Best/stable IOS for 7206 to support MPLS and L2TP/LNS

Hi.
I can see many versions of IOS that can support MPLS/L2TP/LNS for 7206.
But which is the latest recommended?
I am eyeing the following:
12.4.24T7(ED)
c7200p-advipservicesk9-mz.124-24.T7.bin
or
12.2.33 SRE6
c7200p-advipservicesk9-mz.122-33.SRE6.bin
Both released March2012.
Or should I go up to 15.1?
thanks

Hi Allan,
I would recommened moving to 15.1. Multiple bug fixes + lot of code changes are present between 124 - SRE and 15.1, particularly CEF, Multicast and QoS.
Regards

Similar Messages

IOS for 2801 having support for MPLS

Assalam o Alaikum,
Is there any IOS for 2801 router which has the support for MPLS?

Alaikum Al Salam,
Please use Cisco Feature Navigator to find information about Cisco IOS software images and the supported features for your platform(s) :
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Search by feature and choose MPLS, and then choose Cisco 2801 as the platform, you'll get a list of the IOSs that support MPLS on your platform, and please always check the required DRAM and Flash.
BR,
Mohammed Mahmoud.

Issue when update ios for 7206 router

hi all ,
the ios on router was 12.4
i put the ios
c7200p-adventerprisek9-mz.152-4.M5.bin
in disk2 , of router
and added
boot system flash disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin
after that ,
i restarted the router
i have the followign logs :
7200Gateway#reload
Proceed with reload? [confirm]
*Jan 11 15:24:11.469: %SYS-5-RELOAD: Reload requested by m0ulngateway on console. Reload Reason: Reload Command.
*Jan 11 15:24:11.681: %BGP-5-ADJCHANGE: neighbor 213.244.66.77 Down Peer closed the session
System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Socket jumper: not present Failsafe jumper: present = normal
FPGA revision 0x00000026
C7200 platform with 2095104 Kbytes of main memory
Readonly ROMMON initialized
Self decompressing the image : ################################################################################################################################# [OK]
%SYS-6-CLOCKUPDATE: System clock has been updated from 15:26:31 UTC Sat Jan 11 2014 to 17:26:31 Israel Sat Jan 11 2014, configured from console by console.
% No interface specified for interface_command
X121 address and queued type can not be configured on the same rotary group 1
%SYS-3-IMAGE_TOO_BIG: 'disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin' is too large for available memory (46143512 bytes).
%SYS-6-READ_BOOTFILE_FAIL: disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin File read failed -- Not enough space.
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
boot of "cisco2-C7200" using boot helper "bootflash:c7200p-kboot-mz.124-4.XD5.bin" failed
error returned: File read failed -- Not enough space
loadprog: error - on file open
boot: cannot load "cisco2-C7200"
System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Socket jumper: not present Failsafe jumper: present = normal
FPGA revision 0x00000026
C7200 platform with 2095104 Kbytes of main memory
Readonly ROMMON initialized
Self decompressing the image : ########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK]
*** No sreloc section
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 19:12 by prod_rel_team
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Installed image archive
Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
Processor board ID 13252317
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.0
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.
1 FastEthernet interface
3 Gigabit Ethernet interfaces
2045K bytes of NVRAM.
250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 512K).
Warning: The CLI will be deprecated soon
'enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Please move to 'enable secret <password>' CLI
max-reserved-bandwidth 95
   ^
% Invalid input detected at '^' marker.
Press RETURN to get started!
============================
focusing on the red lines above .
is there ANY THING WRONG ?????
AFTER THat i have sh ver :
7200Gateway#sh version
Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 19:12 by prod_rel_team
ROM: System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
7200Gateway uptime is 10 minutes
System returned to ROM by reload at 17:24:07 Israel Sat Jan 11 2014
System image file is "disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
Processor board ID 13252317
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.0
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.
1 FastEthernet interface
3 Gigabit Ethernet interfaces
2045K bytes of NVRAM.
250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
=====================
focus on bold line ,
did the router get the new iso without problems ????
wish to clarify
regards

You are right, whenever Cisco device boots, the IOS files gets loaded on the DRAM.
But in this process, some temporary files are also generated which gets saved in the flash/Disk, that’s the only reason you got these error messages. It’s not recommended at all to have less space in the Flash than what is recommended on Cisco.com. I would say please remove some files from Disk and have minimum 256 MB flash otherwise your router may drop into rommon mode at the time of next reload.
Well, it’s good to upgrade the bootstarp image too. Currently you are running 15.X IOS code, I would say run 15.X bootstarp image on the box.
You may download bootstarp image for 7206VRX NPEG2 from the link below:-
http://software.cisco.com/download/release.html?mdfid=282188585&flowid=1380&softwareid=280805685&release=15.2.4S4&relind=AVAILABLE&rellifecycle=ED&reltype=latest
If you want to know the procedure of the upgrade, click the link mentioned below:-
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf010.html#wp1017654
-Amant

More stable IOS for ME 3600-X

Hi,
Which IOS for ME 3600X switch better suits production deployment (more features, less known/unknown(by TAC) bugs, etc.) ? What are key differences?
The choice is between:
15.3-1.S
15.2-4.S2
wbr,
Alex
DAO21-RIPE

I've just finished upgrading to 15.3(2)S. So far so good. I'm happy with this.
WARNING: I don't remember which one, I'm suspecting it was 15.2(4)S, but if anyone is upgrading FROM THIS version to anything else, DO NOT use the command "archive download-sw" command. Here's what going to happen when you do:
1. Firstly, your CPU will spike so high, you'd think you just killed your appliance;
2. The entire download "process" will take 1/3 of the actual time and you'd mistakenly think the IOS upgrade has been completed. Well, NO IT HAS NOT.
If you look for the Cisco Bug Toolkit, it'll say that the workaround is "NONE". And I've sent a negative feedback about the accuracy of this workaround.
The REAL workaround is to use the "archive tar /x tftp:///IOS.TAR flash:" command. After the IOS extraction (/x) is done, you may delete the old IOS, change the bootstring and then reload the switch.

What is best operating system for the practice of EP and ABAP

Hi All,
I bought a new Dell laptop INS 1464 one week ago with Wndows 7.
Can anyone help me out which operating system would be best for using/practicing SAP EP and ABAP?
Regards
Divyanshu

Hi Divyanshu,
Windows operating system would be best for the practice purpose for installing SAP EP and ABAP.
Please check the Windows 7 Compability with the your EP and ABAP System.
http://service.sap.com/pam
http://service.sap.com/sap/support/notes/1347768
http://service.sap.com/sap/support/notes/1296463
Hope it helps
Regards
Arun Jaiswal

Which register cleaner or tune up software is the best to use for windows vista,windows 7 and windows 8.1 as professional?

hi,
I like to know wich register cleaner or tune up software is the best to use for windows vista- windows7- and windows 8.1.
I like to know the proffesional version of it which I can use for my clients every where unlimitted to clean unwanted keys of registry and improve performance.(specialy in Dutch language).
thanks
johan
h.david

I second what Kate Li said. There's no need for a registry cleaner! Don't do it! I run Windows systems for years and they keep running as light and fast as when they're new.
What I *do* recommend is regularly reviewing the list of programs set to run in the background using a tool to show you what starts in various ways called Autoruns, which can be found here:
http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
This tool can be used to disable things you don't need.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Best "Capture" workflow for projects mixing HDV tape and XDCAM footage

I'm trying to determine the best workflow for projects that combine XDCAM and HDV footage.
I'd obviously do the editing in a project designed for XDCAM, as that's the higher quality footage,
and render the HDV clips in the XDCAM timeline...ending up with an XDCAM end product.
I'd use SONY'S XDCAM TRANSFER to get the clips into FCP.
My question concerns capturing the HDV footage in this scenario. I've never been able to get
the Log and Capture feature for HDV footage to work, unless I've created an HDV project and am capturing into that HDV project.
So, generally, I create an HDV project, open the log and capture utility which is now set to capture HDV, and then capture the footage. I then close that project and create a new project, designed for XDCAM footage. I use XDCAM Transfer to get the XDCAM footage into the project, and I import
the previously captured HDV footage into that browser and start editing, rendering the HDV in the XDCAM timeline.
My question...do I really have to open, what is essentially a "fake" HDV project just to capture that HDV footage? You don't seem to have the option of capturing HDV footage (out of a camera or HDV tape deck) directly into an XDCAM project. If I try to change the capture or audio video settings of the XDCAM project to HDV, you get messages saying you can't do it.
Is there something I'm missing or a more streamlined way of doing this?
Thanks in advance for any input.

No need to jump through these hoops. Just set yourself up with a universal Easy Setup that will handle both. Choose your regular XDCAM HD Easy Setup then open the Audio / Video Settings window and change the Capture Preset to "HDV" and the Device Control Preset to "HDV Firewire" ... then click the "Create Easy Setup" button and save it for recall whenever needed.
Regarding the overall workflow, I'd seriously question the idea of creating XDCAM HD masters. No real benefit to that unless you need to export to XDCAM HD. Much better would be export your final master as Apple ProRes 422.
Best
Andy

Which ios for catalyst 4500 support wccp?

hi everybody
could you pls tell me, which ios I can use for 4500 series that could be support WCCP?
thanks

Hi
As per the datasheet WCCP is not supported in 12.2(25)SG which is the latest available code for 4500.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/ol_5184.htm#wp363642
But you can make use of AGM module which does supports as mentioned in product datasheet relased ..
http://www.cisco.com/en/US/products/hw/modules/ps2957/ps5288/index.html
regds

Best file system for PPC Mac, Intel Mac, and Win 7 PC

I really was nut sure which section to post this in, so this seemed like the best place. I have a 3TB external hard drive, that I need to read and write to on a G5 running 10.5.8, A MacBook Pro running 10.8.2, and various windows PC's, what is the best file system to use, or better yet, format, depending on what terminology you use, adn I need to transfer large files(larger than the 4GB limit on FAT). Im willing to try any suggestions. I would prefer not to use extra software, if it is neccessary though, I can on the mac's but not as easily on the Win PC's. I would also prefer an app from apple, I seem to have bad luck with third-party software, but if you know of one that works nicely, again, I'm willing to try any suggestions.

Another alternative is a two-partition external drive. All platforms supported without special software on one drive. You could use mnemonic partition names like HFS and EXF for mounted recognition. Think of this as a functional, single-drive, mirrored RAID set (RAID 1). A file copy to each partition (if needed) provides redundant platform interoperabililty and file backup.
HFS+ JournaledAll Macs
ExFat
Windows 7
Intel Macs

Best External Monitor for the DV SE 500 and what connections are needed?

Hello everyone.
What do people think is a good LCD monitor for the slot loader iMac? (I'm here in UK with access to PC world and Currys, etc,)
I've never looked but I'm sure from other posts that I will have a connector under a panel round the back somewhere.
I've seen monitors for sale at various prices ranging from £120 to £250. I've also noticed that some come with a HDMI (?) cable that seems to big for the connection port on my Powerbook so I'm wondering if the iMac's port will also need some sort of adapter. Are there such things as mini HDMI's and normal HDMI's and can a cable/adapter be bought to solve the problem?
I really wanted a Mac display but from posts elsewhere I find that these need digital connections and neither my iMac nor my 550 Powerbook has digital out.
So - I'm assuming I need a monitor with an analogue connection - possibly together with an adapter cable.
I'm thinking no bigger than 19".
I'm also wondering if I should try to find one with a resolution that matches both my Macs - is this possible? I know the Powerbook will run displays of several resolutions (millions of colours) in display closed mode but I'm not sure what the iMac will support.
I've seen monitors quoting 1280x1024 as something called a native resolution. Is this important?
What do people think/advise? Many of you will have hooked up an external LCD monitor to your iMacs and will have cracked all these issues.
Can you help with some info please?
Cheers to all, Russ

Russ,
1. The iMac G3 (>=400MHz) has a standard VGA port (15pin D-Sub) which is standard for analogue PC monitors.
2. New LCD panels will either have a newer digital DVI connection (which current Apple Displays use) and/or use the older analogue VGA connection for wider compatibility.
3. LCDs look sharpest in their native resolution. You can see this effect by changing the resolution down from the maximum on your TiBook. The display is still visible but less defined.
4. As the iMac G3 can only "mirror" the internal display on to the external you may wish to look for an XGA (1024x768) panel. However, the Powerbook Ti can display a wide range of resolutions (see the full list in this link) in either "mirror" or "dual-display" mode.
The issue here is that a display that makes full advanatge of your Powerbook's capabilties is overkill for an iMac G3's limited capabilites.
5. FYI, HDMI is a digital connection for Digital TVs. It is similar to DVI technology but carries sound data too.
6. Here's a large selection for well under £150 (link).
regards
mrtotes

Airport Extreme best practice configuration for Sleep Proxy, DHCP/NAT and PPPOE

Hi
I have recently bought a Airport Extreme and it is working well. One of the reasons I bought is to take advantage of the Bonjour Sleep Proxy on it so I can wake my MAC up remotely from my iPad using the REMOTE app to stream things like iTunes etc... I followed the set up instructions and basically let it configure itself. I have an ISP router / modem which currently is providing DHCP services, NAT and PPPOE.
The Airport detected all of this and set itself up as bridge only. The speed of the network outo to the internet is fine (more or less what it was before). However, in doing a bit of research, I have found out that if I want the Airport to act as a sleep proxy, I need it to "host" the network. I am not an expert in networking but from what I understand I need the Airport to be moved from "Bridge Only" to at least be providing DHCP to my internal network clients.
This has prompted me to ask what is "Best practice" when it comes to configuring the Airport given I want to have Sleep Proxy enabled. I think the two options I have are as follows but would really welcome feedback on which is the best option to go for or if there are other options I should be thinking of
(1) Have the Airport perform DHCP for my internal clients and leave the ISP router/modem doing NAT
(2) Have the Airport perform DHCP and NAT. I think to do this I need to turn the ISP router / modem into Bridge mode only. (I've looked and I seem to have this option on the device. It's an Irish ISP branded device but I think it is a Zyxel)
I have no reason to believe the ISP router / model is doing a bad job but given I understand the Airport Extreme is a reasonably high-end device (I think?) I am wondering if option 2 is the way to go.
In addition, during my research, I have also discovered that many people seem to have their Airport Extreme also handle PPPOE. This is currently being done by my ISP router/modem. I am inclined to leave it this way (following the mantra if it isn't broken, don't fix it) but if there was a good reason to have the Aiport do this, perhaps I should make the switch? Having said this, I have seen on this forum and others, some posts about problems with Internet connection drops when the Airport is handling PPPOE.
So, a bit of a long post, but if anyone has any information or perspective on this, I'd very much appreciate it.
Thanks
Dave

I forgot to thank you, John Galt. Yap, it solve my problem by restoring back the original firmware to 7.6.1. My unit is Airport Extreme 2012. I am still using double NAT because I cannot figure it out on how to set DHCP only in the Network tab.
My goal it to use the airport extreme to the internet and to share the internet to all my devices in the house. Just like my previous Accesspoints. Before I use AP+router Linksy$ WRT54G and D-l!nk DIR-655 without activating the NAT to share my internet connection and they work.
My problem is that when I set it to DHCP in the internet tab and DHCP in the Network tab in Airport Utility inorder to solve the double NAT situation, only one of all my devices (wired or wireless) can connect to the internet. Each time I connect the other device(s) to the internet my subscriber will verify my subscription (web browser based verification) in which I have to manually enter my account number, etc to validate my subscription.
So I stick to double NAT so that I can share the internet
Our broadband provider uses DHCP to link us to the internet. If I change the settings to Static in the Internet Tab, my broadband provider will not let me connect to the internet. In the Airport Utility if I set to static in the Internet Tab inorder to set it to solve the double NAT, a message box appear informing me that I have invalid beginning IP address in the DCHP range in the Network Tab when it appears that only the last 3 digits of the DHCP range is editable.
Is there any way of configuring the Airport Utility's Internet TAB to DHCP and Network TAB to DHCP to connect to the internet with all my devices without the double NAT and without the aid of another device such as AP or router or switch connected to the Airport or vice versa?

Best output option for video when doing adr and vocal recording?

I know this topic has come up before on occasion but I wanted to bring it up to hopefully reach a final conclusion.
Does anyone know the best configuration to use for ADR and other vocal recording in Logic when the mic and screen are in a separate room? The options I've seen so far are:
- Send video via DV firewire to a converter box and then to a monitor. With limited firewire ports already in use for the audio interface and dsp units, has anyone tried daisy chaining or using a firewire hub for dv output to a monitor?
or
- Use a DVI splitter to run to a 3rd LCD monitor(as a 2nd one is already in use) so the regular 'video window' could be dragged across to appear on the vocalist/actor's monitor.
These are the only choices I've seen seen so far but if anyone has any other's or recommendations on which of these to go for, I'd love to hear them.
Cheers
Paul

Anyone?

Best hardware configuration for photo editing in Aperture and/or Photoshop

I am looking to replace my existing iMac, and want to know best setup to handle photo editing. My current system (6 years old, 8GM RAM) does get bogged down some in Aperture.

photoshop and video edit rely mostly on memory and IO speed
a bit on cpu and less so on video chip (as those are useful mainly for 3d and mainly gaming 3d but a also a bit for pro 3d)
so SSD or hybrid would help
and 16GB mem
and you don't really need the max cpu model but midrage is useful

I've downloaded the update for the HP Support Assistant and now I cannot use it.

The message "An error occured" appears at the top and I cannot use the assistant. I've tried to unistall the assistant by going through the control panel and then to uninstall a program. I cannot do that either because I get the message that the item is on a network resource that is unavailable. I would like to uninstall the HP Support Assistant Assistant and then reinstall the new one with the update. Thanks.

Hi,
Try the following
First of all, see if you can uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
If this completes, restart the PC.
Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
After the installation, restart the PC again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

What is the Best Hard Drive for a Powerbook Pismo 200 and best size for sto

I have a Power book G3 Pismo 2000 which came with a 10 GB Hard Drive. It is almost full and I want to upgrade the Hard drive to a bigger and I do not know the best hard drive and what is the maximum space I will need? Can you recommend size and Manufacture?

I bought a 80GB Toshiba for my Pismo. It seems to work well. I believe the largest drive that will be fully recognized is a 120GB drive.
Here's a good place to see your options. Go to this web page at OWC and get a listing of your upgrade options for your Mac model.
http://eshop.macsales.com/MyOWC/index.cfm?StartOver=1&TI=5006
You can get the product models and specs, and shop around, but OWC has pretty good prices.

Best/stable IOS for 7206 to support MPLS and L2TP/LNS

Similar Messages

Maybe you are looking for