Best video and audio converter that contains most format at mac app store

Dear All;
What is the best video and audio converter that contains most format at mac app store?Can you suggest any on Mac App Store?
Regards;

I use Wondreshare's dvd ripper. I travel for a living, so the $60 or $70 I spent to rip my entire dvd collection onto an external hard drive that I can take anywhere I go. Their software isn't available in the App Store to my knowledge but I have had it for a couple years now without any trouble.

Similar Messages

I have a clip with synchronized audio. When I trim a section of video it does not trim the audio. How do I trim both video and audio so that the clip remains in sync?

Why is FCPX not allow me to cut both video and audio tracks at the same time?
My separate synchronized audio does not trim when I trim the video. They are connected and synchronized.

fulei wrote:
The audio track does not edit along with the video. They go out of sync
Sounds like a different problem than your trim problem in the first post. If your problem is they drift out of sync, we'd need to knoow more about the project and clip properties – including how the audio file you're syncing to was created.
Russ

How can I make a complaint for an App that I bought thru the Mac App Store?

Hello everybody, I just bought an app few minutes ago and I'm not satisfied with it. How can I claim to receive my money back? Regards.

Apple's policy is that all sales are final.
Mac App Store Support -
http://www.apple.com/support/mac/app-store/

It seems that the installer on the Mac App Store is still OS X 10.9.3

I downloaded the full installer app from the Mac App Store today.
The version written on the Information Column is 10.9.4.
However, I checked the md5 of the InstallESD.dmg only to find that it is the same as OS X 10.9.3's InstallESD.dmg.
Hence, it seems that the full installer app on the MAS now is still OS X 10.9.3.
Is there anyone who encountered the same problem?
Here is the screenshot of the md5.

Does the InstallESD.dmg contain everything that gets installed? I thought there were other packages that were external to the installESD?
Do you need to compare every file?
FileMerge in the developer tools does this visually.
Or use find with md5…
find "/Applications/Install OS X Mavericks.app" -type f -exec md5 {} \;
# big list of md5's...
You could just compare packages.
find "/Applications/Install OS X Mavericks.app" -type f -name *.mpkg -exec md5 {} \;
I suspect the installer also downloads updates, but it's not clear if this is automated or if it is only done in software update after the install, it seems like the latter.
Also bear in mind lots of caching goes on with massive distribution systems like the App Store updates, you may want to give it a few hours (or days) to allow caches to be fully renewed, or try another network connection if possible, some ISP's can try to be aggressive about DNS or other caching.

Notification that iTunes needs updating in mac app store will not go, despite updating??

i cannot get rid of the notification that iTunes needs updating, despite updating several times??

I am having a similar problem. I get one of two errors: "We could not complete your request. There was an error in the App Store. Please try again later. (null)" OR "We could not complete your purchase INSTALL_ERROR_DISTRIBUTION_SIGNED_BY_APPLE".
I am having this trouble on a brand new MacBook Pro running OS X 10.7.1. My firewall is off and no virus software is installed.
I can download and update apps on a different computer using OS X 10.6.8 just fine.
Any other recommendations?

My new mac does not have idvd11 and I can't find it in the mac app store?

I have just got a new iMac. It does not have iDVD11 on it and I can't find it in the Mac store? What is the deal?

iDVD is no longer a part of iLife and is no longer supported or distributed by Apple.

Is there a way to disable the auto play video and audio ads that are showing up on the web these days?

A lot of sites have video ads that load and start playing while safari is loading the entire page - slows everythiing down. Also a couple news sites I go to have autoload/play content. Is there a way to disable these auto loads?

Install the ClickToFlash or ClickToPlugin Safari extension.

Getting Ripped DVD Video and Audio Into Encore

Do you have previously authored DVDs that need rework? Do you want to add menus with greater impact and functionality? Do you want to add some additional program or supplemental material? Does a client want their product demo DVD to be updated to reflect the capabilities of the new and improved version, but the source files no longer exist? Using Adobe Encore DVD and a freeware utility called DVD Decrypter (DVDD), you can accomplish this quickly and easily.
Disclaimer: I do not support the illegal copying and/or distribution of copyrighted works. The authors and distributors of the software I use have made it clear that they do not support illegal copying. This guide is intended solely to assist you in ripping and copying DVD video to which you have the legal rights. Any use of this guide to infringe the copyright of someone else’s intellectual property is prohibited.
This guide is based on Adobe Encore DVD 1.5.1 and DVD Decrypter version 3.5.4.0. Let’s Begin!
Place the DVD to be ripped in your DVD drive and launch DVDD. If you have more than one drive (e.g., a DVD-ROM and a DVD burner) make sure the one with the disc is selected in the Source dropdown list in the main program window. Now we need to set up DVDD to extract video in a way that is “Encore friendly”. This is the toughest part of the whole exercise. Click on the Tools menu item and choose “Settings…”.
Settings
General Tab: You can leave these set at their defaults if you like. Personally, I specify a custom Default Destination. I put my ripped video assets all in one place anyway, and having a default destination means I have one less thing to do when I rip a DVD.
IFO Mode Tab: Make sure that “Select Main Movie PGC” and “Enable Stream Processing” are checked. “Uncheck Suspect Cells” is probably a good default safety check. If your hard disks are formatted as NTFS, set File Splitting to “None”. I leave “Copy IFO File” checked with the default sub-items checked. Make sure that “Patch M2V Timecode” is unchecked. The items in the Create Additional Files section are purely optional. The author of DVDD has been kind enough to list which programs need which files; notice that Encore DVD isn’t listed as needing any of these extra files. I do keep the “Stream Information” box checked. DVDD generates very informative file names, but I like to keep “Include PGC Number” under File Names checked. Be advised you will get some lengthy file names after DVDD is finished ripping.
Stream Processing Tab: Since we enabled stream processing in the IFO Mode tab, we need to tell DVDD how to process those streams. To save yourself time and confusion later, check the “Convert PCM to WAV” box. Earlier versions of Encore required a Demuxed audio stream and a Raw video stream. Encore 1.5.1 can accept either type of video stream (Raw or Demuxed) but it does still require a Demuxed audio stream. However, I still recommend using Raw video and Demuxed audio, if only because it seems to be somewhat faster to process in DVDD. This workflow is also backward-compatible with earlier versions of Encore.
So let’s set up the Stream Processing tab now. In the Demux box, enter “0x8? 0xA? 0xC?”. This ensures that all audio streams in the selected PGC, whether AC3, PCM or MPEG will be set to Demux. In the Raw box, enter “0xE0”. This ensures that the video from the selected PGC will be set to Raw.
Additional Notes about the Stream Processing Tab:
1. For those of you asking the question, “What the heck is a PGC?” it’s just DVD-speak for the titles in a DVD project. And I’m not talking about the opening or end credits, either; I’m talking about the titles that result, for example, from the timelines you create in an Encore DVD project. There is a subtle difference between a PGC and a VTS (title set), but that's not important right now.
2. Happily, recent versions of DVDD create a WAV file after ripping that will import directly into Encore. Versions prior to 3.2.0.0 would create a WAV file that had to be imported to, and exported from, a sound editing program like Adobe Audition, Goldwave or SoundForge before Encore would recognize it.
Events Tab: For convenience sake, I recommend setting “Set Program Mode” in the Startup section to “IFO”. That way, whenever you launch DVDD, it will look familiar to you. You may safely ignore all of the other tabs in the Settings dialog.
Ripping
1.Under the Input Tab of the main program window, select the PGC you want to rip. You can only do one at a time.
2.Switch to the Stream Processing Tab. Verify that Enable Stream Processing is checked.
3.Check or uncheck any or all of the video and audio streams that are listed. Highlight each one to verify that all audio streams are set to Demux and the video stream is set to Raw.
4.If you didn’t select Default Destination in the General Settings Tab, then you need to tell DVDD where to put the ripped files now.
5.Click on the big DVD-to-Disk icon.
6.DVDD will announce, quite loudly, when it has finished. At that point you can rename the files or import them as is into Encore.
I hope you find this guide useful and that it helps you get the most out of your investment in Adobe Encore DVD.
Guide © Jeff Bellune 2005

OK, I can't tell you what we are doing, you'll have to trust me that it's for a very good cause. I'll simplify the use case as an example. If I can do the following we'll be OK:
1) Read video/audo files from a DVD that we created
2) Open these files with the QuickTime Player, click on Export to Apple TV to create an output file.
I'd rather not do an interim conversion of the video data (like use a 3rd party app to convert to mp4 first and then read into QT, but I'm considering a conversion to DV) because that could seriously hurt the apps effectiveness. I also can't use another app (MPEG Streamclip, HandBrake, VisualHub, etc.) to do the conversion.

Mov files dropping video and audio frames CC 2014

I have been experiencing playback issues in Premiere and just got off the phone with Adobe support. It appears that there is known issue with .mov files dropping video and audio frames that will likely be fixed in the next release. My entire project is .mov files and we need to get some serious editing done to complete a rough cut of our film. As a bandaid, we have reverted the playback renderer to software only and I am experimenting with different preview file formats to see if I will have less dropped frames. I want to avoid converting my media from mov files at all costs as this would be very time consuming with over 100 hours of footage.
Please let me know if you have any other workarounds!
Sandy
Windows 7
Adobe CC 2014 (up to date)
Nvidia Quadro K2000 (driver up to date)
16 GB RAM

Welcome to the forum.
Unfortunately, MOV can hold all sorts of "stuff." See this article for some more detail: http://forums.adobe.com/thread/440037?tstart=0
Can you let us know what is inside that MOV "wrapper?"
Thanks, and good luck,
Hunt

About Apple ID and Mac App Store Purchases...

Hi,
I was wondering if someone could give me some assistance for this question. Ok here's the situation, I want to use iCloud in my Mac however, I can't use it because it requires my Apple ID to be in an e-mail format (i.e. "[email protected]"), and my ID is in user name format (i.e. "deltaforce"). I know that you can change your ID into email format by logging into appleid.apple.com. the problem that I have is that I have made multiple Mac App Stores purchases and I don't want to lose them if I update the ID. I was wondering if the Mac App Store will still recognize me as the owner of my apps under the new ID.
Thanks for any assistance on this matter...
Happy Holidays!

I have now spent many hours on this APPLE ID issue and still no luck from apple. I paid for an Apple ID for 10 Years with my .mac account which did not have the email address format. So now I bought an IPAD and had to convert to the email address format - OK no problem except all the APPS and Music purchased under my original ID ar NO LONGER linked to my @mac.com address. Where did they go? I have 3 other macs trying to sync and now nothing works! Type " apple ID issues" into Google ( Google - not the apple support search window) and the first thing that comes up is many people with the same issue - click on the "Apple ID verification problem" and you will see over 6000 people have used this trail to figure out what happened to their Apple ID. Come on APPLE - Read you own posts and help us. I did not change my account you did. I am a loyal 30 year apple fan and this is the most PC thing you have ever done. The apple Experts at the store are telling me I have to pay for tech support help to fix your server issues - - Come on!!! That would not work anyway - - Just read all the people who have tried at this link and you will see that many people have this issue and the tech support does not know how to fix it.
https://discussions.apple.com/thread/3422165?start=15&tstart=0

Problem with Resuming and Installing Apps Purchased using Mac App Store

Recently I have been trying to download and install AeroFly FS which I purchased from Mac App Store (17GB) and with my internet connection it take some 4-5 days to download that.
I have 2 problems.
1) Resume download don't work if I happen to reboot my macbook pro for some reason after pausing the download before the reboot. When I reboot and try resuming the download... the resume button changes to install, and the download start afresh, I technically lost all my previous downloaded data.
2) The app was 17GB ( I guess thats the installer), and I had some 25GB left after the download completed. But it gave an error saying while installing that not much disk space. So I moved/deleted many item on my drive and got the disk space to some 37GB Free. But it was still giving the same error of not much disk space.
So, I thought the new avaialable diskspace was not accounted for. So, I rebooted the macbook. And to my agony, I found the roboot wiped out the 17GB installer I managed to download from Mac App Store.
So, far i have wasted almost more than a week trying to download and install this app. Now, I am re-downloading it for the third time.
Any Help will be highly appreciated.
Any Tips on how I can move the installer once it sdownloaded to my external HDD, and where can i find this installer which App store downloads?
Regards,
Sapam

Hi ...
37GB of free space is not enough.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 20% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
OSX Tips Where did my Disk Space go?

It takes a full minute and a half for the Mac App Store Application to load on my iMac. How can I fix this. No other applications launch so slowly.

Whenever I click on the Mac App Store icon in my dock, I get the spinning wheel for a minute and a half. It then loads. While in the App Store application, it takes a minute and a half to switch from "featured" to "top charts" for example. Nothing else on my 24" iMac takes that long to load. Any ideas on how to fix this problem?

Drag the App Store app from the Applications folder to the Trash. Drag the App Store icon off the Dock. It should go "poof"..
Download and install the v10.6.7 combo update.
http://support.apple.com/kb/DL1361
That should re install the Mac App Store for you. It's ok to do this even if you are already running v10.6.7
If the combo did not re install the MAS for you use Pacifist to extract the MAS from the v 10.6.7 .dmg folder.

Aperture 3, the Mac App Store, and Multiple Computers

Can anyone answer this question:
I have Aperture 3 installed on my Macbook Pro since the Feb 2009 release. Obviously, I bought the DVD for install. And of course, when I log into the Mac App Store, it shows as installed on my computer.
If I bought a second mac and logged into the MAS, would it "know" that I have Aperture 3 linked to my account, realize it was not installed on the new mac and allow me to install it, or would I have to purchase a new copy at $80?
Thanks,
Bryan

Bryan,
Only apps bought via the MAS can be updated or downloaded to another computer. Even though it shows AP as being installed, you'll notice it doesn't appear in your list of purchases - which is where you'd go to re-install. It only recognizes that you already have the application in order to prevent you from unintentionally buying it again.
But if you purchase another Mac you can certainly use your current DVD or download the trial to install it on that second machine - AFAIK the EULA doesn't prevent this as long as its for the same user and not being used on both machines at the same time.
I have the sneaking suspicion that Aperture will no longer offer upgrade pricing and instead charge a lower fixed rate (a la iWork) for each major version. What this means in the long term is a bit fuzzy though: while I'm all for lower prices, $79 is clearly consumer territory and I'm not sure how this will affect the orientation of the app in the future. That, and the influx of non-pro users this price drop will certainly bring. I believe the more users there are the better, but I just hope Apple stays focused on Aperture's primary mission and continues to cater to pro photographers. It would break my heart to see this amazing software devolve into iPhoto Plus...

Am having a problem locating autocad lt 2012 edition on mac app store. anyone had any success with this. all the websites state that it has been launched on mac app store last week

has anyone been able to purchase the autocad 2012 lt edition that apparently is available on mac app store. dont seem to be able to find it?

This article was posted on August 16th: http://blogs.wsj.com/digits/2011/08/16/autodesk-adopts-apple-app-store-for-mac-s oftware/
Perhaps this coming Tuesday.

How can I use QuickTime to make a screen recording that has both video and audio?

How do use QuickTime to make a screen recording that can be saved with both video and audio together?

do you know of any software that would record a QT movie playing on my Mac screen with both audio and video?
I have used Ambrosia's Snapz Pro X ($69) for years, but they are currently upgrading their Kext (Kernel Extension) software for changes inroduced by the Lion release so it might not be your best bet at this time. I also use ScreenFlow but it is a combination capture and editing utility which runs $99 and may include more features than you may need or will use. Have also tried Screenflick ($29) which, to some extent, appears to have a functionality somewhere between that of Snapz Pro X and ScreenFlow. It is a bit more complicated to set up but for the price might be the best bargin at this point. All three can capture the entire screen or a portion thereof, with or without mic/line and/or system audio. (Or at least they all will as soon as Ambrosia updates its Kext routine.)
Here is a URL link posted by QTKirk three days ago to an article that recaps of a number of currently available third-party screen capture apps from around the world several of which may interest you: http://mac.appstorm.net/roundups/utilities-roundups/10-screen-recording-tools-fo r-mac/

Best video and audio converter that contains most format at mac app store

Similar Messages

Maybe you are looking for