Best Settings for Video to be used in Keynote

Hello all, I created a video that is being used as a component in a Keynote '08.
Am I safe with these settings?"
Quicktime, H.264
1024x768
Bitrate: 5000
Audio: AAC
Thanks,
Dan

if you're displaying video in flash, you should use flv or f4v files.

Similar Messages

What are the best settings for video compression if my end result is for use as progressive .flv

What are the best settings for video compression if my end result is for use as progressive .flv.?
Thanks,
KIM

Use the Final Cut Studio forum
http://discussions.apple.com/forum.jspa?forumID=939

Best practice for Video over IP using ISDN WAN

I am looking for the best practice to ensure that the WAN has suffient active ISDN channels to support the video conference connection.
Reliance on load threshold either -
Takes to long for the ISDN calls to establish causing the problems for video setup
- or is too fast to place additional ISDN calls when only data is using the line
What I need is for the ISDN calls to be pre-established just prior to the video call. Have done this in the past with the "ppp multilink links minimum commmand but this manual intervention isn't the preferred option in this case
thanks

This method is as secure as the password: an attacker can see
the hashed value, and you must assume that they know what has been
hashed, with what algorithm. Therefore, the challenge in attacking
this system is simply to hash lots of passwords until you get one
that gives the same value. Rainbow tables may make this easier than
you assume.
Why not use SSL to send the login request? That encrypts the
entire conversation, making snooping pointless.
You should still MD5 the password so you don't have to store
it unencrypted on the server, but that's a side issue.

Best Settings For Video Clarity?

What are the best settings to have the least amounts of blurry video? It bothers me that when people make any movements they are severely blurred. Can anyone help?

Hi
First start with on all ends set Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps
In ichats prefs click on video and change bandwidth limit to 500.
Restart iChat.
Tony

Best Settings For Video With Quick Movements?

The video project I'm working on contains a lot of quick movements. When I try exporting it into a Quicktime file, most of the video looks fine, but any of the quick motions have a strange choppiness to them that I've never seen before. The choppiness exists only in the isolated areas of the movement.
What settings would you recommend? I have tried numerous. Or has something gone wrong with my Final Cut Express HD?

Try the Deinterlace Filter on the dodgy bits. I can't promise it will work but it's worth trying.
Effects>Video Filters>Video>De-interlace.

Whats the best settings for exporting a three camera youtube video on a mac book pro

I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

chucknoris501
What version of Premiere Elements are you using on Mac?
Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
hard drive for upload to YouTube at the YouTube web site.
ATR

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks

function(){return A.apply(null,[this].concat($A(arguments)))}
bmiller0525 wrote:
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks
thats way too vague of a question... best what? quality? size? playback?
best quality then use high bitrate, small size use low bitrate.

Best settings for 4k video in Premiere Pro CS6

I am trying to nail this down. I have an (Asus G20AJ Series) ASUS i7 3.6 Ghz with 16GB RAM 64 bit. I now have a drone that uses 4k video. I am pretty sure I have the rendering down but I wanted to ask if you guys can suggest options for all the best settings for setup, playback and export of the video. My drone does video of 4096x2160 @23 fps. When I went to render the 6 minute file, wow, it was going to take more than 4 hours! Is this right? Any info you can suggest would be greatly appreciated!
Thank you!
Jeff
https://farm9.staticflickr.com/8805/17142255269_0702f8b8b0_k.jpg

4 hours sounds about right for this source material on such a system. Better hardware may be needed to reduce the exporting time or you have to convert the source material to a less demanding format.

What is the best converter for video files in mpeg, avi, wmv, mps, etc for imovie and what type of video files does the iMovie use? I recently purchased a MacBook Pro -version 10.10.1. I make movies, but the iMovie does not support my video files.

What is the converter for video files, to use in the iMovie? My files are mpeg, wmv, mts, avi, etc. I recently purchased a MacBook Pro - version 10.10.1.

AppGeeker will do the job.

Best Settings for Audigy 2 ZS Recording Out to S-VHS or DVD Recor

I?m recording some very machine intensi've video & sound to outboard devices. I'm using these outboard devices so that the recording process itself does not impact the demonstration performance.
Concerning the sound out, I?m using the line & 2 out of the card, and running it through a pro level audio board (Mackie) for any adjustments & monitoring before taking the line out of the board into the recording device. When returning the sound for monitoring, I?m also running from the external device directly to the board and directly from there to either headphones or control room monitors. Thus, I?m using the Audigy for initial sound generation. So far, I've not really made any ajustments at the board other than level or balance. I like to keep things pretty flat in recording.
I?ve looked around for recommendations as to the best settings for the Audigy card from its internal software for this situation, but find no ready reference. My concern is that I have the ?hottest? signal from this device, while being very concerned with audio quality. I?m looking for both ?punch? and ?clarity? of signal.
Is there a document or source that would give me this direction? While I can move from this SB card to other more studio based cards, I?d like to keep the demo product in line with what the actual target audience would have in their machines, and be able to replicate at their workstation.
For example, does the card function best at 00% (0db) output, or 50% (-5db) output?
Or some setting in between...most likely...
Or, is there some other setting I?m not aware of?
I have what I believe are the latest card drivers and software suite, XP Pro, with every possible OS and other machine hardware update available.
Thanks,
Rich

I?m recording some very machine intensi've video & sound to outboard devices. I'm using these outboard devices so that the recording process itself does not impact the demonstration performance.
Concerning the sound out, I?m using the line & 2 out of the card, and running it through a pro level audio board (Mackie) for any adjustments & monitoring before taking the line out of the board into the recording device. When returning the sound for monitoring, I?m also running from the external device directly to the board and directly from there to either headphones or control room monitors. Thus, I?m using the Audigy for initial sound generation. So far, I've not really made any ajustments at the board other than level or balance. I like to keep things pretty flat in recording.
I?ve looked around for recommendations as to the best settings for the Audigy card from its internal software for this situation, but find no ready reference. My concern is that I have the ?hottest? signal from this device, while being very concerned with audio quality. I?m looking for both ?punch? and ?clarity? of signal.
Is there a document or source that would give me this direction? While I can move from this SB card to other more studio based cards, I?d like to keep the demo product in line with what the actual target audience would have in their machines, and be able to replicate at their workstation.
For example, does the card function best at 00% (0db) output, or 50% (-5db) output?
Or some setting in between...most likely...
Or, is there some other setting I?m not aware of?
I have what I believe are the latest card drivers and software suite, XP Pro, with every possible OS and other machine hardware update available.
Thanks,
Rich

Need advise on best settings for FCP 7!

I am looking for some advice on the best settings for FCP 7 when I am syncing sound using pluraleyes, exporting into quicktime as one file and then importing that new file into FCP 7 for editing. I have noticed that sometimes my Quicktime files are very large (20 gb) and sometimes they are much smaller (130 MB), but I never changed the settings.
I am working on FCP 7 and shot using my Panasonic GH3 at 24 fps (which comes to 23.98). My frame size is 1920x1080. Compressor is H.264. Data rate: 8.6 MB/sec. Audio rate: 48.0 KHz. I have heard that FCP 7 does not properly deal with H.264. So, I am wondering, what should my settings be? Should I set to "Apple ProRes 422 (HQ) 1920x1080 24p 48 kHz"? Is there anything I need to know when I export to Quicktime 7 Pro in order to not reduce the quality of the video? Should I be changing my video files first before I even start to work on them?
I haven't edited in almost ten years so I am desperate need of some guidance!
Final Cut Pro 7, Mac OS X (10.6.8)

Hi Shane Ross,
Thanks for your help. So, I already synced all of my interviews in FCP 7 (using pluraleyes) before I changed the video to ProRess 422. Can I just go into FCP (in the same project) and compress the video footage, import the new video files and throw it into the timeline? Or will this cause issues? I tried this as a test and it seems to be okay but I just want to check that there aren't any issues that I am not considering.
Also, when I do compress, it seems to take forever (sometimes two hours). Is there any way to make this move along faster?
Thanks so much!

Best Settings for Exporting DVD Footage in a Movie File

Hello,
I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
Here's an example of what I did recently with my own settings:
http://www.youtube.com/watch?v=qFV4sT7rHGs
I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
Thanks!

First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results

Best settings for PP mov's?

Got a few videos SD 720x486 I need to export from FCP 7 (uncompressed timeline) for use in a Powerpoint - what's best settings for PP? mov, h264, audio at 44 or 48k, what? Should we keep them at full 720 size, probably?
Thanks
K

ON a Mac or a PC?
WMV for the PC but learning how to embed is a function of learning how to use Ppoerpoint, not FCP's tools.
H.264? Dunno, what does the manual for PP say about compatible movie filetypes?
If you are handing these movies off to an experience PP producer, they will be able to give precise specs. If your'e doing this yourself, give yourself some extra time to work out the screwups. We have two wiseguys who insist on doing their own PP instead of letting our PP wonks do the jobs. They have never been able to figure out how to embed or link to movies and they do not understand why we tell them to have the movines in the same folder as the PP files.
bogiesan

Which are the best settings for exporting comps before edditing in Premiere Pro

Hello everyone!
As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
Let me explain: I have two comps in AE (intro and outro) and want to export them in Pr.Pro for edditing along with a fottage i shot.
When i render them the size of the files are huge (30 sec= 7GB).
Which is the best method (and settings) i can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without loosing any quality??
[Comp settings: HDTV 1080 29.97 (1920x1080)]
AE and Premiere Pro both CS4

If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
"FAQ: Why is my output file huge...?"
"FAQ: What is the best format for rendering and exporting from After Effects?"
By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects".

Best settings for film based PAL to MPEG2?

There's a fair amount of useful information online regarding the best settings for film based NTSC footage export etc but I'm unable to find anything regarding the best Compressor settings for the export of MPEG2 from PAL video from a 25 frames per second film sourced master.
Can anybody help?

Okay, so after reading heaps of stuff on interlacing and progressive, my head is hurting. Since my 1080i50 Pal footage captures into Final cut interlaced and setting field dominance to NONE doesn't do much, I realise I need to de-interlace in an another application. Ken Stone has a great example of what to do in compressor though I dont have the current version (3) and am not sure how to reinterpret this for Compressor 2. I had a go without much luck. I am in the process of trying to use MPEG Streamclip to deinterlace and trying getting the right settings. Will see how that goes. I also have tried using JES deinterlacer but also wasnt sure about settings etc with this application either.
Which is the best to use and what settings should I set. I wish to use my footage for watching on our macs primarily and also from our mac server which is hooked up to our hdtv. I can then convert to other formats for iphones and web etc. But my main problem is this interlacing issue. I have a nice new HDV camera but it certainly isnt looking too much better atm than my old dv footage.
PLEASE help!

Best Settings for Video to be used in Keynote

Similar Messages

Maybe you are looking for