Best third party tool or other option to compress print jobs?
We have gone from W2k3 and Citrix PS4.5 to a W2k12R2 RDS environment. Most of the issues have been worked out and I have the majority of heavy printers printing via network shared printers that are deployed via Group Policy rather than Redirected printers
due to speed.
Even with using the non local redirected printers, printing is still slower than in the old W2k3/PS4.5 world. I have a user that batch prints a 100 documents a couple times of day and instead of processing 4 invoices per second it is now 1 per second. I
have Client Side Rendering turned off. I believe the compression that the Citrix Univeral print driver delivered was the reason for this superior performance.
What have others done that wanted to say good buy to ICA, but still wanted good printing speed?
Steve J.
Hi Steve,
Regarding print related queries, there is a Print/Fax forum where you would get more efficient support:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverprint&filter=alltypes&sort=lastpostdesc
Here are some related threads below for you:
print server options for a WAN
https://social.technet.microsoft.com/Forums/windowsserver/en-US/5afb018c-313b-45c6-b26b-9cb59518ed2b/print-server-options-for-a-wan?forum=winservergen
Remote Desktop Services Print redirect Compression level
https://social.technet.microsoft.com/Forums/windowsserver/en-US/293fb74c-f000-4419-9fcc-51ebbcb341e1/remote-desktop-services-print-redirect-compression-level?forum=winserverTS
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Similar Messages
-
I want to create a pop up calendar in adobe acrobat or any other adobe tool via adobe javascript in a PDF form .
I wish to create the calendar without any third party tool.
I found few options like formrouter and also pdf scripting.
But I was to create the calendar via pure Adobe Javascript. If no such option is there inbuilt pop up calendar control in any adobe tool to design the PDF form and afterwards save the same as PDF.All 3 of the options provide are all JavaScript. There is no plug-in used. You do need to place the JavaScript code text file into a special folder so that the menu and tool bar tools that allow execution of the JavaScript code and associate the pop-up calendar with a specific field.
-
Old third-party tool causing edit properties form to now load properly.
When our environment was SharePoint 2007 we had a third party tool that was used for indexing documents. Because of this it had a custom form to edit the properties of a list item or document. This add-on was removed from all of the sites prior
to upgrade to SharePoint 2013 - except for one that was overlooked.
Now when someone attempts to edit an item they are created with an error. I've tracked it back to trying to load this custom form to edit the properties and obviously that add-on isn't there any longer.
Does anyone have any suggestions to reset the edit properties form to the SharePoint default? It's not terribly convenient to recreate this list so I'd love to be able to make the change in-place as opposed to starting from the 2007 backup.
Thanks,
TroyHi Troy,
For resetting customized list forms from InfoPath forms back to default forms , you can take steps as below:
1.Located the list in question and use the ribbon to select List > List Settings.
2.On the List Settings page, select “Form settings” under “General Settings“.
3.Change the Form Option from “Modify the existing InfoPath form” to “Use the default SharePoint form“. If you want to completely remove the form, also check “Delete the InfoPath Form from the server“.
Reference:
http://sharepointadam.com/2012/04/24/reset-customized-list-forms-from-infopath-back-to-default/
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Third-party tools for solution manager
Hi all,
Im new for solution manager a i just want to know whats SM tools and whats the third-party tools integrate and interface with SAP Solution Manager and if will be more third party tools?? ( Whats the add on tools SM have??)
regards
TimHi Murali Narayanan
If you wan to achieve monitoring from technical perspective, the way that was introduced by shivjansi might be the option.
If you want to check the entry of specific table in stand alone MSSQL to ensure the business process that use MSSQL
stand alone DB, you can use BPMon remote DB monitoring that enables monitoring of non ABAP/ non SAP that supported
by netweaver like MSSQL, Oracle, DB2.
By using this function, you can monitor the entry of your stand alone SQL server.
For example, stand alone SQL Server has some table that contains some error,
or there is application table and in one row that it indicates error or completeness.
Now if you want to check these error document or incomplete document in the DB,
you can use BPMon remote DB monitor.
By monitoring this, you can ensure whether there is issue in your business or not.
You can find out how to setup from following link.
http://service.sap.com/bpm
->technical detail ->Setup Guide for non-ABAP/non-SAP
P14 (The monitoring object u201CGeneric Table Entry Counter for remote DBu201D (NATABCNX) )
is related description.
(In the document, it also introduce some other way using web service).
Also in same link, you can find out other document like how to setup BPMon.
Also there is some blog about table entry counter. it is for SAP ABAP system.
But the function is more or less same for remote DB.
So you can also check following blog to have more understandable image.
/people/volker.vongloeden/blog/2010/07/16/create-your-own-customer-specific-key-figure-for-business-process-monitoring-within-5-minutes
Best Regards
Keiji -
Does Microsoft support disks which have been converted from MBR to GPT with third-party tools?
Before opening a ticket with Microsoft to get the official response, does Microsoft support disks which have been converted from MBR to GPT with third-party tools?
We have various disks on Windows Server 2008 R2 fileserver cluster that are all MBR with various mount points added to overcome the 2TB limitation on MBR disks. Due to the time involved in physically moving the 30Tb+ of data to GPT disks, I would
like to investigate the option of a lossless conversion tool. Does anybody have any experience of these in production environments that could comment?
Any advice and details of experiences would be really appreciated!
CRM AdvisorHi,
Besed on my research, Microsoft supports a fileserver cluster if the disks have been converted from MBR to GPT using a third-party tool.
For more detailed information, please refer to the links below:
Convert MBR to GPT
https://social.technet.microsoft.com/Forums/en-US/3007346f-cf7b-4089-9628-36d394da8240/convert-mbr-to-gpt
Change a Master Boot Record Disk into a GUID Partition Table Disk
http://technet.microsoft.com/en-us/library/cc725671.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
CONNECT ORACLE11g database in sharepoint 2013 without using metaman or any third party tool
Hi!
I want to access ORACLE db and bring it as an external list in SharePoint 2013. How can it be achieved without using third party tools? So far i referred Creating
web service, .Net connectivity assembly or crafting the BCS xml model file manually are the techniques that can be employed to achieve. Can anyone share the code to create External content type and External list by adopting any one of the techniques.
Thanks in advance.Hi,
To connect SharePoint to your Oracle Database, you should use the BCS.
You will find here what is the structure of the XML File to create to access your Oracle DB.
http://msdn.microsoft.com/en-us/library/office/ff464424(v=office.14).aspx
Once you finished your BDCM, you will be able to import it with the following mehod :
http://www.manula.com/manuals/lightning-tools/bcs-meta-man-for-windows/1/en/topic/importing-the-bdc-model-into-sharepoint
The last step will be to create your external list from your BDCM.
http://msdn.microsoft.com/en-us/library/office/ee558778(v=office.14).aspx
Best Regards,
Frederic
Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful. -
Open hub Destinations - Third-Party Tools As Destinations
Dear all, below is the SAP Help process flow steps. I am quiet clear of all the steps except the APIs. Where do we define these APIs? When it says "You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction" where do I use it? Is it in the 3rd party tool? or is it in SAP BI.
If it is in 3rd party tool, where in 3rd party tool. Do I need to write as code ? or would I have an option in the 3rd party tool?
If someone can help me with Microsoft connector using Microsoft SQL Server 2008 Integration Services packages to SAP BI that would be helpful.
Where in Microsoft SQL Server 2008 Integration Services packages can I use/put this APIs? Any help Plzz
If it is in SAP BI where in SAP BI do I have to use these APIs? Any help is highly appreciated
Regards,
KK
Process Flow:
Extraction to the third-party tool can be executed as follows:
1. You define an open hub destination with Third-Party Tool as the destination type.
2. You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
3. You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
4. You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
5. When the extraction process is finished, the system sends a notification to the third-party tool using API RSB_API_OHS_3RDPARTY_NOTIFY.
6. The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
7. The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.It's been a along time since i worked with open hub, but here goes:
The Third Party tool needs parameters or switches to work correctly. Think of the old DOS commanda the "/a" "/b" suffix.
The APIs are simply a way to pass these parameters from the BW source to the Third Party target.
If your tool does not need them, don't worry about them.
John Hawk -
ASR netflow with third party tool
Hi ,
we have one issues where netflow data is not getting into the solar winds tool.in wireshark captures it shows netflow traffic is reaching upto the server.
found one forums and they highlighted one bug as below but its not affecting the release we are having.unable to find the exact bug ID in cisco .let me know if you can get any inputs and highlight the same.
below is the links and current details
https://thwack.solarwinds.com/thread/32146
current ASR version & related netflow config is attached.diesnt find any issue with the configuration .trying with another vendor tool as well and will check .
asr1002x-universal.03.10.01.S.153-3.S1-ext.SPA.bin
show ip flow export cache flow
IP packet size distribution (1317M total packets):
1-32 64 96 128 160 192 224 256 288 320 352 384 416 448 480
.000 .040 .023 .006 .004 .004 .030 .004 .002 .005 .004 .006 .002 .001 .000
512 544 576 1024 1536 2048 2560 3072 3584 4096 4608
.000 .000 .047 .029 .781 .000 .000 .000 .000 .000 .000
IP Flow Switching Cache, 0 bytes
0 active, 0 inactive, 24710853 added
417778 ager polls, 0 flow alloc failures
Active flows timeout in 30 minutes
Inactive flows timeout in 15 seconds
last clearing of statistics never
Protocol Total Flows Packets Bytes Packets Active(Sec) Idle(Sec)
-------- Flows /Sec /Flow /Pkt /Sec /Flow /Flow
TCP-Telnet 5 0.0 61 42 0.0 31.1 31.2
TCP-FTP 52 0.0 20 85 0.0 14.3 30.9
TCP-FTPD 8 0.0 71 51 0.0 3.6 31.1
TCP-WWW 369465 0.0 15 694 1.3 7.2 30.9
TCP-SMTP 417 0.0 84 98 0.0 5.8 30.9
TCP-X 3 0.0 7 277 0.0 1.6 31.1
TCP-BGP 10911 0.0 1 69 0.0 3.0 30.9
TCP-other 19793896 4.6 28 1134 131.5 2.6 30.9
UDP-DNS 320124 0.0 1 79 0.0 0.0 30.9
UDP-NTP 65307 0.0 1 87 0.0 0.1 30.9
UDP-TFTP 854 0.0 1 51 0.0 0.0 30.9
UDP-Frag 1721 0.0 7 58 0.0 2.1 30.9
UDP-other 3850147 0.8 192 1244 172.6 3.7 30.9
ICMP 296732 0.0 3 62 0.2 4.2 30.9
Total: 24709642 5.7 53 1193 305.8 2.8 30.9
SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP PktsHI Mike,
If you have third party Document Management System, then you can post two different message, i.e. service order in transaction details of the third party tool with link to document which would be posted to third party Document management server.
If you don't have third party document management system and what to use sap infrastructure, then you don't need to maintain attachment, maintain the link between the third party tool and SAP document repository, with some login utilities.
Best Regards,
Pratik Patel.
Reward with points if it is of any help to you! -
How to integrate DRM with third party tool for loading metadata in SQL table
Experts,
I am new to DRM and I have a requirement in which we want to integrate DRM with third party tool(lets say SQL table) as target and load metadata from DRM (Parent node, name , alias etc) to SQL table (same column name)
Is there any way we can integrate DRM to export the same to table directly instead to files. If yes what are the steps we have to follow.
Is there anyway we can customize DRM to execute queries or run batch
Can I have a basic example please.
Thanks in advance,
Regards,1. Use DRM Export to Table option, for that create an External Connection first for the Target Database and select the respective Tables to which you wish to Export the Hierarchy information.
2. You can perform most of the DRM Actions via the DRM_BATCH_CLIENT.exe.
Please refer to Using the Data Relationship Management Batch Client of DRM User guide.
let me know if you have any issues. -
How to Retrive data Form Third party tool & up lode in SAP
HI Friends,
My client was implementing sap & parlay .NET for HR module .
my client requirement was what ever amount he payed for Employees that should also uplode in sap.
In SAP he is treating employee as Vendor .
so please guide me how can I Retrive data from third party tool & how can i uploaded in sap .
Regards,
ReddyHi,
Third Party Tool must be having some features of downloading data in a format like Excel.
In SAP Side, this File is going to be your input...Now you can try different options:
1) Identify the IDOC that serves your purpose and populate the idoc and fire an Inbound IDOC.
2) Run a BDC for your relevant Txn Code by uploading the Third Party generated Excel data into an internal Table.
3) Use an Standard BAPI to upload data into SAP.
4) If possible, Use an SAP Provided Direct Input program to pump data in SAP.
You need to give the expected format of Excel to the Third Party user generating the Excel for you. -
Hi,
We have two GPO's with IE maintenance (Preference Mode Configured)
The settings it has are
1. Automatically detect configuration settings - Set to Enabled.
2. Automatic Browser configuration - Not configured.
We do not have proxy value set in IE through this GPO.
We have proxy set in IE through a third party tool (TPT) which updates the proxy at logon event 5 and 10.
Does Resetting Internet Explorer Maintenance settings from these GPO's also clear proxy set in IE by third party tool after the first GPO refresh.
I am sure the second time when the GP refreshes, the client won't find any IEM settings and hence there is no question of the proxy set in IE by TPT to erase. It is only the first time of the GPO refresh that I am concerned about.
Can someone please guide as I am planning to do the same in our production and concerned about the downtime caused due to the proxy being removed if at all for the first time.It will disable the proxy server option in Internet Options (untick the box), but will still store your proxy details.
Thanks
Ryan -
Convert TEXT or HTML to PDF in SharePoint 2013 Without Third Party tool
Dear All,
I want to convert the HTML content or TEXT or SharePoint list item to PDF file.
Scenario.
1) There will be a form where student will submit the Feedback / survey (custom survey , it's kind of objective question;s).
2) Then the Feedback / survey result should be sent in the PDF Format by email to the student once user submitted.
Without third party tool.
Please it's bit urgent ,
Thanks in Advance.
--MurthyHi,
Here is blog with the source code for your reference, you can refer the source code to customize your own solution to achieve your requirement.
http://www.codeproject.com/Articles/28050/Generate-PDF-Using-C
Best Regards
Dennis Guo
TechNet Community Support -
SAP tools and Third party tools
Hi SAP frinends,
I want to know some information of the tools. Now we are using CCMS tool to check the SAP Applications. Is there any tool either SAP or Third party tool to check SAP applications and system perfomance Grafically. We are looking for grafical mode tool. Which tool is better to check running application on SAP systems. Please give your advices for me......
Best regards,
Prasanna.Hai,
CCMS is the best way to monitor your SAP applications, SAP has introduced lots of things to encourage use of CCMS for system monitoring. You can Install agents to monitor your systems. If you have a CEN system (SOLMAN) then you can Install agents in all the satellite systems and monitor all the satellite systems from CEN. You can also monitor the availablity of the satellite systems from CEN using CCMSPING agent.
For checking the Performance of the system if you have only ABAP stack then you can use ST03N where you can get the graphical representations as well. For JAVA stack you can use Eclipse which is a tool from SAP.
Check the below link.....
http://www.basisconsultant.com/blogs/91-tips/264-an-experience-with-java-memory-analyzer.html
Regards,
Yoganand.V -
Integrate third-party-tool with service desk (SOAMANAGER)
Hello,
to activate the web service for interface between service desk and third-party-tool I have to use transaction SOAMANAGER. My problem is that I can't find any documentation about this transaction belonging to the mentioned interface.
Has anybody experience how to activate and test the web service with SOAMANAGER?
Best regards
KlausHi Santosh Asuthkar,
thank you for your answer.
I've already read the steps in trx. spro and several documentations in sdn.
There was a hint to trx. ictconf, wsconfig, lpconfig, wsadmin. If you call these transactions there
is a message that these trx. are old and trx. SOAMANAGER should be used.
Question is how to activate the webservice "ICT_SERVICE_DESK_API" in SOAMANAGER.
I've never handled with bindings and proxy classes.
Best regards
Klaus -
Third party tools for Usage Reports at list&library level
Hello,
We are looking for a Third party tool which gives usage analytic reports(preferably with
dashboards) with specific Time Stamps at list (Item) &library (Document) level.
Thanks for your help in advance.. :-)you can try couple of available 3rd party option( i would say test it with trial version).
Webtrends for SharePoint
CARDIOLOG ANALYTICS
DocAve Report Center for Microsoft® SharePoint® Reporting
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
Maybe you are looking for
-
Automatic creation of transportation lane between two Plants or location
Hi, I am aware that when we cif Inforecords from R/3 to APO new transportation lanes automatically gets created between the Plant and Vendor. The isssue which i am facing is that i want transportation lanes to be created between two plants . The TL s
-
Error code 801812E0 in reset process - Lumia 800
I received notification of the most recent firmware update, so inevitably I chose to upgrade. I connected it to my computer and ran the update and things seemed fine until I tried to text somebody and it would kick me back to the main messages menu,
-
The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signa
-
Updating Thai characters for CMIR at header nad Item Level In LSMW
Hi Experts, We are in the process of Upadting Thai characters for CMIR in VA22 transaction Using LSMW. In that We have used BAPI_CUSTOMERQUOTATION_CHANGE to Update the Thai Characters. The text which i am updating gets updated in va22 when the length
-
Accessing a flat data file from within a session bean
Hi I want to access a csv file (output from an excel file) to populate my database at the start of an application. I nonchalently tried to create a BufferedReader/FileReader to open the file, and dropped it in with my classes in the deploytool. What