Best strategy to send faxes

Hello, somebody can inform me, as which is the best strategy to send faxes, with a SAP R/3 Enterprise? I have installed an Exchange Server and WinFax pro v8..
We need a third party software solution?
Thanks in advance...

Hello Alex,
I recently decommissioned the use of Winfax pro at my site. Winfax does not return confirmation messages back to SAP, so I was constantly getting end user requests to verfiy whether a fax did or did not reach its destination. In addition, I spent way too much time rebuilding the database every month or so.
My company implemented Venali's Intenet Fax Service last year. Here is a link: http://www.venali.com/solutions/integration/sap.php. This solution does not require you to maintain an in-house fax application solution; rather, you establish a VPN connection to Venali, then Venali registers their service in your SAP system's gateway. This solution has been extemely stable for us and extremely cost effective when you factor in applicaiton and server support and maintainance costs associated with an in-house managed solution. Venali charges a per page fee.
Check out the link above.
Jack Musselman

Similar Messages

HP LaserJet Pro 200 Color M276nw - Cannot Send Faxes via WIFI

Hi all,
I have a problem sending faxes from my laptop through the HP LaserJet Pro 200 Color M276nw printer.
I can send faxes from the printer device itself if i place a doucment into the feeder.
The problem exists when connecting to the all-in-one device via the WIFI, printing is fine and connection is active though when trying to fax a dcoument from my desktop utilising the FAX driver it complains about the printer being offline and cannot communicate to the all-in-one device?
any help would be appreciated.
Thanks
Jono

Hey @BSA_IT,
Welcome to the HP Support Forum.
I understand you're having an issue sending faxes from your PC through the HP LaserJet Pro 200 color MFP M276nw. I would like to assist you with this.
The following might help:
Click on Start / Devices and Printers
Double click on your printer's Fax icon
Click See What's Printing
Click Printer
If 'Use Printer Offline' is checked as you'll see in the screenshot below, be sure to uncheck it.
Next, try sending the fax through your laptop as before. If you run into the same issue, try the following steps to rule out Windows settings as interfering with fax sending capabilities:
Click on your Start menu
In the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboard
When the System Configuration Window opens select 'Selective Startup' and uncheck Load Startup Items
Click the Services tab. Check the box at the bottom for Hide All Microsoft Services
Select Disable All
Select Apply and OK
Restart your computer when prompted
Once the computer reboots, trying sending the fax.
To enable the programs after you've tested the machine, just open MSCONFIG the same way and under the general tab, just click 'normal startup' Hit apply and OK and reboot one final time
Please let me know the result of your troubleshooting by responding to this post.
Best of luck!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HP Officejet Pro 8600 won't send fax

My previous HP printer faxed fine. This one will not always connect even though it hears the fax tone. I'll get an error 322, and then I try it again and it connects. But now it sends 2 pages (I'm trying to send 3) then gives error 322. I have a phone with answering machine on this line - the same configuration has worked fine with past HP printers. I tried slowing down the fax speed - that has not helped. I ran the fax test and got all passes, and I sent a test fax to 1-888-hpfaxme and that worked fine (I got a response back). Could the problem be with the fax at the other end? (except that I have been faxing to this same fax monthly for years) Or with my phone and answering machine (I have Vonage which also includes voicemail and caller id, which *32 does not turn off). I've never experienced faxing being this hard.

Hi anthony2,
I see by your post that you are having issues sending faxes and have been getting a 322 error.
I can help you with this issue.
Keep in mind that you are using a VoIP line and voicemail which can cause issues.
A Analogue line is your best bet for using a fax.
Make sure you are using the 2 wire fax cable.
I have provided a document to go through the steps to see if it will help resolve this issue.
Fax Sending Fails Intermittently or Fails for Only One Recipient.
This information was provided from this document for Interpreting Error Codes in Fax Communication Error or Fax History Reports.
There was a communication error with the receiving fax machine due to poor telephone line conditions.
Set the receiving machine to receive at a slower transmission speed
If the session fails after sending several pages of a large document, resend the document as several smaller documents.
Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Send faxes through F110 and Interest Indicator

Hello all,
we have SAP ECC 6.0. , and it is needed to send faxes through F110 ,
1) I would like to know the steps to send a fax through the f110 transaction
2) Only send faxes for the vendors with interest indicator
3) Do you know some user exit to calculate interest with different interest indicators?
Regards
Olga

Hi Olga,
For customers, to use different interest rates, and calculate the interest amount in the payment file created by transaction F110, program RFFOBR_A, you need to:
1) Go to "Define Interest Calculation Types", in customizing (SPRO).
2) Go to "Define Reference Interest Rates" in customizing (SPRO).
3) Go to "Define Time-Based Terms" in customizing (SPRO).
4) Go to Enter Interest Values in customizing (SPRO).
After, go to the customer master data, Company Code data, folder account management and fill the field "Interest Indicato" with the code created in the step 1 above.
When you run the proposal, the payment file will have the interest amount calculated considering the billing amount and the interest rate defined to the customer.
Her in Brazil, we work in this way.....
I hope that this could help you solve your issue....!!!!
Best Regards,
Francisco Moya

Best Strategy for Integrating Crystal/Business Objects with OpenACS Environment

Post Author: devashanti
CA Forum: Deployment
I'm working for a client that uses AOL server and OpenACS for their web services/applications. I need suggestions on the best strategy to integrate a reporting solution using Business Objects XI. Ideally I'd like to send an API call from our web application's GUI to the Crystal API with report parameter values to pass into specific reports called via the API - I can get it down to one integer value being passed - or if this is not possible a way to seamlessly, from the end user perspective, move into a reporting module. We are using an Oracle backend database. I'm experienced with creating stored procedures and packages for reporting purposes.
Although I have many years of experience integrating the Crystal active X controls into n-tier client server applications, the past few years I have had little opportunity to work with Business Objects and the newer versions of Crystal or web based solutions with Crystal Reports. I signed up to try out crystalreports.com, but I doubt my client will find this solution acceptable for security reasons as the reports are for an online invoicing system we are developing. However we can set up a reports server in-house if necessary, so it gives me some testing ground.
Can anyone provide suggestions for a doable strategy?

Please post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there. Also, all BOE queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Ludek

Please help: Problem sending fax to one recipient using Apple USB Modem

Hello,
I'm using an Apple USB Modem to send an receive faxes on my PowerMac G5. This is working great to the most recipients, but not one with a Philips fax machine.
The problem is, that everybody can send faxes to him - except of me
I'm using a software called Pagesender for this, I e-mailed the support and he told me, that the my fax is timing out and some of his customers have made positive reports of Zoom and Best Data Modems in cases where the Apple Modems have encountered line noise.
Also the Tiger fax solution doesn't work ... The odd things are, that I could send faxes using a stationary fax machine and don't have problems to send faxes to others ...
Is there really no solution for this.
Best regards
René

Hello,
I'm using an Apple USB Modem to send an receive faxes on my PowerMac G5. This is working great to the most recipients, but not one with a Philips fax machine.
The problem is, that everybody can send faxes to him - except of me
I'm using a software called Pagesender for this, I e-mailed the support and he told me, that the my fax is timing out and some of his customers have made positive reports of Zoom and Best Data Modems in cases where the Apple Modems have encountered line noise.
Also the Tiger fax solution doesn't work ... The odd things are, that I could send faxes using a stationary fax machine and don't have problems to send faxes to others ...
Is there really no solution for this.
Best regards
René

7520 can send faxes but can not receive faxes

We just installed the 7520 and everything seems to work fine except receiving faxes.
We can send faxes just fine, however the strange thing is when I try to call the fax number from a phone it acts like its dead, you never hear it ring or anything then it just disconnects. If I switch the phone cord to the Ext connection in the back of the device and then call the number I can hear it ringing on the calling phone and on the 7520 device. The display lights up because there is an incoming call and shows that auto answer is on, but when it answers we never hear the normal fax type tones and it never connects.
The phone is being supplied by Time Warner Cable and it plugs into the cable modem. We called Time Warner and they told us that the line for the fax is an analog line but I have no idea how to check that or prove that.
I can't figure out why it will send faxes with no problem but seems like its a dead line when trying to receive a fax.
Any thoughts?
This question was solved.
View Solution.

With the printer's phone cord connected to the wall jack and the "1-Line" {nothing plugged into the 2-Ext} port, try running the Fax Test. See Step 5. Does everything pass?
Make sure the Distinctive Ring option is set for All Rings unless you have a distinctive ring set up with your phone service provider.
If you use a filter for your telephone, try using a filter for the printer.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Officejet 7610 unable to scan, copy or send faxes

My 3 days old officejet 7610 is @unable to scan, copy or send faxes' I parted with almost £200 to buy this to prepare for a very important job inteview next week. having followed some dicussions, I am sure somebody out there will help me today.
I have spent all the 3 days without sleep trying to fix this but to no effect.
thanks.
andy

Hi AndyKali11,
I understand you have an Officejet 7610 that is telling you it is currently unable to scan,copy or fax. I'm sorry to hear this and will do my best to assist you.
Essentially this error is telling you that the scanner itself itsn't functioning properly. I would suggest you start by following this A 'Scanner Failure' Message Displays on the All-in-One Control Panel and You Cannot Scan, Copy, or F... document and make sure to plug the printer directly to a wall outlet.
If this error persists I believe it may be a hardware defect inside the printer. In that case you can exchange the printer at the store, or contact HP Tech Support for your area and inquire about an in warranty replacement.
Hope this helps, have a great weekend!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Can send fax but cannot receive, fax test passed

Hello,
Today we tried to receive fax but it only showed "fax receive error". Fax test report shows everything is fine (all passed) and we can send fax without problems. What might cause this? Maybe fax number is wrong, but then we shouldnt be able to send it..
Telephone line only connects to printer.

Hi @reset5 ,
I see that you are experiencing issues receiving faxes. I will certainly do my best to help you.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
HP LaserJet Pro MFP M225dn, HP LaserJet Pro MFP M225dw, HP LaserJet Pro MFP M225rdn.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
I have provided some steps to try to see if this will help.
You can check the fax number by doing the following:
1. On the product control panel, select Setup button.
2. Select Fax Setup, Basic Setup, Fax Header.
Turn off the Private Receive.
1. On the product control panel, select Setup button.
2. Select Fax Setup, Advanced Setup.
3. Select Private Receive and then select off.
Turn off the Error Correction setting.
1. On the product control panel, press or touch the Setup button.
2. Select Service, and then select Fax Service.
3. Select Error Correction, and then select Off.
Increase the Fax Speed setting.
1. On the product control panel, press or touch the Setup button.
2. Select Fax Setup, and then select Advanced Setup.
3. Select Fax Speed, and then select the correct setting.
Update the printer's firmware if you are still having issues. HP LaserJet Pro MFP M225dw.
Select your operating system.
Sorry for all the questions, but it will help to resolve this issue quicker.
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using a filter?
Are you using the 2 wire fax cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using?
How to Find the Windows Edition and Version on Your Computer.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can't send fax from Laptop to printer Photosmart 7525

I'm unable to send fax's from this laptop to the fax at this time. Would like to know if malware or anti virus software could be the problem? It had been working in the past! I have malwarebites & panda cloud antivirus installed on this machine!

Hi centerfire,
Welcome to the HP forums!
I'm sorry to hear you've been having issues faxing, but I will do my best to help you out
Are you trying to send a fax to the Photosmart 7525 using the PS 7525 software on the PC?
If not, what program/app is it you're using to fax from your PC to your printer?
Are you able to use the fax on the machine (PS 7525) to send/receive to other fax machines?
Any other details you can provide would be great, and then I will do my best to offer some suggestions!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Voice gateway SPA8000 problem sending faxes.

Hello, I am a representative of the corporation Kazakhmys using the whole range of your devices. The problem is as follows: Voice Gateway Cisco SPA 8000 does not send faxes to voice gateway Grandstream GXW4232. The problem occurs only if the two voice gateways work with each other. The call comes to the SPA 8000, but after lifting the handset, the session immediately reset. What settings I need to change?

It seems you have RTP packet Size set to 30ms. It's not optimal even for voice call. You should not exceed 20ms for voice, for the fax I propose you to use 10ms.
Note it may not solve your problem, but it increase reliability of fax session.
But now back to the issue. If I understand correctly, the attached log has been captured on
Cisco-SIPGateway/IOS-15.2.4.M7
OK. It seem that most important line of such log is:
068963: Feb 24 05:50:16.778: //6170583/D6D178518A93/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x160DE9D8, Tag=0x0, Call Id=6170583,
Call Entry(Disconnect Cause=3, Voice Class Cause Code=0, Retry Count=0)
If I understand correctly the log, the call has been terminated by SIP Gateway.
I see no apparent issue with ATA8000 (not counting the Packet Size value mentioned on top). There is a problem with SIP Gateway. Unfortunately, I'm not expert on the matter nor this forum is best forum for question related to SIP Gateway. You should ask on IP Telephony forum instead.

Send faxes

dear all, i can not send faxes via the airport extrem modem...
the log file shows the following message:
efax v 0.9a-001114 Copyright 1999 Ed Casas. Compiled Aug 22 2005 06:55:25
efax: Thu Dec 22 15:10:09 2005 argv[0]=efax
efax: 10:09 argv[1]=-v
efax: 10:09 argv[2]=
efax: 10:09 argv[3]=-v
efax: 10:09 argv[4]=chewmainrxtf
efax: 10:09 argv[5]=-d/dev/tty.modem
efax: 10:09 argv[6]=-iZ
efax: 10:09 argv[7]=-i&FE0&D2S7=120
efax: 10:09 argv[8]=-i&C0
efax: 10:09 argv[9]=-iM1L0
efax: 10:09 argv[10]=-o1
efax: 10:09 argv[11]=-l
efax: 10:09 argv[12]=00493812526586
efax: 10:09 argv[13]=-kZ
efax: 10:09 argv[14]=-g
efax: 10:09 argv[15]=
efax: 10:09 argv[16]=-e
efax: 10:09 argv[17]=
efax: 10:09 argv[18]=-jS0=4
efax: 10:09 argv[19]=-w
efax: 10:09 argv[20]=-s
efax: 10:09 argv[21]=-r
efax: 10:09 argv[22]=%m%d%H%M%S
efax: 10:09 Error: can't open serial port /dev/tty.modem: No such file or directory
efax: 10:09 done, returning 2 (unrecoverable error)
any idea what´s wrong with by baby?
thanks, best regards: martin

There is nothing wrong. This is not supported by the AirPort Extreme base station (AEBS).
See your other thread "send faxes via the airport extrem modem".

Unable to send Fax

While I was able to send faxes in the past, suddenly I cannot. Now when I click print - send fax and fill in the info to send I get a "error while printing"message. The "modem" field in the fax dialog box reads "no fax selected" When I click "show fax list" the box is empty. I have gone to help, system preferences-print and fax, and searched the forum etc. without finding a solution. Any new ideas? Thanks. (I did recently perform my first "cleaning" operation with OnyX)

Is it showing up in Printer Setup Utility's Printer List or in Printer Setup Utility's Fax List?
Where are you seeing this checkbox and stuff? When I launch /Application/Utilities/Printer Setup Utility, I don't get any sort of windows with Internal Modem listed (in either the Printers window, where it doesn't belong anyways) or in the Fax window, with any sort of checkbox.
Or are you talking about System Preferences Print&Fax? I see checkboxes, but Internal Modem does NOT show up in the Printing List in my Sys Prefs' Print&Fax, and mine works. Yours must be mistakenly thinking its a printer and not a fax driver. Search your hard drive for Internal Modem or Internal Modem.app and tell me where you find it. Mine is in my User Library folder's Printers folder, along with HL-1440 series.app, which belongs to my Brother laserprinter. Other user accounts on my computer that have never sent a fax before do not have Internal Modem.app in their User Library folder's Printers folder.
Have you considered, in an act of desparation, to reapply the OS 10.4.10 combo update? If there are components of something missing from system software, or corrupted components present, that should reinstall them. Just remember to verify your disk before you start, and repair permissions both before and after you reapply the combo update. I would, however, be tempted to either delete this Internal Modem thing, or at least temporarily relocate it to your Desktop or something, before reapplying the combo update, and then recreate your SysPrefs Print&Fax Faxing setup, then do the FAX PDF stuff again from Text Edit.

Problem while sending FAX (Error Message 802 if checked in SOST)

Hi all,
I'm using FM SO_NEW_DOCUMENT_SEND_API1 to send Email and Fax through ABAP prog.
The Email is going fine but there is a problem in sending Fax, when i chek in SOST i get the following message.
Msg No 802 No delivery to 0091802299922, as recipient unknown.
This is my Fax No. +91 91-80-2299922
My selection screen is as follows
Email ID : External Email id
Fax No: 802299922 ( Passing Fax No in this format )
Country IND
The following is the code of my program, please show up some light on any mistake made in the same.
*& This is my Source Code
report z_email.
tables : somlreci1.
data : e_document_data like sodocchgi1,
e_document_type like soodk-objtp value 'RAW',
e_put_in_outbox like sonv-flag value 'X',
e_commit_work like sonv-flag value 'X'.
data : it_object_header type table of solisti1 with header line,
it_object_content type table of solisti1 with header line,
receivers type table of somlreci1 with header line.
data : i_lines type i.
select-options : s_mailid for somlreci1-receiver no intervals.
parameters : p_faxno type somlreci1-fax,
p_contry type somlreci1-country.
start-of-selection.
e_document_data-obj_name = 'Test'.
e_document_data-obj_descr = 'Email Test'.
e_document_data-obj_langu = sy-langu.
e_document_data-proc_type = '1'.
*--Information
it_object_content-line = 'This is a report used to send starts and'.
append it_object_content.
clear it_object_content.
it_object_content-line = ' stops to foreign distri. via E-Mail or Fax'.
append it_object_content.
clear it_object_content.
*--For Doc Size
describe table it_object_content lines i_lines.
e_document_data-doc_size = ( i_lines - 1 ) * 255 +
strlen( it_object_content ).
*--Email ID
loop at s_mailid.
receivers-receiver = s_mailid-low.
receivers-rec_type = 'U'.
append receivers.
clear : receivers.
endloop.
*--Fax
if p_faxno is not initial.
receivers-rec_type = 'F'.
receivers-fax = p_faxno.
receivers-country = p_contry.
receivers-com_type = 'TELFAX'.
append receivers.
clear : receivers.
endif.
*--Call function module
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_data = e_document_data
document_type = e_document_type
put_in_outbox = e_put_in_outbox
commit_work = e_commit_work
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
tables
OBJECT_HEADER =
object_content = it_object_content
CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =
receivers = receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8
if sy-subrc = 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
commit work.
wait up to 2 seconds.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
write :/ 'Message sent successfully..!'.
endif.
Regards,
Balavardhan.K

Hi ,
I am facing similar problem , in case you have a resolution about the FAX number , then please let me know .
Thanks,
Abhishek
([email protected])

Getting Errror Meassage No 802 while sending Fax

Hi all,
I'm using FM SO_NEW_DOCUMENT_SEND_API1 to send Email and Fax through ABAP prog.
I'm able to send to mail to External ID menwhile Fax is not going but getting thefollowing message if we the status in T-Code SOST.
Msg No 802 No delivery to 0091802299922, as recipient unknown.
This is my Fax No. +91 91-80-2299922
My selection screen is like this .
Email ID -
( Passign Email Ids)
Fax No 802299922 ( Passing Fax No like this )
Country IND ( Country)
What changes are required to send Fax in the below program .
*& This is my Source Code
report z_email.
tables : somlreci1.
data : e_document_data like sodocchgi1,
e_document_type like soodk-objtp value 'RAW',
e_put_in_outbox like sonv-flag value 'X',
e_commit_work like sonv-flag value 'X'.
data : it_object_header type table of solisti1 with header line,
it_object_content type table of solisti1 with header line,
receivers type table of somlreci1 with header line.
data : i_lines type i.
select-options : s_mailid for somlreci1-receiver no intervals.
parameters : p_faxno type somlreci1-fax,
p_contry type somlreci1-country.
start-of-selection.
e_document_data-obj_name = 'Test'.
e_document_data-obj_descr = 'Email Test'.
e_document_data-obj_langu = sy-langu.
e_document_data-proc_type = '1'.
*--Information
it_object_content-line = 'This is a report used to send starts and'.
append it_object_content.
clear it_object_content.
it_object_content-line = ' stops to foreign distri. via E-Mail or Fax'.
append it_object_content.
clear it_object_content.
*--For Doc Size
describe table it_object_content lines i_lines.
e_document_data-doc_size = ( i_lines - 1 ) * 255 +
strlen( it_object_content ).
*--Email ID
loop at s_mailid.
receivers-receiver = s_mailid-low.
receivers-rec_type = 'U'.
append receivers.
clear : receivers.
endloop.
*--Fax
if p_faxno is not initial.
receivers-rec_type = 'F'.
receivers-fax = p_faxno.
receivers-country = p_contry.
receivers-com_type = 'TELFAX'.
append receivers.
clear : receivers.
endif.
*--Call function module
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_data = e_document_data
document_type = e_document_type
put_in_outbox = e_put_in_outbox
commit_work = e_commit_work
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
tables
OBJECT_HEADER =
object_content = it_object_content
CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =
receivers = receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8
if sy-subrc = 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
commit work.
wait up to 2 seconds.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
write :/ 'Message sent successfully..!'.
endif.
Regards,
Balavardhan.K

Hi,
Check in Transaction SCOT whether Mail server, SAP Phone and other required connections are made if its not done then as the Basis or relevent person to connect it and try.
Thanks,
Prashanth

Best strategy to send faxes

Similar Messages

Maybe you are looking for