Best video card for my mac

Hey,
I just need help finding the best video card for my Powermac g4 fw800. One that my system can use fully. I currently have a Radeon 9000Pro with 64MB. Thanks
~R

Hi
The ATI 9800-256MB is currently the best card for your system. Actually, there are no other NEW video cards available.
BTW, xlr8yourmac hasn't done a video card review in years, they are just a bulletin board/newsletter now. If you are interested in seeing current testing of available video cards, check out:
http://www.barefeats.com/rad98pro.html
Regards,
Dave

Similar Messages

Top two best video cards for older Mac Pros?

I have some older Mac Pro towers that vary from:
2.66 GHz Quad Core Intel Xeon
..to this:
2 x 2.93 GHz 6 Core Intel Xeon
Looking for at least the top two video cards that are tried and tested that would work best with at least Premiere Pro and AME. I just need to narrow down the unwieldy list that can be found here: http://www.adobe.com/products/premiere/tech-specs.html

MikeJamesG wrote:
Looking for at least the top two video cards that are tried and tested that would work best with at least Premiere Pro and AME.
Are you adverse to using aftermarket cards that have been converted to work properly in a Mac? If you aren't, then I'd recommend talking to Dave @ MacVidCards because he can cook you up an nVidia 700-series card that will boot properly in a Mac Pro, run at PCI-E 2.0 speeds, and work wonderfully in Pr/AME.

What is the best video card for 3D?

I'm getting a 2008 Mac Pro, will equip it with 10GB of RAM. What is the best video card for 3D rendering? I've read that the stock ATI 2600 card is woefully inadequate. I've also read that the NVIDIA 8800 card is better for gaming, and has caused some problems anyway. I can't spring for the top-end Quadra card that Apple offers. Are there good, cost-effective options for 3D work? Can I even get a video card on the open market that is not flashed by Apple?

Basically there are only three options available:
1. ATI 2600
2. ATI 1900
3. NVidia 8800
The latter is the best of the three. See benchmark results at Bare Feats.
You cannot use a video card not provided by Apple because they will not work with OS X or the hardware.

Best Video Card for non 3d/compositing work in Premiere CS4?

Hi all, I'm looking to optimize my system where I can to speed up the editing process. I edit 1080p footage from the Canon 5D MKII (h.264 MOV files)using half-res h.264 proxies, but CS4 seems to hang a lot in the timeline view and clips just disappear and instead show green. I'm switching to half-res MPEG-2 (.m2v) proxies now and so far that problem seems to have gone away (still testing), but when timeline display quality is at "High Quality" (vs. automatic) there's still some chop during slow pans (not seen with "Automatic" or "Draft Quality").
Anyway, I'm looking for the weakest point in my system and suspect the video card. My system is an 2.66 i7 processor, 6GB 1333 ram, 1x160GB sata II HD (OS/Apps), 3x1TB SATA II RAID 0 (paging file, data), and an $80 ATI 4650 512 MB video card running Vista 64.
So all that said, what's the best general graphics card for editing HD video in Premiere CS4? I don't care about 3d or compositing at this stage, just basic editing of unrendered (timeline playback) HD video, maybe sometimes 1-3 HD layers, some basic color correction effects (b+w, contrast, etc), dissolves, text overlay, some clip speed manipulation.
Many seem to recommend the Nvidia quadro cards, but I haven't found any information to suggest they help with anything other than 3D/compositing, which I don't need (and therefore don't need to pay the premium).
There's also the Nvidia CX card, but it's main feature is touted as encoding h.264, whereas I could care less about that and ideally need decoding of h.264 in the timeline to be better. I haven't seen any great reviews on this card of heard of average user testimonials, probably because it's $2k and it mainly marketed as "zoom more fluidly in photoshop, export h.264 4x faster", which seem like minor issues vs. "better realtime playback of HD video".
I sort of rambled, but if any informed CS4 users can help answer the question regarding the best video card for general CS4 editing use (not 3d/compositing stuff) I'd love to get more insight.

So in Media Encoder CS4, I tried encoding one of the clips that plays back the least smooth in the Premiere timeline (a slow pan across intricate patterns on a sand dune in death valley) to the following:
Format: P2 Movie, Preset: DVCPRO HD 720P 30
(this was the only format in media encoder that mentions DVCPRO HD)
I noticed when trying to customize the setting, that there is no 30 fps option, just 23.976, 29.97, and 59.94. I just went with 29.97 as that was the closest to the 30 fps of the source MK II footage. The width and height were also unajustable at 960x720 for the DVCPRO HD format.
Playing the output in the timeline view of Premiere was comparable in smoothness to the m2v file. I looked at my resource monitor during playback looking for bottlenecks, and the CPU does seem to spike at 100% initially when playing this clip back. I reverted to the m2v version and also saw the same CPU spike. I also reverted back to the down-res'd mp4 version, same spike. Moving display quality down to draft does allow for smooth playback here.
So I guess there's something about this clip that is CPU intensive to play back in the timeline in any of these formats. The original 1080p version plays back perfectly in both quicktime and VLC player.
Anyway, for now I think I'm content with using the m2v proxies as a big chunk of the clips are fairly smooth, and using a reduced quality display mode for clips that don't play as smoothly is accpeptable for now. At least so far I'm not seeing the hanging/video not displaying (and instead showing a green screen) that I was with the mp4 proxies.
If anyone has any other suggestions as to how to get smoother timeline playback for these proxies (or the original h.264 .MOV files), however, whether it be a hardware upgrade (e.g. better video card) or a different proxy codec, I'd love to hear them and give it a shot.

ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac

We want to be able to use our 30" cinema display from the G4 and was advised in a previous discussion to buy the ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac. It doesn't seem to be available anywhere. Does anybody know of an alternate video card that's currently available that will get us there? (We had the display running from a G5 that quit / logic board failure).
Many thanks,
Philip

The Nvidia 7800GS is a flashed card, runs a 30" with ease.
BruinMacs on Ebay is a great place to get one, you support the guy who wrote the original ROM for these.
He doesn't seem to have any for sale right now, but if you email him, maybe he will list one.
There are also flashed X800s that work on your MDD and can run a 30". They are pricey but will offer dual DVI while the 7800GS is single DVI with VGA for second display.
There are also flashed 6600GT AGP cards which will work, but harder to find.
Any of the above 3 will run circles around a 9600.

Best video card for Archlinux?

What is the best video card for Archlinux distribution?
Is it possible to make Radeon HD 4870 work somehow in Archlinux, the same way like it works in Ubuntu?

Just see what drivers are you using with your ubuntu install? Catalyst/xf86-video-ati/radeonhd and install the same on arch.

Best video card for G4 tower?

What's the best video card for my G4 tower without breaking the bank?
I have the dual 500nhz, 2GB ram, OSX 10.4.
I currently have a nVidia Gforce64mb with a small fan.

No you're OK...
There is DVI-I, DVD-D, & DVI-A, DVI-I contains both DVI-A & DVI-D, HDMI uses DVD-D, (Digital), so it can connect to DVI-I or DVD-D.
Those 4 holes are only used for DVI-A, (analog).

Best video card for a Power Mac G5 Dual 1.8 GHz

What is the best video card I can upgrade to with my Power Mac G5 Dual 1.8 GHz?
Thanks,
Jeff

Hi-
The best is probably the one that you can find..... getting hard to find Mac 8x AGP cards.....
Best OEM cards are (were) Radeon 850XT, Radeon X800XT, Geforce 6800 Ultra and Geforce 6800 GT, in order from fastest.
X800 vs. others
Now, most options are the above, used, or, flashed PC cards. PC cards include the above, but have one faster than even the X850XT- the Geforce 7800 GS.
7800 GS in a G5

Best video card for Aperture

Hi
Which is for you the best video card built for Macpro to use with Aperture, excluding the1,5GB card from Apple store?
The 8800GT 512 is great one?
I think I'll use in future with an Apple cinema display 23".
Thanks
Koferc

Barefeats seems to like the Radeon HD 3870 Mac for the Mac Pros. I ordered my MP with the 8800 GT upgrade, but as steebow posted above it appears the ATI has better drivers, so that the 3870 upgrade seems to be the way to go. Aperture was not tested, but in other Core Image tests it seems to do better on the 3870:
http://www.barefeats.com/harper16.html
Here's a recent test of 10.55 compared to 10.5.4 for the two cards as well:
http://www.barefeats.com/harper20.html
The 3870 is available at OWC for $217.99:
http://eshop.macsales.com/item/ATI%20Technologies/100435928/

Best Video Card for the G5?

What's the best Video Card I can put in my G5?
Currently I've got a:
Mac Dual 2.7 GHz PowerPC G5, w/4GB DDR SDRAM, and 256 MB total of VRAM. The existing graphics card is the: NVIDIA GeForce 6800 GT DDL
Thanks!
Matt

Hi,
If you haven't noticed, there are only two choices available from Apple. The nvidia 6600 (slower than yours) and the ATI X800 (similar to yours).
There is a place that flashes Nvidia 7800's from PC to Mac, I installed one the other day and it works perfect in a Quad.
In addition, there was a contract signed last month between XFX and Apple for upgrade video cards for Mac G4's and G5's. It was reported that this merchandise may be available by Summer (nothing definite).
Regards,
Dave

Best Video Card for Editing and Rendering?

I bet this topic has been discussed at length, but doing a search for "best video card" did not give me the results I need. I am working with the latest version of Magic Bullet Movie Looks and started to notice artifacts in rendered video; flashes, black/white lines and complete boxes in the final frame. I contacted Red Giant, and they informed me my Quadro FX 1500 is not a "supported" card and is most likely the cause of these artifacts. Strange, as Movie Looks had Quadro FX 1300 and up as listed on their web site as compatible - but I digress. My question is, what video card do YOU like for PPRO CS3 AND AE? Movie Looks, like many other programs, rely on the video GPU to render their output - what has been fastest for you, and NOT caused issues with the rest of the system? I use video overlay (as part of Nvidia's Dual View) to edit the Program ouput on a separate monitor and also need this functionality as well - can't live without it! Thanks for your answers.
System Specs:
Dual core Dual processor Woodcrest
6GB RAM
2 TB RAID HD
Current Card: PNY NVidia Quadro FX 1500

Well, if you go to Adobe's hardware compatibility page is does list the 7800 as being fully supported:
http://www.adobe.com/products/premiere/search_result.html?manuSearchVar=1&modelSearchVar=0 &supportSearchVar=0&brand=&dataFormat=&version=CS3&device=graphic&format=
but the 8800 series cards are also listed, which will support CUDA once it becomes widely used. CUDA is rumored to be utilized with CS4 which will speed up render and preview times drastically by utilizing the GPU as well as the CPU rather than mostly the CPU only.
http://insidehpc.com/2006/11/10/what-is-cuda/
This could still be a year or two away, so if you think you may upgrade your video card again before that time, you may want to stick with the 7800 for now.

TS1935 I have the video card model . What is the best video card for a 1.6GHz PowerPC G5 please?

Hello
What is the best (most modern and reliable) video card (AGP) which will work in a 1.6GHz PowerPC G5 (mid 2003)?
I believe I have ATY,RV350, and according to the attached article, it may be causing video start up problems.
Thank you
Adam

Hi Adam,
See japamacs page here on the best AGP cards for G4s & G5s...
http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
Rated slowest on top, fastest on bottom.
Though with no power loght & such, I'm not sure that is the problem or not... does the Hard drive(s) spin up?

Best video card for Aperture with Power Mac G5

Any suggestions for a good video card to use with a 2.0 GHz dual processor G5 (AGP video). The current card is an ATI Radeon 9600 Pro with 64 MB of VRAM and the performance isn't fast enough to use Aperture for image edits -- sorts and metadata updates work well enough, but something like cropping is too slow to be workable.

I looked long and hard for this card, and after waiting for months to get one, it finally arrived...DOA. I sent it back for exchange, and they had no more in stock, so my money was refunded. I looked again, and luckily found another one at a different retailer. It arrived and worked for about a month before artifacts started showing up. I sent it back to ATI for repair on December 4, and I still haven't gotten a replacement. The latest run of X800 cards that were retooled for ROHS compliance are crap. There are so many defective ones coming to their repair facility that repairs/replacements are taking more than 10 weeks.
That being said, the difference it makes in Aperture over the 9600 is significant, but not earth-shattering. For RAW images, it won't make performance great, but it will at least be tolerable compared to what it is now. There's no other video card upgrade for an AGP G5 that is worth pursuing. Still, it's a rather expensive card at about $300, and considering the quality issues and how difficult they are to find, I'd say it's not worth the hassle. Save up for a new Mac instead. One of the new Mac Pros, even the 4-core model with the Radeon HD 2600 XT, is blazingly fast in Aperture compared to a maxed-out G5.

Best video card for mac pro

Mac Pro Info:2x2.66 GHz Dual-Core Intel Xeon
MacPro1, 1
It says my mac pro (2006-2007) model had PCIe slots, but it doesn't mention PCI 2.0 slots. i'm looking to upgrade my video card to one of the better ones for this computer. currently i have a radeon x1900 XT 512 card. it can get clunky at times. I've been reading a lot about the Radeon HD5770, but it says it works with PCI 2.0. i've been reading that a lot of people that currently have the x1900 XT upgrade to the HD5770. but I don't want to buy an incompatible one. I just did that on my RAM and had to return it.
Does anyone know if this card will work? and will both mini display ports work as well?
or do you have a better suggestion for an upgrade?
i don't do a whole lot of gaming, but i like having a junky desktop with 30 browser windows open and 10 other programs open at the same time. i would like a card that is good for that. thanks again!

OpenGL 3.2 support15
Image quality enhancement technology
Up to 24x multi-sample and super-sample anti-aliasing modes
Adaptive anti-aliasing
16x angle independent anisotropic texture filtering
128-bit floating point HDR rendering
http://www.amd.com/us/products/desktop/graphics/ati-radeon-hd-5000/hd-5770/Pages /ati-radeon-hd-5770-overview.aspx#5
X1900 http://www.amd.com/us/products/desktop/graphics/other/Pages/x1900-specifications .aspx
not all ATI Radeon graphics cards are HDCP ready.
Complete feature set also supported in OpenGL® 2.0
Barefeats: adding the Radeon HD 5870 or 5770 to your 2006 Mac Pro won't cause it to "leap tall buildings in a single bound." But these new cards will help you "clear low buildings with a running start."
OpenGL 2.1 Released on July 2, 2006. Where is the 4.2 support, or even 3.2 support??
Apple lags by over half a decade and has not done much to modernize graphic driver support to current available standards.
OpenGL 4.2 Released on 8 August 2011[33]
Supported Cards: Nvidia GeForce 400 series, Nvidia GeForce 500 series, Nvidia GeForce 600 series, ATI Radeon HD 5000 series, AMD Radeon HD 6000 Series, AMD Radeon HD 7000 Series
Support for shaders with atomic counters and load/store/atomic read-modify-write operations to a single level of a texture.
Capturing GPU-tessellated geometry and drawing multiple instances of the result of a transform feedback to enable complex objects to be efficiently repositioned and replicated.
Support for modifying an arbitrary subset of a compressed texture, without having to re-download the whole texture to the GPU for significant performance improvements.
Support for packing multiple 8 and 16 bit values into a single 32-bit value for efficient shader processing with significantly reduced memory storage and bandwidth.
http://en.wikipedia.org/wiki/OpenGL
OpenCL 1.1 was ratified by the Khronos Group on 14 June 2010 - "Hello, that is full two years ago." http://en.wikipedia.org/wiki/OpenCL#cite_note-11
OpenCL 1.2 On 15 November 2011, the Khronos Group announced the OpenCL 1.2 specification,[13] which added significant functionality over the previous versions in terms of performance and features for parallel programming. Most notable features include:
Device partitioning: the ability to partition a device into sub-devices so that work assignments can be allocated to individual compute units. This is useful for reserving areas of the device to reduce latency for time-critical tasks.
Separate compilation and linking of objects: the functionality to compile OpenCL into external libraries for inclusion into other programs.
Enhanced image support: 1.2 adds support for 1D images and 1D/2D image arrays. Furthermore, the OpenGL sharing extensions now allow for OpenGL 1D textures and 1D/2D texture arrays to be used to create OpenCL images.
http://en.wikipedia.org/wiki/OpenCL
OpenCL is a trademark of Apple Inc.

Best Video card for Mid 2010 Mac Pro

I'm currently running a Mid 2010 Mac Pro with a 5870 video card in it. I feel that it's bottlenecking processes, and want to upgrade it. I'm not looking to upgrade the computer itself, but want to get the fastest video card that I can.
Looking for suggestions, and links if possible to what you know works.
Thanks!

Why do you a) need a "fast" video card, and b) think it is the bottleneck (it might)?
Maybe you need dual AMD's and a 2nd 5870 (with the addition of 2nd 450W PSU to drive it).
This: July 25th, 2014 -- GeForce GTX 780 6G: Mac Pro Tower 'Sweet Spot'?
Do you have some SSDs for system and scratch? that often is where you can attack a bottleneck and improve performance.
Graphics can need as much RAM as possible. Dual or single cpu? many are choosing to install one or two faster cpus of the 3.4GHz variety to help.

Best video card for my mac

Similar Messages

Maybe you are looking for