Best Video Drivers For iMac G5 PPC

Ok now that the debacle caused by the ATI Drivers is over, Is there a recommended driver which provides the best results (ie. Fast, High Quality, Low Resourse) I seem to remember downloading one which enahnced Quartz (long time ago) I also recently came across drivers from ATI (Circa 2005) ATI Displays 4.5.7 and ATIccelerator II 1.0.6b which appeared to be improvements. Any suggestions?

I do not have the iMac G5. 
My assumption is that your G5 has a hardware problem with video circuitry. I'd assume in safemode the software is doing the video rendering where as in a normal boot the hardware does the video rendering. In normal mode bad hardware means no workie.
You did a clean install, I assume.  The software is good!  Your machine worked before with this software.  All points to a hardware problem.
It is quit clever of Apple to get your machine working using safemode drivers.
Software problems can be strange.  Never hurts to try, but the chances of success are infinitely near zero.
Robert

Similar Messages

  • Locating drivers for Imac 24" (Early 2008) to work with Vista 32 bit

    Hi all. I'm really having trouble with my Mac and was wondering if anyone has an alternative.
    I have an Apple iMac "Core 2 Duo" 2.8 24-Inch (Early 2008) running OSX 10.5.8. I recently partition my hard disk using Bootcamp and installed Windows Vista 32 bit.
    This is where the problem starts. I misplaced the driver DVD's that came with the mac and i am in dire need of the drivers especially for the video card (ATI Radeon HD 2600 pro). I was able to download the drivers for the video card but, anytime i try to install or play a game for example, Call of Duty 4: Modern Warfare it always give me a error that no drivers were found and the game crashes.
    Has anyone else encountered this problem?
    Does the Apple website provide drivers for Imac 24" drivers for Windows Vista 32 bit?

    Patrick,
    Welcome to Apple Discussions.
    You will either need to find your install discs that came with the computer or contact Apple and they will replace them for a nominal charge.
    Going forward keep these and other original installation media in a safe place.
    Regards,
    Roger

  • Best video card for Archlinux?

    What is the best video card for Archlinux distribution?
    Is it possible to make Radeon HD 4870 work somehow in Archlinux, the same way like it works in Ubuntu?

    Just see what drivers are you using with your ubuntu install? Catalyst/xf86-video-ati/radeonhd and install the same on arch.

  • Dont find the correct video drivers for my T61 + windows 7 ultimate + intel pm965 video card

    Hi Experts,
    I am keep getting the stop error 0x00000116 failing with a blue screen while im browsing. I have observerd this quite a few times and also I could not find the correct video drivers for my t61 thinkpad in the ibm site. I could see the details as wxp & windows vista but not for win 7. Please find the link below which has all the video drivers fro t61. Please help me find the correct customized video drivers fro my t61 + win 7. Hope you understand my problem.
    By the way i just use for home computing and my win 7 is upto date wiht no extra software and games installed. I dont play games at all on my t61.
    my t61 specificaitons : http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67883
    If you see the link http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67853
    if u search in the baove link ,you cannot find the video drivers for t61 + win 7. You have it only for xp & vista in this section. Intel X3100 (940GML, 945GM, GL960, GM965). there are no video drivers for win 7 for t61. my video card info is
    Video chipsets:
    Intel PM965/GM965 graphics. (15.4 inch).
    my video card is Intel PM965 chipset . Please help me to get the correct customized version of the video drivers for my thinkpad as I am getting this problem with video drivers and its getting restarted when I am in the middle of something. But it works find after that. I have tried to install drivers from intel and its saying i have customized version of lenovo drivers and I should contact you guys. I triedcomplete  win 7 update from windows site and installed all patches and still getting the problem intermitently, but after restart it works fine. No hardware or software changes. Its that I need the correct version of video drivers for win 7. Please inform the lenovo about this and ask them to develop the good video drivers for win 7 + t61 model. Hope you understand my situation.
    Please let me know if you need any kind of info so that i can provide.
    thanks for reading the mail.
    Regards,
    Manu

    Are you kidding me ? You dont work for Lenovo and you are an active volunteer here in this forums. I have seen your replied many times and wont get paid by Lenovo, you are really crazy for ur stufee .Anyways thanks a lot for the link and the original lenovo staff were notable to provide the link and you could. Well I have tried that what you have said nd still I could not get the link, here you go..
    http://www-307.ibm.com/pc/support/site.wss/product.do?doccategoryind=50880&template=%2Fproductpage%2...
    Let me install the drivers from your link and I will reply soon, so who ever search in this forum now , there wont be any problems for t61 windows 7 video drivers because of u. You are awsome.wll reply my results soon.

  • HP laserjet 1020 printer Drivers for iMac

    Please, where I can find out HP laserjet 1020 printer Drivers for iMac OSX 10.9.2 ?
    Thanks.
    JHBarbosa
    This question was solved.
    View Solution.

    Your answer solved my doubts. Now, it's clear to me what I have to do. Thanks.
    JHBarbosa

  • What is the best video converter for DVD to iMovie? Either free or to purchase.

    What is the best video converter for DVD to iMovie? Either free or to purchase.  And one that is 'fool-proof' and very easy to use.  Many thanks, anyone who can advise.

    You want to 'reverse engineer' the compressed mpeg2 DVD file back to something iMovie can use?
    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

  • Best Video Card for non 3d/compositing work in Premiere CS4?

    Hi all, I'm looking to optimize my system where I can to speed up the editing process. I edit 1080p footage from the Canon 5D MKII (h.264 MOV files)using half-res h.264 proxies, but CS4 seems to hang a lot in the timeline view and clips just disappear and instead show green. I'm switching to half-res MPEG-2 (.m2v) proxies now and so far that problem seems to have gone away (still testing), but when timeline display quality is at "High Quality" (vs. automatic) there's still some chop during slow pans (not seen with "Automatic" or "Draft Quality").
    Anyway, I'm looking for the weakest point in my system and suspect the video card. My system is an 2.66 i7 processor, 6GB 1333 ram, 1x160GB sata II HD (OS/Apps), 3x1TB SATA II RAID 0 (paging file, data), and an $80 ATI 4650 512 MB video card running Vista 64.
    So all that said, what's the best general graphics card for editing HD video in Premiere CS4? I don't care about 3d or compositing at this stage, just basic editing of unrendered (timeline playback) HD video, maybe sometimes 1-3 HD layers, some basic color correction effects (b+w, contrast, etc), dissolves, text overlay, some clip speed manipulation.
    Many seem to recommend the Nvidia quadro cards, but I haven't found any information to suggest they help with anything other than 3D/compositing, which I don't need (and therefore don't need to pay the premium).
    There's also the Nvidia CX card, but it's main feature is touted as encoding h.264, whereas I could care less about that and ideally need decoding of h.264 in the timeline to be better. I haven't seen any great reviews on this card of heard of average user testimonials, probably because it's $2k and it mainly marketed as "zoom more fluidly in photoshop, export h.264 4x faster", which seem like minor issues vs. "better realtime playback of HD video".
    I sort of rambled, but if any informed CS4 users can help answer the question regarding the best video card for general CS4 editing use (not 3d/compositing stuff) I'd love to get more insight.

    So in Media Encoder CS4, I tried encoding one of the clips that plays back the least smooth in the Premiere timeline (a slow pan across intricate patterns on a sand dune in death valley) to the following:
    Format: P2 Movie, Preset: DVCPRO HD 720P 30
    (this was the only format in media encoder that mentions DVCPRO HD)
    I noticed when trying to customize the setting, that there is no 30 fps option, just 23.976, 29.97, and 59.94. I just went with 29.97 as that was the closest to the 30 fps of the source MK II footage. The width and height were also unajustable at 960x720 for the DVCPRO HD format.
    Playing the output in the timeline view of Premiere was comparable in smoothness to the m2v file. I looked at my resource monitor during playback looking for bottlenecks, and the CPU does seem to spike at 100% initially when playing this clip back. I reverted to the m2v version and also saw the same CPU spike. I also reverted back to the down-res'd mp4 version, same spike. Moving display quality down to draft does allow for smooth playback here.
    So I guess there's something about this clip that is CPU intensive to play back in the timeline in any of these formats. The original 1080p version plays back perfectly in both quicktime and VLC player.
    Anyway, for now I think I'm content with using the m2v proxies as a big chunk of the clips are fairly smooth, and using a reduced quality display mode for clips that don't play as smoothly is accpeptable for now. At least so far I'm not seeing the hanging/video not displaying (and instead showing a green screen) that I was with the mp4 proxies.
    If anyone has any other suggestions as to how to get smoother timeline playback for these proxies (or the original h.264 .MOV files), however, whether it be a hardware upgrade (e.g. better video card) or a different proxy codec, I'd love to hear them and give it a shot.

  • Best video converter for i-phones

    Hello folks,
    This is a thread regarding the best video converter for i phone. There are lots of videos on youtube and others that i want to be converted. I got many sites that converts the video into mp3 but when i go to download it, It conveys an error that content not supported. Please help me out.
    Some resources claims to download videos or movies directly. But i fear to visit those as there is a threat of entering virus in my device. Here is a link for example:
    Other Best Place To Download Movies

    Are you trying to convert any Quicktime video to an iPhone?  This is a cheap solution for that:
    http://www.dvdxdv.com/NewFolderLookSite/VeeScope/Products/VeescopeConverter/over view.html

  • Best video card for my mac

    Hey,
    I just need help finding the best video card for my Powermac g4 fw800. One that my system can use fully. I currently have a Radeon 9000Pro with 64MB. Thanks
    ~R

    Hi
    The ATI 9800-256MB is currently the best card for your system. Actually, there are no other NEW video cards available.
    BTW, xlr8yourmac hasn't done a video card review in years, they are just a bulletin board/newsletter now. If you are interested in seeing current testing of available video cards, check out:
    http://www.barefeats.com/rad98pro.html
    Regards,
    Dave

  • Best Video Settings For The iPad.

    Hi everyone,
    Does anyone know this ? "Best Video Settings For The iPad".
    Kindly and in simple terms state the best possible settings to be use when converting videos for the iPad that optimizes the entire screen size/ area without a black borderline around your video. it's rather frustrating to have many technical jargons online without anyone giving real pointers at real values in conversion settings.
    Thanks in anticipation.

    Kindly and in simple terms state the best possible settings to be use when converting videos for the iPad that optimizes the entire screen size/ area without a black borderline around your video.
    It is impossible to answer your question without knowing both the aspect ratio of the source file and your personal preferences for displaying it on a 4:3 iPad screen.
    Basically, you have two options here when converting files of one aspect ratio for display on a screen of another aspect. You can distort the original display to "fill" the ipad screen. (E.g., you can make a widescreen movie exactly fill your iPad screen but then people and objects will look tall and skinny.) The other option is to convert at the original aspect ratio and simply use the iPad "zoom" option to force your widescreen movie to fill your 4:3 screen by scaling the height of your movie to fill the screen and allowing the left and right edges of you movie to be cropped from your view. You have no other choices here other than living with the defaulted black areas.

  • Best Video Forma for Logic (?)

    Dears All,
    what is the best video format for Logic actually ?
    I am receiving all kind of video file such as mp4, QT, AVI etc and i want to reconvert for a optimal performance. So, what is, in terms of format size etc ?
    Very, very thanks in advance.
    -A

    Charlie the Tuna wrote:
    Thanks, pancenter, I never would have known this. Compression on the fly? Once I convert/export a file doesn't it simply become a smaller file? If there's compression on the fly, isn't a large file being compressed even more?
    Once you export the file to a compressed format, the codec that does the compression also has to decompress on playback. The DV file is not compressed, it is the native video/audio format, there is no translation when playing.
    An audio example: A 5.5Meg mp3 file is actually a compressed 47.6Meg Wav file.
    In order to play the compressed format the computer (PC, Mac whatever) has to have a codec or audio player of some kind that converts the mp3 to it's native 44.1, 16-bit Wav format. Depending on the codec, it will require some CPU to decompress and play in real time.
    So no, it doesn't just become a smaller file.
    Nothing is free!
    pancenter-

  • Best video card for G4 tower?

    What's the best video card for my G4 tower without breaking the bank?
    I have the dual 500nhz, 2GB ram, OSX 10.4.
    I currently have a nVidia Gforce64mb with a small fan.

    No you're OK...
    There is DVI-I, DVD-D, & DVI-A, DVI-I contains both DVI-A & DVI-D, HDMI uses DVD-D, (Digital), so it can connect to DVI-I or DVD-D.
    Those 4 holes are only used for DVI-A, (analog).

  • What is a good video converter for iMac?  Premiere 6 will not capture from the Canon VIXIA HF G20.

    What is a good video converter for iMac?  Premiere 6 will not capture from the Canon VIXIA HF G20.

    Rather than convert, you'd be better off capturing with a more current version of the program -- one that supports AVCHD video. Otherwise, you're in for a lot of headache. A converter isn't going to solve your problems.
    BTW, when you say Premiere 6, do you mean Premiere 6 -- which is over 10 years old? (There was no Premiere Elements 6.)
    Trust me on this: Capture with a Mac version of Premiere Elements 11 or 12 and your video will be perfectly compatible with any Mac program.

  • Audio and video drivers for IBM Lenovo think center Pc

    Hi
    This is shiva and i require audio and video drivers for the following pcLenovo ThinkCenter M/T -9389-A76 S/N- ****** where to get it please mail me or leave a scrap here , regarding the link. *@*
    Moderator edit: Removed serail number to prevent mis-use. Masked member's email address to prevent it from being scooped up by the spam crawlers. Please use the private Message (PM) feature instead. Click on the member's name>Send this user a private message.

    Hi Shiva,
    You can find drivers here:- http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-66440
    If you have XP then you might require following for audio as well:-
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?sitestyle=lenovo&lndocid=MIGR-65440 [SP1]
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?sitestyle=lenovo&lndocid=MIGR-65456 [SP2]
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • What is the best video converter for high quality MPEG-4 for Apple TV?

    What is the best video converter for high quality MPEG-4 for Apple TV?

    Handbrake won't convert AVI files, But there are many more than those mentioned that will
    The choice of conversion software is a personal choice, I have around a dozen applications that will tackle AVI's, however VisualHub is not one of them, not because there is anything wrong with it but rather I have enough such applications in my arsenal already.
    I would use mpegstreamclip in most scenarios for what you are wanting to do but maybe not always. It is a good idea to have a few applications to choose from as not all do the same thing. mpegstreamclip has a few more options than some bog standard applications without becoming overburdening with choices.
    You might want to try a few applications yourself before deciding on the software for you. isquint is a free limited version of visualhub, you might want to give that a whirl to get a feeling for visualhub.
    Be aware though that quality conversions do not happen quickly, claims of being faster than other applications may well be correct, but are usually a trade off against quality. Again you need to choose your software to reflect your preferred balance between speed and quality.
    Here's how I use mpegstreamclip, http://web.me.com/gartside1104/z008/Mpegstreamclip.html but your AVI's may well be low quality, you shouldn't set the bitrate any higher than your source file and likely lower, you shouldn't increase the frame size either.
    Message was edited by: Winston Churchill

Maybe you are looking for