Best solution for data availability for end users --- reverse redirected folder and roaming profile

Roaming profiles and redirected folders do not seem to work for our environment. They often become troublesome and cause much help desk time and resources.
Is there a way to have a roaming profile and redirected folder configuration however have the local workstation have the primary copy and have the "server side" version be a backup?
This would seem to allow the user to have a constantly updated local copy and also have a backed up version on the enterprise server side available.

Hi,
I'm afraid there is no such function for saving the main copy on local side.
However if the sync of your roaming profile or folder redirection is not working well, it will still affect the result even if the function is available.
Also roaming profile is for "using same profile on different client computers", if the primary copy is on client it will not affect the purpose.
And for folder redirection it supports Offline Files so client should have a local copy when sync is not work.
If you have any feedback on our support, please send to [email protected]

Similar Messages

  • Which is the best reporting tools/sw available for J2EE based web app?

    Hi,
    I am looking for best reporting tools/sw available for J2EE based web application.
    Please help in this...
    Regards
    kundan krishna chakraborty

    Hi,
    maybe you can have a try RAQ Report. It is a powerful pure Java reporting tool which is very easy to learn.
    You can get the free version at http://www.raqsoft.com/.
    Good luck!

  • TS4006 Is there google maps data available for Chad, Africa ? I am trying to see where a relative is who works for an Non profit organization there, i have the privacy agreement to do so. In case they are kidnapped there, i would like to know the last pos

    Is there google maps data available for Chad, Africa ? I am trying to see where a relative is who works for an Non profit organization there, i have the privacy agreement to do so. In case they are kidnapped there, i would like to know the last position. I am getting an error that google maps is not available so i asusme there is no map data. Wout it be at least for such cases be possible to get longitude and latitude instead of nothing ?
    Thanks for ideas / suggestions

    Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

  • Function Module for data retrival for work order clearence (WCA)

    Hi All ,
      Function Module for data retrival for work order clearence (WCA) for a particular Planning plant and (WCD's).
    Thanks.

    Hi Anne,
    BAPI_PRODORD_GET_DETAIL
    BAPI_PRODORD_GET_LIST
    You can find further FM in Function Group COPRINT and CODR or take F4 on CO* in Function Group
    These will serve your purpose.
    Cheerz.
    Ram

  • [svn:osmf:] 11205: Fix bug FM-169: Trait support for data transfer sample doesn' t display bytes loaded and bytes total for SWF element

    Revision: 11205
    Author:   [email protected]
    Date:     2009-10-27 15:04:26 -0700 (Tue, 27 Oct 2009)
    Log Message:
    Fix bug FM-169: Trait support for data transfer sample doesn't display bytes loaded and bytes total for SWF element
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-169
    Modified Paths:
        osmf/trunk/apps/samples/framework/PluginSample/src/PluginSample.mxml
        osmf/trunk/apps/samples/framework/PluginSample/src/org/osmf/model/Model.as

    The bug is known, and a patch has been submitted: https://bugs.freedesktop.org/show_bug.cgi?id=80151. There's been no update since friday, so I wonder what the current status is, or if it's up for review at all.
    Does anyone know how we can be notified when this patch hits the kernel?

  • Asking for data connectivity for settings and Photo gallaery. Why?

    Asking for data connectivity for settings and Photo gallaery. Why?

    sounds good to me. suggest it here!
    apple.com/feedback

  • I have installed adobe reader onto my Mac but when I open up an adobe pdf it tells me that i need to accept the end user license agreement, quite, and then open up a new browser but i have never seen the end user license agreement. What should I do in ord

    I have installed adobe reader onto my Mac but when I open up an adobe pdf it tells me that i need to accept the end user license agreement, quite, and then open up a new browser but i have never seen the end user license agreement. What should I do in order to accept the end user license agreement even though it never pops up when i install adobe reader?

    Make sure Readr is closed. Go to the Applications form, look for the Adobe Reader icon, double click on it, and follow the lead. Restart Reader when finished.

  • HT201441 If the previous end-user passed away suddenly and did not leave the password word with anyone, how then can the device be wiped?

    My company issues iPads to certain staff for their line of work.  If the previous end-user passed away suddenly and did not leave their iCloud password word with anyone, how then can the device be wiped.  Currently we cannot turn off the iCloud, change the user, update the iOS, nor update our apps.  Can the local Apple Store assist in some way?

    I think Winston hit the nail.  I imagine the issue is you allowed the person to set up personal and private accounts on the device, not corporate controlled accounts.  As such, regardless of your ownership of the device, Apple will not release or change personal or private account-related information to you.
    Whether they would or not to a direct family member, I do not know, but I highly doubt they will (or legally can) do so to you as the employer for a personal account.
    I know such instances have come up in the past with things like company phones and such, both involving Apple as well as other companies.  The reported results in news articles were always that private information is private, and if companies want access or control, then they need to restrict employees use to only corporate provided accounts and services.

  • I tried to sinc my photos and i ended up deleting off my phone all the pictures.  i only ended up with one folder, and i cant figure out how to put rest of folders from my computer back on my phone.....help

    i tried to sinc my photos and i ended up deleting off my phone all the pictures.  i only ended up with one folder, and i cant figure out how to put rest of folders from my computer back on my phone.....help
    and on a second problem.  I need to know for sure that my contacts are backed up on my computer

    Create a parent folder on your computer to store the named folders of photos that you want transferred to your iPhone. Under the Photos tab for your iPhone sync preferences with iTunes, select the parent folder. All named folders of photos within will be transferred to your iPhone as separate folders or albums.
    Regarding your 2nd question, this should be easy. Your contacts should be available on your computer with or without an iPhone or any cell phone, which can be lost or stolen.
    Although contacts are included with your iPhone's backup which is updated by iTunes as the first step during the iTunes sync process, not a good idea to depend on this either since the iPhone backup includes a significant amount of other data. Contacts are designed to be synced with a supported address book app on your computer. With Windoze, this can be with Outlook 2003, 2007, or 2010 along with syncing calendar events and notes, or with the address book app used by Outlook Express with XP and by Windows Mail with Vista and Windows 7 called Windows Contacts for syncing contacts only.

  • DPM 2012 still requires put end users into local admin groups for the purpose of end user data recovery?

    On client computers that are protected by DPM 2010 and prior versions, you had to put the end users account in the local administrators group. If you did not add the end user account to the local administrators group you would get this error after opening
    the recovery tab in the DPM client: “DPM found no recovery points which you are authorized to restore on the specified DPM server. You can restore only those recovery points for which you were an administrator at the time the
    backup was taken. To restore other recovery points, contact your DPM administrator, or attempt to restore from another DPM.”  This is not ideal on many networks because the end users are not allowed to have local administrator access.
    Ths fix to this was included in hotfix 2465832 found here: http://support.microsoft.com/kb/2465832.
    This hotfix (a hotfix rollup package for DPM 2010) resolves other issues with DPM 2010 as well. You can find the full list of what this hotfix corrects on that link.
    One would think this issue should have been resolved in DPM 2012, however I am encountering the same exact issue, had to include end-users into the workstation local admin group before they can search for recovery points on the DPM server. This is not acceptable
    practice.
    Is there a new hotfix for the same issue on DPM 2012? I am hesitated to apply KB2465832 since it also includes many other fixes for DPM 2010, which may not appicable for version 2012.
    Please help.
    Thanks,

    This is a hands off solution to allow all users that use a machine to be able to restore their own files.
    1) Make these two cmd files and save them in c:\temp
    2) Using windows scheduler – schedule addperms.cmd to run daily – any new users that log onto the machine will automatically be able to restore their own files.
    <addperms.cmd>
    Cmd.exe /v /c c:\temp\addreg.cmd
    <addreg.cmd>
    set users=
    echo Windows Registry Editor Version 5.00>c:\temp\perms.reg
    echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection]>>c:\temp\perms.reg
    FOR /F "Tokens=*" %%n IN ('dir c:\users\*. /b') do set users=!users!%Userdomain%\\%%n,
    echo "ClientOwners"=^"%users%%Userdomain%\\bogususer^">>c:\temp\perms.reg
    REG IMPORT c:\temp\perms.reg
    Del c:\temp\perms.reg
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.
    That's a good one! Thanks for that.
    I've been scripting on KIX for some time, so here is mine, hope it helps to someone... (it's probably not the best, but it works)
    ========================================================================
    $RC=setoption("WOW64AlternateRegView","on") 
    $DPMkey = "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection"
    $uservariable = "%userdomain%\%username%"
    If KeyExist ($DPMkey)
    $Userstring=ReadValue($DPMkey, "ClientOwners")
    If $Userstring == ""
    WriteValue($DPMkey,"ClientOwners", $uservariable, "REG_MULTI_SZ")
    ? "Key created"
    else
    If not instr($Userstring,$uservariable)
    $Userstring = "$Userstring,$uservariable"
    WriteValue($DPMkey,"ClientOwners", $Userstring, "REG_MULTI_SZ")
    EndIf
    Endif
    EndIf
    ==========================================================================
    The problem actually is that you still need to use an admin account to write on the registry, so ensure you configure it properly on the schedule task.
    In case you use a service account on the schedule task... the "$uservariable" will get populated with that account. As a work around to this... I changed it for the following line:
    =========================================================
    $uservariable = ReadValue("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI", "LastLoggedOnSAMUser")
    =========================================================
    The only problem with that, is that key gets created/updated only if user gets logged phisically on that PC, but will not work for anyone connecting through RDP.

  • SP2013 WF works for admin but not end-users

    A simple SP2013 WF calls a SP2010 WF to send email, simple.  Works for me (admin) but when a SP user edits an item on the list (which fires the WF), the WF gets to the 2010 call, and fails with this error...
    RequestorId: f8c56627-e4e5-5a26-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"X-SP-SERVERSTATE":["ReadOnly=0"],"SPClientServiceRequestDuration":["61"],"SPRequestGuid":["f8c56627-e4e5-5a26-97ee-ad70ca4d3291"],"request-id":["f8c56627-e4e5-5a26-97ee-ad70ca4d3291"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["16.0.0.2930"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
    RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Wed, 25 Jun 2014 02:44:54 GMT"],"P3P":["CP=\"ALL IND DSP COR ADM CONo CUR CUSo IVAo IVDo PSA PSD TAI TELo OUR SAMo CNT COM INT
    NAV ONL PHY PRE PUR UNI\""],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]} at System.Activities.Statements.Throw.Execute(CodeActivityContext
    context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager
    bookmarkManager, Location resultLocation) Exception from activity Throw If Sequence Sequence TryCatch Sequence Microsoft.SharePoint.WorkflowServices.Activities.RetryForDurationPolicy HTTPPost_WorkflowInterop_EnableEvents WorkflowInterop DynamicActivity<Guid>
    Then If Working Sequence Flowchart Sequence RCSEmailCst.WorkflowXaml_4f7b53dc_968d_4e22_a812_3178e7b01bad
    Spent an hour on phone with M$ support, only to be told it's my fault and I have to re-design my WF...if my WF gets any simpler I'll have to use carrier pigeons to get messages to customers!
    I've Googled the error message, results suggest that User Profile Syn is out of whack but M$ support swears up & down our sync is working fine.
    Anyone?
    Edit to add: we have a hosted implementation of SP2013, NOT on-prem

    Hi  ,
    According to your description, my understanding is that the SharePoint workflow 2013 does not work for end-users in your environment.
    For your issue, it can be a permission for the user initiating the workflow. Please make sure  site feature Workflows can use app permissions is activated. Go to Site actions > Site Settings >
    Site features > Workflows can use app permissions.  Make sure the user is one member of a SharePoint Group.
    Also please  provide more detail information about the error message  to determine the exact cause of the error. You can have a look at the blog:
    http://ranaictiu-technicalblog.blogspot.com/2013/03/sharepoint-2013-workflow-debugdiagnosis.html
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • SAP Data Source for OmniPortlet available for download

    What are we Announcing ?
    The beta release of SAP Data Source for OmniPortlet.
    SAP data source for OmniPortlet makes it easier than ever before to integrate SAP R/3 systems with Oracle Application Server(OracleAS) Portal. With the new SAP data source, one can easily build SAP portlets including search for BAPI Function Modules and Business Objects, configuration of appropriate input and output parameters, filteration criteria, desired views and layouts, portlet personalization, and even portlet-to-portlet communication using parameters and events.
    How can I use it?
    SAP Data Source is a plugin data source for OmniPortlet. You can connect to any SAP R/3 server and declaratively build SAP portlets with ease. In addition to all the basic features of OmniPortlet, SAP data source leverages OracleAS Portal External Application for secure access to the SAP R/3 instance. SAP data source comes as a zip file, with very simple steps to configure. Learn more about this data source from http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDKRELEASE2/PDKHOME902/SAMPLES/SOLUTIONS/UPLOADAREA/SAPDS/VIEWLET/SAP_DS_VIEWLET_JAN05_VIEWLET_SWF.HTML
    How do I get it?
    This data source is available through the Portal Integration Solutions page on Portal Studio. You would be asked to enter your OTN user details to download the data source.
    Portal Integrations Page: http://portalstudio.oracle.com/servlet/page?_pageid=3191&_dad=ops&_schema=OPSTUDIO
    We are keen to service any issues that you might have while using this data source. Please post your feedback/concerns/issues on the "Portal Developer Kit" forum.
    Regards,
    Abhinav

    Hi,
    please find the below data source
    2LIS_03_UM - stock revaluation.
    2LIS_03_BF- goods movement.
    2LIS_03_BX- stock initialization.
    please find the below doc, it is helpful to you.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?overridelayout=t…
    Thanks,
    Phani.

  • Solution Manager Data Extraction for BW

    Hi,
    We have a Solution Manager in place for SAP Systems. Our requirement is to extract data from Solution Manager into BW and provide  BW Reports for Solution Manager Reporting & analysis.
    What are the standard DataSources/Extractors available in solution manager for this?
    What are the Business Contents (Infosources) available in BW?
    Any help will be rewarded.
    Regards
    Prasad

    Hi Prasad,
    have you already found the related IMG tree? It guides you through the setup.
    Transaction SPRO -> SAP Reference IMG -> SAP Solution Manager -> Scenario-Specific Settings -> Operations -> BI Reporting
    transaction: RSA5 (Installation of DataSource)
    -  0SM_SMG_ROOT                   Oberster Knoten Solution Manage
    -- 0SM_SMG                        Solution Manager
    --- 0SM_DSWPBI_DB390
    --- 0SM_DSWPBI_DB400                  DB400 Data
    --- 0SM_DSWPBI_DBADA                  Adabas Data
    --- 0SM_DSWPBI_DBDB2                  DB2 Data
    --- 0SM_DSWPBI_DBINF                  Informix Data
    --- 0SM_DSWPBI_DBMSS                  SQL Server Data
    --- 0SM_DSWPBI_DBORA                  Oracle Data
    --- 0SM_DSWPBI_MODUL                  Module Data
    --- 0SM_DSWPBI_PERF                   Performance Data
    --- 0SM_DSWPBI_SERVER                 Server Data
    --- 0SM_DSWPBI_SYSDATA                System Details Data
    --- 0SM_DSWPBI_SYSTEM                 System Data
    Best regards,
    Ruediger Stoecker

  • Advance Analysis for Microsoft Excel  How end user will use this  ?

    Hi ,
    I am working in Advance Analysis for Microsoft Excel Reporting tool,  Now i am working in my system , how the end user will interact with this report ?
    Is there any link is there , we need to send them  or they will also open this from the system only ??

    Hello Guru BI,
    Advance Analysis is only for micorsoft excel. You can check with your contact at SAP (TQM / Sales Representative) to check other solutions to have analysis on Web.
    For the Analysis Office the only way to have informations at the web is like described at the latest reply.
    For new solutions on web you can check the following links that have a brief describe of the web solutions:
    http://www.sap.com/solutions/sapbusinessobjects/large/business-intelligence/reporting-analysis/analysis-olap/index.epx
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e07439f8-ba1c-2e10-98a8-f8d552eb31ff?quicklink=index&overridelayout=true
    http://download.sap.com/download.epd?context=2D1D4DC34C0587B40660C12B4FD45C056D1BBE530E157D0EB6F2D54F126F520566AE5C5190940F14133BABCD0BF7DA7DCA12BBEC6228CDB1
    Thanks
    Diego Ferrary

  • How to filter compounding value when no data available for that field.

    Hi experts,
    I have a compounding value (Logical Procurement System) for an infoobject username which shows up in Bex when no data is available for that row. It shows up like this "compounding value/not assigned" instead of just "not assigned". I have put the compounding infoobject in the filter area and restricted that value/set to no display. still the compunding key/xxxxxxx. shows up. Any thoughts to fix this issue is appreciated.
    I looked into SDN threads..but no help. This issue is stopping me from moving reports to production.
    Let me know if you need any information in this regards.
    Thanks,
    SAPBWI

    Hi,
    Please add this compunding char in free char.Do not set it to no display
    -Vikram

Maybe you are looking for