Best video converter for i-phones

Hello folks,
This is a thread regarding the best video converter for i phone. There are lots of videos on youtube and others that i want to be converted. I got many sites that converts the video into mp3 but when i go to download it, It conveys an error that content not supported. Please help me out.
Some resources claims to download videos or movies directly. But i fear to visit those as there is a threat of entering virus in my device. Here is a link for example:
Other Best Place To Download Movies

Are you trying to convert any Quicktime video to an iPhone?  This is a cheap solution for that:
http://www.dvdxdv.com/NewFolderLookSite/VeeScope/Products/VeescopeConverter/over view.html

Similar Messages

  • What is the best video converter for DVD to iMovie? Either free or to purchase.

    What is the best video converter for DVD to iMovie? Either free or to purchase.  And one that is 'fool-proof' and very easy to use.  Many thanks, anyone who can advise.

    You want to 'reverse engineer' the compressed mpeg2 DVD file back to something iMovie can use?
    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

  • What is the best video converter for high quality MPEG-4 for Apple TV?

    What is the best video converter for high quality MPEG-4 for Apple TV?

    Handbrake won't convert AVI files, But there are many more than those mentioned that will
    The choice of conversion software is a personal choice, I have around a dozen applications that will tackle AVI's, however VisualHub is not one of them, not because there is anything wrong with it but rather I have enough such applications in my arsenal already.
    I would use mpegstreamclip in most scenarios for what you are wanting to do but maybe not always. It is a good idea to have a few applications to choose from as not all do the same thing. mpegstreamclip has a few more options than some bog standard applications without becoming overburdening with choices.
    You might want to try a few applications yourself before deciding on the software for you. isquint is a free limited version of visualhub, you might want to give that a whirl to get a feeling for visualhub.
    Be aware though that quality conversions do not happen quickly, claims of being faster than other applications may well be correct, but are usually a trade off against quality. Again you need to choose your software to reflect your preferred balance between speed and quality.
    Here's how I use mpegstreamclip, http://web.me.com/gartside1104/z008/Mpegstreamclip.html but your AVI's may well be low quality, you shouldn't set the bitrate any higher than your source file and likely lower, you shouldn't increase the frame size either.
    Message was edited by: Winston Churchill

  • Vch is da best VIDEO CONVERTER for NOKIA N8

    plz suggest me a best video converter for nokia n8 and settings for that converter

    Dear Nokia N8 user:
    You can try out this program is good ImTOO MPEG Encoder ultimate. You have to convert your video file to MP4 format with resolution 720*480. Take a look to the attachment file .
    Attachments:
    Untitled.png ‏109 KB

  • What is the best video converter for iPhone?

    My last question was deleted I guess because I was not specific enough. I have a Sony DCR-DVD108 DVD Handycam® Camcorder which writes everything onto mini DVDs. I am looking for a good video converter to convert my home movies with. I am using Roxio Crunch, but it doesn't do as good of a job as I had hoped. What is the best video converter to use?
    P.S. Please don't delete my question again Apple.

    It was probably deleted because you said that it was in violation of the TOU, which I have read. I own all rights to DVDs which I myself have created, and I give myself permission to copy said DVDs for whatever reasons I wish. I am in no way violating the TOU: "Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store" because I am in no way trying to "work around" any sort of DRM, and I created the home movies and in no way was the iTunes Store involved; that is unless somehow a movie of my nephew's birthday is now available on iTunes. And I don't own an iPod video, I own an iPhone, which is why the question says "What is the best video converter FOR IPHONE?" and is why I am in an iPhone forum.
    Message was edited by: supermanguy87
    Message was edited by: supermanguy87

  • The best video converter for Final Cut Express format?

    I used to have a registration code for Visual Hub so I could convert files from my video camera so they would work with final cut express. My computer crashed awhile back so I lost my registration information (they are no longer selling these codes). Does anyone know a really good (fairly easy to use) video converter? Or maybe like to share a registration code :-)!

    I would like one that can do many different formats like Visual Hub did, but the file I am converting is a MPEG file. Also, I have some stuff that I made into a DVD using a Sony DVD burner and I needed to get those files converted.

  • Best Video Converter (for Mac) For Use With CS5

    I need a good converter for a Mac Pro so that I can easily bring in AVI i
    nto CS5.
    Thanks.

    What sort of "AVI" are you talking about? An AVI is just a container/box/dufflebag for all sorts of stuff; Macs and QuickTime will handle a number of codecs stored in an AVI container, but not everything. So ultimately, a Mac converter might not do you any good if there isn't a decoder available for the Mac. For example, Lagarith and Ut are two popular lossless codecs that write to AVIs, but there are no decoders for Mac, so the AVIs are unusable there.
    Another thing to consider is that, in all likelihood, if a converter can open up the AVI on the Mac, then Premiere will be able to import it without any other necessary changes. Get MediaInfo to analyze the file and discover what is inside of it. Once you know that, we can make better recommendations about how to treat the file.

  • Which is the best video converter for Final Cut Pro 7?

    Hi, I am using Fincal Cut Pro 7.0.3 and I am looking to find the most compatible, most efficient video converter to work with my FCP 7, I need import vidoe file formats such as AVI, MPEG, MTS to edtiting in FCP 7, and I am having hard time to converting them, even I managed to convert them and imported them into FCP they need rendering again and again in FCP and that wasted me tons to precisous time.
    Any suggestions?  Thank you so very much!
    Kevin

    Compressor.  Second, I would choose Episode.  But then MPEG Streamclip is very usefull when convert from many of the MPEG formats.  Keep in mind that formats such as those you listed are merely wrappers; the codec contained within could be one of dozens of codec, some of which may not convert well.
    -DH

  • Best Video Converter for Mac

    I have downloaded quite a few avi or divx from & would like to convert to view in my new AppleTV. Any recommendation?
    I am currently using iSquint which is free but it is slow - 700mb avi movie for high quality H.264 for TV takes around 2-3 hours! And the quality is still not as good as the original avi?
    Is it something to do with my setting or is there a better converter out there?

    Handbrake is good for converting DVDs, VisualHub is good for converting files from other formats to something playable on the AppleTV, and if you're looking for something to accelerate encoding times I'd take a look at the Elgato Turbo.264 hardware encoder. I purchased one of these a few months back and have been very happy with the conversion speeds and quality.

  • What's the best video converter for Macs?

    Help!  videos downloaded from camera and were deleted and can't be uploaded into imovies or quicktime in the format they are in

    Handbrake.
    http://handbrake.fr/

  • What is the best video converter (asf into AVI) for mac mini ox 10.5.8 leopard ppc?

    What is the best video converter (asf into AVI) for mac mini ox 10.5.8 leopard ppc?

    Try HandBrake 0.9.5 GUI
    HandBrake-0.9.5-MacOSX.5_GUI_i386.dmg
    Download
    Above from:
    https://handbrake.fr/old.php
    Also you posted this same question earlier (in Leipard Server forum) but did not receive any replies
    https://discussions.apple.com/message/26541868#26541868
    In the future mention that your tried

  • What is the best video converter (asf into AVI) for mac ox 10.5.8 leopard ppc?

    Friends can you tell me what is the best video converter (asf into AVI) for mac ox 10.5.8 leopard ppc?
    Thanks

    Hi Mazdauk, To convert ASF to AVI, I recommend you the iorgsoft video converter which I have been using. It claims to support ASF as input and AVI as output. Anyway, I haven't converted ASF to AVI, most of the time, I convert MTS to MP4. You can have a try first.

  • What is the best, safest MXF video converter for mac?

    I need to view MXF video files on my macbook pro. Wondering if anyone knows what is the best video converter to use for these files?

    Hi, I just got one recommended to you. It is iOrgSoft Video Mate. It can convert camcorder footages like MXF, AVCHD, MTS, XAVC, MOD, etc to regular video formats like MP4, MOV, 3GP, etc. I usually it to convert AVCHD files from my Sony cam. I think it works fine for me. You can have a try using it to convert MXF files.

  • How to make best videos/audios for Creative Zen/Zen Vision W/Zen Vision M/Z

    4Easysoft Creative Zen Video Converter is an all-in-one Video Converter for Creative Zen software with high output quality and powerful video editing functions, which can help all the zen users to make the best video/audio effect.
    First of all, let’s make clear what kinds of videos/audios can get the best effect in the zen players.
    Video:
    MPEG, WMV, and AVI (MPEG-4 SP, DivX, Xvid), while MPEG-1, and MPEG-2 are supported, but must be transcoded with the included software.
    Audio:
    MP3, AAC, WMA, WAV, and Audible 2, 3, and 4 formats.
    Settings:
    Video resolution: 320×240; Video Bitrate: 500 kbps; Audio Bitrate: between 96 to 128 kbps.
    Then, let me show you how to make a full use of this powerful converter.
    Preparation:Download and install 4Easysoft Creative Zen Video Converter
    http://www.4easysoft.com/guide/creative-zen-video-converter/main.jpg
    Step 1: Run this software and add video/audio files.
    Step 2: Select output video format from the profile drop-down list.
    Click the “Profile” button to select the output video format from the drop-down list button.
    Step 3: Customize output settings.
    Click “Settings” button in the output settings area, you are allowed to customize the output parameters, specify output folder and select output format.
    Step 4: Start conversion
    Click “Start” button on right bottom of the main interface, you can begin the conversion. All the tasks of conversion will be finished at fast speed and high output quality.
    http://www.4easysoft.com/guide/creative-zen-video-converter/steps.jpg
    Tips on editing videos:
    1: Capture your favorite picture.
    Just click the “Snapshot” button to save your favorite image.
    2: Merge videos into one file.
    Just check the “merge into one file” option if you want to merge the selected contents into one file As default the merged file is named after the first selected file (either a title or a chapter)
    3: Select preference
    Click the “Preference” button and a dialog pops up, you can select the output destination, the Snapshot foler, the format of the snapshot image. You can also choose to shut down your computer or do nothing after your conversion. You can also select the CPU usage.
    4: Trim video
    You can get any clip of your video and put it on your zen.
    5: Crop video
    You can crop your video by selecting your video mode, setting crop values, or drag the frame.
    http://www.4easysoft.com/guide/creative-zen-video-converter/tips.jpg
    Ok, just enjoy movies and music with your Creative Zen player now!
    More useful tools:
    MP4 Converter is a powerful MP4 Video Converter which is designed to convert almost any video formats to MPEG-4 standard formats; WMV Converter provides perfect solution to convert common video formats to WMV with the best quality of picture and sound; Apple TV Video Converter is the excellent Apple TV converter software to convert all video files such as AVI, MPEG, WMV, MP4, MOV, RM, ASF, 3GP, VOB, etc, to Apple TV movies.
    Edited by: user11254370 on 2009-6-9 下午11:58

    Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

  • Best Video Converter Software

    Hi,
    I would like to know which is the best video converter software for my MBP.
    the software should convert files very quickly, most software takes too much time.
    So, please help me to identify one.
    Thanks.

    Handbrake is a good program, handles most formats and will output files compatible with many devices
    As to speed: this is down to CPU and RAM.

Maybe you are looking for

  • Software does not find the Database server

    Hi all, We are going to move database from old server MSSQL 2005 Express to the MSSQL 2008 R2 STD. For test I backuped DB from old server then restored at the new one. For some reason the software does not find the new server. I checked everything as

  • ITunes takes ages to load

    When it finally does it takes ages to be able to select anything and when I plug in either my iPhone or iPad it freezes and has to be shut down throughout the control menu. Everything else starts and play correctly on the laptop

  • Getting to a share from my Powerbook to my XP machine

    I have a shared folder on my XP machine and I would like to get to it from my Powerbook G5. I have a workgroup defined as Connection and I also have a Linux server on the network. The Mac sees the Linux box and I can read/write to that machine with n

  • I forgot my administrator login and password and there are no hints....I've tried all the common ones I've used in the past......is there a way?

    Holy cow....I've forgotten my admin user name and password for my mac air......going on a long flight today and would like to use it. Don't use it often...is there a way to retrieve or reset those? I feel like a real dork!

  • MDM Sender Channel - reading file name

    Hi all, Is there any simple way to read the name of file sent by MDM when I am using MDM sender adapter ? I know if it's file sender channel, then we can read file name by writing a UDF. But just wondering about MDM sender adapter. Regards, -Shankar