize to 720x480, then set the Pixel Aspect Ratio to NTSC.
Gary

Similar Messages

Which are the best settings for exporting comps before edditing in Premiere Pro

Hello everyone!
As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
Let me explain: I have two comps in AE (intro and outro) and want to export them in Pr.Pro for edditing along with a fottage i shot.
When i render them the size of the files are huge (30 sec= 7GB).
Which is the best method (and settings) i can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without loosing any quality??
[Comp settings: HDTV 1080 29.97 (1920x1080)]
AE and Premiere Pro both CS4

If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
"FAQ: Why is my output file huge...?"
"FAQ: What is the best format for rendering and exporting from After Effects?"
By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects".

Whats the best settings for exporting a three camera youtube video on a mac book pro

I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

chucknoris501
What version of Premiere Elements are you using on Mac?
Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
hard drive for upload to YouTube at the YouTube web site.
ATR

Best settings for exporting from AE

Hi,
I am wondering what the best settings to export to from AE for editing in Premiere CS5.5. Previously I would digitize from tape and would export lossless .avi from AE but now I am using XDCAM EX 1080 50i sequence presets on Premiere and I wonder if I should amend the settings from AE or just keep them as lossless?
As always thanks in advance!

Keep it lossless.

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks

function(){return A.apply(null,[this].concat($A(arguments)))}
bmiller0525 wrote:
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks
thats way too vague of a question... best what? quality? size? playback?
best quality then use high bitrate, small size use low bitrate.

Best Settings for Exporting DVD Footage in a Movie File

Hello,
I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
Here's an example of what I did recently with my own settings:
http://www.youtube.com/watch?v=qFV4sT7rHGs
I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
Thanks!

First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results

Best settings for exporting crisp video/graphic from iMovie to YouTube?

Hi, I am working on a video for a client and after viewing on YouTube they had some issues with the type not looking "crisp," and I'm not sure how to fix it, not sure if it's a YouTube thing or something I am doing wrong.
I am working in iMovie 6/HD on OS 10.4.11. I do my "type slides" in Photoshop and import them into the iMovie as photos (JPGs). I know some text/titles can be done in iMovie but there is very little control I have over what goes where, so by making my type slides in Photoshop I have more creative control to do what I want. I have done tests and it doesn't seem to matter what resolution the Photoshop files are when they're imported, the results are always the same.
If anyone has a better suggestion for doing the type slides I'd gladly welcome them, but I think what I really need to know is the following:
What are the best expert settings to export my iMovie file as, so that when I upload to YouTube, the quality stays fairly crisp? Or does YouTube's compression just negate anything I can do on my end?
I have googled and found settings recs on other sites and other boards and tried a bunch of them and my results aren't any better than my original effort.
From another post on this board I discovered I could play with the Filters setting when exporting, and I have set that to Sharpen and also used the Brightness filter to lighten the video (it was a little dark). I uploaded to YouTube and I think it is a little better, but would still love the info if anyone has a guaranteed rec for correct settings for YouTube video from iMovie HD/6.

Hello Brian,
Have you tried de-interlacing before exporting?
Sometimes, when I'm in a rush, I would expand the Canvas/Viewer (viewed at 100%), pick the clearest frame, and do a screen capture.
For example, with the captured image (in Photoshop), I have a marquee preset at 640x480 (NTSC). I created an action to crop, resize to 720x480, then set the Pixel Aspect Ratio to NTSC.
Gary

Best settings for export from FCE to Web

I'm trying to get a 20-minute project (audio and video) exported from FCE to iWeb in reasonably high quality. I've consulted the manual, and have tried various compression settings and consulted some online tutorials, to no avail - more often than not, if it "publishes" to iWeb, the resulting file looks like it will take the better part of forever to buffer. Any recommendations?

Well, not sure about what you mean “in reasonably high quality”...?
What export-settings did you use...? size and codec...?
A twenty minutes project for the web in reasonably quality...?
Did you start with your project in FCE with the best and highest uncompressed resolution ?
Did you export (compress) from this resolution once to your desired web format ?
Doing file compression properly, I guess, one needs years of experience...
There are far to many variables one has to consider...
t’s rather an art-form than exact science...
Anyway...
If you like, here are one of my settings:
Compression H.264 / Frame Rate Current / Key Frame Automatic / Quality Medium /
Data Rate Automatic (higher rate - higher file size) / Encoding Best Quality /
Size 480 x 270 (16:9) / Sound AAC Stereo 44.1 kHz (Mono and lower Rate reduces size).
Regards
Nolan

4K footage to DVD: what are the best settings for exporting in Premiere Pro CC v7.2.2?

Hello everyone!
I am editing a big bunch of short 4K clips (XAVC in MP4) which will then go onto DVDs. The idea is to get as many of those clips on a DVD as possible. Using Premiere Pro 7.2.2 on Windows 8.
What I would like to know is whether I'm actually using the best possible settings for this case, because the video exported to MPEG2-DVD doesn't look that good. Or maybe it needs to be exported to a different format and rather converted to DVD format after?
The sequence setting are the following:
RED Cinema
Frame rate: 29,97 fps
3840x2160 (16:9)
Square pixels
The export settings I've been using:
MPEG2-DVD
Aspect ratio: 16:9
TV Format: PAL
Field order: progressive
Frame rate: 25
Video quality: 100
Bitrate: VBR
1, I've tried different bitrates, also setting minimum at 9, but this blows up the file size too much (as i mentioned, the idea is to get at many clips as possible on a DVD)
GOP: M - 3, N - 15 (haven't touched those)
Multiplexer: none (should i put DVD?)
I'm using maximum render quality
Have I given all the information?
Any help will be appreciated!@

As Ann has advised do not expect too much, you are going down a lot in quality.
Why are you also going from NTSC to a PAL output?
Premiere will drop frames to get from 29.97 to 25.
PAL DVD players read NTSC discs fine as long as they are region 0
Why are you trying to produce a DVD anyway?
A Bluray would be far better quality.
Also a minimum 9 is way wrong, c9.6 is the max in the spec and hence avoided as your system is trying to push the spec limits to close.
I used to use 6 - 7.5 - 8.8 in my VBR and they looked fine, now I am all HD.

Best settings for exporting to play in Windows Media Player on Powerpoint

I'm trying to export from FCP X by sending clips to Compressor 4.04 however the online lessons on lynda.com - my go-to source - and in Compressor manuals don't appear up-to-date with the actual latest revisions and I'm confused about whether to use QuickTime Export Components to get video that will play instantly in Windows Powerpoint either if its running on a Sony PC or being projected on a big screen (not HD).
Also lynda.com says 10,000 bit rate is best but the version used in the lesson limited one to 10,000 while the update goes past 30K. Which setting will work best for my purpose?
Some help on these settings for this novice Compressor user sure would help me make my deadline. My deliverable to a client is a collection of clips that play in the Windows Media Player. thanks
Compressor

Are you referring to a Lynda.com Compressor tutorial or one of their many PPT tutorials.
I agree that 10 Mbs is a nice general quality level – depending on your footage, of course – the content, the lighting, etc. WMV is probably the safest – although MP4 should be good as well,
Hard to be more specific except to say, Test. A preset that works well for one movie may look not-so-great applied to another.
Take a short, representative section and encode. Project the output file and see what you think.
Good luck.
Russ

Need advice on best settings for a Quicktime compatible video

This is probably a simple question but I am getting frustrated trying to wade through all the settings.
I have a 12 minute video I put together from video that was shot at 1280x720 at 30 fps. All I'm trying to do is export it into a Quicktime friendly video. I see in the "Publish+Share" window, it has a "Quicktime: Use for email and playback on Mac" so I selected that. Then I'm presented with a bunch of video codec options. I've tried "H.264" and changed the Width and Height to "1280x720" to match my source videos. The aspect is set to "D1/DV NTSC Widescreen". But when I get the final video, there are black bars on all four sides.
So I'm hoping someone can suggest the proper settings to use so that my video is able to fill up the screen without black bars on all four sides and is Quicktime compatible. Thanks

farmerdwightks
If you have Premiere Elements 12 set for 1280 x 720 720p30 project, then, if you please look at the following choices of export
If you want QuickTime
Publish+Share
Computer
QuickTime
with Presets = NTSC DV 16:9
then under the Advanced Button/Video Tab of that preset, change the Export Setting to look like
I think that you were going in the right direction, but did not get all the necessary settings in place. Please compare my settings with what you were trying.
This will give you your 720p as H.264.mov.
You could also consider
Publish+Share
Computer
AVCHD
with Presets = MP4 - HD 720p24
and then under the Advanced Button/Video Tab of the preset change the Export Settings to look like
You could change the Bitrate Encoding to VBR, 2 Pass and other, but for now leave as is.
This will give you your 720p30 file as AVCHD.mp4.
Please review and then let us know if this worked for you.
Thank you.
ATR

Best settings for taking still frame pictures from video?

My project file has been converted to .avi and uses mp3 sound.
I like to take still shots from the action portions of the video,
but of the three options under frame hold: (hold on, deinterlace, and hold filters) which are the best to use?
are there other settings i should use when trying to unblur these images?
ps i searched the entire forum for a quick topic and came up empty.
Thanks!!!

Just pause your timeline on the frame you want and click the 'Freeze Frame' icon.
Select Export from the dialog box that shows. You now have your typical file save box - select Settings.
Now use the drop down on 'File Type' and pick your preferred format. For a lossless image use BMP or TIFF.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Best settings for exporting and dropping a MOV file into iDVD7?

I have a movie (originally shot in HD), made in iMovieHD6, and that I'd like to export and drop into iDVD7. *What settings would the brain trust recommend?* I cannot seem to get iDVD to render a good version through direct export from iMovie. (As a side, I wonder if it is because I started this process by bringing AVCHD files from my camera into iMovie8 and "going backwards" to iMovieHD6.)

I have used Pro-res from Final Cut Pro into iDVD and it works.
*This is from iDVD help menu:*
Video and image formats that work with iDVD
You can use these movie and graphic formats in iDVD:
◼
Most video or image files supported by QuickTime (see the list of unsupported QuickTime formats below)
◼
16:9 widescreen formats
◼
AAC, MP3, and AIFF audio files
◼
Any format from iMovie: DV, high-definition video (HDV), MPEG-2 SD, MPEG-2 SD, MPEG-4 SD, MPEG-4 HD, and AVCHD
High definition video is converted to work with the format of your project. iDVD supports using 16:9 widescreen video; therefore, when your DVD plays on a DVD player that supports widescreen format, the footage appears in its original aspect ratio.
The following video and image formats are not supported in iDVD:
◼
Copyrighted or protected videos.
◼
Movies saved in thousands of colors using the “none” compression setting in iMovie.
◼
48-bit color images (16 bits per color). To use source files in one of these formats in iDVD, save them in a supported format.
◼
Aurora uncompressed files. For best results, export Aurora clips as DV-format video before importing them into iDVD.
◼
QuickTime VR, MPEG-1 or MPEG-2, Flash, streaming or encrypted movies, or QuickTime spanned movies. You can’t add MPEG-1 or MPEG-2 files to an iDVD project because they don’t contain standard video tracks.
◼
QuickTime Fast Start movies. (Fast Start movies are intended for Internet playback.) When saving a QuickTime movie for use with iDVD, click the Options button in the QuickTime Export dialog and make sure that the “Prepare for Internet Streaming” checkbox is not selected.

Best settings for exporting in 1920x1080?

I am editing an HDV project and I was hoping to "export to movie" some of my sequences in full resolution (i.e. 1920x1080) in order to start a new project in which to assemble all of the sections. Although I will ultimately export in SD for DVD, I want to have a big 1920x1080 video file of the project to put on either DigiBeta or HDCAM for projecting in a theater.
Aside from the fact that it takes forever to export (over an hour for a minute of footage) I'm finding that there is a slight drop in quality and/or something "funny" about the exported movies - it's hard to explain other than to say that things aren't as clear.
The export settings that I am using are:
Microsoft AVI
Cinepak Codek by Radius
1920h 1080v
D1/DV NTSC Widescreen 16:9 (1.2)
Quality - 100% high
Recompress: Maintain Data Rate
LFF
Optimize Stills
Keyframe Every 15 frames
I know this is a bit of an inexperienced newbie question, so thanks in advance for your time.

>1920h 1080v - D1/DV NTSC Widescreen 16:9 (1.2)
The above two items are completely contradictory. It can't possible be both.

Best settings for Export

Hi--I have several slideshows I made for an event....I'm trying to figure out what the best output settings are if I want to create .mov or .dv files of them. They are 4:3, imovie 09..... to be played from a laptop on a HUGE screen.
I guess I'll then need to import them back into iMovie to make them run back to back for the show... and export again? I didn't want to edit them in one huge iMovie file because the timings would get too complicated (I thought).
Thanks for any thoughts you have

Try Export/Movie/ in HD (720P) size.
Also try Export/Movie/in Large size.
Anything else you try should be discarded unless it is visibly better than one of these.
One thing to try would be
FILE/EXPORT USING QUICKTIME
h.264
1920x1080
Bit rate of 8mbps or higher.

Best settings for exporting stills from video?

Similar Messages

Maybe you are looking for