Best way for capturing HDV

Best way for capturing HDV
using easy setup setted to HDV1080 50i (camera is a Sony HDV HC1) captured video look like sh...
and when exported with compressor is worst!
some idea?

Ok fantastic ! you are right (the frustration was talking for me)
video is shooted in 16:9 HDV 1080 50i
Captured video looks:
full of orizontal lines (that look like scan lines) expecially evident on figure edges and on motion subjects
and
like it was resized 1440x1080i from a different lower resolution
video is exported with compressor
MPEG-2 3.7Mbps 2-pass 16:9
Description: Fits up to 150 minutes of video with Dolby Digital audio at 192 Kbps or 120 minutes with AIFF audio on a DVD-5
File Extension: m2v
Video Encoder
Format: M2V
Width and Height: Automatic
Pixel aspect ratio: default
Crop: None
Frame rate: (100% of source)
Frame Controls: Automatic
Aspect ratio: 16:9
Field dominance: Auto detect
Average data rate: 3.7 (Mbps)
2 Pass VBR enabled
Maximum data rate: 7.5 (Mbps)
High quality
Best motion estimation
Closed GOP Size: 1/2 second, Structure: IBBP
DVD Studio Pro meta-data enabled
In these case the first problem is i can't obtain 16:9 format an the lines becomes more more evidents
software is Final cut Studio HD
camera is Sony HDV HC1e
hope I wrote all the info
Thx

Similar Messages

Best ways for Capturing video using SD cards

Hi
I have a lab of Imacs and we also have mostly Canon FS200's with SD cards. I'm experimenting with different software to capture the video using both streamclip and IMovie, but find that both will cause problems. The biggest problem is that the audio is out of sync. Is there any way to use final cut Pro version 6 that will accomplish this task more efficiently? Or should I use some other program?

The manual is embedded in the application. You can access it from the help menu and open it in Preview. Save it as a separate PDF. Or you can hack the application contents and copy it from there. PDFs are much better any way as they search incredibly quickly compared to trying to search an index that spans three volumes.
I didn't realize I was replying to you X. I meant to respond to the original poster.
Message was edited by: Tom Wolsky

Best Scheme For Capturing For Best MPE Performance?

So let's say I'm still capturing from MiniDV tape @ 720p24. What's the best scheme for capturing for best MPE performance? I have a new HP Z800 with (so far) one i7 4-core with 12 gigs of ram and an Nvidia GeForce GTX285.
[moved from the FAQ forum]

You have to forgive me. I've been using Matrox RT.X2's for so long, I didn't realize there were no codec options when capturing from HDV tape, like there is with the RT.X2. So now I wonder how the MPE handles the playback of HDV captured footage.
I'm anxious to see what my new HP Z800 with one i7 quad core, 12 gigs of ram and Nvidia GeForce GTX 285 can do with PPro CS5. I got it two months ago and haven't even turned it on, waiting for CS5.

What's the best way to capture speech as text in live or recorded Adobe Connection sessions?

Hi
What's the best way to capture speech as text in live or recorded Adobe Connection sessions?
We would like to have a transcript of the presentation. Is Adobe Connect compatible with Dragon speech recognition software - or is there a preferred Adobe product or method?
We use PCs running Windows 7 Enterprise.
thanks

The class java.util.Date is not itself deprecated, however several of its methods are.
For converting string -> date, you should use the class java.text.SimpleDateFormat. That allows you to specify format strings such as MM-dd-yyyy hh:mm:ss for converting date -> string -> date.
If you are wanting to set day/month/year on the date object directly, instead of the Date methods setDay, setMonth, setYear, you should instead use the java.util.Calender class:
calendar.set(Calendar.MONTH, 4);
The calendar can then be converted to a Date object by calling calendar.getTime().
If you are going to use the date as part of a sql query, I would recommend using a Prepared statement, and the java.sql.Date/java.sql.Timestamp class as well.
To convert from java.util.Date to java.sql.Date)
jva.util.Date utilDate = Calendar.getInstance().getTime();
java.sql.Date sqlDate = new java.sql.Date(utilDate.getTime());cheers,
evnafets

What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
Thanks

Hi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy

Best way for building an application main frame

I'm about to program a desktop application.
The main frame will have menus, toolbar, status bar etc.
There will be a lot of interaction between the menus, toolbar buttons and other custom gui components (such as an editor).
My question is which is the best way for building it.
Cramming all the code in one class file is out of the question.
I thought about making my own custom JFrame and add API functions like for it so different GUI elements can be accessed.
Each component which will be manipulated will be in its own class file with the constructor accepting a reference to my custom JFrame object which it is contained in.
Any suggestions on the matter would be of great help since I've never done extensive Swing programming before.
P.S.
The application makes extensive use of RMI.
What considerations should I take into account (except using SwingUtilities.invokeLater()) ?

Hi,
I have replied on this subject somewhere else today but what I do is have one simple entry point where I just instanciate a JFrame.
On that frame I have a main JPanel. On that panel I add new objects like JPanels, tabs etc.
I keep each new panel in a separate source as it is easier when the application grows, and it will. That also means that several programers can work with the same application without interfearing each other.
I hope you understand what I mean the the thing is to split up the code into several sources.
It may not suit everyone but I found this approach to be the best for me.
Klint

What setting or codec do I use for Capturing HDV 1080i HDV

What setting or codec do I use for Capturing HDV 1080i HDV

Not enough information. The settings you use depends on exactly what format you shot and what device you're using to capture.

WHat is the best way for other iphone users to share pictures with me? I am doing a project which req. people to send me 100 pictures at a time that I'll be putting in my iphoto?

WHat is the best way for other iphone users to share pictures with me? I am doing a project which req. people to send me 100 pictures at a time that I'll be putting in my iphoto? thank you.

ingridlisa,
I'd suggest to ask them to create Shared PhotoStreams and to invite you to view the streams, see:
iCloud: Using and troubleshooting Shared Photo Streams
Regards
Léonie
Added:
that I'll be putting in my iphoto?
Will you be collecting the photos in iPhoto on your iPhone or on a Mac? On a Mac a Shared PhotoStream requires Mac OS X 10.8.2.

Acrobat Standard XI, but can only find the CD for windows. I have a mac (I have access to an external CD drive and I have the product keys for windows). What is the best way for me to install it?

Hi, I purchased Acrobat Standard XI, but can only find the CD for windows. I have a mac (I have access to an external CD drive and I have the product keys for windows). I have never installed it anywhere else. What is the best way for me to install it?

Hi lintonm86921521,
I can understand your concern & will guide you through this.
I am so sorry to inform you that Acrobat XI Standard is not available on Mac, you can only use it on your Windows computer.
You can also refer to the system requirements at : System requirements | Acrobat family of products—older versions (XI, X, 9)
In case if you have any further query please let us know, we will be happy to help you.
Regards,
Aadesh

HT4914 I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?

I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?

Is/was failing or has failed?
If the old computer still runs one of these methods may be best.
Method 1
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
I'd recommend method 1 since it establishes an ongoing backup for your library.
I don't have personal experience with iTunes Match, but in principle you should be able to download all the tracks currently registered to your iTunes Match account. This isn't quite the same as restoring your previous library exactly as it was. There is always the potential for iTunes match to provide the wrong version of a song and could be content such as movies, podcasts, audiobooks etc. that would have been excluded.
tt2

I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

You will need a Mac, with OS X 10.6+ on it, to be able to develop iOS apps.
There is some info on these pages :
developer site : https://developer.apple.com
developing for iOS 7 : https://developer.apple.com/ios7/
developer support : https://developer.apple.com/support/
developer forums : https://devforums.apple.com/index.jspa (you will need to be a registered developer to access them)

Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC

Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC. I would appreciate any help with this.

Thanks for the quick help. I do have to leave for work. When I try to
download the images from the camera they seem to only be in jpeg (I don't
see any rw2 or raw files to download). If I select the jpeg file it seems
to only download a jpeg file. I do understand that I do have the option to
open the jpeg in RAW. In doing this, is all the extra information included
in the RAW file there or is it lost coming from the camera
Once again thank you for trying to make me understand how this works.
Have a great day.
On Sat, Sep 13, 2014 at 12:14 PM, ssprengel <[email protected]>

Best way for Email Notifications in EWS Managed API 2.0 [ Exchange Server 2013]

Hi ,
I want to know best way for Email Notifications in Exchange server. My
organisation has
10 users, i want to get notification if any user mailbox got any new mail.
i need to create API,
that was consumed by another Team in their Application.
I am using Exchange server 2013.
Please share Your Ideas.
Thank you

Take a look at EWS Notifications
http://msdn.microsoft.com/en-us/library/office/dn458791(v=exchg.150).aspx .
Cheers
Glen

What is the best way for using a C++ in the EJB?

What is the best way for using C++ in the EJB ie
either 1. Socket programming
2. JNI

To what purpose?
To use C++ in the client you could generate IDL from your remote interfaces and run that through your vendor's IDL-to-C++ processor.

Which is the best way for posting a large number of records?

I have around 12000 register to commit to dababase.
Which is the best way for doing it?
What depends on ?
Nowadays I can't commit such a large number of register..The dabatase seems hanged!!!
Thanks in advance

Xavi wrote:
Nowadays I can't commit such a large number of registerIt should be possible to insert tens of thousands of rows in a few seconds using an insert statement even with a complex query such as the all_objects view, and commit at the end.
SQL> create table t as select * from all_objects where 0 = 1;
Table created.
Elapsed: 00:00:00.03
SQL> insert into t select * from all_objects;
32151 rows created.
Elapsed: 00:00:09.01
SQL> commit;
Commit complete.
Elapsed: 00:00:00.00
I meant RECORDS instead of REGISTERS.Maybe that is where you are going wrong, records are for putting on turntables.

Best way for capturing HDV

Similar Messages

Maybe you are looking for