Best tracing parameter for CheckIn.wsdl

Hi Experts :
Could anyone suggest the best tracing parameter getting the detailed tracing log while checkin the documents from BPEL that Invoke CheckIn.wsdl that calls service : CheckInUniversal.
J

Loginto UCM go to Administration --> System Audit information
check full Verbose
from drop down select servives, schema, idoc and reqaudit
and hit the server. You should be able to get some decent enough logging.
regards,
deepak

Similar Messages

  • Best parameter for passwd cache in nscd.conf

    Hello,
    I'm looking for the best parameter for passwd cache in nscd.conf for a mailserver.
    Our environment:
    SunFire V240, Solaris 9, 2GB Memory, 2 CPU
    about 5000 users in an OpenLDAP 2.1.x-Directory
    pam_ldap, nss_ldap (PADL)
    The users must authenticate for IMAP, POP and SMTP_AUTH (about pam_ldap) against the local LDAP-Server and the SMTP-Server also looks there for local accounts.
    It seems, that the time to authenticate (and e.g. directory listing) takes too long at the first access. The second time the access is faster and I think, it has to do with the nscd cache.
    But, which values are right for the passwd cache for such an environment?
    Any hints are welcome!
    Thanks,
    Heidrun Schmidt

    The man page for nscd.conf gives some performance enhancing suggestions.
    Also, What is your cache hit rate on the LDAP server? In Sun ONE, I have to increase the slapd cache size for large environments. Also, is the LDAP configured for the correct indexes?
    Are you sure the mail server processes use the UNIX auth mechanism or do they query the LDAP directly (ala Sun ONE iMS)? If they query LDAP directly, then nscd is bypassed.
    HTH,
    Roger S.

  • Modifying Memory Optimization parameter for BPEL process in SOA 11g

    Hello
    I have turned on memory optimization parameter for my BPEL process in the composite.xml (11g)
    this is what I have in composite.xml:
    <property name="bpel.config.inMemoryOptimization">false</property>
    How do we modify this parameter in the EM console at runtime? I changed this property to "true" using the System MBean browser, but it wasn't taking effect. I thought the SOA server must be restarted (similar to what we used to do in 10g). But when I restart the SOA server, the parameter goes back to whatever the value was in the composite.xml ignoring the change I made in the System MBean browser
    Please share your thoughts.
    Thanks in advance.
    Raja

    Deploying a newer version is not an option, as the endpoints could change (not sure if it would in 11g, but in 10g it does) and also, our service consumers will be pointing to the older version.As mentioned above, if clients are using URL without version then call will be forwarded to default version of composite internally. No manual tweaking required for this. Just make sure that while deploying the new version you are marking it as default.
    Besides, we report on service metrics and having multiple versions just complicates things.Not at all. If you are not using versioning feature, you are really under utilizing the Oracle SOA 11g. Remember that metrics can be collected for a single composite with same effort, irrespective of the number of composite versions deployed. Only few product tables refer the version while storing composite name and rest all use only the composite name without version. I do not know how you are collecting service metrics but we use DB jobs for same it works perfectly with any number of composites having multiple versions deployed.
    The idea is to do some debugging and collect audit trail in case there is a production issue by disabling inMemoryOptimization parameter. This is a live production environment and deploying whenever we want is not even an option for us, unfortunately. Why not debug by increasing log level. Diagnostic logs are the best option to debug an issue even in production. For getting audit trail you may re-produce the issue in lower environments. I think no organization will allow re-deployments just for debugging some issue in production until and unless it is too critical issue to handle.
    Does this not supported in 11g? if it isn't, it does seem like a bug to me. You may always go ahead and raise a case with support.
    Regards,
    Anuj

  • Communication error when calling web service for checkin and checkout files

    Hello,
    I am trying to checkout  and also to checkin files within the DMS via web service. The files are stored in the VAULT (=TRESOR) without the data server parth and DVA computer.
    For checkout:
    Original zum Ändern auschecken
      CALL FUNCTION 'BAPI_DOCUMENT_CHECKOUTMODIFY2'
        EXPORTING
          documenttype    = pi_documenttype
          documentnumber  = pi_documentnumber
          documentpart    = pi_documentpart
          documentversion = pi_documentversion
          documentfile    = lf_documentfiles
          pf_http_dest    = ''
          pf_ftp_dest     = ''
        statusextern    = lf_status
        IMPORTING
          return          = lf_return
          checkedoutfile  = ls_checkedoutfile.
    and for checkin:
    Dokument einchecken
      CALL FUNCTION 'BAPI_DOCUMENT_CHECKIN2'
        EXPORTING
          documenttype    = pi_documenttype
          documentnumber  = pi_documentnumber
          documentpart    = pi_documentpart
          documentversion = pi_documentversion
          hostname        = ''
          statusintern    = ''
       statusextern    = lf_status
          statuslog       = ''
        IMPORTING
          return          = lf_return
        TABLES
          documentfiles   = lt_files.
    But it is not working cause I always get a 'communication error' from the function CV120_FTP_START_REG_SERVER when calling one of these BAPIs via web service:
    IF pf_check_gui = 'X'.
        CLEAR: gf_gui_exist,
               gf_gui_checked.
        CALL FUNCTION 'RFC_PING'
             DESTINATION 'SAPGUI'
             EXCEPTIONS: communication_failure = 1 MESSAGE lf_msg_text
                         system_failure        = 2 MESSAGE lf_msg_text.
        IF sy-subrc = 0.
          gf_gui_exist = 'X'.
        ELSE.
          CLEAR gf_gui_exist.
        ENDIF.
        gf_gui_checked = 'X'.
      ENDIF.
    Afterwards the following function is called where I got the error 'Program no longer started via RFC. No return possible.':
    -> Vault with DVA -> ** Start FTP on the client
      CALL FUNCTION 'SYSTEM_START_REG_SERVER'
           EXPORTING: progname    = 'sapftp'
                      startmode   = ''                          " X
                      exclusiv    = 'Y'
                      waittime    = 500
                      startcomp   = 'C'    " G=gui, C=RFC
                      startpara   = ' '
          IMPORTING: err_code    = lf_errno
                     err_mess    = lf_error_msg
                     destination = pfx_destination.
    Regards
    Jens

    Hi! As mentioned below I had the same problem.
    There are two notes concerning security setting of the SAP Gateway:
    1069911 - GW: Changes to the ACL list of the gateway (reginfo)
    1480644 -  gw/acl_mode versus gw/reg_no_conn_info
    Your basis team should check if the Gateway settings allow external programs to register on the gateway.
    Best regards
    Dominik

  • [Reports]   The best reporting tool for JDeveloper 10g

    Hi,
    Which is the best reporting tool for JDeveloper 10g: JasperReports, Crystal Reports or something else? I want to build parametric and rather complex reports but I don't know which tool offers more features, flexibility, ease of use , ... . I've built some simple parametric reports using JasperReports and JDeveloper 10g but I think it's not so productive and may need something more, maybe iReport. Does anyone have any ideas?
    S/\EE|)

    Hi Saeed,
    I'lm using Jasper too, and here is an example of how i pass to it some variables:
         <parameter name="theWantedId" isForPrompting="false" class="java.lang.Integer"/>
         <queryString><![CDATA[SELECT field1, field2 from table1 WHERE table1.field1 = $P!{theWantedId}]]></queryString>And in a bean (or other java code from which the template is called)
            Map parameters= new HashMap();
            parameters.put("theWantedId", findSelectedId()); // return the ID of the object to print
            JasperDesign design =
                JRXmlLoader.load(myTemplate); // First load template from the Blob table in an inputstream
            JasperReport report =
                JasperCompileManager.compileReport(design);
            InitialContext initialContext = new InitialContext();
            DataSource ds = (DataSource)initialContext.lookup("java:comp/env/jdbc/MYDATASOURCEConnectionDS");
            Connection conn = ds.getConnection();
            JasperPrint print =
                JasperFillManager.fillReport(report, parameters, conn);Hope that can help, if you need more information please ask,
    Best regards,
    Tif

  • "Keep Alive" parameter for listener?

    Hi all,
    we have following problem:
    From time to time the client (oracle forms 6i patch 18) gets the error message ORA-03114. Te solution is only to kill forms application and start it again.
    This hangs probably on the network breaks in the communication (over VPN) with the database.
    Is there any parameter for listener like "Keep alive" or else, which can rebuild the connection once it lost?
    Best regards

    Paste this into the SQLNET.ORA on the application server or the server that is making the SQL calls to the database.
    Trace_level_client=16
    Trace_directory_client=<path_to_the_trace_directory> # use the full path to the trace directory
    Trace_unique_client=on
    Trace_timestamp_client=on
    Then review the trace or you can try the keep alive in windows
    Use the standard TCP KeepAlive on Windows
    1. Open the registry under:
    HKEY_LOCAL_MACHINE: SYSTEM: CurrentControlSet: Services: Tcpip:
    Parameters
    2. Add KeepAliveTime : REG_DWORD to the registry
    3. Set the value to a reasonable timeout.(decimal and NOT Hex) Like 480000 equals 8 minutes or 120000 equals 2 minutes etc etc.
    - Save this
    - Reboot

  • What is the Best Safari Version for OS 10.9.5 Maverick on a MacBookPro, 2.4Ghz, 8 GB Mem.?

    What is the best Safari Version for OS 19.9.5 Maverick on a MacBook Pro. 2.4 Ghz, with 8 gb memory?

    The best version for Mavericks, in fact the only version, is an integral part of OS X. In other words you already have it.
    Its version number is 7.1.5.
    Keep OS X up to date: Update OS X and App Store apps on your Mac - Apple Support

  • I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

    I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

    It is now confirmed  that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
    On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
    Features No Longer Available Once MobileMe is Discontinued:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ MobileMe Gallery
    All of these features can be replaced with 3rd party options.
    I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken.  If I published directly from iWeb to the FPT server those two features continued to work correctly.
    There's another problem and that's with iWeb's popup slideshows.  Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
    Click to view full size
    However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone.  How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
    Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
    This might be of some interest to you at this time: Life After MobileMe.
    OT

  • How set and get parameter for a session of a portlet (Java)

    I would like get parameter and set parameter for a portlet in portal 9.02. This parameter must be availbale during the session of the portal.
    With Java Servlet
    // I retrieve my session
    HttpServletRequest httpreq = (HttpServletRequest)req;
    HttpServletResponse httpresp = (HttpServletResponse)resp;
    HttpSession session = httpreq.getSession();
    //And after i can get or set some parameter for this servlet
    //Example
    session.setAttribute("MyEmployeeNumber","600000");
    String id = (String)session.getAttribute("MyEmployeeNumber");
    // But with Portlet in portal, i can't do it.
    PortletRenderRequest pr= (PortletRenderRequest)httpreq.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
    String sUser=pr.getUser().getName();
    ProviderSession session=pr.getSession();
    // But after if i want get or set a value in this session i have a internal error 500
    session.setAttribute("MyEmployeeNumber","600000");
    I would like my parameter is avalaible during a session for a user in each page of the portal, because my portlet is on each page.

    I have almost the same problem. I tried as you suggested, but it doesn't work yet.
    provider.xml
    <session>true</session>
    <passAllUrlParams>true</passAllUrlParams>
    My code in my jsp-portlet is
    <%@page contentType="text/html; charset=windows-1252"
    import="oracle.portal.provider.v2.render.PortletRenderRequest"
    import="oracle.portal.provider.v2.render.PortletRendererUtil"
    import="oracle.portal.provider.v2.http.HttpCommonConstants"
    import="oracle.portal.provider.v2.ParameterDefinition"
    import="oracle.portal.provider.v2.render.http.HttpPortletRendererUtil"
    %>
    <%@page session="true"%>
    <%
    PortletRenderRequest pReq = (PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
    String valueSession = (String)pReq.getAttribute("sesion");
    if (valueSession != null) {
    pReq.setAttribute("session", "value1");
    out.println("<br>(1)valueSession != null");
    out.println("<br>(1)valueSession : " + pReq.getAttribute("session"));
    } else {
    pReq.setAttribute("session", "value2");
    out.println("<br>(2)valueSession == null");
    out.println("<br>(2)valueSession : " + pReq.getAttribute("session"));
    %>
    And i always get as result:
    (2)valueSession == null
    (2)valueSession : value2
    Even when i send values (post) at the same page or browsing between tabs:
    I check my provider registration and it has the value "once per session"
    I have portal 9.0.2.2.14
    Thanks

  • Parameter for Current Month and Previous Month

    I'm trying to create a parameter for current month and previous month based on the ex_date, but not sure what i'm doing wrong. 
    where ex_date = @SelectDate
    I created a second dataset below for the values in the parameters.
    SELECT Month(CURRENT_TIMESTAMP) AS 'Month', 'Current Month' as 'Current Month'
    union all
    SELECT Month(CURRENT_TIMESTAMP)-1 AS Month, 'Previous Month' as 'Previous Month'
    Results
    Month Current Month
    3 Current Month
    2 Previous Month
    Once I preview it I get "Conversion failed when converting date and/ or time from character string" I changed the data type to "date/Time" but that did not make a difference. The date is convert (varchar(10), ex_date, 101) so looks like
    11/12/2014. 
    I've also tried expressions like =month(now()) to pull current month with same error so i'm not sure what i'm doing wrong. Any ideas?

    i tired this real simple report
     in the first dataset - my main report query - select name from sysdatabases where month(crdate())=@month
    in the second dataset - select month(getdate()) as Month1
    in the parameters - choose int data type and available values - select the second data set
    in the first data set- add this parameter..( i am assumming you know this, since you have done)
    in the preview you should get the drop down with current month number - 3
    and if you run the report, it will display the database names that were created in march. remember we are no checking year, so will get all that were created in march across the years.
    Hope it Helps!!
    I'm looking to have the dropdown say "Previous Month" and "Current Month" as a option. I know how to get the information in SQL, but not sure how this translates or put into a parameter.
    Current Month
    list_date BETWEEN
    DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()), 0)
    AND
    DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()) + 1, 0)
    Previous Month
    list_date between
    CONVERT(varchar,dateadd(d,-(day(dateadd(m,-1,getdate()-2))),dateadd(m,-1,getdate()-1)),106) /* Last Month */
    and
    CONVERT(varchar,dateadd(d,-(day(getdate())),getdate()),106)

  • One parameter for multiple Crystal reports in Publication

    Does anyone know if it is possible to enter one identical parameter for multiple Crystal reports in publication when scheduling? BOE 3.1 SP3 Windows, Java.
    To elaborate I am creating publication with multiple reports, each report has one parameter and this parameter is identical in every report in publication. So instead of entering this parameter many times I would like to enter once. 
    If yes point me in the right direction to get the how to or post the steps.

    Daniel,
    Thank you so much for your answer. It was very helpful. In the end, it didn't work but it helped me figure out what was happening. I use a different form for the reports and I had it coded in the form which report to use. I created a second form for the second crystal and then I used an if statement to choose the form and it worked like a charm.
    Thanks so much again!

  • HT1338 What is the best online storage for photos. Specifically one that allows the original image quality to be downloaded should your hard storage goes belly up

    What is the best online storage for photos. Specifically one that allows the original image quality to be downloaded should your hard storage goes belly up

    I'd put them on an external hard drive(s) and burn them to a DVD as well (at least 2 - 3 copies on different drives/media); I prefer having control and a local solution instead of relying on a server and the possibility of someone (who shouldn't be)  downloading my work.

  • HT4664 What is the best graphics card for FCPX?

    In the nonstop anti-FCPX propaganda is an article of interest — posted 7/9/12 — comparing the benchmarks of FCPX and PP6.
    http://www.streamingmedia.com/Producer/Articles/ReadArticle.aspx?ArticleID=83582 &PageNum=1
    The system used was a 2 x 2.93 GHz Quad-Core Mac Pro from early 2009 running MacOS X version 10.7.4 with 12 GB of RAM and an NVIDIA Quadro FX 4800 graphics card with 1.5 GB of onboard RAM.
    In most cases PP6 outperformed FCPX with this configuration. However, in the comments Ben Balser pointed out that FCP X's A/VFoundation engine wasn't ideal on the NVIDA card:
    "Quadro is actually not the best card for FCP X's A/VFoundation engine, but great for CS6's Mercury engine, so the test is amazingly flawed right there. Try both on a 5780 card and watch things drastically change. I've done that test myself. Exporting to Compressor uses a MUCH more sophisticated encoding engine meant for higher level, professional transcoding, not simple outputs, which are faster using Export Media…"
    Apple lists this card on its support page: http://support.apple.com/kb/HT4664
    So,
    What is the best graphics card for FCPX?

    Ben,
    Thanks for chiming in on that article. It would be good to have a benchmark comparison with the two systems each with a preferred card.
    I'm hoping to see some other comparisons on this thread. Also, some links to other articles about best practices and configurations.

  • What is the best Compressor setting for best quality video playback on an iBook g4?

    I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
    I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
    The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
    This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
    Any suggestions are greatly appreciated! Thanks!

    Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
    Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
    So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
    If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
    All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
    Is there an easier way?

  • How to make a common parameter for two subreports in the main report.

    Hi,
    I have a crystal report which has 2 subreports in it. Both the subreports have the same code and I need to create a parameter for Project Cost in both the subreports for filtering the data.
    When i create the same parameter in both the subreports, i see two parameters with same name on my prompt page while refreshing the report. however I just want 1 parameter on my prompt page and data should get filtered in both the reports.
    Can anyone please suggest something, How can I do that? is there a way for sharing same parameter between two subreports?
    Thanks!
    Neha.

    hi Neha,
    here's how to do this:
    1) create a new parameter with the same name on the main report
    2) right click on your first subreport and choose Change Subreport Links
    3) in the Field to Link To list drag over your new main report parameter
    4) open the Subreport Parameter Field to Use select menu and choose your subreport parameter
    5) repeat steps for the 2nd subreport
    now you'll only get prompted once.
    cheers,
    jamie

Maybe you are looking for